How to power a CPAP while Overlanding.

If you suffer from sleep apnea, don't let it stop you from getting outside and camping!
Here's some non-affiliate links for some stuff I mentioned in the video:
Ecoflow River Pro 2:
us.ecoflow.com/products/river...
ResMed Air Mini 12v adapter: (Warning - Not condoned by ResMed to work with Airsense 11)
shop.resmed.com/en-us/sleep-s...
Follow me!
Instagram: / newnewchris
KZread: / @newnewchris
Twitter: / newnewchris
Prints: newnewchris.darkroom.tech/

Пікірлер: 6

  • @sunshine_state_sequoia
    @sunshine_state_sequoia5 ай бұрын

    “Take 15. Good morning everyone ” cracked me up for some reason 😂

  • @NewNewChris

    @NewNewChris

    5 ай бұрын

    The best version of this was shot on manual focus and completely blurry. Forgot to put af back on after shooting astro the night before. 🤣

  • @pattishelton3169
    @pattishelton31695 күн бұрын

    I have the Eco River Max 2 just purchased. I have no idea the watts with my Cpap is? How do I find out? And where do I get this connection thing you talk about? I can’t sleep without my cpap so, I purchased this Eco thing for power outage with the solar panel. I don’t think I have a cord long enough to use the solar panel and keep the battery in the shade at the same time and I don’t know how to buy a cord? I know I don’t know very much, help? I looked on my cpap for the wattage it’s no where? It’s a Phillips

  • @NewNewChris

    @NewNewChris

    5 күн бұрын

    These devices tend to draw different amounts of wattage as they run and it varies depending on settings so the easiest way is to plug the power chord into your ecoflow and run the device. As it runs, look at the battery display and pay attention to the watts being used. Take the highest wattage it shows and assume it will draw that many watts per hour. That’s a very rough estimate but it will get you by enough to do some power need calculations. The dc connector I use is proprietary to my brand and model, so you’ll have to do some research to find what dc plug will work with your Phillips cpap as I don’t own one so I don’t know specifics. For solar panel cables, that will also depend on what type of solar panel you have and what connectors it uses. Most use an mc4 connector. The instruction manual should list that. Once you find that out, get that type of connector on one side of the cable and on the other side make sure it has an xt60 or xt60i connector, as that’s what the Ecoflow brand uses. I’d recommend xt60i as it can push more power into your battery. Amazon has lots of cable options. Hope this helps!

  • @apf20
    @apf205 ай бұрын

    Well done, now if I die in the wilderness, it will be because of a large animal attack instead of smothering in my sleep.

  • @NewNewChris

    @NewNewChris

    5 ай бұрын

    Next video: how to use your cpap as a bear defense.