Love this video. I’ve watched it about 4 times. Will be polishing my quartz in the next week. Thank you.

@NSITools

2 жыл бұрын

We're glad you like this video. We do our best to be real and show our tools at work in a real granite shop. Please remember this kit is for natural granite and natural quartzite and not for use on engineered stone, commonly called Quartz. If you need help with an engineered stone product please let us know (info@nsisolutions.com) and we can point you to a good place to start.

Great video. I have been using these tools for a while but have not been able to get the cloudiness removed after the 3000 grit using the top polish. Turns out the instructions on the product are vague and your demonstration helped me understand I was using too much water (instructions specify 1 Tbsp per 1 tsp of polish compound). Thank you for posting this!

@NSITools

2 жыл бұрын

We're glad the video helped you out. The MB-20 is a great product.

Always the best, thank you

@NSITools

2 жыл бұрын

Thank you too!

Thanks for awesome video and instructions!

@NSITools

4 жыл бұрын

Glad you enjoyed it!

Great job man thanks for the tutorial!

Great demo!

@NSITools

4 жыл бұрын

Thanks - we are working to improve our KZread channel with new content and a more professional look

Amazing job. Great tutorial.

@NSITools

Жыл бұрын

Thank you

i dont have any scratch on Granite/Marble what grade of Grit can i use to make it shine like a new. Thanks i am continuing to watch your video.

@NSITools

2 жыл бұрын

I would try just the MB-20 and the tan fiber pad first. This would only be for true granite. If is marble you need to use a marble polishing compound. If you contact us at info@nsisolutions.com I can put you in touch with a vendor that can set you up.

Brilliant

I got a customer that brought me the video of you guys polishing the vulga blue. I have been top polishing with turbo and ceramic buff pads for years. I'm gonna order your kit tomorrow and give it a try.

@NSITools

3 жыл бұрын

We show an air polisher in the video but it can be done the same way at slow speeds with an electric polisher in a home. As mentioned in the video make sure to keep the resin pads completely wet (not wet-to-dry) and probably use less pressure than you are use to with your current system.

@devonhopkins2122

Жыл бұрын

Did you like the new system? Mine just came in today and I realized it wasn't the rigid turbo pads I was used to so I was getting ahold of my supplier to get the turbos because I wanted to use what I have always used, but I'm interested if you liked it?

@FOUCHFABS

Жыл бұрын

@Devon Hopkins i ended up not getting it. Actually still using the original turbo pads.and integrated in the monkey pads they made for quartz and the ceramic buff. I have had success with that on stones that i struggled with prior.

hi Kris can I use this pad for marble and quarts? or what you recommend for marble and quarts but doing the same process

@NSITools

3 жыл бұрын

Our kit is specifically designed for true granite and natural quartzite. On marble the turbos will work perfectly up to 1000 grit. The Redeemer Resin pads may work but you would need to try them on the specific stone. On marble also you will want to finish with a marble specific polishing powder/liquid. For quartz (engineered stone), again the turbos will work to remove the scratch but you need to use some quartz specific resin pads and polishing compounds. Also, you may need a foam backed hook and loop pad to help match the texture. For quartz repair i would contact Jim Lang at Surface Savers and look into his Quartz Renew system.

thank very nice video

@NSITools

2 жыл бұрын

Most welcome 😊

Kris, nice demo. good explanation. how does this flexible turbo two step or three step compare to an Alpha Ceramica 500(red) and 1000(green) + polishing compound? Is it faster or easier? Is the gorilla hair pad as good as a normal white felt pad for polishing compound? Do you have another video on efficiently cleaning up water etched marble, particularly in place vertical shower walls?

