Finish the sentence guys...... "BLOOD FOR THE BLOOD GOD..........."

@jasonmolenaar119

3 жыл бұрын

Milk for the Khorne flakes!

@SprayBlackStudios

3 жыл бұрын

@@jasonmolenaar119 Not what I was looking for but I think I may even prefer this answer!

@willnox1

3 жыл бұрын

SKULLS FOR THE SKULL THRONE!!!

@shartsmcginty8056

Жыл бұрын

On a mountain of skulls in a castle of pain, I sat on a throne of blood! What was will be, what is will be no more! Now is the season of EVIL!

@analrightboah2464

Жыл бұрын

POV: world eater forgot the chant: “uhhhhh… AHHHHHHHHHHHHHHHHHHHH!!!!!!!”

BRILLIANT! All the tutorials I've seen so far have been using fresh blood and fancy brush techniques, but dried filthy blood blown on with a straw? That's TRULY realistic blood spatter! Thank you.

@SprayBlackStudios

2 жыл бұрын

You are welcome! I was never happy with the look of super fresh blood, had to find a more realistic way of doing it!

Great video. I got the Vallejo Special Effects Set. You get Flesh Blood and Dried Blood which are reasonable effective. You also get Vomit, Verdegris, Dry Rust, Rust, Rotten White and some Chipping Medium. All the ingredients for creating something pretty gory. Or a really bad cocktail.

@SprayBlackStudios

3 жыл бұрын

Sounds like some of the dirty pints I drunk in my early 20s! I have a handful of those separate but I hadn't seen that they did a set!

The straw method was really cool and worked great. With the smallest brush I had with an extremely small amount of paint I could use it on a mini and it looked awesome.

Filthy congealed blood. I would never think to mix together BFTBG and TC together. I will be giving this a go. The airbrush on a low pressure to get a splatter is a nice technique I have used myself on terrain. I watched Alex from 52 Miniatures mentioning using a drinking straw for a much more controlled and smaller splatter too. Excellent vid mate. Loved the “science with” section.

@SprayBlackStudios

3 жыл бұрын

Thanks bud! The Typhus corrosion can really make all the difference, especially when those bits of pigment clump together. When you get that it's just next level! I actually watched Alex's vid as I was researching thumbnail and title ideas for this video, some really good stuff in there!

Nice video dude. Very informative, it should help a lot of people out

@SprayBlackStudios

3 жыл бұрын

Thanks buddy, I really hope so!

I learnt so much today. Thank you Dr Rich. Lovely video too. ❤

@SprayBlackStudios

3 жыл бұрын

I like the sound of Dr Rich! You are welcome as always Spudicus! I look forward to seeing this on some Orks! I'm sure I could come up with a decent "Necron Oil Blood" effect for you if you want it?.....

I think you're the only person who has mentioned adding typhus corrosion to the blood paint and you are actually a genius for it. The extra bit of texture is *amazing* Good find, great vid !

Very helpful, thank you for making this video.

@SprayBlackStudios

2 жыл бұрын

You are very welcome!

Just fantastic!

Khorne approves your efforts!

@SprayBlackStudios

3 жыл бұрын

BLOOD FOR THE BLOOD GOD......... SKULLS FOR THE SKULL THRONE OF KHORNE!

Great video man this is pretty much what I’m going for thank you

I liked it so much I'm sharing the link to this video on my FB pages for my miniatures game I'm writing Verrotwood.

@SprayBlackStudios

3 жыл бұрын

Thanks for the share 👍

Vallejo: Smoke is also a good one for cutting the saturated red and having a gritty texture too. Worked really well with either a little red ink or Tamiya clear red and UHU glue for some nasty caked on gore :D Awesome video bud ;)

@SprayBlackStudios

3 жыл бұрын

Thanks bud! I shall definitely have a look at that! I do use a lot of Vallejo but not tried that one yet!

The moment when a door painting tutorial convinces you to subscribe

@SprayBlackStudios

3 жыл бұрын

Haha glad to have you onboard! I mean, not many people produce good door painting tutorials.....

Best blood effect I've seen yet. Nice one, m8

love it

Great video, now I have to check all the rest (also, love your motto)

Such a great and helpful tutorial, thank you :)

@SprayBlackStudios

3 жыл бұрын

You are welcome!

