How to ME 7.5 /ME 7.1.1 immo off (how to awp immo off )
Автокөліктер мен көлік құралдары
how to immobilizer off me 7.x vag ecu
with ktag and eepromtool_04
eepromtool found on www.nefariousmotorsports.com/f...
link to software
github.com/turboat/eepromtool...
Пікірлер: 89
i just got ktag as well, just came in the mail yesterday lol. i got it to do med17 and edc17 immo off.. using the test clip is still the easiest for me7, med9 ,edc15/16 in my opinion but this is another way
worked, had to mess about with the c: directory but it worked. thank you.
@PolishFab
2 ай бұрын
how did you fix it?
working perfectly in ME 7.1
Great video I a newbie and have done a few hope you do more
Great video, thx
Thank you!
Hello Great video. Can you tell me the size of the 4x t15 cover bolts? Thank you for the help.
Cant wait to get my equipment in so i can get this beetle back in service
That's awesome! I need to EGR off on my '01 Jetta ALH 5-speed. I saw your programming vid. Does ECU need to be taken apart similar to this ECU?
@ERAutomotive
3 жыл бұрын
Hey no alh can be done in car through obd
I'm having some issues getting eeprom to work. I downloaded the github file but when i open the exe it doesn't create a directory--do i need to do that manually?
Dude your amazing and learning so much from you. Is this turning off your EGR? Also I noticed you said that’s a cheaper Ross tech cable. Can you feel me in the cheapest way to Ross tech VCDS?
@ERAutomotive
3 жыл бұрын
This is removing the immobilizer so u can plug the ecu into any 1.8t car It’s the blue kkl cable u can get from eBay or Amazon for cheap and then u use vcds lite with it Doesn’t have all the features but does some very useful stuff Or u can buy a lite version from them that does a little more
@hardcore4476
3 жыл бұрын
@@ERAutomotive so would you say half the features of vcds?
@ERAutomotive
3 жыл бұрын
Depends if u pay for lite activation or not
@hardcore4476
3 жыл бұрын
@@ERAutomotive Thanks for the info. I just bought that OBDELEVEN pro for android/IOS however doesn’t seem like it works like it does on iOS like originally suited android. Thinking about returning it as I don’t want to buy android anything for better operation… Think Im going return it and apply it to vcds.
@ERAutomotive
3 жыл бұрын
Vcds is definitely better IMO
I have k tag and use it well but I cannot find the software that you were able to use to change code on the eprom that you read with ktag? Can you help or if I send you the file can you shut immo off and send it back ?
Hola! Utilizas otro programa aparte del ktag?
Love you videos bro learn alot from them I got a edc16 been trying to remove immo I have ktag but not the bdm plate and kess and car prog and mpps could you do a video on edc16 or help me please lol dad put a 1.9tdi bls engine in his 2.0sdi caddy need to remove immo for ecu to work, or would it be possible to write a 1.9tdi file to a 2.0 sdi ecu?
@ERAutomotive
2 жыл бұрын
Hey thanks for the kind words U will need to get the bdm plate I’ll try to make a video tomorrow on doing it
Thanks for the help do you have a vid on how and what you used to make the obd2 connection if you don’t mind
@ERAutomotive
2 жыл бұрын
I just googled Obd2 pinout And Me7 pinout And make connections I got the connectors from scrap vehicles
@keiranpaterson4866
2 жыл бұрын
@@ERAutomotive perfect thank you
Very good video but I couldn't understand how you made the inmo off. What software did you use? Is too fast 😪
@ERAutomotive
2 жыл бұрын
Thank you! The software can be found on Nefmoto.com It was developed on that forum and is available for free
Have you found that clone to be stable? If so, which supplier did you get it from?
@ERAutomotive
Жыл бұрын
I haven’t had any issues I got it from alliexpress I’ve only used on older ecus tho
All I have is an mpps v16, tricore and a kkl cable. I want to be able to immo off for flash tuning of spare ecus for learning purposes. Would a Ktag and bdm frame be my best, also cheapest solution lol. Thanks for sharing your experience in these videos.
@ERAutomotive
Жыл бұрын
It can be done With kll but not reliable I’d suggest Ktag and u don’t need a frame for me7
@overlandmk4943
Жыл бұрын
@@ERAutomotive I just bought ktag, bdm frame with Bosch pcb connectors. I will be dealing with me7.5 as well as edc16u31 hence asking about the frame, I’m not trying to brick ecus as I’m a beginner which is why I’ve quickly chose to switch from Mpps flash to ktag. I’d rather put in the prep work for a better, more reliable result. Thanks for the quick reply
@ERAutomotive
Жыл бұрын
Good idea Ktag will serve you well for those ecu With ability to recover if needed
@overlandmk4943
Жыл бұрын
@@ERAutomotive also as to another one of your videos, can I check tdi timing, adjust IQ on vcds lite with my clone kkl cable? Supposed to help a friend out just wanting to make sure I have the right software/cable
@ERAutomotive
Жыл бұрын
I don’t believe lite can do that Unless it’s the full activated lite version
do you sell that cable that connects to the ECU?
