Watch The Trim-Tex Mud Set Vinyl Corner Bead on Drywall Strength Test - kzread.info/dash/bejne/iamE07uJmM6-c7w.html

@wendyborja7988

4 жыл бұрын

Yo vivi en el salvador y yo aprendi ese travajo en los estados unidos pero me deportaron rregalenme un violin

@shiaparrirocumbiero1007

4 жыл бұрын

What kind a banjo its that? & where can i get one at? Thanks for t info. 💯👍👍👍

@Ali_87509

4 жыл бұрын

Mud box origine australie

@juanmiguel7832

4 жыл бұрын

Where can I find tha banjo and what’s the name

@endoalley680

3 жыл бұрын

@@wendyborja7988 Usted toca el violinzaso? Muy bien.

Hi Everyone, Watch a NEW video featuring a setting team of 2 smash the house out! - kzread.info/dash/bejne/qWSTubiHYsW1nLA.html. Check this NEW video about TAPEPRO's Flat Finishing Box - kzread.info/dash/bejne/m4t-29ifc92yl9o.html

Everyone uses different tools and has their own methods of taping and finishing. Each thinking their way is the fastest and best. You have obviously mastered your way. Good job.

@Maxkil

6 жыл бұрын

Thanks, yeah bazooka is quicker though. This is another tool by Tapepro here in action

@robertdunn7913

5 жыл бұрын

@@Maxkil Depends on the job. Where I live houses is to cut up and to many high ceilings for a bazooka. They only use them on commercial jobs and apartments.

@fernandoramirez7661

4 жыл бұрын

Your right 👍.

@johnzubil2875

10 ай бұрын

who invented the Bazooka.

@towndrunkjr.5420

Ай бұрын

@@johnzubil2875 Joe

I sit every morning with a six pack and pretend I'm the boss and watch people work and pick apart every little thing . I fire people all time and then I take a nice nap

@stevehairston9940

5 жыл бұрын

😂

Finally watching some on the way it should be done I've been using the tape pro box for years to finally see someone doing it the right way I know you'll have your critics but learn produced a videos to show how good they are good one mate

What is faster.. An automatic taping bazooka or a mud box? Vote kzread.info/dash/bejne/ZJubsNqCqdi-ipM.html

@Maxkil

6 жыл бұрын

Yeah I'm believing the Bazooka is faster. I want to try a bazooka. Expensive though.

@Maxkil

6 жыл бұрын

Yeah learning something and getting paid is definitely underrated. That's a good point people shouldn't forget. Thanks for the convo..

@TheSprayking

6 жыл бұрын

he might be speedy on 8ft , But once hes on anything over 9ft he's going to be slow as a snail...Bazooke would leave him in the dust, Also once you are on long walls again I would leave him in the dust...He doesnt have enough mud to keep up..hard worker that guy tho

@Maxkil

6 жыл бұрын

Yeah true that.. your right. Anything any higher than that would slow him right down... Can you shoot me some bazooka footage mate and send it to me.?

@philmay1347

6 жыл бұрын

I banjo and as long as you keep plenty of mud, to do away with blisters, and keep a decent pace, you're gonna cover some rock in a day. I grew up hand taping and the banjo saved me. Closets are where I really knock time off but my theory was this, if you make the taping trip as fast as roughing in and skimming, you're doing good. Keep on keeping on buddy.

nice video it will help with my next drywall project.

@Maxkil

6 жыл бұрын

No problems any questions just message me

@SpYucaipaSoCal

4 жыл бұрын

Love it just sell the corner roller

Man's brought Robin Williams back to life n got him taping corners sweatin like he still in that misses doubtfire get up 😂

Is this tool good for people who work alone? I have been using the super taper for over 10 years, do you know how does is compare to the super taper?

Bazooka is a whole lot faster especially if the roller and plow on same handle hands down. Agree he’s probably not going to have adjustment problems if you don’t keep bazooka in case or in the hand of fumble fingers he’s definitely not doing 9 ft top angles. Still fast definitely not record. Recorded would be keeping 5 guys busy with one bazooka.

@kidjetrecon7153

5 жыл бұрын

David D'sanps without a doubt mud rail that sits in buck is my fav for small jobs under fifty sheets nothing to clean up. 😂 I do know this if you’re not able to learn faster not harder this trade is very tough to make real money before your body says no way. I’ve tried over the years to be clean enough that the only sanding I need is a small sponge usually high edges after we got lax on plow or box setting adjustments. If there’s anything I hate about drywall it’s the sanding. I trace skim everything smooth if I’m involved. You know how it goes when your trying to coat five six hundred sheets. I would love to never have to do top angles. I noticed that a lot on videos from Australia. I love the freedom of drywall. I made ten times the money in the Gulf of Mexico running boats got back into drywall when my brother thought we could corner the market in 2000 running crews taxes got me and divorce 😂just didn’t corner the market the moneys in selling and working on tools.

