Have my videos have helped you? why not support the channel in some way You can make a one off/ monthy donation here in only one click: www.buymeacoffee.com/MyRetroWatches If you would like to purchase any tools & equipment then please see my Amazon affiliate & eBay (I do earn a small commission from any sales.) Thank you. Link: Link: myretrowatches.co.uk/tool-sale-links/ If you would like to buy any of my T-Shirts then please look here: teespring.com/stores/my-retro-watches

@freefreepalestine360

2 жыл бұрын

How much would you charge for the making of antikythera mechanism?

@ahmadhafeez9814

10 ай бұрын

How you removed the bezel

The well known magic thumb method. Nice.

Those numbers came out lovely. I'm surprised the finger/thumb rub worked so well. Excellent video as always Mike :-)

@MyRetroWatches

4 жыл бұрын

Thanks Vince. Me too, I found out by accident really...

Next a bezel painting with lume!

Nice work Michael. I've used that technique on the decorative incising/engraving on Ansonia enamel clocks (made from cast metal) cases. It works fairly well. I would remove the "over paint" with a silky type rag, i.e., one with a very small nap, after the paint had set for a while (hour). Any stubborn paint remaining could easily be removed with the same cloth dampened "ever so slightly" with acetone. I used this technique on the incising on golf irons, also, to make them look like new.

Thank you for the video - great technique and results. Stay safe and thanks for the entertainment in these troubling times.

Very nice! You made what looked like a complex job very easy to do😊

Welcome back Mike, we've missed you. One of the very few good points about this lockdown is more time for watches!!

@MyRetroWatches

4 жыл бұрын

Zay Gezunt thanks for your patience .. never like leaving it too long between videos but sometimes life just gets in the way of the hobby.

I greatly enjoy watching your videos. You have taught me a lot. Thanks from Canada.

@MyRetroWatches

4 жыл бұрын

Terry Van thank you so much

Nice! And welcome back and safe

Thank you. I used Testers enamel flat white and it worked quite well.

Thanks Mike, would have left the lume part black myself. Great tips.

It would be very interesting if you tried mixing the luminous powder that BigClive has been fooling with in to the enamel paint or opaque resin for a intense glow on the numbers. Cheers for your ability to edit music to match the volume level of your voice. Such a rare treat.

Good job pal, much appreciated

Awsome. No tip but excited to see the hole video of that watch!

wow i did this on my casio duro and its turned out awesome

Great job. The numbers looked like new.

This video was supremely helpful. Watched a couple others that had terrible technique and messed up a few times before starting over this way. My bezel looks great. Letting first two coats dry for a day before giving it a final coat.

@MyRetroWatches

3 жыл бұрын

Happy to hear this video is helping people. thanks for watching and leaving a comment.

@mokumerxxx435

10 ай бұрын

Hello friend, Did you paint your bezel numbers two times? If yes, then what: after 24 hours cleaning with alcohol and repainting second time ?

@TheRyang39

10 ай бұрын

@@mokumerxxx435 I didn’t need alcohol - I globbed paint on channels, let dry for day, painted again, let dry, then removed excess with a toothpick. A little alcohol probably wouldn’t hurt.

Excellent work Michael. This brings back my childhood memory filling letters on my air guns with crayons. Obviously it’s illegal possessing air soft guns in Australia but I remember crayons worked brilliant. I’m not sure how it would stay on bezels which would rub agains sleeves…

Kool, thanks 😎 it's funny how surprisingly well the paint and wipe method Works in a variety of situations. And for that matter you can even color code your dezell with a couple different colors if you want for more functionality and it makes things a little easier on your eyes for quicker acquisition. On another note I really liked the music from the first time lapse and was almost hoping to hear a little Jim Byrnes as he's an incredible Blues musician.

This is what I was looking for thank you so much about to do my G shock blue for dolph 💙

Thank you very for all your work. Very interesting as usual. From Scotland.

