Here is the link to the documentation about NAT: help.mikrotik.com/docs/display/ROS/NAT Have fun (seriously) :)

Awesome Saint Javelin t-shirt! Thanks for support both informational and hardware. Love you guys!

@iradeourum

2 ай бұрын

Is it a form of worship to governor's boot between breeches?

Yo have so cool t- thist, thank for wearing it ! Дякую вам за те, що ви з нами !

THANK YOU!, I finally got my minecraft server to work, i have littarly spent over 10h trying to fix it.....😄

To the point and accurate. Thank you.

We dont need to add any filter rules to allow the NAT connection?

A question ??? I have the Clients in PPPoE mode on the Mikrotiik CCR1009-7G-1C-1S+ but I want to add a MyCloudPR4100 NAS For Movies.. OK my Question how can I Install it on the Mikrotik CCR1009-7G-1C-1S+ So that my Clients can see it ???

Hi normis, in the next video , would be able to explain us what input/output dose for NAT on v7

@mikrotik

2 жыл бұрын

you can use the new input chain for some rare and complex scenarios, where your address should be changed before or after routing actions take place, see stuffphilwrites.com/wp-content/uploads/2014/09/FW-IDS-iptables-Flowchart-v2019-04-30-1.png

I need help with a mikrotiq extender

hi i need help i used winbox used the firewall NAT setted up tcp and udp dstnat because you need both for rust server and still it doesnt work i need help :D

Thanks for explaining. I am new to mikrotik still it is interesting, I need suggestion and help please, I have two mikrotik routers having different isps as well as different local networks " each ", however I connected them to each other through interface " 4" and I need to forward SIP telephone from one mikrotik to another another, is there any guide to do that? Thanks in advance...

@mochouinard

Жыл бұрын

There is a lot of ways to do it depending of your requirements, but if your SIP server had a static IP, you could add a static route on your network where you have your SIP device and put your SIP server as the destination and put the gateway as the IP of your second router where you want the traffic to go though. Just make sure the second gateway have route to reach back the main client.

Rule added by quickset is wrong. It will do dst-nat to all of packets coming from wan to lan AND from lan to wan. If you will add rule to port forward tcp:80 to 192.168.88.99:80, it will break all connections from lan to wan:80. It is because of in-interface or in-interface-list is not added.

@mikrotik

2 жыл бұрын

You are completelty right, good eye. We will fix this bug, thanks!

@johnrauner2515

2 жыл бұрын

Yes but you can add these in the NAT list. From his explanation this is clearly designed as a quick and simple way to forward specific individual ports to single IP's, not the blanket and generic forwarding you mentioned.

@TalOrmanda

Жыл бұрын

@@mikrotik When are you fixing this? I just ran into this problem.

@magundah14

Жыл бұрын

@@mikrotik any update on this? I found a workaround, but having a simple way of port forwarding would be great

@ikhsannahdillah

Жыл бұрын

Thanks sir, its very help

I open correctly port on pc, but block the internet connection why?

Great t-short 😇

You should add a Disable option into the Quick Set's Port Mapping, like in Firewall tab.

Why is your RouterOS set to v7.2.3, whereas mine is 6.49.6? Note: I have checked for updates and installed the latest updates according to my Winbox application. Perhaps you have different hardware and v6.49.6 is the latest OS for my hardware? Thank you for the video, and I love Mikrotik :)

@mikrotik

2 жыл бұрын

Choose upgrade channel UPGRADE, this at you can move to next big version

I'm trying to figure out port forwarding but this doesn't look anything like my router which is model hAP ac Lite. I'm in the UK, are they different here?

@mikrotik

2 жыл бұрын

No, the interface is identical. Are you connecting to the right device? Send us a screen capture, email support@mikrotik.com and we will help

@symix.

2 жыл бұрын

@@mikrotik I had the same problem, but figured out quickly that I was running routerOS v6 still on my router -> no port mapping, I have had it for year, I always though System -> Auto Upgrade being empty that there were no updates available, found out now that the updating part is actually in quick set menu lol

Saya dari indonesia terimakasih informasinya sangat membatu saya

I am very "anti quickset". Opening Quickset and hitting apply on ANYTHING has broken running configurations, more than once. Could an option be added to hide quickset in winbox? Also... On NAT... Maybe show people how to use IP cloud to make NAT rules more specific.

