Write the cabinet number in the socket on the door where the hinge mounts - no tape needed and the hinge will cover it up when finished. That's all I got.

@Tim.1113

3 жыл бұрын

I label them there also with a sharpie. I cover it up with tape so if you spray them you can remove the tape and there you go.

@8andsk835

3 жыл бұрын

Champion move.

It's better to paint the back sides of doors first, because you will be setting this side down while painting the front. You want the front to have never touched a painters point or be set on something. If a scuff happens on the back, touch it up after the door is put back

@giovannacannizzaro2302

4 жыл бұрын

@Kidneedonor...Very good tip!

@3pumpkins170

4 жыл бұрын

Kidneedonor That's what I thought, too!

@jeanniej8296

4 жыл бұрын

How do you get the hardware on after painting if you shouldn't lay it on its front side?

@kidneedonor8088

4 жыл бұрын

@@jeanniej8296 Just meaning you shouldn't lay the front side on painters points. Paint the back side first and let it thoroughly dry, Then turn over and paint the front side and let this too dry completely. Now put the door front side down on a towel or blanket to install hardware. Install the door and touch up the back side if any damage has occurred from resting on painters points.

@brandindash1863

4 жыл бұрын

Agreed that’s what I do. I paint the backs first and then I replace the hinges then I do the front.

I painted my cabinets last summer and didn't do any stripping first. But I did use Zinsser B-I-N shellac-based primer first. That stuff is absolutely incredible. It sticks to anything, and paint sticks to it so well. When it comes to painting old wood (we painted over all of our old trim and molding as well), it's the only product I use now.

@sasha185

3 жыл бұрын

We also used a bonding primer. It worked great.

@barrywolf2145

2 жыл бұрын

you can also use a water based primer like STIX works just fine imo. then follow with benjamin more advance paint.

@JamesJamesOG

Жыл бұрын

How has it held up?

@amdistant5547

Жыл бұрын

Thanks for the tip.

@nayefalkurahi3357

Жыл бұрын

so u didnt sand ? That thick slick layer of polyurethane wont let anything stick to it.. I learned the hard way 😑😑..

TIP: always mark the hinges too so they go back in the same spot they were removed from so future adjustments will be minimal. They were originally adjusted to make the doors line up and some hinges in one location, may be adjusted too much for another location, so you don't want to mix them up. It's best to put them back in the same spot you removed them from. Example: Remove door # 1. Then remove the hinge and with a colored marker, write 1T inside the top hinge hole and the same to the back of the hinge. Then mark 1B in the bottom hinge hole and the same to the back of that hinge. Then cover those numbers with painters tape so it doesn't get painted over. Happy painting.

Thank you! This old widowed lady sure does appreciate this , thought for sure I was going to have to sand! I am so stoked now I get to have an updated kitchen before the holidays! 👍🏼

@lotofbitsabout

5 ай бұрын

Hi Lora, wondering how they held up before I imbark on this journey! I'm still deciding which to do, paint of poly stain over the existing golden oak

Always clean the cabinet door fronts & backs and faces of cabinets with a cleaner/degreaser like "TSP-PF" (Phosphate Free). After cleaning and drying there are deglossers you can use that actually rough up the surface of the clear coat without actually taking it off completely so that the bonding primer will stick and bond to it. No wiping off either. Just apply with a lint free rag in circular motions over the entire surface really good and that's it. No wiping off. And I never use a brush to paint cabinets. I use a small foam roller. It gives it a nice tiny textured finish that looks awesome and never leaves brush marks. 1 coat of bonding primer and 2 coats of high quality paint designed for cabinets/trim/doors. I prefer Sherwin Williams or Benjamin Moore paints.

@suew5659

5 жыл бұрын

Chris Handy o

@cmil9802

5 жыл бұрын

What about the gloss step? Is it unnecessary?

@Glaucidium810

5 жыл бұрын

What brand of deglosser do you use?

