How to Mount an Awning and Pelican box to a Prinsu Rack CHEAP & EASY! RAV4/Tacoma/Crosstrek/4Runner

Автокөліктер мен көлік құралдары

Welcome back to the channel! In this video, I answer one of the questions I have been receiving the most on Instagram: “How did you mount your _________ to the Prinsu rack??”
Some of the gear I have mounted to the rack is:
▪️Pelican Vault V800 Hardcase
▪️Roam Adventure Co. 5’ Awning
▪️FieryRed 4x4 Recovery Boards
Parts list for mounting Recovery Boards:
▪️4ea - 1/4" x 1" Stainless Steel Carriage Bolts
▪️4ea - 1/4" Stainless Steel Washer
▪️8ea - 14" Stainless Steel Nylon Lock Nut
▪️4ea - 1/4" x 7/8" Stainless Steel Coupling Nut
▪️4ea - 1/4 x 2-5/8" Stainless Steel Eyebolt w/ nut
▪️4ea - 1/4" x 1" Stainless Steel Washer
▪️Loctite
Parts list for mounting the Pelican Vault V800 Hard Case:
▪️4ea - 1/4" x 1" Stainless Steel Carriage Bolt
▪️4ea - 1/4" x 1" Stainless Steel Washer
▪️4ea - 1/4" Stainless Steel Nylon locknut
Links to my other Prinsu Rack videos:
Prinsu Rack Install - • 2019-2023 RAV4 Prinsu ...
One-Month Prinsu Follow Up - • Off-Road LED Bar Light...
********************************
2019 Toyota RAV4 Adventure - Build List
Wheels/Tires
fifteen52 17”x8” (+38mm) Traverse MX
Toyo tires 245/70R17 Open Country AT3
Suspension
Eibach Pro-Truck Lift Kit
Lighting
Diode Dynamics SS3 Pro - SAE Fog (fog lights)
Diode Dynamics SS3 Pro - Flood (ditch lights)
Diode Dynamics SS42 Amber Light Bar
Diode Dynamics SSC2 Sport - Combo (chase lights)
Lasfit Auto Lighting T10 LED Side Marker Bulbs
Tigger Wireless Controller 4 Plus Wireless Accessory Trigger System
LP Aventure Ditch Light Brackets
Power train
Ultimate9 Performance Throttle Controller
Comms
Midland Radios Micromobile MXT-275 2-Way Radio
Midland Radios Micromobile MXTA25 3Db Ghost Antenna
Midland Radios X-Talker T71VP3 2-Way Radio
Kit:
Prinsu Modular Rack System
Dirt Complex Trail Swing Wheel Carrier
Pelican Vault V800 Hardcase
Roam Adventure Co. 5’ Awning
RNOFIT Fabrication R4 Ladder Version 1
LP Aventure Skid Plate
RRW Bolt-on Sliders
Cascadia4x4 VSS Solar Panel
SetPower USA AJ50 50qt 12v Fridge
Audio
JBL Club 3020 3.5” Tweeter
Aesthetics:
BuiltNKO RAV4 TRD Grille
BuiltNKO ‘16+ Tacoma Raptor Lights
AutoClover RAV4 Window Visor
********************************
See more photos and content of my RAV4 Overland Build on blueyota4
********************************
Want to contribute to the build, channel, or just buy me a coffee⁉️
You can donate funds via Venmo: @dannyrocksteady
********************************

Пікірлер: 41

  • @thepdc6220
    @thepdc62203 жыл бұрын

    I was gonna tease you a bit for everything being new but I actually appreciate the help so thanks for that.

  • @crisdavid803
    @crisdavid8033 жыл бұрын

    How would you lock up mounting system for the traction bolts ?

  • @thatzfever7294
    @thatzfever72944 жыл бұрын

    Looks great!! I'm torn between the Roam Adventure and Pelican too!!!

  • @DannyRocksteady

    @DannyRocksteady

    4 жыл бұрын

    The roam is a great choice but it sits twice as high on the roof so it will cause more noise and drag, just my $0.02 🤷🏻‍♂️

  • @thatzfever7294

    @thatzfever7294

    4 жыл бұрын

    @@DannyRocksteadyvery true! I think I'm leaning towards the pelican because I'll still be able to drive into my garage I do not think I'll be able to clear my garage with the Roam box

  • @DannyRocksteady

    @DannyRocksteady

    4 жыл бұрын

    THAT Z FEVER that’s definitely something more than one person has brought up-I don’t have a garage but I’m sure if I did, it’d be hard to park with a roam or RTT up top.

  • @chopperskier
    @chopperskier2 жыл бұрын

    As always, very informative; thank you! I was wondering about the Ghost Antenna; I know NOTHING about radios - is this for a 2 way radio signal boost, or a cell signal booster, or a ham radio, or...? Thanks in advance - keep up the good work!