@mikrotik

2 жыл бұрын

Quickset should not break anything, if you do encounter such a scenario, let us know. By the way, closing and not using Quickset is also an option :) Why disable

@LuLuXDCraft

2 жыл бұрын

​@@mikrotik Quickset break the configuration when the PPPoE credential of the ISP need a VLAN Tag, if you apply you loose the connection. For the Quickset menu only eth1 or SFP can be WAN. But that not a big deal, more you dig in routerOS, less you need Quickset.

Last time I understood this properly was when I configured firewall on Slackware Linux in 2003 or so for dial up internet and one small company using iptables. But what I found somewhat weird on Mikrotik - I could not make it work. I used textbook example from manual. I tried to copy this rule to input and forward and nothing, not a single packet captured by rules. After tens minutes, I disconnected phone from wifi, used termux and ssh, it worked. It somehow seems like if connection comes from internal network, to WAN IP address, it's not captured. Is there a way how to fix this? Something like if destination IP from whatever interface matches IP assigned to router by DHCP then forward port 2222 to homeserver:22?

@mikrotik

26 күн бұрын

Post your config on our forum forum.mikrotik.com

@pavelperina7629

25 күн бұрын

@@mikrotik Thanks, I solved it using claude ai. problem is missing SNAT rule for server reply - by default, it contacts client directly, so there's mismatch between request going to WAN IP and reply coming from server's IP.

Great, I added the Nat rule usign the advanced menu, but didn't work. Then I went to the same process using quickset and that did the trick. Strange, both rules were the same hahaha.

There is no button called port mapping in my winbox

can i specify which ip addresses can connect on my network?

@mikrotik

7 ай бұрын

Yes, you can use the src-address property help.mikrotik.com/docs/display/ROS/NAT#NAT-Properties

UPNP can be dangerous :) Someone printed a page on 80'000 printers because of this. There's an episode of darknet diaries about it. So if your router, devices and software has UPNP enabled. It can open ports you don't know about and don't need to have open to the internet. Manually you can limit access from certain countries, an ISP, IP range or even a single IP address.

@mikrotik

2 жыл бұрын

You have to manually enable it also in the app, so at least you can’t have such things happen without knowing. Also, what printer needs to open ports from the internet? Curious 🤨😂

@hariranormal5584

2 жыл бұрын

Yep, UPNP is as dangerous as "manually opening ports" You need to have whatever program to actually open it, instead of you doing the opening manually you let the app do it.

I have a problem. Couldn't add new port mapping - WAN port list missing Can You help me?, please

@robkojabko

Ай бұрын

have you ever solved this?

i have container inside MikroTik, how to forward the port?

@mikrotik

11 ай бұрын

We talk about it in this video kzread.info/dash/bejne/h4GXrNVtn9yudM4.html

i did all you said but still my freinds couldnt connect to my server

Awesome background 💛💙

This must have been changed since then. following these instructions leads to an error "Couldn't add new port mapping - WAN port list is missing (6)"

@robkojabko

Ай бұрын

have you ever solved this?

@maddmethod5880

Ай бұрын

@@robkojabko yeah, I bought a ubiquiti UDM SE

@hexandcube

22 күн бұрын

​@@robkojabko In Winbox, go to Interfaces>Interface List> Click on Lists > Add a new list and call it WAN > close the Interface Lists window>then in Interface List add your WAN interface to the WAN list

No port mapping button for me 🤷🏾‍♂️

all i wish from winbox is ability to hide config menus for users :( there are so many i want to hide some for myself.

@mikrotik

2 жыл бұрын

There is such possibility. Will make a video about it

Nice T-Shirt, very strong statement!🔨💪

I have an Ubuntu server from America and I have a MIKROTIK device at home (local) I want to connect my Ubuntu server to Mikrotik at home using ssh port Because in Iran VPN works with ssh port When I connect the ssh port of Ubuntu server to Mikrotik, my web traffic can open all sites Like a VPN server can pass traffic I request you to send me the tutorial for this item Or tell me its instructions Or send me a video tutorial of it Here we are under very bad conditions in terms of filtering sites And we cannot connect to the sites

Nice T-Shirt! Thanks from Ukraine! And thanks for the manual!

It's a good video, but if you're using Minecraft as an example, you should use port 25565, as you can mislead unfamiliar people. :)

hi, l2tp + ipsec is very slow, around 1Mbit. how to fix speed?

@mikrotik

2 жыл бұрын

On what kind of device?

