As a trainer for 15+ years, I give this video high marks

@forkliftjoe3620

11 ай бұрын

Thanks💯

@miroslavklaric5538

6 ай бұрын

​@@forkliftjoe3620 I wanna do the test so If you got any advice, thank you

The “carriage” is what attaches to the “mast” and the pallet should be against the “lower backrest” (aka, the “LBR”). As a guy that actually installs those parts on Hyster trucks for a living, I give your training a solid A+ and appreciate you providing the information to those that need and/or want it. You’re actually helping folks, so keep it up! 💯

@forkliftjoe3620

Жыл бұрын

Thanks Bro

@ProsperUdeagbala-qs8nu

10 ай бұрын

@@forkliftjoe3620 Joe please do a video where you are staking a pallet

@LifeOdysseyMotivation

4 ай бұрын

@@ProsperUdeagbala-qs8nu you mean, "stacking"?

Just found out what all I needed to do to pass my test in 2 days. This video just made me more confident in my knowledge. I've never tested for this, always hopped on, moved a load, then hop off. Now I see how important it is to know all the stuff you covered. This a valid ass video, thank you

@Pun4500

2 ай бұрын

Did you pass

Thank you for making this simple and easy. I start a forklift job soon. Never drove one before. Thanks to you I wont look as dumb. I appreciate you! 🙏

I'm experienced with a forklift but was never certified until today. And it was really simple 15 minutes not including my the written part which I did in early January. In a room roughly 20 ft x 20 ft, with a steel pole in the center, she made me do the check list, lights, mast, fire extinguisher, etc, etc, etc, then she made me get in, pick up a pallet, back around in a circle around that steel pole until I was in my starting position. Then she made me pick up the pallet again, back out and turn to place the same pallet on on upper level. She told the only way I could fail is if I damaged property, or people. Which I didn't. Certified. It's pretty easy actually. Forklifts are easy to operate. I used to need to load 4 of my own pallets onto a 1 ton cude truck inna warehouse, with minimal space between the back of the tuck and whatever was behind. 5 feet space, ouch ng the first to skids up towards the nose of the truck with 3 and 4 pallets. I had to learn. I remember getting into a heated yelling match with my manager about 15 years ago about that. I asked him if he could load my truck for me, he was good on the forklift. I was not certified. He told me to do it myself. I lost it on him. "F*** YOU! I AM NOT CERTIFIED TO USE THAT THING! I HAVE NEVER EVEN DRIVEN IT! WTF!?" I lost it on him in the warehouse in front of everyone and this is a big guy. He could pick me up and throw me through a wall I he wanted. He gets freaked out. I remember him recently, 2017, we got into it for her something he come over to me and grabbed a hold of me almost I'm a big to restrain me because he wasn't sure if I was gonna lose it on him. I think me exploding humbled him. I look crazy when I'm that angry spit flying out of my mouth, barking yelling, truely angry, not a show. I honestly believe it scary to him because he didn't know if I was going to lose it and attack him, I was already super stressed. It was a winter day, storming and I am going a long distance with a lot of stops. I lost it on him, he points towards the office where the boss resides and says "that's who you talk to about certification..." And his tone, I knew I humbled him because I was mad. I was p***ed, but I also had to show him up, so I learned to do it. Without certification. I hadn't driven one in 15 years until this newest place and it felt second nature to me.

Thanks man about to take my test after my lunch break and super nervous but I’ve been driving a lift for a while now but I really need this job pray for me family

I just started driving a lift for the first time ever back in June. I've gotten a lot better at it, but I'm still a beginner. My test was really bad. It was just pick up a pallet of parts, drive it about 50 feet in one direction, and then drive back and put it back down. And then I was certified. Even though their test was not thorough enough thankfully I'm a fast learner and I can drive it decently enough to where I won't cause any issues.

I’ve been watching your videos because I have a test today/ your videos really helped me out. Appreciate you

Thanks man I really appreciate it I have a forklift test tomorrow. I was glad I could come online and make sure I had a heads up things. Thank you much 👍🏿

Have a forklift test tomorrow at my community college, this really helps calm the nerves! Thanks man subbed and liked the video!

@slammysosa

10 ай бұрын

did u pass

I have been driving forklifts for over 15 years. I took a break from working to go back to college for a few years because of the pandemic, and so I became rusty and lost my confidence. These videos are phenomenal, and have really brought me back to my old self. Thanks buddy!

Thank for the teaching us how to do forklift I really learned a lot. May The Lord Jesus Christ who died for the forgiveness of our sins on cross was buried and resurrected from the dead the 3rd day be with you forever.

Yes thank you I appreciate it very very good instructions you did a great job easy to understand

Safety is the key thing to any job

@forkliftjoe3620

Жыл бұрын

I Agree my friend💯💯

@jimkontos4221

Жыл бұрын

I operate a slicing machine in a deli I cut cold cuts all day long I always go slow and take my time

@forkliftjoe3620

Жыл бұрын

@@jimkontos4221 Yes Sir if you recorded those would be perfect for ASMR videos

You're helping me thank you so much from the bottom of my❤❤🌹🌹🤗🥰

I’ve been certified since April 2023. I watched so many videos of forklift drivers it gave me a lot of confidence.

I’m thinking about getting my forklift license and just found ur channel and have learned a lot. Thank you for all the education u give and any advice ? U just earned a sub brother

@forkliftjoe3620

Жыл бұрын

Thanks @xxblazinbeatsxx4314 💯💯

Thanks Joe, we appreciate your work. Could you please make a video about the mandatory driver's clothing, and how to change the gas bottle. Thank you.❤

@forkliftjoe3620

Жыл бұрын

I did do tank video already and clothes depends on the warehouse

@marteyreuben5147

Жыл бұрын

Thank you Joe for the good work. I watched your videos, I was very confident the first time I drove a forklift.

