Project Files: www.patreon.com/posts/29311719

For anyone asking, you don't need this plugin to get the same result. Just make a polysurface and then use the command "rebuild", you can then increase the U and V count for each surface. Also depending on the size of the surface, when you export the stl you may have to reduce the tolerance to the one-thousands place. You can go higher of course, but it will take much longer to process the stl. I had some stl's in meshlab get bugged out when i was reducing the surface count but once I got down to below a 1000 it fixed itself. So keep reducing the count if you see this problem.

@amybrar5553

3 жыл бұрын

thought so, thanks for confirming!

@uglybsnjz720

2 жыл бұрын

How do you get the sharp edges than the smooth ones while controlling the points?😟

@davidaseweje

2 жыл бұрын

how do i make the edges sharp

How do you change between smooth edges and the edgy appearance of the surface?

Nice video, but too fast. It would be nice if you can tell which commands you use to create all of this.

Hi, how did you change the curved appearance of the surface to a straight edge?

Hi! Thank you for thé tutorial! I have to model a Boulder Hall. Do the steps also work on a rounded surface?

does the surface in rhino have to be shaped with tsplines?

Thanks for the tutorial, this helpes me with one thing that I havnt figured out!! Thanks

@HowtoRhino

3 жыл бұрын

Hey Ricardo, Thanks! Glad you like the tutorial! If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! Please reach out and send me an email at dusan@howtorhino.com if you're interested and I'll tell you a lot more about it there and share the course platform with you as well! Cheers! :)

can we export this model to ansys for simulation?

Hola! muchísimas gracias por aportar tu conocimiento, necesitaba esto hace mucho tiempo me has solucionado un problema!

@HowtoRhino

2 жыл бұрын

Hey Marcela, thanks for the comment, glad you found the tutorial helpful! If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! Please reach out and send me an email at dusan@howtorhino.com if you're interested and I'll tell you a lot more about it there and share the course platform with you as well! Cheers! :)

Interesting & informative tutorial - thanks! I wonder if this is how that facade was actually modelled..?

@HowtoRhino

4 жыл бұрын

I don't think it was modeled this way. It's probably manually modeled, but I wanted to share a quick way to get similar result.

how do you do it on a curve wall??

How do I do this using subd?

how to split each face to cut it ?

What external software are you using with Rhino? I noticed you had an additional pink bar of icons and commands that I do not have. Would I need to download a separate software? Thank you!

@HowtoRhino

4 жыл бұрын

These are plugins for Rhino, the "pink" one is called t-splines. However, it's not an active plugin for Rhino anymore :/

@MadeInHell_92

4 жыл бұрын

@@HowtoRhinoAnd how would it be done without this plugin?

@HowtoRhino

4 жыл бұрын

@@MadeInHell_92 SubD tools for Rhino 7, they can be found in Rhino WIP version, if you have Rhino 6 license, you can try this out. Works great!

@ricardoramos2789

3 жыл бұрын

@@MadeInHell_92 it can be done with normal surfaces too, just make a surface and serch for rebuild, then add the number of control points you whant the surface to have

@prasidhlavanya123

3 жыл бұрын

@@HowtoRhino how through subd can I get this?

Hi im trying to do the same on RHino 7 but i can't seem to follow your methods? Any alternative?

@Sirwanks4lot

3 ай бұрын

I'm a year late but just create the outline of your shape in top view then extrude it down in perspective view. Then use the cage edit command.

is it possible to do the randomization of control points in grasshopper?

@HowtoRhino

4 ай бұрын

This tutorial might help you: Triangulated CRINKLED Facade in Grasshopper kzread.info/dash/bejne/iGem1Lx7hMXYdNY.html

@davorpantoja8726

4 ай бұрын

@@HowtoRhino thank you !!

@HowtoRhino

4 ай бұрын

You’re welcome!

"Enter THIS MODE" yeah, thanks. Good idea, but why not to name things the way they are?