@BlackDwarfa

2 жыл бұрын

@@mikrotik CRS112-8G-4S-IN

@normis99

2 жыл бұрын

@@BlackDwarfa this is a switch. You need a router to do VPN

@BlackDwarfa

2 жыл бұрын

@@normis99 ok, but it works. it's not big problem...

@urZcszyYo3TMEDmW

2 жыл бұрын

move to wireguard?

In case anyone is getting the "Couldn't add new port mapping - WAN port list is missing (6)" error message, here's how to fix it In Winbox, go to Interfaces>Interface List> Click on Lists > Add a new list and call it WAN > close the Interface Lists window>then in Interface List add your WAN interface to the WAN list

Love the t-shirt lol

Love the t-shirt!

valheim mentioned

L2TP hungup disconnected every 2 minutes. I do not understand how incompatibility between devices of the same brand is possible.

@mikrotik

2 жыл бұрын

Need to check logs. Devices can’t be incompatible, but configuration can be incomplete

What about a video: how to setup 802.11r fast roaming? 😏

@KnaufL

2 жыл бұрын

@@orgind7778 the original comment was sarcastic and aiming at a lack of 802.11 k v r and wave 2 and wifi 6

Дякую!!!

25565

Thanks, nice t-shirt

like

Cool t-shirt!

And let holy Javelin bless you.

great tutorial except it is not working on default mikrotik config. congratulations for posting not working tutorial

Why when i trying to telnet (public ip : forwarded port) , in terminal shows up this massage: 04:49:26 echo: system,error,critical login failure for user enable from 89.37.95.164 via telnet. And when i paste my public ip in search - it redirects me to Mikrotik login page

@mioqwe

2 жыл бұрын

And my friends cant connect to minecraft server :) Слава Україні!!!

Like for T-Shirt

For the uninformed of us, the image on the shirts is one of "st. Javelin". A photoshopped icon of Mary hold a Javelin missile launcher.

@mikrotik

2 жыл бұрын

Not just that, it's a symbol for a movement

@alexandroskolkov2231

2 жыл бұрын

@@mikrotik Wolfsangel it's a symbol too. as a black sun. what's your next t-short ?

@asphacean

Жыл бұрын

​@@alexandroskolkov2231 burned ruzzian flag

Very nice shirt!

Nice T-Shirt and background

Nice shirt 🚀

Nice shirt!

That studio colors and Normis shirt, THX Normis/Mikrotik. You are AWESOME. SLAVA UKRAJINI !!!

fuu

1:32 until he stops talking about the obvious and starts explaining how to do it

@johnrauner2515

2 жыл бұрын

Actually mate I think everything you said before 1:32 is the very reason why somebody would watch your video in the first place.

@johnrauner2515

2 жыл бұрын

When you did get on topic your advice and description was clear and precise and easy to follow. Thank you. Really helpful.

Nice shirt)

Nice lighting !

@mikrotik

2 жыл бұрын

Thanks, hope you like the shirt too :)

@garyprice3757

2 жыл бұрын

Maybe the next video could be on blocking Countries by IP address lists?

@blackland1233

2 жыл бұрын

@@mikrotik I was a mikrotik user, but no more. Instead of you working on network related topics, here you go promoting weaponry and death by association. Team Ubiquiti it is from now on 🙂 Nice way loosing your customers.

Nice T-Shirt 👌

Wine sucks! Mikrotik should build a proper Winbox for MacOS.

@mikrotik

2 жыл бұрын

Did you watch the video at all? 🙄

@supra107

2 жыл бұрын

Skip to 7:05 and listen closely.

MIkrotik now focused mainly on consumer applications. Minecraft, seriously? Don't you need to specify the dst.address literally, or dst. address type 'local', so it only acts on the router's IPs? That's how I've always set up dst-nat.

@mikrotik

2 жыл бұрын

We still make 100Gbit switches and routers, check our other videos. Yes, there are many ways to set up DST-NAT, you can specify interfaces etc. There are many ways to set up a MikroTik ;)

@romain3877

2 жыл бұрын

Technically, profesionnal/power user know what is a NAT and how it works. it's more for home user who have a mikrotik router in their home (from their ISP for exemple).

Why couldn't you just simply cast the desktop screen instead of showing a fancy studio...... seriously........................................ try following the video on your own

@r4jin

Ай бұрын

the more I watch the angrier I get. seriously...

Nice T-shirt Javelin for more freedom 🙄

Hi from Ukraine 💛💙

T-shirt 5+

God bless Saint Javelin! Slava Ukraini!