Mod your car at MartiniWorks: bit.ly/4286iRg

@Rmmlom

7 ай бұрын

You found your shaver. The other channel. 😅 Thanks man, love your takes on BMW. COOL..!

The official Honda for people who buy designer clothes lol damn he got me

i feel like everyone forgets we got the 335d in the states. Surprised you didn't mention the m57 at all considering its a tank that runs forever and gets 30+mpg. Also with the right modification its the best sound E9x in my opinion.

@ljfran2383

7 ай бұрын

There was one on this vs that on the hooligan channel that had compound turbos

@kylekramar5752

6 ай бұрын

@@ljfran2383 they all have compound turbos

@felixwilsson1786

6 ай бұрын

u dont have 325,330d?

@ljfran2383

6 ай бұрын

@@kylekramar5752 well thats pretty cool, I had no idea. That's wild for a factory car

@thedandy6765

5 ай бұрын

30mpg really isnt that good for a diesel man it should do 40+

335i n54, downpipes, intercooler, fuel pumps, port injection, single turbo kit, 5k for maintenance, tune, lsd = 600-800hp depending on turbo with unopened motor.

@andressandate1199

7 ай бұрын

600 is doable with those mods but unopened motor trying to push 800 , you’re just asking for it to blow

@ahw5hcgfyj

7 ай бұрын

@@andressandate1199 say that to the thousands of people who have been running at those power levels for years on unopened motors. hp doesnt kill these cars, high low end torque does, which can be tuned out, and is much less of a factor with a single turbo compared to twins.

I bought a 335i 3 years ago for 8k it was already built and had every repair done! It was build at redline performance in Knoxville Tennessee! It had 600HP and was super reliable! The only thing I had to do was to replace the serpentine belt

@Jakejacobsonn

7 ай бұрын

I got one 5k 240k miles and it’s fucking immaculate. Came with pure 600s and 535 lpfp full m suspension figured if it goes out the pures and suspension makes the car worth it.

@ThruDaLenz

5 ай бұрын

had??? what happened to it?

@Chriskary1

5 ай бұрын

@@ThruDaLenz sold it and I wish that I didn’t

@ThruDaLenz

5 ай бұрын

@Chriskary1 And if you had kept it, you probably would've wished you sold it.... Life is funny like that

@Chriskary1

5 ай бұрын

@@ThruDaLenz exactly 😂😂 I was scared I was like what if it something mechanically were to go wrong I was like I can’t afford that! I had it for around 3 months

E9X M3 is probably the best drivers car out there. Love it F30/31 next?👀

Super fun to watch this video after owning a black E92 for the last 8 months. I bought a 2010 EU 325i, so with the Na I6 N53 with 218hp,. with 140k kms and it was the one that was best taken care of from the bunch that I researched. And with aftermarket exhaust and M sport package. Also if you are curious wheels are BMW 225 style so 19 inch 35 sidewall. Next up for me is spacers and Eibach pro-kit springs. Man this car is so so so fun, the drivability is insane for a 13 yo car. It's good looking, and with a couple aesthetic tweaks it just doesn't look like like a car from the 2010's. But of course let's talk repairs. I had to do quite a lot of maintenance for it to idle with stability. Thankfully most of it covered by the second hand dealership warranty. Others made by me and my mechanics. In my case it has been: Coils and spark plugs, Injectors, Oil filter housing gasket, Valve cover gasket, and more typical maintenance. With these repairs my mechanic told me "is the best running N53 I think I've ever seen in the shop", so super happy about that. If well taken care of the non turboed N53 are tanks. Next up here is walnut blasting for sure. All and all -> Would recommend, the repairs have been worth it, I'm loving my car and I'm learning a bunch on engine repairs lmao

@helderamaral4578

6 ай бұрын

hi, i have the same car. Mine is a 2010 325i RWD with a manual gearbox with leather interior, m sport package and idrive in saphire metalic black. I Own it for 2 years now and the only thing that broke down was the nox sensor and the radiator drain plug. i do the maintenance myself. Has m sport exhaust, m220 whels from the m3, carbon bmw spoiler, intake refractor delete. Next mods are lsd diff with diferent gear ratio, 3 stage intake with remap. Love the car and i hope you like yours too.

