How to move the Lever on a Hydraulic Spool Valve away from the Ports and Hoses.
Is the lever on your hydraulic valve touching hoses or blocking access to your valve ports or is the valve mounted upside down and the lever box is in the wrong position?
This Short Instructional Video Shows how you can move the Lever and Lever Box assembly away from the valve ports and hoses by rotating the Lever Box assembly by 180 degrees.
Пікірлер: 7
Thank you great demonstration
@Hydraulic.Online
7 ай бұрын
You are welcome!
How can you connect both hand and cable controls?
@Hydraulic.Online
Жыл бұрын
Not sure about that application Brian May be better to do a search on the internet about that application try ("Wavoil" Italy) and ("Youli" Taiwan) for a start.
What if you want to rotate the lever at a perpendicular (90 degrees) to the valve assembly rather than a full turn (180 degrees)?
@Hydraulic.Online
6 ай бұрын
Good Question. On some lever boxes, this may be possible for example if they have 4 equally spaced bolts. In the model in this video, this is not possible as the lever box only has 2 diagonal bolts. Please be aware that it may not always be practical to rotate lever boxes through 90 degrees on valves with more than 2 spools or handles.🤓
@juanromano5765
6 ай бұрын
@@Hydraulic.Online In the case of my application it is a single spool valve. In addition can the handle go on the opposite side, next the assembly with the red tip? meaning switching the cap with the diagonal bolts and the housing of the lever?