I can see where using some of this is good. It is fast at setting tape.

A true pro. Great video

@Maxkil

6 жыл бұрын

Thanks Felipe. Thanks a lot

i find the super taper with the corner roller more effective because you can run much more tape in one shot

Does that mud box have a tension dial on the tape wheel to stop the tape from over spooling?

Nice taping bud

How is that gigantic gap between the wall and ceiling filled and taped?

@jaydencobb4305

Жыл бұрын

Confill

Nice video, you move like a 20 year old. I’ve learned over the years of working a crew that it’s not only the tool that’s fast but also the man running the tool. The tools are fast but if you have a man that’s slow or standing around then it’s no good. We need more workers like this MAN in this video, thanks for video

@Maxkil

6 жыл бұрын

Powered by money.

Where can I buy this exact taper? It has a feature that cuts the tape my banjo s so not

For me it’s all I know w/Drywall Eifs is the hawk tool for me

muito bom o trabalho de vcs ai no estado Unidos; bem diferente do nosso trabalho aq no Brasil

What do you do about fire taping the 2 inch gaps on top

soundtrack is irritating, it's like 2x as loud as the talk, fortunately it seems like you turn it off eventually. Otherwise, cool & thanks!

I'm living in NY, where can i learn to use this tool and the flat box?

@Maxkil

3 жыл бұрын

Learn in right here on my channel

I've recently bought the tapepro mud box for my internal corners. I'm having trouble with the top tapes dragging out of the corners. Any tips?

@alfainc5868

5 жыл бұрын

Hadn't used mine yet but use it like a bazooka leave a 3 inch tail or have somone with the roller give you a hold. I know the plow is for just what it does. But when i use one i still roll my angles hope this help guy.

Nice work guys!

@Maxkil

6 жыл бұрын

+TapeproDrywallTools thank you very much it means a lot coming from you guys. Just so you know word on the street is you guys have the best boxes

Hello, great job. Where can I buy the same banjo you have

I did drywall 35 years in the USA and its very similar but i never seen that type of taping banjo i have used glazer wipe down tool before and the boxes we have change to just basic banjo taping and hand finish your bed and skim coats. We plank our stairways the same way with the aluminum extension plank but the yellow mud never seen it and wood glue?in the mud?Wow need to try

@Maxkil

5 жыл бұрын

Hey Kevin, I probably shouldn't have put the wood clue tip in there. Its an unofficial method. Thats a Tapepro mud box. Much cheaper than a Bazooka works really well.

@petercervantes7220

5 жыл бұрын

Bros I'm like u ,in the union for 20yrs old man was in for 30and never seen woodglue, dish soap yes

@kevinc9963

5 жыл бұрын

I use the dish soap too!Blue Dawn not in the tape mud

@kevinc9963

5 жыл бұрын

if it works i would do it myself always looking for new stuff people come up with,kind of makes sense paper tape is made from wood I also notice he is not hand wiping out the corners or rolling them just glazing them,that's is faster by far I ;like to try that machine lol

Banjos work wonderfully on flat seems if you have fairly tight fitting joints and really speeds up that taping process, I'm not sure about inside corners because there's always that uneven gap that will not get filled with mud when doing it this way, better to push mud into corner gaps with a knife and then use tape or ever better a rigid metal-paper pre-formed corner bead will be more reliable even though it takes much longer I think its worth it, after all its quality drywall that is the final step that makes the walls and ceiling look beautiful in a persons house and you want it to last decades!

@Maxkil

6 жыл бұрын

Yeah true that. It's much better than by hand

Boa noite, Como consigo comprar essas ferramentas, sabes de algum site??

That handle mate? After the corner tool after he tapes in the internal s...?

Can we use this machine for top coat too?

Me podrias dejar el link donde compraste tu banjo, lo quiero identifico; porque se ve que es más económico que una bazuca

so you dont need to roll the tape first before glazing it? what size glazer is that?

@kirkdunn1379

Жыл бұрын

They both do the same thing, if the tape lays flat and is glued to wall that's all that matters...

Who makes that banjo I cannot find it anywhere online please let me know

@Maxkil

6 жыл бұрын

Tapepro .

@petercervantes7220

5 жыл бұрын

Bro it's under $100 goldbalt tools makes them,

Nice and easy good idea

Nice job. Nice machine too...

@Maxkil

6 жыл бұрын

thankyou

And where did you get that banjo? Thanks, great video.

@Maxkil

6 жыл бұрын

+nola grom latino that banjo/mudbox is from tapepro.com.au. it's a really good tool. You want one?

@deankitto4457

6 жыл бұрын

How do I get one of these and how much are they?

