I'm a first timer , never had a gun in my hand and am about to tackle my 1 tonner and this content is invaluable, it's a trial by fire situation for me and this is giving me a direction to work towards, thanks mate 😁

@BogDustForBreakfast

10 ай бұрын

got loads of painting tips and trick videos mate be sure to check them out. thanks for watching

Awesome work mate. Love seeing someone that knows how to get it clean off the gun.

@BogDustForBreakfast

3 жыл бұрын

Thanks for the feedback tim

Great job, video wasn't to long, I enjoy watching these painting videos, I'm in America and I paint a little bit at my house, been painting for 30+ years and still learn things, thanks for the video look forward to the next one,

@BogDustForBreakfast

Жыл бұрын

Got 3 resprays to do this year so stay tuned mate!

the other was like 'micro' wellding...ffs, crazy, but I really enjoyed his, and YOUR video. I honestly really appreciate your work.

Looks awesome mate, I'm a painter myself and I know that feeling you get when a job is finished and it looks WET AND DEEP like that. So that clear is a Medium Solids clear by what you said. It did lay down nice. Great job mate, once again. 🇭🇲👍

@BogDustForBreakfast

Жыл бұрын

Thanks mate

Great to watch.really keen on the gun reviews.

Awesome video, love your work and thank's for the tech tips and knowledge !

@BogDustForBreakfast

Жыл бұрын

Cheers for watching mate

The HJ looks real good , love the metallic brown , great to watch

@BogDustForBreakfast

Жыл бұрын

Cheers for watching mate

Your prep work is ridiculously good

@BogDustForBreakfast

3 жыл бұрын

Cheers mate , as they say it's all in the prep work

That colour so cool.You did an amazing job on the paint and body to get it looking like that. I have a HQ sedan in orchid metallic that is a survivor and the paint is pretty tired. I love the HQ's

@BogDustForBreakfast

2 жыл бұрын

cheers for watching stew

Nice work mate. Need more videos like this. Full car spray jobs.

@BogDustForBreakfast

Жыл бұрын

There’s one big reason why I don’t do resprays more often . That’s not many people want to pay what I charge for a nice job . Also I enjoy me time . I have a wife and hobbies . I don’t wanna be working all the time .

looks Amazing great work mate !!!

@BogDustForBreakfast

Жыл бұрын

Thanks mate

Sweet paint job

@BogDustForBreakfast

Жыл бұрын

Cheers man

your video just popped up and i watched it,it amazed me how your clear just laid down for you at that temperature of 37,which over here 98.6, takes guts to paint a car at that temp,the chemicals are drying seconds after you shoot them to the panels,damn it looks nice,your overlap is perfect for those clears,nice job

@BogDustForBreakfast

2 жыл бұрын

Cheers mate

Looked awesome mate 👍

Awesome mate, simply awesome

@BogDustForBreakfast

Жыл бұрын

Thanks a lot!

Thst color is bad assssssss❤❤❤❤❤

good job man, love it.

@BogDustForBreakfast

Жыл бұрын

Cheers mate

Nice work.

@BogDustForBreakfast

Жыл бұрын

Cheers Ben

Excellent work bud

@BogDustForBreakfast

Жыл бұрын

Cheers mate thanks for watching

Beautiful colour and nice job dude looks killer 👌 I never painted with a normal size gun I’ve done a fair bit of airbrushing but nothing remotely like to this scale . I have just bought a ford streetka convertible in a normal solid red for my daughter it’s a great little car but there’s a bit of lacquer peel it’s 23 years old now so I’m gonna attempt to paint it in the summer as it’s freezing in the Uk right now so I’m learning all I can fingers crossed huh lol 👍

@BogDustForBreakfast

7 ай бұрын

It’s definitely an art . I absolutely suck at airbrushing lol hopefully my videos can help you mate

Great advice, thanks mate ....

@BogDustForBreakfast

Жыл бұрын

Thanks for watching such an old video of mine

That's a nice green, come up unreal

@BogDustForBreakfast

2 жыл бұрын

Thanks mate 👍

Looks reel good mate

@BogDustForBreakfast

3 жыл бұрын

Thank you

Awesome mate thanks

It's Gatzy, i get all this extra channels coming thru!, all good! 👍

@BogDustForBreakfast

10 ай бұрын

I appreciate that

nice work mate

@BogDustForBreakfast

2 жыл бұрын

Cheers

Nice work bro😁👍

@BogDustForBreakfast

2 жыл бұрын

Thank you! Cheers!