@MyRetroWatches

4 жыл бұрын

Marc C thank you. Stay safe up there.

Great video. I use exactly the same technique when restoring the adjustment dial of vintage safety razors (like the Gillette FatBoy, or Slim). Sadly though, many 'modern' pieces increasingly use screen printing, making the restoration using techniques like this null & void. Old is definitely best!

10/10 Mike, well done.

@MyRetroWatches

4 жыл бұрын

Bill A thanks Bill

Well done.

Would have never guessed to wipe the bezel with your thumb to remove excess paint. Thanks for the vid and the share.

@MyRetroWatches

4 жыл бұрын

Supercruze you would have to be an artist to free hand paint those numbers well. You can see how I learnt this method.. first attempt I messed up so wiped with my finger.... oh hang on that looks great!

Excellent video and perfect timing for me! I'm getting ready to paint a (silver) bezel on my Seiko Monster in black and was flumoxed as to how to paint the numbers and indicies. I'm also going to paint lume over the white numbers and this will give me a perfect background for that process. Thank you and I just subscribed.

@ranaahmad1461

Жыл бұрын

@bruces12 did it work?

@bruces12

Жыл бұрын

@@ranaahmad1461 I gave up and just bought a new bezel in the color I wanted.

Nice Technet to us, I would not have thought of that.

Wow on my way to hobby lobby now thanks agin for tips 🙏 i called every where no one will do it

Awesome video!!

Glad to see you are out and about doing stuff. I do exactly what you do but I use an oil based paint pen for my Vostoks although I got caught out when I saw two marking sets on a 060 cased Amphibia were missing so studiously painted 'em in to find out they were supposed to be en flute so to speak so had to pick all the little markings all over again hehe. Am wearing a Seiko tonite, arrived today a Epson branded piece with a very Hi quality quartz Seiko (not Sii either but Seiko marked) chrono and a super thick calfskin strap. Has the high hand function where the main second hand is the chrono hand and I like them as my Miyota powered Oskar-Emil has a high hand so will be doing a vid on this and some acquisitions etc.

@spencer.watches

4 жыл бұрын

I used Elmer's opaque paint markers for the bezel of my vintage Komandirskie. Worked beautifully!

Clever idea.

Thank you for the Inspiration!

Great stuff

Nice content very entertaining and helpful thanks

Brilliant!

I just use a black or white very thin sharpie or marker of some kind and do the same thumb rub works well.

@cyber5677

3 жыл бұрын

Do you mind if I ask which one? I was looking at the fine point end one as well...

Amazing

Great Channel keep going !!! Subscribed !!!

Mix your lume powder with the clear to the desired consistency and works excellent been doing that a few years. I have a bezel I am gonna lume the bezel on a watch that has a solid black bezel and has deep recesses of the numbers.

wow. wonderful!!!

I customize a lot of bezels by filling the indent’s with a lume and clear fingernail polish. My blue and green are both white in day but I have an orange and a gray day green blue glow. Done lost of dive watches and quit a few chronographs like a Daytona fill in the tachameter around the bezel. Luckily most I do are naked and I don’t have to remove any old paint.

very good job

@MyRetroWatches

3 жыл бұрын

Thanks

Two words: bamboo skewers. I cut them in two and file a point on with an Emory board.

@andrewbarnes5802

4 күн бұрын

That was going to be my approach. Used a bamboo skewer this evening to mix and have a test paint to get the colour right. Took my car into the bodywork repair centre & asked the owner if I could get some touch up paint for chips, he presented me with two bottles, paint and a clearcoat laquer. Suggested application method, a wooden tooth pick.

For that area around the lume pip try using a hypodermic needle/syringe to flood the recess. It will allow for better control of the paint and make a sharper paint line. In the United States you have to ask the pharmacist for a bag of syringes and they'll ask you what size you need. I think a 21 gauge would work but if you get something to small the paint will be to thick to suck up. It may also be helpful to lightly sand/grind the tip to a squared blunt end. These are great for oiling as-well but you have to be carful you don't use to much. Only suck up how mush oil you want to apply. One jewel at a time. (Cheap alternative to a automatic oiler.)