Thank You From London 🇬🇧 I will keep this video on repeat🔁

Thank you god bless you I needed this for my certification tomorrow!

Great Video! I have my 1st lesson today, it's great help for reviewing what i've learnt!

@dennisddiamond854

4 ай бұрын

You mean learned? No such word as "learnt"

@Pennytung101

4 ай бұрын

@@dennisddiamond854 I hope you know how to use google "They are both past tense forms of the verb 'learn', and are used to indicate that someone has acquired knowledge or a skill through study or experience. However, learnt is the more common spelling in British English, while learned is more commonly used in American English"

Thanks for the videos man. Starting certification tomorrow.

Planing on going for a forklift course soon but watching videos to know much

Cheers bro. Really useful 🇬🇧🇬🇮

I'm trying to get my certification soon thanks a lot for the video man much appreciated stay safe bro

So glad I' have this behind me...

Start a forklift job Monday my boy thanks

Pick it up, and lifit down my guy!😂

@forkliftjoe3620

Жыл бұрын

Yes Sir💪🏾

Thankful you are verry informative.

Thanks man! Comment for the algorithm

@forkliftjoe3620

10 ай бұрын

Always! Glad I can help💯💯

I have my test today, thanks for these videos brother

Im taking my exam tomorrow, cant believe I found this video now. THANKS MAN

@forkliftjoe3620

Жыл бұрын

I have plenty more on forklifts bro

Thank you for your explain!!! I really appreciate it :))))

Thank you ! Thank you!!

Thanks for teaching. sr❤

Thanks very much bro, very informative!!!

That hoody is dope

"Appears overconfident" "Appears nervous" Brother, it's already got "seems irresponsible". They really padding the test, ain't they.

having forklift papers, I watched the entire video🤣,greetings from poland ✊

THANKS JOE MY TEST IS TOMORROW 👍

Man thank you so much for the great , detailed Forklift Video Sir - I am looking into becoming a certified Forklift Driver in 2024 and this video helps out immensely #PICKITUPLIFTITDOWN

Life saverrrrrrr🔥🔥🔥🔥

Thank you mate

Bro Joe, I wanted to if I should start checking the oil and water when going for taste? Thank you for your service

@forkliftjoe3620

Жыл бұрын

Real companies have certified mechanics from outside or inside company to perform that type of work.

Thanks for this video and me I want to apply this job

What’s up question. If the load is to big to see over so I have to drive backwards but in order to do so and exit I need to turn the forklift around but the area is to small to do so, do I lift the load till where I can see then turn it around and lower the load then continue to drive backwards? Or do I move forward with the load I can’t see over until there’s clear space on my sides and turn around? Seems unsafe so to me lifting it in the air, turning then dropping seems like the best option, am I right?

Thanks Joe, please how do you know the weight or load Forklift can lifted up ⬆️ are you going to lift the load up without checking the weight?

@forkliftjoe3620

Жыл бұрын

These lifts can pick up pretty much pick up about 3,000 pounds with weight directed on forks. I rarely lift anything that heavy so I don’t check weight

Thank u for this

Thanks bro.

U S E F U L!!!🔥🔥🔥👍👍

Do you keep the load tilted after you tilt it to get it off the rack ? And when you pick it up at a lower level are you obligated to tilt it ? And keep it tilt or do you un-tilt it after you Titled to pick it up after

On the theory test, do i write down what we answer I can remember of my head or is it multiple answer questions, where I am able to circle all the answers I think is right?

Thank you ❤

THANKYOU august school😂

What about the pre checks

So at my Job I am in training class for 2 weeks. I started today first time doing forklift. Can I get certified through my employer or I'll have to go to school to become certified???

@forkliftjoe3620

Жыл бұрын

Both but most likely Employer if they have a certified trainer.

@shaylanewlife

Жыл бұрын

@@forkliftjoe3620 Aww ok 😊

Hi joe. Must I tilt every parcel am about to pick up ?

@forkliftjoe3620

10 ай бұрын

Yes to stabilize

@ibeosinachi1158

10 ай бұрын

Ok Sir. Thanks. I'm greatful for the feedback .

Do you only tilt load back when travelling ?

@forkliftjoe3620

11 ай бұрын

U always wanna have load even but up off ground by 2 to 3 inch’s at least

If you’re moving a pallet of stuff off the high shelf are you allowed to get out and make sure you have enough clearance to lower it or does that make you fail?

@forkliftjoe3620

Жыл бұрын

You should be able to see from inside lift so short answer yes u can fail.

@forkliftjoe3620

Жыл бұрын

You should be able to see from inside lift so short answer yes u can fail.

@Forklift joe im interested in operating forklift but i have no experience what should my first step. I was told to take an online certification test if i pass i can apply and my training would be in that job is this correct and what website do visit thank you joe for this videos i been studying some questions asked in the exams i really want this job

@forkliftjoe3620

Жыл бұрын

Watch my other videos and start to apply immediately they will give u a lot of confidence

nicenice！

💰💰💰💰💰

I assume the test is for America.

Legit

Really appreciate your time in helping out with these videos 👏🏼🙌🏽🫰🏽💯

@forkliftjoe3620

7 ай бұрын

Thank you 🙏🏾

Thanks cuz