@NSITools

4 жыл бұрын

Hi Larry! We are so glad that you liked our approach to Top Polishing and Kris's demo of our NEW kit. Compared to the Wet-to-Dry method normally used with the Alpha Ceramica pads, our resin pads require less downward force and should NEVER be ran dry. Our process is considerably easier to attempt on a larger variety of granite & quartzite surfaces. It is also easier for fabricators to address regardless of their body size and skill level. As far as faster, that will depend on the experience using the kit and size of damage one would be addressing. The Natural Blend Tan Pads are amazing on granite and were a suggestion from a fabrication friend in Hawaii, once we started playing around with this material, we hardly looked back. They last longer, don’t get as gunked up with polishing compound and seem to polish faster. Right now, we do not have any “Marble” specific video’s or techniques, however we are working on more video and can’t wait to see how we can help with specific project moving forward. Follow & Subscribe and send us an e-mail regarding how we can help: info@nsisolutions.com

Does nsi make the floating turbo with a velcro backed solid backing for floor machines? (175 swing machine)

@NSITools

4 жыл бұрын

Sorry - I'm not sure what you are asking for exactly. We don't make anything specifically for floor machines. You can see our entire line of SL3 products on our webpage here: nsisolutions.com/sl3-subpage-2/

Would this product work on light stain and dull area on my white and Gray quarts counter top?

@NSITools

3 жыл бұрын

Our kit is specifically designed for natural granite and quartzite - not man-made or engineered "quartz". If you email us at info@nsisolutions.com I can point you to some reputable quartz repair specialists.

Where are u located at?? I need some scratches removed from quartzite countertops

Do you have a recommendation for someone who uses this system for a repair in South Palm beach area?

@NSITools

2 жыл бұрын

Unfortunately we don't know anyone in your area. If you contact us at info@nsisolutions.com I can give you a couple company names to start with.

Si very good 👍

@NSITools

7 ай бұрын

Thankyou

Would this remove sporting and ruffness on quartzite countertops?

@NSITools

3 жыл бұрын

Natural quartzite - yes in the hands of an experienced fabricator.

Awesome video.. is nsi ever gonna make a 3 in flex backer for the adaptor.. itd be pretty cool to fab and polish a whole job with the adapter system.. (speed)

@NSITools

4 жыл бұрын

Hi Roger, We have a 4" FLEX Backer perfect for inside curves: nsisolutions.com/product/sl3-4-flexible-hook-and-loop-backer-3-6-actual-diameter/ You might also want to check out our 3" FOAM Backer, great for an Ogee edge: nsisolutions.com/product/sl3-3-foam-hook-and-loop-backer-3-0-actual-diameter/ I am sure these two backers will find a place in your shop. Others have reach out with specific needs and it's how we've continued to develop our solutions. We are constantly addressing problems in the stone shop and developing easier ways to get better results. Please feel free to reach out to us at info@nsisolutions.com, we'd love to hear from you. Thanks for the suggestion! Cheers. NSI Team.

@rognegrete79

4 жыл бұрын

awesome

@NSITools

4 жыл бұрын

If you need help finding a distributor to get these let us know. We are hoping to be more involved with our fabrication partners moving forward so let us know how else we can help, perhaps with training videos or showcasing some of your work on our other social. Have a stellar rest of your week!

@rognegrete79

4 жыл бұрын

NSITools thanks will do

Hi, i plosihed my black marble stone coffee table up to a 6000 diamond wet pad but I'm not getting the black gloss. Is it because my type of stone? Or do i need a colour enhancer? I don't get it , the stone looks black only when it's wet, after it drys it looks dull and white kind of finish. The surface it's Very smooth afte the 6000. Do i need to buff with a diferent pad?

@NSITools

Жыл бұрын

Stone polishing kits are typically tailored to a specific type of stone. Our kit is made for natural true granite and natural quartzite and we do not currently sell any products specifically for marble. My guess is that you need to use a final polishing compound specifically formulate for marble. If you contact me (info@nsisolutions.com) I can point you to a good place to start.

No safety goggles? Very informative video, it turned out vey nice, good job!

how would one go about fixing a super minor micro-scratches caused by the rough side of a sponge during some wiping? they are very faint and cant feel them, but definitely visible. thanks so much. super useful videos

@NSITools

2 жыл бұрын

You might be able to repair them with just the MB-20 paste and tan fiber pad. Contact us at info@nsisolutions.com and I can put you in touch with a vendor who can help.