@MyRetroWatches

3 жыл бұрын

Thanks, that is a good tip

@andrewbarnes5802

4 күн бұрын

I'd go with a wooden tooth pick, just make sure you thin the paint enough for it to flow in the recesses and corners

Great vid bro, we need some stuff to watch (sic) so I can get out from my mrs asking me to do things...like diy and sh*t...

do u think this would work on a G shock bezel using lume paint? I want to lume the writing on the bezel which is a rubber composite of some sort.

Gladys Knight had some pretty cool pips

I used to use enamel paint for models but now use an ink pen from Staples and rather than use my finger to wipe off the excess I use a little bit of isopropyl alcohol on a cloth because the paint dries faster than enamel.

@MyRetroWatches

9 ай бұрын

Thanks for the tip.

Like grouting a tile floor I’d do the pip surround with red and probably would be the same process.. paint on and wipe off quickly

Dip a sewing needle in paint and dot it on slowly

I wonder if I can do this for my smart waych it has some marks from work. It's black but it's showing the base layer it white could be plastic not sure what it is made of its a Samsung watch 6

So I can just use black angelus (leather paint) on the GG of my Gucci watch after I get it replated? Or do they need to do an enamel or something?

For the fiddly bit of removing paint look at getting a set of dental picks. Nice work too by the way.

hi..any tips on removing chrome off a bezel...thinking of removing chrome on my vostok amphibia bezel.think it'll look good with the brass look ..cheers

great video... got a question for you, i just bought an alpina startimer, model - AL-371NN4S6, but the hands are quite dark, I'd prefer them to be white like the newer - AL-372N4S6... I've contacted jewelers but they aren't interested in sourcing and replacing the hands.. so i though i could paint them instead... any tips etc?

Great vid. Did u consider using a different colour on the top mark with the lume? What about yellow to mask the faded colour of the lume a bit ? Keep up the great work

Liquid mask for modelling or liquid latex could help by the lumed pip.

Mike , please don't handle things after cleaning with IPA , you're undoing your work. Apart from that, well done , and thanks for the videos as usual most entertaining and appreciated.

If you use a wooden block with a damp acetone tissue wrapped round it, you should be able to clean up the edges of the luminous part in the same way you did the numbers, but with the flat block you won't dip into the middle ... you might also consider using a sticker over the luminous dot that you can peel off once the paint has started to go off but before it hardens.

@MyRetroWatches

4 жыл бұрын

Alain Moran Alain!! How are you pal!? There are lots of ways I guess to do the Lume dot. I just didn’t put much thought into that bit. It was midnight! I prefer it without the paint on 12. Stay safe old friend.

@alainmoran8560

4 жыл бұрын

@@MyRetroWatches Yeah I'm good ... hiding out at the moment until this all blows over. You stay safe too buddy.

hi nice & good video, May i know what paint is best? automotive touch up paint can be used?

@MyRetroWatches

Жыл бұрын

I can’t offer advise. I’ve only done this twice and just used model enamel paint.

Can you use a little Rodico on the pip to mask it?

Great channel. Was wondering what cameras / microscope you are using to do the video.

Hi there. Thanks for the video. How would you remove dried enamel paint from a non painted stainless steel bezel??

@MyRetroWatches

5 ай бұрын

Probably acetone

Red would be great around the pip!, IMO

would this method work on a ceramic bezel?

Would that work with a metallic gold pant?

Was thinking, could you add lume powder to the white paint to give you night time phosphorescence but without turning the paint green in the doing so?

@MyRetroWatches

4 жыл бұрын

Ian Watson possibly . It’s not like that originally . It whether it would show through or be too covered in paint. Would be worth a try.

Hi. Is this possible to cover this lume dot with something round to have sort of stencil around for enamel?