Great vid - thank you! Did some splatter for the first time recently and my first models are a bit... overboard! Really love that airbrush technique.

@SprayBlackStudios

2 жыл бұрын

Blood splatter is definitely a technique that takes some practice! It's very easy to go overboard.

Nice technique, and exactly what I've been looking for! Nice use of the pringle can lid btw, never thought of doing that..

@SprayBlackStudios

3 жыл бұрын

Glad I could help! The pringles lid is suprisingly useful for things like this! If you eat a lot of pringles like me then you tend to have a fair few laying around too!

Great tip! I'll definitely be doing this on the future.

@SprayBlackStudios

3 жыл бұрын

Thankyou!

Great video, typhus corrosion with blood for the blood God, great tip. Thanks. 😃👍🏼

@SprayBlackStudios

3 жыл бұрын

You are welcome bud! 👍

The crusty dried puddle looks excellent!

@SprayBlackStudios

3 жыл бұрын

Thankyou!

nice tutorial, i love the idea of using the airbrush to made blood splatt

really helpful video! Thanks for making this, I'm gonna use some of these techniques on my cosplay crafting!

@SprayBlackStudios

2 жыл бұрын

Ooooh enjoy! I hope this techniques work for you!

@nukaghoula

2 жыл бұрын

@@SprayBlackStudios it did!! My little sister dress is perfect now, thanks again you rule!

Thank you , Ritch . ~ GrimDark Rules ~

@SprayBlackStudios

3 жыл бұрын

Thanks Lou! And yes, it's all about the Grimdark!

Once again i run into you. You olayed a huge role in how my blood angels look and feel today. This will do nicely on their close combat units

Really great video, my brother! Great idea with the Typhus Corrosion! It really does add that sense of coagulation to the blood! ~ Wolfbrother Methos

@SprayBlackStudios

3 жыл бұрын

Thanks buddy! The Typhus just nudges it up a level!

Nice video dude! Will use this method

@SprayBlackStudios

3 жыл бұрын

Thanks bud!

Great video mate. A big tip I always give is to add a bit of brown to the blood splatter and it always makes the difference. Bit this is another level mate! Stealing this for our challenge 😜

@TheHobbyCorner

3 жыл бұрын

Also, the sticker "Science! With..." Haha love it

@SprayBlackStudios

3 жыл бұрын

Haha please feel free to steal! I am expecting big things from you for our challenge!! Also, the "Science with Sprayblack" may make future appearances.....

@TheHobbyCorner

3 жыл бұрын

@@SprayBlackStudios ha no pressure then!

*World Eaters intensify

@SprayBlackStudios

3 жыл бұрын

I'm gonna be honest, making this video did put some thoughts in my head.....

@jostonpowell1346

3 жыл бұрын

@@SprayBlackStudios I'm sure it did lol

@jherazob

3 жыл бұрын

@@SprayBlackStudios Please report to your nearest Commissar immediately

@SprayBlackStudios

3 жыл бұрын

@@jherazob Sir, yes sir!

awesome tutorial, now to find a good excuse to use this technique :)

@SprayBlackStudios

3 жыл бұрын

When you collect Orks that is the excuse!

GreenStuffWorld have two nice Blood and their Vomit is the best too,cool video !

@SprayBlackStudios

3 жыл бұрын

Thanks! I've been meaning to try the vomit for a while tbh!

Nice video bud, super helpful!

@SprayBlackStudios

3 жыл бұрын

Thanks bud!

i love gore and since i just printed a pyramid head figure i wanted lots of blood, ill retry and keep practicing, thx

I honestly just wanted to watch this so I could draw danganronpa blood on my mini crime scene for class but I stuck around cause it looked cool and I liked this mans accent-

@SprayBlackStudios

3 жыл бұрын

I'm glad you liked the video! And my accent....

Fanfuckingtactic. Great work!

@SprayBlackStudios

3 жыл бұрын

Thankyou!

Grim dark World eaters pleaaaaaaaaaaaaaaaaaase!!!!!!!!!!!!!!!!!!!!!!! Very good channel! Congrats!

