Shout out to Ellumacent Souls TCG for inspiring this vid, he has a slightly different method for his foil cards which also gives a different finish so check out his tutorial too! kzread.info/dash/bejne/hJONvNh_o9bRj9I.html

@kevinevanks61

3 жыл бұрын

Bro!!!! Your cards look so sick! They look like 10× better now that you got them foiled. I'm also tryinna make some cards myself but don't know where to start, cuz all cards are hand drawn directly on the card, even the Borders

@maxiestevens6675

3 жыл бұрын

Excellent job.❤

@hash-tag-aecg7087

3 жыл бұрын

And why can't game crafter do this again?

Hey mate, I've been creating custom cards for around 9 years now - you're almost there. It's much better to use a spray adhesive for this as the bond will be better and it dries clear. Also invest in a corner cutter (unless you want to keep the square edges). Keep up the good work buddy!

@jamesmartinez2235

2 жыл бұрын

What do I need as far as printer and system to make my own playing cards? I'm just starting out. Thank you very much!

@GGGmod1

2 жыл бұрын

Hey how do i make it so only a certain part of the card is foil and not the enitrety. Say for an mtg card only the symbol at the inferior part and the image itself in the frame would be foil? how do i achieve that? Do i need to print on top of the foil directly?

@onlyarandomguy

2 жыл бұрын

@@GGGmod1 use white acrylic marker or any white ink to cover the area that you don't want to be foil

@GGGmod1

2 жыл бұрын

@@paper64ink God dammit mr paper u know how scary it is to get a " i know who you are" in notifications?

@LScentral

2 жыл бұрын

How much do you charge

as a fellow printer, i can tell you that you can print on clear decal paper and stick it on the foil, ez and no stick of glue involve :))) also if you can just print directly on the foil with oil printer then slab a clear decal on top is the best

This isn't exactly what I was looking for, but you gave me the information I needed to figure out my project. Thanks! And best of luck with your TCG!

@hajisaiku

4 ай бұрын

See, I'm trying to make my own amiibo card, and this gives me an idea of how to do these two ways was 1. to print the part of the image I want holo then place the foil after then print the rest on another sticker them layer and lamanet 2. Do the same process, but this is more like Pokémon foil the print section, then print the rest on top, but to protect it, lamanet it or shrink wrap it😅

YOOOOOOOOOOOO I REMEMBER WATCHING YOUR FIRST HOW TO MAKE CARDS VID THIS IS POG

@ChaosGalaxyTCG

3 жыл бұрын

that was a loooong time ago, thanks for sticking with the channel!

Perfect timing, I started making my TCG about a week ago and now youre making more tutorials!

Man, this is gold. Very interesting stuff from a diy/creator like me. Thumbs up!

This turned out pretty great for me. Only complaints I have are 1: the drying time of the acetate takes at least a day. (At least for the acetate I used, however it wasn’t meant to be printed so maybe that’s why) and 2: the holographic backing will even shine through a full black card, so if you’d like only a certain section to be holographic, I’d recommend gluing your print on regular card stock and either cutting out a section for the holographic backing or just putting a holographic sticker overtop. Regardless tho, pretty happy with my cards. Ty bro

@WVGameCast

8 ай бұрын

/

@TheL0ners

6 ай бұрын

so what would you use for the film that you don’t want hologramed?

Found the most incredible 1:1 Poke/Yugioh producer out there that started out from a similar method. Happy to point anybody in that direction!

@Flappymermaid

2 ай бұрын

plz

@GiLeo

20 күн бұрын

Me

Unbelievable. This made my cards look incredible. Thanx for the tips bro

Doesn’t the print rub off since you print on top of the film? Maybe flip the artwork before printing and then stick the printed side where the ink is onto the holo card?

Seriously considering this for my business cards! I’m a UAS major and I graduate next year, I might just need to do this!

Wow this real cool thanks so much i did this some years ago with custom pokemon cards but the glue looked terrible, but after watcing this I really wanna try this again

Thanks, I'm making my own card game and this helps a lot.

thats insanely good. its like a rare card. thank u! this will work for my trading card series xD

Get some bling in your card games!

@qwebostudios6485

3 жыл бұрын

if there’s any spots left i wanna play in you my chaipion ship with the cards

@ChaosGalaxyTCG

3 жыл бұрын

@@qwebostudios6485 yes there are about 10 spots left right now! challonge.com/8w1hteks here's the link to the sign up page!

@vincenthaynes3603

3 жыл бұрын

Me: opens bling pack What's inside: Silver bomb head Silver floppy disks Gold zombie jet head Gold raincloud Royal fume head Pack cost: 30000 coins

@memelordmog8071

3 жыл бұрын

AYYY LETS GO

@jerrysmith8624

3 жыл бұрын

Use if solid gold bricks is cooler but this is neat

These look better then the ones I got professionally printed, awesome job mate!

