This overview of the PosiTest® AT Pull-Off Adhesion Tester explains the general operation and procedure of performing an adhesion test in conformity with ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others.
This updated video serves as a great overview to learn about:
• Features of the PosiTest AT-M Manual and PosiTest AT-A Automatic models
• Principles of operation
• How to perform an adhesion test
• Available stand-off options and accessories
• Software and reporting options
Learn more about the Positest AT Series here:
www.defelsko.com/positest-at
Chapters:
0:00 - Introduction - Why is adhesion testing necessary for QA and QC?
1:00 - How an adhesion test is performed with the PosiTest® AT
1:28 - Introduction to the PosiTest® AT-A and PosiTest® AT-M
2:03 - PosiTest® AT Kit - description and contents
2:38 - PosiTest® AT-M operational overview
2:58 - PosiTest® AT-A operational overview
3:48 - 20mm dolly kit description
4:06 - 50mm dolly kit descriptions (Includes the 50mm C1583 dolly kit)
4:22 - 50mm x 50mm Tile Kit for EN 12004-2
4:49 - Step 1 of the pull-off adhesion test procedure - prepare loading fixture and coating
5:06 - Step 2 of the pull-off adhesion test procedure - apply glue
5:20 - Step 3 of the pull-off adhesion test procedure - secure loading fixture to surface
5:49 - Step 4 of the pull-off adhesion test procedure - isolate test area (cut coating near fixture, if necessary)
6:11 - Step 5 of the pull-off adhesion test procedure - perform a pull-off test with the PosiTest AT-M
7:05 - Step 5 of the pull-off adhesion test procedure - perform a pull-off test with the PosiTest AT-A
7:38 - How to save readings into memory
7:59 - How to send readings to PosiSoft and create PDF reports
-Like us on Facebook:
/ defelsko
-Connect with us on LinkedIn:
/ defelsko
-Follow us on Twitter:
/ defelsko
-Visit our website:
www.defelsko.com/
#PosiTestAT #AdhesionTesting #DeFelsko #Coatinginspection