How to Open and Reseal 2014+ GMC Sierra Permaseal Headlights
Автокөліктер мен көлік құралдары
In this video I'm showing how to take apart GMC Sierra headlights that are sealed with permaseal. Once opened, I swapped the xenon internals for a damaged set of headlights into good halogen headlights. Also, installed clear corner makers for the turn signal from klearz.com.
2014+ Sierra Clear Headlight Markers:
klearz.com/sierra_headlight_m...
Titan Paint Scrapper Tool:
amzn.to/2RAlu7g
Пікірлер: 75
I appreciate the str8 forward talk! You even mentioned “don’t want to waste your time”...awesome! Most videos is all the pre-KZread stars (so they think) talking about stupid in related crap! GREAT VIDEO AND TECH!
You are a life saver! I have been looking for a video like this to remove my headlights. I was confused as to how to reseal but you explained it very well and showed it takes patience to pry the headlight. Thank You!
Mate you are a LIFE SAVER!!!! Thank you soooo much...
THAT is a LOT of work. Great job!
Sweet sweet video my man. My least favorite part about the stock headlights (apart from the bad light output) is those two chrome strips. They missed a good opportunity to make those something nice and useful like the day time running lights. Thank you.
Yeah these ones are super tough same as the Silverado. Almost not worth the work or risk!! “Almost” but the end result is awesome. Good job on the step by step.
Thanks great video doing mine this weekend
You should make a video on a 2016-2018 Sierra 1500 headlight 👍🏻
@forgedcustoms5699
3 жыл бұрын
It’s the same thing.
awesome job!
What did you do to replace the lens and signal lens ? Did you have the shave the plastic to get em out or they just unclip?
Ever work with the 2016-2018 camaro lights? I tried heating them and they wouldn't budge.
Would oven work? I used the over to open my 07 Escalade headlights and was a lot faster
Donde compraste las piesas
How did you remove the projector?
what heat gun you recommend?
Hey how much for a set already complete and where are you located
Amazing
Did you clear coat the paint?
250deg 20-25min and take the whole lens off in one cycle 👌👌👌
How much would you charge to paint match some 17 sierra headlights?
Can you do a video of the tail lights for this year vehicle?
Where can you order that plastic lense mine are scratched rrally bad and j wanna replace them insetad of buying a new headlight
How much u charge for these headlights my truck doesn't have the drls
Do you think I could use this technique on replacing just the lens on a 16 Sierra headlight? This is the only video I can find semi close to what I want done... but it looks as though the whole assembly is attached to the lens. I just want to switch lens’ if you know what I mean.
@GRCLights
4 жыл бұрын
The concept of taking the headlights apart is the same with the newer headlights.
How much do you charge to do this?
Have you done 2017 gmc 1500 taillights the new style led ones im thinking about color matching mine
@GRCLights
3 жыл бұрын
I've taken tail lights apart before but no, I don't have experience with the GMC tail lights.
Why not use a oven?
where did you get the led daytime running light kit?
@GRCLights
5 жыл бұрын
LED daytime running lights were taken off OEM Sierra headlights. The truck originally came with xenon headlight with DRL, but they were damaged beyond use (truck was in an accident).
Where did you find the plastic pieces for the new DRL boards?
@GRCLights
4 жыл бұрын
From used damaged GMC headlights.
How did you paint the chrome? Did you sand the surface of it prior painting? Did you use a special paint that could withstand high heat?
@GRCLights
5 жыл бұрын
The paint was done by the paint shop. They used regular car paint.
@busared06
4 жыл бұрын
You can strip the chrome with oven cleaner, or that purple cleaner/degreaser. For the degreaser method, most get a tub and let the chrome plastic sit in it awhile
@bailenforcementagent6597
3 жыл бұрын
I use moderate sanding (220G), “acid etch primer”, regular auto grade primer after the acid etch has flashed or dried, then base coat and finally clear coat! Keeps em’ shiny!
Can I send you lights for some work?
I imagine the perma would be the same toughness on the '14 Silverado
@GRCLights
4 жыл бұрын
It's exactly the same kind of perma-seal.
How many rolls of seal for a 2018 silverado 1500?
@GRCLights
3 жыл бұрын
A roll of butyl sealant, both from Morimoto and Diode Dynamic is more than enough to do a set of 2018 Silverado headlights.
Failed with Audi A6 headlights...do you have any tip for Audi permaseal headligjt?
@Ryan-rp1es
8 ай бұрын
I’ve done many new bmw lights that were difficult, but not horrible. Then I did some newer Audi light and OMG was absolute pain in the ass 😩
What’s the benefits of a heat gun vs oven?
@GRCLights
4 жыл бұрын
They are both the same. Oven is easier if you are new to this, but you can mess up with both methods. If you use oven, make sure you put the headlight on blocks of wood at bake 230 degrees Fahrenheit. Use electric oven only.
im so scared to do that on my 2015 tahoe.. im scared of leaks and not properly sealing. back or just fuckin them up
@gulsloft7323
3 жыл бұрын
man its crazy i did it for the first time and messed up because i lacked knowledge. My biggest issue was sealing the headlight back together. I did remove the old glue and messed up. i learned you MUST REMOVE your old glue and apply your new one
can i just reheat and reuse the permaseal glue?
@GRCLights
3 жыл бұрын
no, permaseal glue, also known as polyurethane sealant, does not melt when heated.
@mujjuman
3 жыл бұрын
@@GRCLights damn permaseal. Another reason to hate stupid permaseal
Where I can buy clear lens
@GRCLights
4 жыл бұрын
Google "Klearz" for clear markers, but for actual headlight lens cover there is no aftermarket as far as I know of.
@gmcsierra-te5oz
4 жыл бұрын
Thanks
Did you have any issues with leaks or anything?
@GRCLights
3 жыл бұрын
No, no issues
@forgedcustoms5699
3 жыл бұрын
@@GRCLights why no uploads anymore
@GRCLights
3 жыл бұрын
@@forgedcustoms5699 I will start again soon.
Would heating the headlight assembly in an oven make it any easier to remove the lens?
@GRCLights
4 жыл бұрын
Make it easier, no. The oven heats up the whole headlight, where as the heat gun only heats the area that needs prying. Once in a while I use an oven, just some headlights cover lens don't like heat especially Ford and BMW. If you do use an oven, use an electric oven at 200F degree for 10 minutes. Also, pre-heat the oven before use.
@mujjuman
3 жыл бұрын
@@GRCLights what happens to bmw lens in the oven
@GRCLights
3 жыл бұрын
@@mujjuman Heat cracks the UV protection layer making that spyder web effect.
@mujjuman
3 жыл бұрын
@@GRCLights Damn good to know
Save yourself some time, preheat over to 200 degrees, bake for 25-30 mins on a pan, plastic face sticking up. Dont forget to remove all caps, lights, and wires of course.
Make one for a 2016 silverado headlight
@GRCLights
5 жыл бұрын
Will keep that in mind when I get a Silverado headlight.
Is way better the oven 22 min 225 Fahrenheit you need try
If I ship you my 2015 gmc headlights and get u to install clears how Much would u charge me ?
@GRCLights
3 жыл бұрын
Contact us at info@grclights.com
Hi
That is not permaseal my brother. Trust me. Permaseal takes much more effort then that. No matter how much heat applied
25 min para abrir una headlight no mames
oven would of been better