Nice!!!

@BogDustForBreakfast

11 ай бұрын

cheers

Fantastic job mate looks great 👍 then the customer rings and says I've changed my mind paint her red 😀

@BogDustForBreakfast

Жыл бұрын

Cheers mate.

nice work i see you use the dv1 base for base and for clear , goes well hey,

@BogDustForBreakfast

Жыл бұрын

They go alright . Old technology these days though . Far better guns out there . If you check out my newer videos I use Walcom these days

@camerongrady4644

Жыл бұрын

@@BogDustForBreakfast so much choice now hey

Awesome stuff mate can never have to much professional info Was there much gun setting change with the clear?

@BogDustForBreakfast

3 жыл бұрын

Hi mate , not really . I spray the same at every stage . The only time I'll change gun setup is if the temperature is really hot . But yes I did wind fluid out to 5 turns out on my last coat of clear . Thanks for your question

Awesome work buddy , loved watching it Did you use a medium or fast hardner for the clear mat? Thanx

@BogDustForBreakfast

Жыл бұрын

Used medium on this one . Probably needed a slow due to the temperature but had already bought the paint

Nice work looks real good No need to shorten the videos, there meant to be technical showing how to paint - not here to see pretty colours here see how you paint so don't speed up footage either - just my thoughts Gun settings and amount material used is also helpful cheers

@BogDustForBreakfast

2 жыл бұрын

Legend thanks mate

Hi.. Awesome work. I was curious though... when you apply the paint you seem to do about 50% coverage on each pass. But on the clear it looks like you are almost going over each pass twice. is that right?

@BogDustForBreakfast

2 жыл бұрын

Great observation Scott . I tend to apply clear with a 60% over lap when it’s really hot to keep the edge wet . Resulting in a nicer finish . I don’t always do this but I find in most cases in hot weather jobs come out nicer . Slow hardener would have been a better option on this day but I had bought the clear a long time before painting it 👍

Ахх,какая красавица,ни одна новая с такой не сравница,красивый кузов,твкую хочу👍👍👍

@BogDustForBreakfast

2 жыл бұрын

thanks mate 👌

Colour is atomic green a ve commodore colour,great job,i painted a vl same colour and had some mottle as well but im a diy bloke lol

@BogDustForBreakfast

3 жыл бұрын

Actually this was a factory HQ colour called march 17th green metallic. I just added a heap more gold pearl to the color .

@michaelsullivan2744

3 жыл бұрын

Ok sorry about that,with the amount of gold pearl looks like atomic green,

Awesome work. Also when doing a full body respray did you paint inside the doors and underneath boot bonnet 1st.

@BogDustForBreakfast

2 жыл бұрын

yes i done jams and all the insides first then done the outside . i do things multiple ways too though, some times its really difficult to remove and refit doors on my own so depending on the job and what the customer is paying ill leave doors on . this monaro was full of bog (from a previous respray from someone else) and the doors were extremely heavy so i left them on .

@mattbass_strait6030

2 жыл бұрын

@@BogDustForBreakfast I really enjoyed watch your channel and how you discribe what your doing

@BogDustForBreakfast

2 жыл бұрын

@@mattbass_strait6030 cheers mate

What sort of air pressure would be used. Car looks wild

@BogDustForBreakfast

2 жыл бұрын

1.6 bar base 2 bar clear mate

Hi Mate, Just come across this video, have been searching for someone doing a green like this, loved the finished job, how do you think the colour would have come out over a black wet on wet? thinking of doing it on my 67 Camaro. I am late to the party but have now subscribed, thanks.

@BogDustForBreakfast

2 жыл бұрын

Hi mate thanks for subscribing means a lot cheers . Using a black ground coat would require a lot more coats of green especially this Color as majority of the Color was pearls which are transparent . DNA paints have candy basecoats which cover in 3 coats! Have you checked them out ?

@markhunter9496

2 жыл бұрын

@@BogDustForBreakfast Haven't checked them out yet but will, thanks for the tip, I am still in the body work stage so will be a little ways off from paint, will be my first try, trying to do the full resto myself. checking out all your others vids now, tanks again.