#smooth

Great detailed video. I own this kit and have used it very successfully 2-3 times. This las time I used it to top polish a quartzite seam I had trouble with the floating turbos “grabbing” onto the stone and leaving a gouge in the stone. Can you make a video or provide instruction on how to redress the turbos? I’m afraid mine are sharp on the edges and that’s what is causing this issue

@NSITools

3 жыл бұрын

I'm glad you like the kit. Yes - sharp edges on the turbos will definitely leave scratches. There should have been dressing instructions included with the kit but you can see them on our website here: nsisolutions.com/sl3-quick-change-system-resources/ The basics - just run the turbo on the back of rough granite or a cinder block and roll the grinder up to round the edge of the turbo. You will have to repeat this as the turbo wears down.

Man, I need these in the UK. Work provide me with some crap stuff, and a scratch that size on granite would take a good 4-5 hours minimum. Can you bring up really dark black granite with these products? We struggle with the really dark stuff!

@NSITools

3 жыл бұрын

Check the distributor page on our website " nsisolutions.com/distributors/ " we have two distributors in the U.K. or contact us at info@nsisolutions.com. Each stone is a little different but in general the kit works on dark TRUE granite. The stone called Absolute Black or Premium India Black is not a true granite and is a different problem. We are working on some additional techniques for Absolute Black or you could try the products and the techniques from our previous top polish video which tend to work better on that particular stone.

Nice mate have you tried donkey face polishing pads to speed process up? Have you got any advice on engineerind stone face polishing?

@NSITools

Жыл бұрын

Email us at info@nsisolutions.com and I can direct you to some help with engineered stone.

G'day mate, can you tell me what air and water line you use there please? Looks very flexible

@NSITools

11 ай бұрын

RED FLEXEEL HOSE, ¼” I.D. X 3/8” O.D. - great hose, comes in several colors.

What speed should the turbo pads be ran at? What speed should redeemer pads be ran at?

@NSITools

2 жыл бұрын

Here is a link to the written instructions: nsisolutions.com/wp-content/uploads/2020/04/Top-Polish-Kit-Granite-and-Quartzite-Rev-B-English.pdf For the Floating Turbos 600 RPM is a good place to start. That is setting 1 (the slowest setting) on the electric Makita polisher shown and is the speed Kris is using in the video. That will give you good control and create the least mess in a home. The turbos cut faster than you would expect so unless you are very experienced I would stay with the slow speed. With the Redeemer Resins the most important detail is - never let them run dry. You are seeing Kris use a center water feed polish at approximately 4000 RPM. This works in the shop where there is plenty of water and no concern for the mess. In a home I would stay with a lower speed on the electric polisher, approximately 600-900 RPM using a puddle of water from a bottle with a drop of dish soap in it to help keep everything wet. The best teacher for these techniques is to practice on scrap stone and you will quickly learn what works best.

@stevenrwh

2 жыл бұрын

@@NSITools We ordered the kit Friday from BBI. Our shop foreman can surface polish black granite back with regular pads and then switching to a buff pad. It is intense to watch though. The kit in this video seems much easier. We are excited to try it.

I have quartzite that is full of nicks can i do the entire coutertop?

@NSITools

11 ай бұрын

It is theoretically possible but you should look into filling the chips first. If the polish is still good you could fill the chips with epoxy, cyanoacrylate (superglue) or UV Resin (Filachip). The Filachip repairs can look very good and don't need any polishing after. There are so many variables that I always tell homeowners to consult a highly recommended pro in their area. As a side note - never use superglue accelerator on your stone.

Can I use this kit on Bluestone countertop top?

@NSITools

2 ай бұрын

Sorry for the delay. It's always quicker to email us at info@nsisolutions.com. I'm not too familiar with "bluestone". I believe it's similar to soapstone. If that is the case than do not use this kit. This kit is strictly for natural true granites and quartzites. Email us and I can tell you who to talk to.