@MyRetroWatches

4 жыл бұрын

I’m sure it is . Would be the only real way to do it really. I prefer without the paint on the top part.

GOOD EVENING, CONGRATULATIONS FOR YOUR VIDEOS THIS VIDEO IS FOR THE NUMBERS, HOW IS THE REST PAINTED? THANK YOU FOR YOUR HELP.

How neat that thumb wiping is! Great video. I was wondering if you could tell me how you would go about painting the bezel on a snxs79 and what paint I should use? I have a spare bezel coming in the post that I would like to get to a glossy black. Cheers!

@MyRetroWatches

Жыл бұрын

Sorry I cant advise. if the bezel is steel and coloured then its most likely coated or anodized which you cannot replicate at home.

Great video. What is the title of the background music?

Awesome. What paint do you recommend to paint watch hands in black

@MyRetroWatches

2 жыл бұрын

A modelling enamel paint. Usually a matt colour. I have painted quite a few hands and they always seem to come out nice.

After painting, water resistant system will be staying?

Hi, thanks for showing! I suppose this would work also on plastic bezels?

@MyRetroWatches

4 жыл бұрын

Cristobal Osuna I’ve never tried but it’s only paint so as long as the surface is clean I can’t see why it would not work .

Thanks....very helpful....please may I ask details....Title, Album, musician of the Blues piece of music...Thanks

Do you think this trick will cut it for an Omega Constellation watch? I'm pretty lost at the topic. I've just discovered enamel but not sure if they're using something else on high end watches. Any advice?

@MyRetroWatches

7 ай бұрын

I cant comment really. as far as I know its all just paint on most watches. What else could it be.

Hola tengo un reloj Momentum m1 y tiene la parte negra del bisel raspado, como se puede pintar, yo pensaba con esmalte de uñas🤔 , muy bueno el video

I used to do this on hot wheels to make the grilles and such stand out more great video! I wich I had this kind of information some years ago (I have a Casio that is missing the paint on the outer case for the split button... I just shoved it in my drawer of failed projects 😩) well now I know what to do the coming few hours😁 Edit: I forgot to say that I didn't knew you could use enamel paint on resin cases I thought it would flake of or something

Hi Michael! Thanks for sharing your knowledge. I plan to craft lacquer dials and i was wondering if using enamel and baking it would be the right approach. Why baking? i thought it would make the paint more durable and make the flush sanding possible. Usually when sanding metal with paint tiny metall flakes get pushed into the "soft" paint ruining the results. So baked enamel paint! Would love to get your feedback on this topic. thx

@MyRetroWatches

2 жыл бұрын

Thanks, If I am totally honest I have no idea. I just picked enamel paint for its durability and ease of purchase from any model shop. The paint will cure and harden over time anyway and no need to sand certainly on this bezel. Sorry I cant be of more help.

Actually it's very good 😳

Hi, just watching this and curious is there a way to paint or print on a watch case?

@MyRetroWatches

4 ай бұрын

No Idea sorry. You painting onto steel so whatever would work. It would eventually wear off

I know this video is 3 years old butt it was the first one that popped up when I searched youtube...& I just have a question .. I have a friend who would like the bezel of their watch painted a lime green color it's a plastic-ey type of material also has some words written along the sides that they dont want painted over... I was thinking taping off the words with little pieces of tape.. a small paint brush and proper paint ... What is your opinion?

What is the alcohol you used called? An can it damage paint?

@MyRetroWatches

2 жыл бұрын

Just 99% ipa alcohol. I’ve not seen it damage anything. It’s the same stuff most of us have been using on our hands throughout the pandemic

Is this seiko 5 snz038?

Thank for the video, It does show me how to do it. May I ask the white paint you used is normal white paint or something special? And what paint should we use for the shiny black bezel? how to make it not mix with number while painting? Thank you so much!

