I had no idea is was possible! So intriguing.

Thank you for the turtorial!!! So freaking cool!

Kya jabardast quality ka video banaya hai aur lecture bhi itna mast diya ki sab kuchh samajh me aa gya

You are really great.... fantastic and informative video

kollallo paripadi,onnu undakki nokkanam,good video

is the writing transferred to the resin polymer due to light reaction with dark and white areas on the print ?or something else?

That’s pretty cool

Very useful and interesting.... good video👍🏻

@CforCreation

3 жыл бұрын

Thanks a lot

ഇതു കൊള്ളാലോ, ആദ്യായിട്ട കാണുന്നെ

Hi What is the thingy made of please

Good work 100% real

If i logo print by Epson L130 Inktank Printer, work it????

Very useful information .....

If there is less sunlight like foggy in that case what to do ?

From where to buy polymer liquid or gel?

Nice job perfect

Useful.. Nice

Bonjour,votre tuto est super mais je n’arrive pas savoir quel liquide vous utilisez,pouvez vous m’aider svp ,merci beaucoup 😊

Super Se Upar Bro.Keep It Up.

Amazing 👍👍👍keep it up🎉🎉

kidu kidu....

Wow 😮

Mashallah........ good work

Good morning Sir, Could you help me please i did everything the same but the letters are not bold, i think i should increase the space between individual letters, what number(points) do you use to space each letters during editing(Illustrator)? or any idea why? Thank you, God bless you!

How much heat it requires and how much time

Oh, my God, great, good luck.

Wonderful

thank you brother

Very good👍

Hello brother i also tried but name is not coming on photo polymer gel ??

Use full video thanks for share

@CforCreation

3 жыл бұрын

So nice of you

Do we have to take printout of logo as it is or after mirror imaging...bcoz some have shown as it is and some have shown after mirror imaging...plz explain the difference and is something extra needed if we take printout on tracing paper as it is...?

👏👏

What is the recqument goods ?

Useful video 👌👌

@CforCreation

3 жыл бұрын

Glad you liked it

Good video

WOOWWW

Sunlight temperature abi 27° hai abi....kitne time tak me sunlight me rakhu ye polymer stamp ab?

Sun light me kitna time rakhna hai

useful video

Thanks for the video I'm wondering if I can use regular uv resin. If I can't what is the name of the polymer used

@CforCreation

2 жыл бұрын

Photo polymer

Please suggest how much time keep in sunlight not work in 15 sec

💛💛

Useful video

@CforCreation

3 жыл бұрын

Glad you liked it

👍🏻👍🏻👍🏻

Çok yaşa be kardeşim.. ❤😂🎉

Super video

@CforCreation

3 жыл бұрын

Thanks

Which cello tape you use for stamp making

@CforCreation

3 жыл бұрын

normal clear tape

White board kiska hai

Nice video

what about uv resin?

Good

Good job

@CforCreation

3 жыл бұрын

Thanks

Sir sunlight m kitne time tak rakhna hai

how did happen it embose in that polymer rubber,,, if what you did is you just print your design in a clear sheet? im curious man

@CforCreation

2 жыл бұрын

Trasfer the printed stencil to polymer using sun light

السلام عافاك ما اسم المادة في القرعة السوداء بالدارجة الله يحفظك

How can I order the instruments?

Usefull

@CforCreation

3 жыл бұрын

Glad to hear that

Can we use paper for print instead of transparent film to get desired results

@CforCreation

Жыл бұрын

NO

Great idea, but the links in your description do not show the the kit you used to make the stamp!!

@sebeek00

Жыл бұрын

That's the point, he's selling the stamp holders. 😃😃

Liquid polymer evdenna vangikan kitta

What should be glass mm

Where to buy polymer plate?

Is it possible to use the microwave instead of the sun

@ciocoflender007

3 жыл бұрын

Hahahahahahahahahahahahahahahahahaha

Thank you. Where do I purchase the gel?

@abbs_33

2 жыл бұрын

Online photo polymer

placed between acrylic or glass?

@CforCreation

2 жыл бұрын

Glass,acrylic also work

Can u make inverted curved triangle stamp?

It's work but know about how much time keep in sunlight

@CforCreation

Жыл бұрын

it depends on sunlight, adjust timing 2 or 3 timed then u will understand

Please send me photo polymer liquid purchase links

It's chemical and liquid names,which shop get to purchase.Thanks for video.

stamp to sahi se ban raha hai par rubber hard nahi ho raha hai bar bar chipak raha hai mujhe aapse aur suggestion lene hai apko contact kaise karana hai

Why do you use a polymer sheet and polymer liquid together? Nice video.

@CforCreation

3 жыл бұрын

Liquid only used,that one plain clear sheet to hold polymer

@mauimorgan9757

3 жыл бұрын

@@CforCreation Thanks :)

How did it become 3D printed...first it was on the paper which is 2D and then it.turned into a 3D...how???

@CforCreation

2 жыл бұрын

Using polymer liquid

How is that the white part stays intact whereas the black part goes away..does the polymer corresponding to the black part melt down...how does it disappear by UV rays?....Can u plz explain the underlying principle?

@CforCreation

2 жыл бұрын

Uv light not pass through black part,so that area gose away

@christoffer4862

Жыл бұрын

I am still looking for the exact material but I think UV-light hardens the polymer resin, so unexposed parts can easily be brushed away. As a final step the entire plate should be exposed to light again so everything hardens.