@johnbelvin5216

4 жыл бұрын

Parks is a good brand of deglosser, thing about deglosser, if you have any kind of "trash"or grit from any previously applied coatings, deglossers don't really remove them, gotta sand.

I did my cabinets without stripping. I just left my clothes on.

@drleo2641

4 жыл бұрын

You so silly

@wadebarnett2542

4 жыл бұрын

Take a bow, sir!

@james8156

3 жыл бұрын

😂👍🏻

@mindakahn9964

3 жыл бұрын

Smile 😊

@mary11976

3 жыл бұрын

😄😜😂

Great tips on the deglossing process and loved that numbering of those cups to keep the hardware from being mixed up everywhere. Thanks for the advice and help.

I’m gonna start this project tomorrow, so thank you for this video. I took the liberty to write your material list for your viewers but I still advise those who are gonna do this task to rewatch the video in case I missed anything. Or maybe you (the channel) can add to whatever I missed. Step 1. Buy materials (scouring pad, liquid de-glosser, painters scraper (optional), gloves, rags, small cups to fit each cabinet’s hardware (optional), small bucket for water (optional), bond coat, paint stands (small stands to keep cabinets off the drying cloth/material), protective top coat/poly urethane, masking tape, small paint bucket, new bumpers for the cabinets). Since this is going to be a spouse team project I’m gonna double up on some of the items on the list i.e. small bucket for the paint and an extra brush. Good luck fellow quarantine diy’ers! P.S. I understood what you meant to say was “how to repaint the kitchen cabinets without sanding.” I gotcha!

@leovigil8990

4 жыл бұрын

Jay Tea good to see that I'm not the only one doing some research for some quarantine home projects. Thanks for writing out the materials list came in handy! Good luck, cover up and stay safe!

@Jaytea671

4 жыл бұрын

Leo Vigil thanks Leo! Hope your project went or is going well. Stay safe too. As for me, what was supposed to be just kitchen cabinets turned into de-glossing all the doors 🚪 and built in closets in the house. It’s also didn’t turn out to be a spouse project 😔. Oh well.

it took me 7 days to get mind painted,,it took a little bit longer for mind because i put three coats on my cabinets,,i took it slow because i wished to do a good job. and i didn't want my kitchen all messed up forever. i used the paint with the primer in it already,,i just love the way it turned out,,,happy to share this information.jimmy of Indiana

It is amazing to me how popular the white kitchen cabinets have become. Seems like the only thing people are wanting now.

To mark the parts a better method would be to get a set of strike dies with numbers (letters too). Then strike a number on the back of each door, and then on the frame. If you put both near the bottom hinge then they'll be out of the way, but oriented correctly. If your paint is going on thickly, and you want to hold back over the numbers, it won't be in a place that would be noticeable. I've done almost everything I see in the This Old House videos, but I always learn something new, and it's always great to see it done well.

I really love these painting videos. It really is a pastime. Whoa!

Thanks for the video. Currently in the process of removing all the doors and drawers (and emptying everything). The previous owners seemingly never cleaned so I've got lots of work to do before I even de-gloss...

I wish I could refinish our kitchen cabinets in 6 minutes too...

finish the updated look...walls and countertops too!! Looking at my 1980's kitchen I see potential! I am almost inspired to give it a shot!!

@wilburwittemann3192

3 жыл бұрын

9999999999999999999999

Ok, I can do this, ive been wanting to redo my kitchen. Thanks very helpful

@dnsmithnc

4 жыл бұрын

You need to look at other videos. I wouldn't use a brush first off and secondly, they make it look far easier than what it is.

Since people are scared of terms like stripping and sanding Rustoleum changed the terminology, the deglosser is really a finish remover aka stripper. The scouring is really removing the finish , the bond coat is a high adhesion primer paint combination. And the top coat is just good old varnish

@marlenetoneguzzi939

6 жыл бұрын

Thanks for this clarification. I was actually researching deglossing and you were the only source with clear explanation.