@MyRetroWatches

3 жыл бұрын

Dinh Duy Lai can’t help you with the bezel as it’s not painted but treated , the black is impregnated into the steel either a coating to anodising . As for the paint I use like I say in the video model paint , enamel .

@dinhduylai3129

3 жыл бұрын

@@MyRetroWatches Appreciate your support so much!

we do this on guns all the time ,you can also use finger nail polish

Have you done this with lume paint?

@MyRetroWatches

3 жыл бұрын

No just white enamel paint.

Have you ever tried that with lume paint?You could A)lacquer over it later or B)mix the lacquer into the lume paint itself.Stay safe and well..................

Could you buy that part??

You have acquired good skills Mike.. what camera or editing are you using.. what work do you do. Thanks mike.

@MyRetroWatches

3 жыл бұрын

Film on my iPhone . Filmora is my editing software . My day job is running a company called Coventry Grinders Ltd

@johnrogers2253

3 жыл бұрын

Don't know how you do it.... good fun is what we all need. A good Laff. ⌚️⏰

Loom pit...I'd buy a bag of these shine in the dark stars for kids, the one made out of plastic you and stick on the ceiling. And saw off a piece, round it off, and put that in...

Great video, thanks! By the way, are you from Coventry? I live in Shanghai and it's so nice to hear a familiar accent!

@MyRetroWatches

3 жыл бұрын

Dave Cox you guessed my accent?!! I do live in Coventry yes but even I don’t think I sound Coventry

@davecox7084

3 жыл бұрын

@@MyRetroWatches Haha, that's so funny. I picked your accent in the first minute of the video!

@MyRetroWatches

3 жыл бұрын

Dave Cox are you from here originally ?

@davecox7084

3 жыл бұрын

My Retro Watches yes mate! Holbrooks born and bred. But left a long time ago. Germany, US, Aus, Thailand, China and now Vietnam!

Great T-Shirt can we buy one ?

@MyRetroWatches

4 жыл бұрын

Matt Pedwell maybe you have an ad blocker in your browser because I have a merch shelf under each video. Or you can goto my channel page and click the merch tab. teespring.com/stores/my-retro-watches?YT-ChMI64DluIi46AIVywcGAB330w_QGhhVQ3J6MEpqMDNubVhQOW9waWpjN19CX0EiGGxMLWhTYTQ5a2pXVlB0TzNGSjREbGZKaCiZiAJCEJ-YsQuxgbIL4_mxC6XNsQtKA0lPU1IFMTUuMTI%3D&UCrz0Jj03nmXP9opijc7_B_A

I know this is an old video, but wouldn't just replacing the bezel insert yield better results since they're relatively inexpensive? Or am I missing the point?

@MyRetroWatches

Жыл бұрын

It’s not an insert the numbers are stamped into the steel. Finding a new bezel for this model would be difficult.

Just waiting for you to paint the black part of the bezel. I love comedy.

@MyRetroWatches

3 жыл бұрын

?? Why is that even funny. Bezel is anodised.

I was waiting for the skewered pinkie ..

What paint did you use?.. also it’s a lot of work when you can buy a new ceramic bezel for seikos!... as this bezel is scratched as anything and would bug the hell out of me!..

@MyRetroWatches

3 жыл бұрын

I doubt you would get a bezel for this one other than a new OEM which is available. Its a watch I think from the 90s and I used it to demonstrate how you can repaint the numbers. effort was little and time was not a lot. result was pleasing. If scratches bug you then you would not like the vintage watches Seiko has to offer. For me I prefer a vintage to modern any day of the week. We are all different and thats what I love and respect.

@That_girl_052

3 жыл бұрын

@@MyRetroWatches fair play there👍 I like vintage design but with no marks or scratches!😂👍

What other kind of paint I can use on it? Wall paint? Steal paint?

@MyRetroWatches

4 жыл бұрын

Chrrlees Whitesand I just used enamel model paint.

How about the black part?

@MyRetroWatches

Жыл бұрын

That can’t Ben done. That is either a coating or anodising.