My n52 328i is going on 300,000km and its been so good to me

Love your enthusiasm and the channel, keep up the good work❗️🙏

I enjoyed watching how this video breaks down modifying the E90 BMW. It's fascinating to see how individuals can enhance both the appearance and performance of their cars. Recently, I upgraded my BMW with a carbon plenum from Euro Power Motorsports, and it's been a fantastic experience.

Man those B-rolls at the intro is basically how see my stock oem E90 328i and the thing is a N51 haha no 335i pulls, still really nice. I just love the balance of the saloon.

One of the best bmws to modify my first car is a e90 and is sick definitely gon buy another one in the future

Love my N54 335xi. Picked it up over the summer bone stock, old-man driven, never seen a winter and with only 54000 KMs. That being said, the clutch slave and master cylinders went recently lmao but I’m looking to push for more power in the spring 😼

@darealgeemattey7010

7 ай бұрын

Make sure you start with catch can, radiator, and intercooler. The reason why a lot of gaskets fail is because engine bay temps get too high. Save you money and maintenance down the road and invest in cooling before tuning!!

Another good video I hope you talk about how to modify a C5/C6 Corvette, Cobalt SS, or DSM next

Just bought safe and sound bmw e91 330d manual early model with gods hand made m57. I love that thing with 310hp and 600+ nm🥰

@lukaspumeris9340

7 ай бұрын

should make 750nm ish on a stage 1 with a proper tune and xhp :)

Niceee video, really enjoyed it hahahh Can we see the F30 next? I know they might be pretty similar, kind of the same thing, but hey, add your touch to it like always

If you got a N54 you most definitely need an oil catch can. For the high side and the low side.. either block off PCV ports in the head or buy a PCV delete.. if you don't you're going to constantly have to take your intake manifold off and walnut blast your intake ports. If you're running port injection that will help keep the ports and the valves clean... But you want to try and avoid having to deal with it all together

@Jakejacobsonn

7 ай бұрын

High side barley does much better off doing it all together like you said full external pcv but for the fucking headache of trying to get that crankcase pressure right for the external I almost don’t mind dealing with walnut. Even easier just do the pi like you also stated lol

@Joel2.24

6 ай бұрын

K, I have a 325xi wagon. Any extra tips for the bimmer

I needed this video thank you

this is what ive been waiting for! :))

Took almost 700whp 31 psi misfiring and pulling -7 of timing on all cylinders and beating the absolute balls off of it for it to crack a ring. Things can take a beating lol

the video we all been waiting for

My E90 N52 currently running with a 3D printed intake manifold, running alpha-N Tune, with no throttle body and a customizable ratio xdrive with 6 speed manual

Cmon, more people need to see these guys.

got a 2011 328i xdrive with a n51 bit the fastest but still super fun to drive especially after the st suspension i installed it’s a dream to drive

To be honest I’m surprised you didn’t mention the 335is, I love mine and not a ton of people know about em

@Maarnu_

6 ай бұрын

the 335is is a dope car, but the second you even think about modding it the resale value TANKS

@TK-ji8lf

6 ай бұрын

@@Maarnu_ gotta do what u gotta do man, won’t catch me driving a stock car haha

I'm not a BMW guy, but I've been considering grabbing a 335i to mod. Great info on the typical failure points in terms of maintenance.

The thing i like the most about the e90 is how timeless it looks. I have a Pre LCI 318i and it still looks pretty damn modern nowadays

I have a e90 wagon and I have been thinking of doing stuff to it and this just convinced me too

Quality video as always🔥 Can we get a b58 video from you my man (M240i ftb)

I got a 335i 2013 coupe, I wanna start improving performance. What should I start with. I’m looking not to go crazy but around 100 more hp and louder exhaust.