@antonbriggs5680

6 жыл бұрын

www.walltools.com/mbp-mud-box-pro.html $600.00

@nickjurgle7131

6 жыл бұрын

$600 for a banjo? No thanks. You can get a level 5 brand bazooka for not much more.

@Maxkil

6 жыл бұрын

With a million parts that weighs more and is harder to clean sure

Thank you for this wonderful video. Don't we need to put more mud after taping the corners?

@Bigboblit16

4 жыл бұрын

Yes, its called a corner mud box for the second coat. Or a pan full of mud & a 6" puddy knife.

@kbkbkbkbkbkbkbkbkbkb

3 жыл бұрын

@@Bigboblit16 6"?! You must love sanding 😂. I'd never use bigger than a 4" for corners!

Please can you help me I want same this one from where I can get it

Excellent job

@Maxkil

6 жыл бұрын

+Devin castillo thanks very much. Thanks for watching !!.

What size glazer do you use ?

Nice job i love it, and i have this material, i, m morrocan from spain, thanks you are profesionel.

Looks great and fast from 10' away in minimal lighting. That was inspiring to watch but I'd like to see how flat the corners and seams are up close in the video before I would consider purchasing this.

@Maxkil

6 жыл бұрын

Any closer and the cameraman would be in the way. It's worth it. it finishes well. I recommend it mate

@MegaDavyk

Жыл бұрын

They work just fine and its the glazing tool that finishes it. If your going to get one get the original one this guy has, the improved one is slower and more awkward to use.

@Maxkil

Жыл бұрын

Yeah a lot of people say the original is easier to use... Thanks for sharing the info 👍

Don't worry about plugging eny big gaps in your internals with chemical set first because that peace of paper will hold the corner together.

Not sure if you are meant to be using dry wall compound in wet areas?

@kirkdunn1379

Жыл бұрын

We red guard the whole bathroom anyway so water won't get behind it....or any waterproofer

Trabajando limpio y rapido, Porfavor donde se puedo adquerir estas herramientas, yo vivo entre españa y francia.

What state do you work in? I bet you can make better wage hanging drywall if you only need 8 screws per sheet! Watching the tape coat, I notice there's very few screws in angle any in field. Pretty bad hanging job there when so few screw's yet taper still has to set so many!

Hey where can i find that mud benyo

@maxkil la technique avec le rouleau pour ne pas tirer la bande au top mais j arrive toujour pas a voir comment tu fais pour avoir du leste de bande aussi vite au top

Interesting that you're not using the corner roller first before the glazer. I do it the same way, works fine and saves time.

Looks good I’ve only used stilts & 4”knife and mud w/Pan..Peace Stay Strong...

@Maxkil

6 жыл бұрын

Why do people use a pan rather than a hawk .

Por favor alguien que sepa español y me informe como encuentro el producto porque en el link de amazon no aparece

Y is ft. Here 2" gaps on the top sheet to the ceiling what R we filling those with ?

@krakenwoodfloorservicemcma5975

3 жыл бұрын

I imagine it’s for crown molding. Not sure though.

What the name of the banjo and where I can find it Thank you

@Maxkil

4 жыл бұрын

Tapepro mud box. Proplaster.com.au

@mishapolyakov64

3 жыл бұрын

@@Maxkil Thx, bro !! I'm a painter from New Zealand ! 🖌️👍

I already have a banjo. What's the name of the other tool he is using?

Holly crap!! I do drywall all the time,, looks like i need to invest in some new tools

@Maxkil

6 жыл бұрын

Yeah was a game changer for me too. I been doing things the slow way.

@BlossomPainting

6 жыл бұрын

I think this was the purpose of the Video... To enlighten the darkness of ignorance , which at one point we all started... The one who shares (Maxkil) is rich to find the time to share ,,, and its also up to us to be careful not to be complacent and keep an open eye for our improvements. Thank you

@Maxkil

6 жыл бұрын

Well said.

so the mud box he's using. Is that for sale anywhere? Looks like it faster than banjo

@Maxkil

6 жыл бұрын

Yes for sale and yes faster. Tapepro mud box. A great tool

The gaps in the upper angles are crazy

Is that just a regular corner flusher he is using to glaze the angles? How does it turn out without using a roller first?

@Maxkil

6 жыл бұрын

Yeah it is, I was surprised too, turned out perfectly. Which is surprising as everyone says that it wouldnt

very good video, both in application and use of the tool. where can i buy one... greetings

Donde puedo comprar. Todo este tipo de herramientas para agilizar los trabajos

I’m confused are you just using angle head do u guys roll it first but a bazooka

Can that be use on flats and joints? Or just corners?

@Maxkil

6 жыл бұрын

+nola grom latino hi, yeah the same mud box can be used on flats and corners.