@BogDustForBreakfast

2 жыл бұрын

@@markhunter9496 any time mate

Excellent I just found your channel It will be nice if can explain gun settings and pressure

@BogDustForBreakfast

2 жыл бұрын

Welcome to the channel . 3.5 turns out . Fan open . 29psi for clear 15 for base

@ARIASPHIL123

2 жыл бұрын

It’s a devilvis dv1. What you are using

@BogDustForBreakfast

2 жыл бұрын

@@ARIASPHIL123 correct mate and it’s a 1.3

@BogDustForBreakfast

2 жыл бұрын

@@ARIASPHIL123 the dv1 is pretty outdated these days . Still a great gun though but definitely better brands and guns out there

Hay mate just come across ya channel great stuff what did you sand the hq down to before spraying the first coat of sealer Doing a ht ute just about the same stage cheers

@BogDustForBreakfast

Жыл бұрын

Primer was blocked with 240 then orbital sanded with 400 then finished with 800 wet

@patriciaclogg7131

Жыл бұрын

Thanks a lot couple of weeks of to block it al merry Christmas to ya

@BogDustForBreakfast

Жыл бұрын

@@patriciaclogg7131 go comment on my last video to enter to win some big kid blocks mate . Might come in handy to block your Ute . Have a good Chrissy and new year mate

@patriciaclogg7131

Жыл бұрын

For sure will be checking more out thanks

Do you tac rag between coats of colour?

@BogDustForBreakfast

Жыл бұрын

Normally before sealer and before the last coat of Color or if I’ve sanded and nibs out of the Color .

Looks like synergy green, it was a factory color on Chevy camaro’s

@edwardzx7

2 жыл бұрын

ThTs what I thought also!

How do you do a hard fade on a two tone?

@BogDustForBreakfast

Жыл бұрын

Not sure what you mean mate ?

@19 minutes you said "i am adjusting my gun for the flat surfaces." What did you adjust and how? To me it looks like you are blasting tons of material on it, and I was afraid there would be a run.

@BogDustForBreakfast

Жыл бұрын

Adjusted fluid for more paint to come out , which allowed for the edge of the clear to stay wetter and to achieve a flatter finish. Which also saved getting dry over spray on my last coat .

Hey mate what grit sandpaper do you finish your body work in before wet on wet primer? Cheers

@BogDustForBreakfast

Жыл бұрын

400-800 mate anything higher is a waste of time and no gain. If anything you could face delamination of the primer base and clear

@marcgrimmer9008

Жыл бұрын

@@BogDustForBreakfast Thanks for the reply! I was just wondering how far to go sanding my polyester primer before handing over to painters. 400 sounds good

@BogDustForBreakfast

Жыл бұрын

@@marcgrimmer9008 poly is a little different . I’d be finishing in 240 if they plan to hs prime it . If the poly is similar to “all you need” and will be painted over the top without hs primer then finish in 400

Very nice I have a Hq Ute with panels in that colour but I don’t know the code my plan is to use that colour and do her as a sandman tribute if possible could you let me know the code but without pearls 👍

@BogDustForBreakfast

Жыл бұрын

Hi mate the Color is a single stage pearl . It may be a different Color to yours . The code is March 17 green metallic

@leighbrown1545

Жыл бұрын

👍thank you I have several early Holdens I’ll keep watching for tips but I do have a special one that needs a professional job and thanks again

@BogDustForBreakfast

Жыл бұрын

@@leighbrown1545 no worries mate . I have several resprays coming up this year which may help you

@leighbrown1545

Жыл бұрын

I’ll be watching 👍

Just a question do all show cars get flo coated ?

@BogDustForBreakfast

Жыл бұрын

Not necessarily. Flow coating is done for several reasons . Like smoothing tape-out lines or metal flake . Depending on the Color flow coating can give more depth as well, as a couple examples

@chrisoo8998

Жыл бұрын

@@BogDustForBreakfast what about a black would it give more depth doing a flow coat

@BogDustForBreakfast

Жыл бұрын

@@chrisoo8998 yes 👍

Looks great , Did you ever find out the paint code

@BogDustForBreakfast

2 жыл бұрын

It’s called march 17 green metallic

@BogDustForBreakfast

2 жыл бұрын

It’s a factory Holden Color

Why did you not put a non metallic base coat down before the pearl coat?

@BogDustForBreakfast

2 жыл бұрын

Because not all pearl colours are 3 layers

@RobWillmot

2 жыл бұрын

@@BogDustForBreakfast OK

How can u say the clear is thin but 2 coats will do ? If ur cutting it back an polishing I have a theory that the paint will last half as long as it would with sufficient micron build. As ll depends what the specs are on the clear. Doesn't sound promising Nice booth ✌️

@BogDustForBreakfast

Жыл бұрын

Was flow coated bro

@joz1751

Жыл бұрын

@@BogDustForBreakfast I have no qualms then, nice job. I'm a big fan of flow coat

what is the code color for this paint

@BogDustForBreakfast

2 жыл бұрын

Color name is march 17 green you’ll have to google it

F*ck yah now i want green..