Cool fact: N52 can run without an intake manifold. Attach some runners and you got “budget” ITBs due to Valvtronic motor (with a tune)

I’ve been working on getting everything fixed on my e90 330i and it was the best investment ever. I love driving it so much!!!

Okay great video but a part with more on the n52 engine would be nice

Any tips for 2021 bmw G21 330e touring ?

Can you do on a e46 330i trying to figure out to get a regular 330i o find the zhp version

Ive got one and love it. I would have liked a bit more in detail on the n52, as i think its a great daily personally, and at least in the 328, you can get to 330 numbers which are close to stock 335 numbers. (with more work, can smoke them) As for mods, you can go to m sport stuff, and give a really clean OEM plus look. Wheels can be BBS RS GT's or something similar. As for interior, the lci use the same drive system as the f30s and can be modified to have apple carplay which is super modernising and convenient. Also what other car can you get so many OEM licenced modifications? You can get Alcantara shift boots and licenced short shifters, its just cool. You also didn't talk about the lci's, but I guess its not about buying them, its about modifying them. Also its really cool how you are able to talk to a bunch of different people about it, because unlike your 07 wrx or whatever, older adults love talking to you about their old cars, and its kinda cool to hear their stories, and i think they let you in a bit because its not as flashy as an f30 or something. Finally, its a BMW, so... it sounds cool to talk about.

@CocktailESP

7 ай бұрын

Ha funny you mention about older adults. I've had the same experience, after I restored some old looking exterior parts in my E92 and installed a couple more now it has a clean OEM+ look and I've striked a couple conversations in the big parking where my car sleeps. Normally older gentleman with older generations BMWs, pretty cool stories

@connortidman6925

7 ай бұрын

@@CocktailESP yea, I had a conversation with a Porsche owner about my car. They kept saying how impressed they were that I was going to do everything myself

@Chris-gj4do

7 ай бұрын

+1 on the N52. Currently around 300 crank NA power 7500rpm and I’ve seen up to 315 crank NA power on this platform. Boosted, it flows better then N54 and N55 and can handle around 550whp before needing internals

@SharamanONorgannon

7 ай бұрын

You are not touching a 335 in a 330 without going pretty far... And CIC is not nearly the same as ID5/6 lmao N52 owners forever reaching

@AnthonyGonzalez-zy5zm

7 ай бұрын

@@SharamanONorgannonlol I agree I loved my 330i buts it’s no where near as fast as my 335i

Hello do you know the measurements of an e90 headliner with the sunroof?

Now you have my full e91 attention!

so you left fitment to do the same thing?

E90 is the drivers car. People that enjoy driving and feeling connectivity to the road. Definitely needs suspension upgrade because it's too comfort oriented and feels like a boat without them.

Im buying a manual 2010 n55 335i, it has 69k miles on the clock. Im planning to overhaul the entire engine and do some reliability mods when it gets built back up. I have already got my steering and handling mods including uprated brakes ect. Im only looking to push around 400-450hp. My main focus is just pushing that amount reliably and also focus on quicker shifts through upgrading the clutch and using a short shifter. Really and truly im trying to create a track/street build that focuses more on cornering than going sideways. Any tips?

This was great! But if you're going to mention the E90 then you have to do the E46 :P

E91s are pretty rare in the states and they look better than any other e9x imo props to anyone with one

"ask about if there's been any repairs to the oil flow and the hydraulic valve lifter issue...those have a tendency to fail because of their design"...a huge amount of them were recalled back when they were new, so the ones on the road today don't have lifter failures. sure, they tick, but its a non issue. what you really need to look out for is Oil filter housing gasket leaks that can cause your belts to fail and get sucked into the motor. from my experience and understanding, that's about the only regular catastrophic failure that the n52 is subject to. there are other failure points but usually not catostrophic- water pump, mickey mouse flange, GM auto trans. fantastic motor and car overall

Alex I had a martini works hat signed by you from last years slammed enuff but it flew out my car recently, any chance I could buy another off you?