@stevecooper3010

6 жыл бұрын

nola grom latino Both

Why do u use pva wood glue ? Because u put much water and It need stick more easier ? How many wood glue do u put for bucket? I Will try.

Wondering how excess water added affects the joint compound in the long run?

@Maxkil

5 жыл бұрын

loses its integrity the more you add i wouldve thought, turn more like water and less like a strong compound

Блин за границей давно уже придумали как упрастить работу, а в России блин колхоз и 19 век до сих пор!

Nice Video sr

That looks like a good banjo.hard working man there too.just wondered why is the gap in the ceiling corners so wide.i know it gets molding or whatever but why so big.is it to do with movement?

@Maxkil

5 жыл бұрын

No because the sheets are 1200mm X2 so it's 2400mm and the ceiling height is 2440mm

What’s the brand name ?? Can I buy this here in usa ?? I couldn’t find any banjo with cutter Thanks bless you

So no roller on the corners just flush ?

Nice and clean

Where can I buy this tool? Seems so ease to work with them

Veri good

@Maxkil

6 жыл бұрын

+سید غدیر روشن زاده thanks mate... Oh look it writes right to left

i need like this banjo that cut the tape .. mine that I have does not have this option , I need to cut it by knife

Where can you buy ( mud box )

Where can I get that tool and for what name can I look that tool?

I would like to see details thanks

U guys are quick in all ur videos. I'll give ya that. But I'm from America an I'm just curious. Why u hang ur sheet rock from bottom up instead of top down? I've noticed in all u guys videos the gap is at the top. I assume it gets covered with crown. But is that so ur houses can breathe differently or something? Jus curious

We use to use mesh tape on all our flats and butt joints and run Durobond 60 through our pumps and boxes. You better be ready to run your ass off and get your tools clean fast with that stuff!

Olá amigo qual o nome desta ferramenta que você está usando para ajusta a fita nos cantos

En mi pais.. ni x cerca esas herramientas.. Apesar q se trabaja bastante la tablayeso saludos desde el salvador!!

@pixmaspider

5 жыл бұрын

Mi amigo esa mierda no sirve solo cubre una pulgada y cuarto lo cual es muy malo para una esquina mejor es el modo manual que es casi 5 pulgadas para cada lado...

Nice job👍

@Maxkil

6 жыл бұрын

Cheers mate

I would like to buy Banjo, how much it cost?

@scotty3886

4 жыл бұрын

ill give you mine

Why is the wall drywall short of the ceiling that much?

Nice👍

Where did you purchase the taping banjo?

@Maxkil

5 жыл бұрын

Tapepro.. Google them, they make the best tools

WHY is their no vapour barrier in the ceiling holding the insulation back?

Where can i buy that i need me one of thosw

@Maxkil

6 жыл бұрын

$615USD plus shipping. I have a video of the mud box I'm going to release soon. If you want it. Pay to my paypal. But first tell me your city

Como eu faço para conseguir um quite desse ?

I apply by hand and put much more on. Enough to use my power sander.

Why are there such big gaps in the ceiling corners? Should the drywall not be installed from TOP DOWN, so the gaps or shortage in down on the floor where it could be either fixed easier of simply be covered by the baseboard?

@1whical

Жыл бұрын

maybe there will be crown?

@kirkdunn1379

Жыл бұрын

They use cornice moulding in Australia, not necessary to drywall up to corner.....different than USA

Why does the top angles all have gaps and no tape is that how they do it over there when they put crown? Even when theres crown molding the board is still butted up tight

@Maxkil

6 жыл бұрын

Yeah they leave a space. The crown here is called cornice and is made out of the same material as the drywall. Thats why is that space as there is no tape going over.

Where did you get that Banjo???

Whats up with those gapping gaps on the top angles? Crown im guessing?

Al do a video on monday at work and show u the speed difference

@Maxkil

6 жыл бұрын

+James Moore that sounds good mate. Can I share it on my channel.

@Maxkil

6 жыл бұрын

hey mate, get me some video to upload

Good job

Love you job.....

Hola muy buenas noches como puedo conseguir uno de esos soy pintor y me interesa mucho espero respuesta gracias

It’s nice to do things very fast you make more money the faster you get the job done but also please make sure it’s done right. I moved into a house where all the drywall screws were coming through the mud because the drywall guys tried to go so fast they did a crappy job.

@Maxkil

5 жыл бұрын

Yeah just because it's fast doesn't mean it's a bad job. Seems a lot of people have that impression. I mean there is only one way a screw can go in. It could also be twisted framing members over time.

@kirkdunn1379

Жыл бұрын

That's not a taper issue, that's structural

Bro..were did you get that banjo???

@Maxkil

2 жыл бұрын

That is a tapepro mud box