@SprayBlackStudios

3 жыл бұрын

Thankyou! Grimdark World Eaters will definitely be happening when I have the right bits!

@pauamat636

3 жыл бұрын

@@SprayBlackStudios Man I can't wait! I've recommended your channel to all my friends as a very easy step by step grimdark videos to follow. Keep it up!

try GreenStuffworld´s " Coagulated Blood"

that sister of battle armor white tone is fantastic and truly grim dark. How did you achive it? thanks for the great work!

@SprayBlackStudios

3 жыл бұрын

Thankyou! The armour tone for the sister of battle was achieved using the same technique as I used for my Grimdark White Scar that I did a tutorial on. It's essentially white ink, Oil Washes and then some Streaking Grime to tint and weather it.

I know this video was uploaded some 11 months ago. But does anyone know if a dark brown + deep red mix could give a similar effect? Or what to get that isn’t citadel to get equivalents of Blood for the Blood God and Typhus Corrosion? I really don’t like citadel pots, and my autism sometimes makes it difficult to visualize what mixes would make good substitutes.

@SprayBlackStudios

2 жыл бұрын

A dark brown and deep red mix could get a close enough colour but without the properties of those paints wouldn't neccessarily get the same finish. A few companies do similar products, the one I would probably recommend is the Greenstuff world coagulated blood. It's a very similar product and comes in a dropper bottle!

Is there any way of achieving this effect without Typhus Corrosion, I am currently painting a pyramid head model and need this effect, would something like Stirland Battlemire work?

@SprayBlackStudios

2 жыл бұрын

Stirland battlemire is probably a little bit thick sadly, it could work if it has been thinned considerably but the particles in it are pretty big. The colour can be matched relatively easily using various browns but the key of the Typhus corrosion is the small particles within that provide that clumping effect.

My rationale is that all my blood splatter is always fresh, so the browning doesn't really have chance to take a hold yet. Great stuff though, I'm definitely going to be giving this a try at some point.

@SprayBlackStudios

3 жыл бұрын

Well, if you are a Khorne follower then chances are that it probably is fresh!

Great video. Would really love to know how you painted the Grimdark Sisters of Battle?

@SprayBlackStudios

3 жыл бұрын

Thankyou! The white was done using essentially the same method as I used in my Grimdark White Scar video but I have had a few people asking so when I next do a unit I will get the camera out!

@thecalvatron1955

3 жыл бұрын

@@SprayBlackStudios thanks. Did you use the streaking grime at the end too? Got some Sisters and an airbrush coming later this week 🙌

@SprayBlackStudios

3 жыл бұрын

@@thecalvatron1955 yeah I used the same method, finishing with the standard Streaking grime 👍

@thecalvatron1955

3 жыл бұрын

@@SprayBlackStudios thanks. One more thing, sorry! I've got my Seraphim squad now, I've built them but wasn't sure what to do about their flying stands? Should I glue them to them, then prime and paint them? Or should I paint them separately, and if so, how would I go about doing that as they don't have flat feet to glue to bases? 😵 sorry to keep bothering you!

@SprayBlackStudios

3 жыл бұрын

@@thecalvatron1955 no worries buddy! If you take a look at my instagram there is a photo of a Zephyrim prior to the streaking grime being added. What I do is to drill a small hole into the bottom of the jump pack where the base sits and then to insert a long pin and paint the mini whilst on a cork. To fit the base I'll then remove the pin and replace it with a shorter one that's been set into a drilled hole at the top of the flight stand stem. Hope that helps!

what's the brand of the paint you use? yay I finally know how to paint realistic looking blood

@SprayBlackStudios

2 жыл бұрын

I use a big range of paints for my work to be honest, mainly Citadel, Vallejo, Ak Interactive and Scale 75. For this the blood effects were all citadel 👍

@littlenyx7022

2 жыл бұрын

@@SprayBlackStudios thanks

Spatter

I am sure you will think I am crazy but I used my blood for blood effects. 😁😁

@SprayBlackStudios

3 жыл бұрын

Yes, you are definitely crazy! 😂

@pablocamargo8744

3 жыл бұрын

@@SprayBlackStudios 😁😩

just use your own blood!

@SprayBlackStudios

2 жыл бұрын

Wouldn't be a first!