What is the color or paint code?

@BogDustForBreakfast

2 жыл бұрын

March 17 Green

is the colour 2000 Hothouse green C172 - 870J ? good to see a video that actually shows what order to paint it all in and how to handle the roof. BTW why aren't you doing the bonnet at the same time?

@BogDustForBreakfast

Жыл бұрын

Color is March 17 green metallic. Was waiting on bonnet hinges to arrive . After 3 different hinges were wrong I needed to paint the car . Was no issue painting bonnet seperate

Hello, and I watched your video and I noticed when you panted the top of the roof you painted around about a little more than half and didn't go around to finish the other half. You started on finishing the quarter panel. But other than that I did liked the video.

@BogDustForBreakfast

3 жыл бұрын

hi mate at what stage were you talking about wow color or clear? you may need to re-watch the video ,clear coat- i start on the back panel, drivers side half the roof , down around the front then onto the roof then on the side . if your talking about right at the start when applying the wet on wet sealer ? i was blowing in transparent areas before i started on the color . no need to paint other side of roof as it was covered lol

@tommyboya5439

3 жыл бұрын

This was when you were painting. I thought you had to continue before it began to dry. Doesn't it matter, or is that okay? in that part.

@BogDustForBreakfast

3 жыл бұрын

@@tommyboya5439 if you were clear about what stage you were talking about I would help you understand it . Paint does dry out if you leave it long enough . The surfacer used had slow reducer , which means it evaporates much slower and flows out flatter . I can only assume you were talking about the surfacer as that was the only time I went back over a section , since I used slow thinner and harder it was still wet when I added more paint to those areas . It all melts in and has no dry spots or dry over spray . If I had of done it on the clear coat stage it could have left dry over spray around that area . Hope that answered your questions 😀

@cpzmelbs

Жыл бұрын

Still can't work out which part they're referring to.. and why their comment came off as criticism more than anything haha 🤷‍♂️ You answered a question I didn't have though, so thanks! That's interesting Anyways, 2 thoughts I had - Super nice colour, crazy it looked more like hothouse in the tin I reckon Also damn these monaros have some aggressive body features, especially the nose cone. I never appreciated just how sharp some angles are until seeing it getting painted. I liked the way you passed over the rear quarter and pillar. Curious do you know what these were like out of the factory, as far as paint coverage for example?

Sounds like the gunman a little

@edwardzx7

2 жыл бұрын

A little bit

@BogDustForBreakfast

2 жыл бұрын

must be the aussie accent👍

Didn't Jimmy barns write a song about these amazing cars (cold chisel)

@BogDustForBreakfast

Жыл бұрын

Good question . Sounds familiar for sure

@darrenmaclean6892

Жыл бұрын

Driving wheels

do you do private work for cash

@BogDustForBreakfast

2 жыл бұрын

I do mate depending on what it is ?

@BogDustForBreakfast

2 жыл бұрын

Feel free to email me at bogdustforbreakfast@gmail.com

@michaelbekendam5449

2 жыл бұрын

@@BogDustForBreakfast 2004 troopcarrier in good condition but would like a fresh coat of paint no rust

@BogDustForBreakfast

2 жыл бұрын

@@michaelbekendam5449 that’s definitely not something I’d be interested in mate sorry .

@michaelbekendam5449

2 жыл бұрын

@@BogDustForBreakfast no prob luv ya vids mate

Love the video I would love to see you do something like purple rain or a deep dark purple.

@BogDustForBreakfast

10 ай бұрын

cheers mate . its all down to what people want on their cars at this stage . but id be happy to paint some violet candy cars or purple pearls etc

@cookie.monster

10 ай бұрын

@BogDustForBreakfast im planing on paining my hj in the dark purple just want to see how it lays and what set up would be as there isn't much online for the purple.

@BogDustForBreakfast

10 ай бұрын

ask me anything mate ill steer you in the right direction. i work Tech support for DNA custom paints for a living . @@cookie.monster

I want to Watch the whole car be painted

@BogDustForBreakfast

Жыл бұрын

Watch this one mate kzread.info/dash/bejne/ZGaKsbWggJS-iLw.html