Can you make a video How to modify SW20 MR2

Yo Alex, can you make a video on how to modify a b8/b8.5 S4/S5?

@AlexMartini.

7 ай бұрын

I can!!!

may you do the 2000 civic coupe ex next please?

Side note for the n45, and a decent amount of other engines from BMW, 90 percent of the surrounding parts are plastic, which is why the valve covers are so prone to cracking and breaking from the rapid heating and cooling.

I have a problem with my 2011 328i e90 everytime im like posted at a stop light if it idles to long it begins to squeak bmw bros lmk cuz i deadass cant find a vid in relation to my problem 😔(edit) i was locked in on the vid it is not the e90 even tho they have they exact same body scepts its just the 328i v6 3.0 liter inline yk super torque havin driftmobile type things however not to long after purchaee i started to experience the idle squeak dilemma pls lmk if you know anything abt beamers much abliged and thankyou kindly

Love the new platform but still sad you left FI. ❤

e82 next! btw i met you briefly at sema (just a fan of the content)

His commentary I between is crazy 🤣🤣🤣

I just think the e9x looks gorgeous cruising on the highway if driven correctly.

Boy I've missed that intro🔥

Can someone please tell me what bumper is on the cover of this video trying to get it!

People always forget how nice the e91 looks done. All about the wagons.

Hello sir i have a 2011 328i n51 . Which is pratically the n52 with a 3 stage manifold . Any advice

@imsoBoogy

3 ай бұрын

Looking into getting the same year n model.. get the advice you were looking for??

I got a 335 xi e90 and actually got my wheel and tire setup from FI and the tires debeaded within weeks lmao. But you were spot on about most things but the heart of it is actually super solid . It’s the Mitsubishi turbos , walbro fuel pump that’s part of a class action and all the other out sourced parts they use . Also the vacuum lines are in awful places so they burn up and leak if you don’t upgrade to silicone lines but the sequential turbos , the aftermarket support and the ridiculous ease to tune them ( I had mhd and it was flawless) makes it’s all worth it. Oh btw don’t get a awd car if you plan on doing downpipes . Trust me you’ll thank me later

I think a vid for the Focus ST/RS is needed, people are still buying them!

Can’t find E90 thread

Should I mod my 328i at all? I know I cant really get much hp gains, but what about suspension, body kits, wheels or other exterior costmetic things?

@spicysnowman8886

6 ай бұрын

You can do headers, 3 stage intake, and tune for good power gains.

@broskiez2641

6 ай бұрын

@@spicysnowman8886 yeah i guess, but still not faster than a stock 335i so it feels kinda pointless.

@vee4free

3 ай бұрын

All the things he mentioned for suspension / wheels you can do to a 328i

Do a video with an E46

How about e92s 👀

How to modify a 7th gen Toyota Celica please

Hope you talk about the Hyundai Genesis Coupe soon

how about how to mod a BMW e82

How to modify is300 1 gen

Just bought a 12 328i and am waiting for something to need work before adding go fast parts but that’s just me

8:54 Can confirm that something did break, water pump :(

please do e60 next!

The second wheel fitment recommendation you gave wouldn't work on non-M e9x, maybe the source you got that data from is for M3 e9x, those will fit nicely and already be on the wider side on an M3, but won't work on non-M, not even with rolled fenders.

M57N2 on top :)

As an owner of an E90 M3, I agree with all of this

E90 really grew on me indeed

Makes me sad the 335d got one sentence in this video, such a slept on combo in these cars. Things a tank. Love mine, Find one low miles one with clean history. Preferably one with glow plugs/module replaced, injectors recently and thats about it. If you get an X5d look out for a transfer case as well replacement before buying. Otherwise delete it and drive it. They are without question the more reliable engine package. 350hp, 585ft-lbs reliable. Find one before you cant.