@deweyfosworth7833

4 жыл бұрын

And aioli is really mayonnaise

@boashna

4 жыл бұрын

more crazy English words peace maker is a nuclear bomb. craft beer mean it cost more ,Artisan means it cost more , calamari means squid ,whole food means whole paycheck.

@Lorinidaho

2 жыл бұрын

So true. I used this kit in my kitchen & worked so hard at the deglossing process that I wondered why I wasnt just using my electric sander. He didnt mention the big gap where the frame around the flat panel of the doors meet. You dont see it when its oak but very obvious when you paint it. I used caulking, so it looks like a solid piece.

the sides of my cabinets have that vinyl wood print contact paper. Can I paint that and how will it wear over time? Also why didn't you paint the interior of the cabinets? with the interior still the old finish, it looks like an in complete job. If I decide to paint the interior, will there be wear issues? I'm trying to understand what issues I would have that would result in the cabinets not wearing well with the new paint job

Can you put a glaze over the paint before you put the seal on? I know that usually when you glaze something you use a eggshell paint. What type of paint is this? Thank you for your time.

love these DIY Vidoes!

Hi Kevin, my oak kitchen cabinets have been stained but I would now like to paint them white, can I just sand them, or do they have to be stripped first? Or can I use the deglosser kit?

I like the idea of hanging the cabinets up with coat hangers that way you can paint both sides without any danger of scuff marks if you use a spray gun. I also seen really nice paint jobs with rollers instead of brushes. Why not also add soft close hinges? I mean it's 'This Old House' right. That would really upgrade those cabinets after a nice paint job.

WOW! Great job!

That’s great! That’s great! That’s great! That’s great!

this. does. not. seem. scripted. at. all. thank. you. very. much. for . you. work. looks. so. good. *smiles*

'Well I hope you keep a clean kitchen, you got a million people watching'😂😂😂 no pressure homeowner😂😂

Thank you!!❤️👍

Question....I have stained cherry mahogany and want to paint the cabinets an antique white. Can I still do it this way?

Using the Scotchbright wet is just wet sanding! Great trick. I use it frequently. Depending on the wood surface and what paint was down before, you can actually use Scotchbright to apply a thinned out first coat of paint. Makes it stick really well.

My thoughts were to use the deglosser on my cabinets and doors and then prime them with automotive 2K primer and then spray them with DuPont Imron, which is a polyurethane enamel. I want the finish to be durable and I don’t want brush strokes.

Great video, thank you. Will this process allow the grain of the oak wood to come through. If I was to use a wood stain color instead of white will the grain still show like original natural polyurethane coat.

@maxkady9478

4 жыл бұрын

A gm you can never completely cover oak grained cabinets. That’s the problem with painting over oak. On a small kitchen like that, better off buying new maple cabinets painted from supplier. It’ll have an auto like finish to it.

No, on edges and fronts use a small cabinet roller. You can better control your application of paint virtually ensuring no wrap around of paint or drips to the back side. Vert handy for the door box and the edges of doors. You can even do that for the front and back and get fairly consistent results with the texture a cabinet roller leaves. However, whenever I look at doors painted by brush or Cabinet roller it is pretty obvious especially the brush. For me, I prefer to just just spray it. It's faster even with the preparation and clean up of the sprayer. You can use an airless sprayer or HVLP. For a professional job, it's worth the investment especially in a kitchen. Good preparation is the key here. The actual spray painting doesn't take that long. Don't worry about making a mistake. Wait until it dries, sand off the mistake and do it again. However, good preparation, reviewing some videos here on youtube on spray painting cabinets and you will have professional looking results.

Great color

Nice job 👍 Water base alkyd paints are perfect for cabinets. Great bond , hardness and durability.

@martinhanley9524

3 жыл бұрын

What product or company would you recommend

After watching this video, I've learned that my kitchen cabinets look just fine the way they are.