  • @DannyRocksteady

    @DannyRocksteady

    2 жыл бұрын

    It is the antenna for my midland MXT275 GMRS two-way radio

  • @mongrel420
    @mongrel4204 жыл бұрын

    Nice! I just picked up the pelican v800 on sale. Don't know if I want to mount it to the roof or just use it as a gun case yet tho

  • @DannyRocksteady

    @DannyRocksteady

    4 жыл бұрын

    Use it as both 😏

  • @Bookerdevin101

    @Bookerdevin101

    3 жыл бұрын

    Pelican just launched the Cargo line

  • @nathanshepard4225
    @nathanshepard42253 жыл бұрын

    I have that same halo bag xD

  • @salsabaca1999
    @salsabaca199910 ай бұрын

    Hey man I’m looking for a box and mount for my Prinsu rack. How’s it holding up? Would you go with another brand or keep what you have?

  • @mongrel420
    @mongrel4204 жыл бұрын

    I was thinking if you drilled the holes in the box to match the distance between the bars(10", I think) in the perpendicular direction, you can mount the box in both directions

  • @DannyRocksteady

    @DannyRocksteady

    4 жыл бұрын

    mongrel420 you could mount 2 boxes, but with the awning it would’ve be harder to get into the second one.

  • @Tekniix403
    @Tekniix4032 жыл бұрын

    I'm sure this has been asked somewhere, sorry if its a repeat. But... does the trunk still open with the ladder installed? If so, does it make it very difficult to open because of the weight? Thanks, good content!

  • @DannyRocksteady

    @DannyRocksteady

    2 жыл бұрын

    Thanks for checking out the video! I highly encourage you to check out one of the follow up videos I did-I tried to answer a lot of questions people have about this rack setup. Here is a link: kzread.info/dash/bejne/h5Vtkqprnam4otY.html

  • @Tekniix403

    @Tekniix403

    2 жыл бұрын

    @@DannyRocksteady Was watching that video as you were replying and it answered a lot of questions. Thanks dude! I'm excited to start my first build this summer!

  • @op-bi5rs
    @op-bi5rs3 жыл бұрын

    Hello when you install ladder bottom gonna hit bumper ?

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    It touches the top of the rear bumper but doesn’t “hit” it

  • @ThatCleanMT
    @ThatCleanMT2 жыл бұрын

    Great setup. I personally would have gone with the higher up model Pelican case. The Vault series are incredibly inferior to their normal line.

  • @DannyRocksteady

    @DannyRocksteady

    2 жыл бұрын

    It has since been replaced by a roam rugged case 83L--at the time the vault was the tallest offering available for a case of it's type. There is a follow up video on the channel with how the vault faired against the elements during the time it was on my rack.

  • @ThatCleanMT

    @ThatCleanMT

    2 жыл бұрын

    @@DannyRocksteady I ordered that case too. Did you purchase the east detach mount clips?

  • @DannyRocksteady

    @DannyRocksteady

    2 жыл бұрын

    @@ThatCleanMT no, those didn’t exist either when I made the switch. I’m using mounts from Sherpa Equipment Co.

  • @deadbrainn
    @deadbrainn3 жыл бұрын

    Whats the size of the carriage bolts for the awning? Its not in the description. Thanks

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    It’s the same one as the others 1/4”x1”

  • @deadbrainn

    @deadbrainn

    3 жыл бұрын

    Thanks man!

  • @lennyburt7419
    @lennyburt74193 жыл бұрын

    You mentioned it’s water resistant not water proof. Any issues?

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    Nope-have had it rained on and ran it through car washes with no issues thus far.

  • @zohamohammed7098
    @zohamohammed70983 жыл бұрын

    Does the rav4 adventure have a sunroof?

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    Mine doesn’t

  • @keleehall5358
    @keleehall53583 жыл бұрын

    What size are the carriage bolts? & nuts?

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    They’re listed in the video description

  • @DavidsOutdoors
    @DavidsOutdoors4 жыл бұрын

    What is the gas mileage with that rack from your last video? I have the hybrid and I get an average of 35mpg :(

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    23 MPG

  • @paulwhite6367
    @paulwhite63673 жыл бұрын

    bought a 19' 4R pro and it had a prinsu on it. Doesn't have the slots to insert a head like this one.....hmm

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    It could be that the bars are installed with the slot side down. Check the bottom of the bar and turn them around if necessary

  • @paulwhite6367

    @paulwhite6367

    3 жыл бұрын

    @@DannyRocksteady yea I thought the same thing but nope....same on both sides

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    @@paulwhite6367 you could still run bolts but you’d have to undo the ends of the bar and slide them in.

  • @paulwhite6367

    @paulwhite6367

    3 жыл бұрын

    @@DannyRocksteady yea I think this was a previous model/year. Didn’t think abt that....thanks a ton

  • @DannyRocksteady

    @DannyRocksteady

    3 жыл бұрын

    @@paulwhite6367 no problem!

Келесі