Do the e60 550i next 🙏🏽

Please do a Ford focus St video!

Subbed

I own and love driving an E92 328i (sport pack, 6speed manual), but unfortunately these E90s are the same old BMW story. Solid engines and transmissions internally, but every piece around them fall apart. Just last month my starter, coolant expansion tank, and oil pan gasket all gave up. Seemingly unrelated issues that most cars have no issues with at 150k miles. All of my modification money keeps getting swallowed up by maintenance. On an unrelated note, does anybody wanna trade for a manual TSX or G37?? 😂

w211 would be interesting to see :)

How to modify f30 next please

I’ve owned an e46 330ci and currently an e9x 328i. Reeeeeally wish I kept the e46

275/40 R18 in the back of my e92... Lol.. I need to roll the fender... It rubs when I hit a dip

@r.l2443

Ай бұрын

Try 275/35 r18

I wish I could make a business out of saving e90s. Sad to see how they’re treated

Is there any power diff between e92 and e90?

@stephandartiguenave6314

3 ай бұрын

No

Do a video on how to modify a bmw F06

love this

I have a 335i, does 275 and 245 fit?

@stephandartiguenave6314

3 ай бұрын

It can I'm running 295 in rear and 255 front

Get yourself a 330d- N57, turbosystems stage 3, watermeth, intercooler, downpipe and intake and you'll be well into the 350-400hp range. Best part is, 550 + ft/lb

can somebody help me with 528i

Can you make a how to modify a BMW E60 too ?

My E90 doesnt have iDrive :( i have a 318i Definitely gonna put alot of work into it, once i figure out the issue i have atm. Supposedly the mechanic i brought it to found metal shavings (when i push the car it shows me an oil light in red) so i now have to do an oil change, filter change, clean out the oil pan and before i do anything about the timing chain i'll do the chain tensioner to see if old oil + clogging might have caused it to malfunction, since the chain isnt sitting on properly (even after getting the engine warm the chain has give, which it isnt supposed to have) Wish me luck guys, first car, bought 6 days ago...

I would really Love this on the Audi a5/s5 8t/B8 3.0t, appreciate the great content

I went with 17x9 in the front and 18x10.5 in the rear, yes it surprisingly clean as FUCK

I modded my e92 335is. Just need to run the correct oil for bottom end. A crank seal protector on a N54 is useless you can add it perfectly on correctly it will wear down and fall off onto the undertray. A bad silicon inlet can get kinked behind or the front just won't fit so relocate or run stock intake. big intercooler is great but what do the stock turbos want to do? downpipes are fine but what's the point? I think N54 needs either all or nothing FBO is a joke for any N54. They're crap. I'd take a stock N54 over FBO.

@PartiBuoy

7 ай бұрын

The bad mods will throw it into limp mode a kinked rear Inlet will mess with the rear turbo and keep you from doing a full pull. HPFP is just basic maintenance. expect to cough up plugs and coils every 15 thousand miles on a tune and injectors need to be fully upgraded index 12 and teflon wrapped. I think you are right about the bottom end it's always concerning but only if you are FBO. good luck fitting downpipes on a DCT E92 335is I did the arm DP. it fits it's just impossible to connect the dual M series exhaust. access is denied. and God help whoever needs to remove the ARM DP on a 335is. rather God help you if decide to install DP on a 335is. they work fine but trust me you don't want to do what I did to get them on. BTW the down streams don't clear the transmission. if you want to do it the right way relocate the downstreams.

@anthonybomicino3276

6 ай бұрын

​@@PartiBuoyVRSF on my IS was no prob

i've have a 328i and a 335i. wouldn't trade them for anything other than a e90 m3 haha

Aliexpress have some cool headlights, but i cant afford living in Brazil 🇧🇷 😢

Yesssssss

6th gen camaro next !