@dnsmithnc

4 жыл бұрын

And they made the process look WAY easier than what it is. Plus, painting cabinets with a brush. They have small diameter foam rollers made for this kind of thing that create a much smoother finish.

Does it matter if the cabinets are laminate wood vs hardwood?

I use Java Gel Stain espresso, without removing the cabinet doors, just be careful around the hinges and clean up afterward.

Can you paint cabinets from a medium brown to an espresso brown? Are there any other pointers? What is the kits name/brand?

What color would you use on your kitchen cabinet kick plate on cabinets painted blue

If your gonna paint the cabinets, no need to strip paint/stain unless old paint is in rough shape,chipped. just sand to get smooth and provide grip for paint, dust with old paint brush, then tack rag, then apply good quality primer/sealer, then apply top coat(s) And never use cheap brushes, get a high quality brush, well worth it, and use a high quality paint.And do the face sides last.

I love it. I would like to paint over my kitchen backsplash too. Help

If you painted over oak, would the grain be visible? Any tips to cover or fill them effortlessly?

Please tell us what you used for the BOND coat.

They left out the most important part... what type of paint is it? What is that urethane coating??

You guys did a really nice job but now the white appliances stick out like a sore thumb. Any plans for those?

Can I do this over painted cabinets...to change color.... white to a grey? Or...still undecided...

This is the best way to re finish your cabinets. Call these guys to video it for TV so they do it for you. Genius!

excellent

What is the easiest way to hang a pegboard on the back of a bedroom door? 😊 😊 😊 THANK YOU VERY MUCH FOR ALL YOUR HELP! 😃 😃 😃

I just painted my China cabinet and it's been a week and it's still tacky, I put baby powder to help for now but that's only temporary any advice??

I would like to know exactly what primer specifically you are using. Thanks

Who do you recommend to paint cabinets if we can’t do it ? I need help

Great!

I think the home centers now sell a preparation that sort of "curdles" the old finish to give the paint something to grip.

I am in the uk what is the equivalent product here, havnt heard of a de glosser, anyone know?? is it just wood stripper??

How do you do this without any brush lines? My husband painted our laundry room cabinets on a test run for the kitchen. He sanded and primed multiple times and used self leveling, "no brush line" paint and there are still lines. We assume the only way to get truly smooth is with spraying?

I use a mini roller on doors...so much faster than a brush and smoother finish.

Does this method work on trim as well?

Clean them really well with TSP Spray with SW extreme bond primer Spray with SW Pro Classic

Love it

cool!

Great job! If you ever need a house to work on for your show, you can use mine! :)

Will this process work on cabinets that are already painted? I'd like to re-paint them with a different color.

@esmeraldagreen1992

7 жыл бұрын

Allison Haan depends on the color of yor cabinets if you are going light to light it should be relatively easy if you are going dark to light I would stop and sand the living daylights out of those cabinets then I would use a heavy duty stain blocking high adhesion primer and then would paint at least 3 coats sanding in between.

@alliskins5

7 жыл бұрын

Thanks!

@johnbelvin5216

4 жыл бұрын

Just don't apply latex paint over oil product, won't stick well. To test,get a small can of latex paint remover, like "goof off"... put some on rag and rub it on in an inconspicuous place, if paint comes off on rag, it's latex, if it doesn't come off, it's oil.

Kevin working without Tommy Oh boy!!!

Would this remove a painted finish?

Rags often have fabric softener on them use paper towels for final wipe down.

@johnbelvin5216

4 жыл бұрын

Or better, use a tack rag

So to avoid stripping all you have to do is strip the wood. Genius!