@ERAutomotive
2 жыл бұрын
I don’t In video It’s a cheap kkl cable from eBay or Amazon Or u can use Ktag
Hi thanks for the videos the are very helpful, i have done a couple ME 7.5 ecus but when i try to do ME 7.1.1 i get a error using ept tool any idea how to get it to decode that EEPROM file? maybe a command line is different for that ecu?
@ERAutomotive
2 жыл бұрын
Some me7.1.1 don’t read the eeprom If u look at the file in a hex editor it will be all FF What I do for those is just a clip on reader for those
@cryptodoge5355
2 жыл бұрын
@@ERAutomotive clip on reader? can you explain further is this something i can buy?
@ERAutomotive
2 жыл бұрын
Yes u can buy I use carprog But there is lots of other options www.amazon.ca/SOIC8-EEPROM-CH341A-Programmer-Module/dp/B07LH72MR5 That’s just an example I don’t have that one Just so u get the idea of what I mean
@cryptodoge5355
2 жыл бұрын
@@ERAutomotive okay thanks! could i get your email for some further questions? im looking for the right software to use to read the eeprom file with a clip on reader.
@ERAutomotive
2 жыл бұрын
erauto.vw@gmail.com
Hello! Do i have to ground booth points or just one point? Only The yellow one for exempel
@ERAutomotive
2 жыл бұрын
Are you using Ktag? And me7.5 or me7.1.1?
@ERAutomotive
2 жыл бұрын
Are you using Ktag? And me7.5 or me7.1.1?
@Dipzitmusic
2 жыл бұрын
Hello again! I finally get it to work! Thx for this video 😍
@ERAutomotive
2 жыл бұрын
Excellent!
Does this require going into the hex data?
@ERAutomotive
2 жыл бұрын
The software does the required changes for you. But yes technically it does
Hi have you got a link for ktag theres loads on ali express but not sure which too go for
@ERAutomotive
2 жыл бұрын
The newest red pcb is what I got
@ERAutomotive
2 жыл бұрын
Yes looks like it Will just need Ksuite 2.25 for it to work
How much do you charge to do this.
@ERAutomotive
2 жыл бұрын
Can u contact me on Instagram @eruatomotive_ Or email me erauto.vw@gmail.com
Got a flashing IMO yellow light will this get rid of that also?
@ERAutomotive
3 жыл бұрын
Cluster hold immo data as well This just makes ecu plug and play For swaps or ecu replacement I just open cluster and break the bulb
@kevinwatson5714
3 жыл бұрын
Lol I hear that, needed another key programmed. Took it to lock smith then this started. Smh
@ERAutomotive
3 жыл бұрын
Oh dam
@rudygiraud3508
2 жыл бұрын
@@ERAutomotive don't need break bulb , you need to match a key with the cluster
@ERAutomotive
2 жыл бұрын
If u can program key y not just program key from the start and not need immo off on ecu ??@Rudi Giraud
Would I be able to do this with mpps v18?
@ERAutomotive
2 жыл бұрын
Yes I believe so Go in generic and the option is there
@ericlabine3264
2 жыл бұрын
I seem to be having trouble getting the ecu into boot mode? Any tips
@ERAutomotive
2 жыл бұрын
Connect boot pin power on count To 10 remove boot pin
@ericlabine3264
2 жыл бұрын
@@ERAutomotive tried this also tried powering the ecu without pin 3 with pin 24 grounded then connected pin 3 while grounding 24, removing ground from 24 and still nothing,
@ERAutomotive
2 жыл бұрын
The boot pin is inside the ecu Have to open it and touch the pin inside on the board
Helo sir can you help me
@carremotekeybd8219
2 жыл бұрын
Please give you Whatsapp number
@ERAutomotive
2 жыл бұрын
You can email me at erauto.vw@gmail.com
Nice day. I made immo off a jetta mk5 2008. To start the car that I have to disconnect in the instrument panel, in the ECu or in another module?. Please my jetta won't start.
@ERAutomotive
Жыл бұрын
Immo off ecu and will start with just Ecu
That's really cool stuff, have you tried this on a edc16u34? In BDM?! Greetz
@ERAutomotive
2 жыл бұрын
Yes I have a video on immo off for edc16 I’ve only done it on the vag ecu tho
@christophwalter9259
2 жыл бұрын
@@ERAutomotive oh nice, thank you I'll be watching there