Yaar liquid ka kya naam hai

Bro i did the same things but couldn't get the results Exposing in sunlight for 1-1mints both side respectively it did not exposed well means the whole polymer was as normal. When I did it 2-2 mints respectively for both sides the whole liquid got harder and was unable to get my exposed stam out Kindly suggest me the right way thanks 🎉

@CforCreation

2 жыл бұрын

Change timing,print side give 1.3 min Otherside 1min,means u will ad just timing, its depending on sunlight

@DeveshKumar-op3jx

2 жыл бұрын

@@CforCreation print side means back side of the tracing paper or the front side where subtract sheet (transparent sheet )for stamp is added. Considering to ur comment I did the same but half matter was exposed and rest remains in the panel.

@CforCreation

2 жыл бұрын

@@DeveshKumar-op3jx LESS TIME EXPOSED,INCREASE TIMING

@DeveshKumar-op3jx

2 жыл бұрын

@@CforCreation ok thnq so much brother I did my work very well Thankyou again

@atulchouksey9252

2 жыл бұрын

@@DeveshKumar-op3jx i am not able to get it after 5 minutes also what i am doing wrong

how much.

bhai aapne jo ise pre ink type stamp banaya hai. kya hm same process se stamp pad type matlb normal polymer type ka stamp bana sakte hai kya. please reply me. thanks

@CforCreation

3 жыл бұрын

yes

Please share the eliments name

Which software are you using for this stamp designing.Please upload video on various stamp design-round, square and oval shapes along with their sizes.

@CforCreation

3 жыл бұрын

adobe illustrator

@gunnardavid8427

2 жыл бұрын

I know Im randomly asking but does someone know a tool to get back into an Instagram account? I was dumb lost my account password. I would love any assistance you can offer me!

@zahirzavier1780

2 жыл бұрын

@Gunnar David instablaster ;)

@gunnardavid8427

2 жыл бұрын

@Zahir Zavier I really appreciate your reply. I got to the site through google and im trying it out now. Takes a while so I will reply here later with my results.

@gunnardavid8427

2 жыл бұрын

@Zahir Zavier It worked and I actually got access to my account again. Im so happy:D Thanks so much, you really help me out :D

What type of printer you used?

@CforCreation

2 жыл бұрын

Hp

which printer u use plz

@CforCreation

3 жыл бұрын

Hp laserjet

😊

Can 100 watt incandescent light bulbs be used instead of sunlight?

@satyastamp6338

2 жыл бұрын

Good

@satyastamp6338

2 жыл бұрын

Ho jayega I make

Now ehre to get that photo polymer 🤔

Can i use 🔥 instead of 🌞

@CforCreation

2 жыл бұрын

No

Make one for me .

Great video ! Would you be able to gather some tools unavailable locally and sell/ship them to me in Canada ?

सर स्टेम्प एक्सपोंज होने के बाद कोनसा केमिकल से साफ किया है हमें?

@CforCreation

2 жыл бұрын

Soap water

कौनसा लिक्युईड धोया /साफ किया है बताया नही।

How thick must the glass be

@CforCreation

3 жыл бұрын

5mm

@anthonydecoteau6644

2 жыл бұрын

Thank u . You are amazingly helpful. Thanks sooooo much. Please is it possible to give a listing of all items needed, tyes of printer needed ink jet or laser and most of all can you have a zoom teaching class

Yeah sheet kaha milati hai

@himanshuverma8403

2 жыл бұрын

Chemical kahan Milta Hai aur iska kya naam hai

Hello, is there a specific viscosity or concentration that we should use for the photopolymer liquid. I am checking here in Canada and there are no results for Photopolymer liquid. All I see here is printer resin and photopolymer resin and they all have some numbers on them

@CforCreation

2 жыл бұрын

In india almost people doing this using sunlight,just want make sure exposing time

@roshannazareth3461

2 жыл бұрын

use the photopolymer resin..... Its the same(the same called as liquid) the numbers like 40/50are hardness indicators. 50 will do great stamps.

@mehnoork2276

2 жыл бұрын

I m from Canada as well and haven't been able to find this liquid. Did you have any luck?

@heather1272

2 жыл бұрын

@@mehnoork2276 I'm thinking it's called uv resin here. You'd want the soft, it's flexible.

@rojaniearienza7392

Жыл бұрын

​@@roshannazareth3461 40ml polymer and 50lm hardener?

Which printer is used for printing can we use ink printer epson l3110

@CforCreation

2 жыл бұрын

Any laser jet print ok

Best....& back groundmusic

Bro enikoru stamp undakanam help cheyamo?

@CforCreation

11 ай бұрын

EvideYanu

Plz...🙏

Polymer liquid name plz.....?

@CforCreation

3 жыл бұрын

Name is polymer liquid

@lifeofpi3464

2 жыл бұрын

@@CforCreation ആ liqud എവിടുന്ന വാങ്ങുന്നത്.. ലിങ്ക് തരുമോ ?

Bruh oru stamp undakkan help cheyyamo??

@_a286

18 күн бұрын

Mobile number oo email oo tharamo?

Does it realy work ?

@CforCreation

3 жыл бұрын

Yes

@PRATHMESH_KALASE_07

2 жыл бұрын

@@CforCreation Not worked for me