The single most important step in kitchen cabinet refinishing is TSP cleaning. Most can be cleaned with tsp liquid substitute, but for heavy grease and oils, (above and adjacent to stovetop), powder Trisodium Phosphate (true TSP) is better. Typical cabinet finish kits sold in the box stores are pretty crappy. If you could stand in this kitchen and get up close to these cabinets, let alone run your hand over the surface, I guarantee you wouldn’t be impressed. That said, you get what you pay for. A professional cabinet refinisher who knows his trade could give show-room quality finish, but at a price. What some people fail to realize is your cabinetry is the most costly item in your kitchen. If you are going to paint by hand then you are better off cleaning, sanding, using an easy to apply, excellent sand-ability, high adhesion primer, 2 coats. Then the same with the finish coats. The more coats you have to apply via brush and/or roll, the more brush marks/roller stipple you will have. Just trying to save some disappointment.

What brand of deglosser was used?

Benjamin Moore products can get this entire project done in two days, WITHOUT de-glossing or a "Protective" top coat. Use Stix, a bond coat primer, for your first coat, and the Advance WB product for your top coat, with no need to apply a clear coat. both products cost about $50 each, and a gallon does about 400 square feet, more than enough for a kitchen this size. I've had customers start this project on a Saturday morning, and have the doors back on by Sunday night.

@SandmanUT

7 жыл бұрын

Brian Broughman, what about caulking and putty? Is sanding required after the bond coat primer?

@OSUJedi2022

7 жыл бұрын

When ever needing to fill areas, use products that are waterborne, or acrylic. Plain painter's caulk is the best thing, or a waterborne wood filler. There is NO sanding needed after the bond coat. That's the beautiful thing about it, just apply, let dry overnight, top coat the next day.

@rwilley53

7 жыл бұрын

Brian...where do you get the Advance WB product? Just so I understand, you did no sanding at all...simply apply the Stix then the top coat?

@OSUJedi2022

7 жыл бұрын

The Advance products, along with the Stix primer, can be purchased anywhere they sell Benjamin Moore products. And that is correct, NO sanding at all.

@rwilley53

7 жыл бұрын

Is there anything special about the Advance WB paint? Is is just a latex interior paint or is is specific for this application?

It looked more modern with the natural wood and silver knobs.

5:00 Those fumes are starting to get to him!

@furiousmojo1

4 жыл бұрын

Austin Bryant lol

@Muffin192213

4 жыл бұрын

LOL!

I did a lot of research before I did mine! and I used small roller! it looks like a pro did them!but I am very handy! its the way I grew up!

@warrensmith1005

5 жыл бұрын

So Linda after all of your research did you use this brand featured in the video? Or did you do with another product? I love the fact that you can avoid sanding with this product.

Can you do this with stained cabinets?

I have laminate kitchen cabinets. Can I paint the laminate (formica on the particle board)?.

@baq8680

4 жыл бұрын

Formica is not meant to be painted as far as I know... but you could try starting with a small sample piece using an oil based primer.

The triangles at 4:58 look really nifty

I love how several weeks of work is condensed into 7 minutes.

@sislertx

7 жыл бұрын

Steven R 90 percent of the people who watch this and start will never complete it and when they do they will hate how this looks .. all thr paint brush strokes will show...thry probably got gloss paint making it worse. ..or thr wrong type of paint.

@kittkatt032

7 жыл бұрын

Steven R More like a week. Thats a small kitchen. Would you wanna watch 7 wks worth of videos...even if that was the case???

@paulaguido2099

6 жыл бұрын

Steven Reichert I

@johnsmith-qe2fd

5 жыл бұрын

Doesn’t take 7 weeks to paint cabinets

@dnsmithnc

4 жыл бұрын

@@kittkatt032 They should make it clear that the process takes awhile.

Doing this during quarintine 2020

Rich looking.

What is the product you have used?

How would you paint over veneer?

Anyone know what cabinet kit they used (brand)?

any body knows why All things being the same my oil base sometimes take 2 days to dry and another time few hours. what can I add to speed up drying .

@fairamir1

4 жыл бұрын

NEVER use oil base paint for cabinets

@saratemp790

3 жыл бұрын

@@fairamir1 Why not?

This looks like a great place for a Bukkake party.