Cuántos pads se le pasan y como se llama la pasta q aplicas al último

@NSITools

Жыл бұрын

The paste is called MB20 and is manufactured by MD Stone Professional. There is an unboxing video showing all the items that are included in the kit: kzread.info/dash/bejne/dYmgyNewmdizc7g.html

Could you do a video on removing scratches from a matte white Caesar stone or equivalent please

@NSITools

Жыл бұрын

Man made quartz? - not with this kit. Contact us at info@nsisolutions.com and I will tell you who to contact for some help with quartz

When can I order this kit from and price, in from barbados

@NSITools

2 жыл бұрын

The current MSRP can be seen here: nsisolutions.com/product/top-polish-kit-granite-quartzite/ contact us at info@nsisolutions.com and we can make arrangements to ship to Barbados.

Como puedo conseguir un kid como el q utilizas en el video?

Polishing machine is Makita 9237?

@NSITools

2 жыл бұрын

Yes - the Makita used in the video is a 9237 which works well. We do find that the older model 9227C will last longer.

where can I buy one of this?

@NSITools

3 жыл бұрын

You can find a list of our distributors on our web page here: nsisolutions.com/distributors/ If you email us at info@nsisolutions.com we can help point you in the right direction.

Where can I purchase this kit

@NSITools

2 жыл бұрын

You can purchase it from most of our distributors. They are all shown on our website here: nsisolutions.com/distributors/

Where can I buy this kit? It looks like your distributors no longer carry it....

@NSITools

3 жыл бұрын

They are still available. Email me at info@nsisolutions.com and I can let you know which distributors are actively purchasing them in the US.

@sergemorozov2933

3 жыл бұрын

@@NSITools emailed. thanks for the quick response.

@NSITools

3 жыл бұрын

@@sergemorozov2933 I responded to your email. Thanks for the inquiry.

Was this demonstration done in real time? Meaning did the repair take the amount of time shown in the video?

@NSITools

3 жыл бұрын

The actual repair would be quicker if we weren't filming and trying to explain the process. Kris (gentleman in the video) says 10 to 15 minutes total, for the repair shown, on a normal day in the shop.

@BuiltByDesignKy

3 жыл бұрын

@@NSITools Thank you for the prompt reply and information!

How much RPM is for this angle grinder?

@NSITools

2 жыл бұрын

It's a variable speed Makita Polisher that turns 600 to 3000 rpm with a dial type speed selection switch.

@stevenrwh

2 жыл бұрын

@@NSITools What should it be set to?

How to remove acid stain

@NSITools

Жыл бұрын

email us at info@nsisolutions.com and I can maybe point you in a helpful direction

Sharpie it and boom save your self 600 dollars and time 🤪 jk great educational video

@NSITools

3 жыл бұрын

Thanks

Can you come to my home to fix my countertop?

@NSITools

3 жыл бұрын

Check with your local stone fabrication supplier to see if they can recommend a counter refurb pro. Get references and check out their work before you hire them. If you contact us at info@nsisolutions.com we can give you a couple names to start with who may be able to point you in the right direction.

Muj machine lyna he

@SureshKumar-zw1cz

2 жыл бұрын

Connot nobar bejo

@NSITools

2 жыл бұрын

Not sure Google has translated this correctly for me but you can see the kit information on our website here: nsisolutions.com/top-polish-kit/ Retail cost in USD is shown here: nsisolutions.com/product/top-polish-kit-granite-quartzite/ We are a manufacturer and normally sell through distributors . If you are still interested contact us at info@nsisolutions.com

Please write step by step grids .lm not good speak English, Thanks

@NSITools

Жыл бұрын

Here is the basic instruction manual for this kit (in english): nsisolutions.com/top-polish-kit-resources/

A few hundred dollars for a professional Videographer would have made a huge difference and probably increased sales by 400%…..at a minimum out a fuzzy cover on your mic or buy a cheap DJI.

Como puedo conseguir un kid como el q utilizas en el video?

@NSITools

Жыл бұрын

It is available from several of the distributors shown on our web page here: nsisolutions.com/distributors/. If you email us at info@nsisolutions.com we can help locate a distributor that keep our kits in stock.