Couple things... You took the tape off to paint the doors. Where did the tape go and how did you keep track of the doors once it was off? Also, while the doors were drying where did you put them? On the floor? Did you line them up against a wall? Finally why is that guy talking about his bunghole? Thanks :)

@brocksteinbrook3436

6 жыл бұрын

hey clay

@jacksonpuckett6115

4 жыл бұрын

@4:58 you can see they remove the tape and set it aside. Probably shove it up their assholes once done painting that specific door. The doors were drying right there on that table that you see. This video was shot over several years. Not 6 minutes like some people think.

What brand paint did you ise

Will this process work on builders grade laminate cabinets? Jeanne

@sislertx

7 жыл бұрын

cametientaucoeur actually go get some zinzer primer...sand lightly go over with a tack cloth...and prime and it will hold up just as well...it's still not like buying new painted cabnets but it will look just as good as these. also use oil based paint in a kitchen

@alangelman986

7 жыл бұрын

Oil base paint will yellow in time, especially white. and messy

@frankhorvath886

6 жыл бұрын

JeanneMarie68 im

What if the cabinets have previously been painted ? Can I just paint over the paint ?

@paulsallee4889

4 жыл бұрын

Lightly scuff it up, and yes. Paint over paint.

how hard is it to remove the paint at a later date??

@bryanwilson8396

4 жыл бұрын

Taras Kulakov Not hard at all … 1 match and some gasoline!

What kit did you use?

What kind of paint and where to get

Tip. Never put water based paint on top of a previously used oil based product without a primer, preferably oil based as well. Unless you like to easily scrape it off.

@LadyUnderhill

Жыл бұрын

The previous owner of our house did that. 🙃 What's better for removing that peeling layer - sandpaper or deglosser?

@headpainter1

Жыл бұрын

@@LadyUnderhill nothing is going to be easy. Maybe easier to sell your house and buy another one. LOL... we have used putty knife to scrape the complete layer of latex off. Then sandpaper. If I had to do it again I would probably use a chemical stripper. But you have to be careful with those. Citristrip may work better. It will dissolve the latex faster than the oil underneath it. Just time it right.

@LadyUnderhill

Жыл бұрын

@@headpainter1 Hah! I'd rather scrape off paint than move again. 😂 Thanks for the tip!

I painted my bathroom cabinets and they are still sticky after two months. What did I do wrong?

wow very nice Kevin good job

Two tips when painting cabinets. 1 use a spray gun always and 2 before you dry Build a dry racks. This is tone by taking scrap ply wood pit screws or nails trough it making sure they are on the same height so when you lay down its straight and level. Lay down your material in the nail then spray back side first flip while its wet the spray the front and let it dry.

@barrywolf2145

2 жыл бұрын

you can use a foam roller and get results as good as spraying, especially for novices

What kind of paint do u use??

@Amberly9143

5 жыл бұрын

Rustoleum cabinet kit I'm pretty sure.

No need to prime after deglossing?

We r moving into a house that has painted kitchen cabinets that r PURPLE. how do I go about repainting them white or a light grey? Do I need to strip paint? Sand? After I paint do I need to add a top coat? PLEASE help I have no idea how to do this

@baq8680

4 жыл бұрын

Your best bet is to do a light sanding of the cabinets and doors and then use a good quality oil based primer to start. After that a good quality paint of your choice of color... it may take up to 3 coats to hide that purple finish though.

@buggsy5

3 жыл бұрын

@@baq8680 Better would be to buy new doors.

"In a kit" never shows labels. Look like rustoleum kit. Haha. Such geniuses

@johnjacob688

6 жыл бұрын

They probably weren't given the rights to show the brand.

@kentullis25

4 жыл бұрын

@@johnjacob688 The paint manufacturer wouldn't pay Ask TOH a "product placement fee" so the show hid their labels. Every time you see an Apple computer or can of Coke on a TV show know that the manufacturer paid a fee to have their label plainly shown.

@johnjacob688

4 жыл бұрын

@@kentullis25 That's what I said in less words.