This tutorial has been extremely helpful

Really cool, definitely want to try this with some art, thanks!

I’m making a card game based on the artists I work with. It’s actually really playable ironically

WHOA, I really need this! THANKS

finally u finally did I needed this so bad for my TCG

These are super awesome! Ty for the tutorial I gave a follow

man love your work! props!

this is amazing love your work man ...

this needs more views, good lordy! thanks for the tips!

Nice work man, that's super cool.

thank you for an actually good tutorial (:

You have the exact same printer I do. Love the thing because I can refil the cartridges without it freaking out on me.

I was just thinking when you mentioned the glue issue with it needing to be on the inked area. I was thinking have you tried a spray adhesive. There’s many that dry clear so you could spray the shiny card, apply the acetate and then use a roller to smooth out and push air bubbles out.

Really useful :) thanks

Where did you find the sheet to print on your artwork to make your trading card and the foil sheet as well?

How does one get holographic stars or circles on top of foil similar to holographic pokemon cards?

You know whats funny the fact that I actually was wondering if there was a way i could do this at home and then bam! This video appears on my home page

can you use a clear, heat-activated adhesive sheet for this?

Which kind of adhesive are you using?

Hello what printer did you use and what paper ty

Just a curious question, with foil Poker cards available through game crafter, will you ever do foil cards in main/side sets for Chaos Galaxy??

GORGEOUS Thank you

What foil did you use? Can you recommend something on Amazon? I tried this but the foil I bought was garbage so the backgrounds just look white. Thanks!!

To fit 10 cards on an A4 page turn the page landscape instead

Have you tried clear sticker paper for inkjet printers instead of the glue stick?

these are very impressive! any advice for how to apply this for magic the gathering custom cards? just print as usual?

Not sure where they would sell it in the UK but, double sided contact paper works perfectly.

Is there a way you could possibly put it onto card stock?

Thanks for the awesome tutorial!

@ChaosGalaxyTCG

3 жыл бұрын

No worries!

What type of paper do you use to print on

Where can I find this holo foil paper and how sturdy is it without putting a protective cover? What's the paper thickness?

Hi I like your work and I'm interested in knowing how to make holographic stickers. What do I need to start making them. And type of material

Just a little tip, assuming you're allowed to spray adhesive makes sticking them down a tonne easier (if you do it properly you can spray the whole card for a better stick but it doesn't show through once dry) the stuffs just pricey and you 100% need to spray outside

@dylansheaves4743

3 жыл бұрын

Oh and it's in the same catagory as spray paint so y'know not everyone is allowed to buy and use it

@ChaosGalaxyTCG

3 жыл бұрын

I did actually try this previously! at the opening of the video the cards ‘Teklar’ and ‘Talakon’ were previously made using spray mount glue but I wouldnt really recommend it as it makes the foil come out patchy!!

@CADOIP

Жыл бұрын

It does not come out clear I tried and it’s super cloudy and spotty even spraying a super minimal amount

How many layers are needed to make a good steady card?

I use Pages to make my cards too!

do you need a specific type of printer to print them out with

Do you have any videos for creating nice packaging?

U would love to figure a way to print the backs of the cards

Hey Zack, I've been really hard at work on my TCG and I think I'm nearing the end of Set 1. I'm gunna create a channel for it and upload some stuff there. My Chaos Galaxy booster packs have arrived and the first video on the channel will probably be a pack opening of the booster packs. Loved the video btw!

@ChaosGalaxyTCG

3 жыл бұрын

hey, thats great to hear, good luck with finalising the set! Thats great to hear too, let me know when the video is up would love to check it out!

@khemistree

3 жыл бұрын

@@ChaosGalaxyTCG Yeah will do! I'll be filming it this weekend hopefully! And thanks, I'd love to properly discuss my TCG with you at some point, since you are my inspiration for making it

@omegarayquaza7584

2 жыл бұрын

@khemistree 😐 so uh wheres the vids 😑

Wait what if the card doesn't have any transparenent places like a Pokemon energy card, does the foil still show up

What is the paper name that you use for card making

What printer do you use

Can you provide the link of where you buy the holographic cards? Cant find any suitable ones in North America. THanks

How would you put your phone’s picture into your computer?

Can you laminate them after?

Would you mind posting links? I'm having difficulty finding anything comparable to what you are using here. Any help would be appreciated

Yeah great idea it would be like the pokemon cards so you will know its rare:)

Big thanks! Also, contour make vid on how to mass produce cards cause I’m trying to make my own card game but one thing I’m really struggling with is actually printing. Thanks again

Nice!

Cannot find that holographic paper on Amazon, only holographic adhesive paper.

hi, im having some trouble finding the card foil, does someone know where i could find it ?

The cards look awesome

@ChaosGalaxyTCG

3 жыл бұрын

thanks!!

Wowww these look niceeeee

thank you.

Hey chaos, I was just wondering. Where can I buy the holographic foil card because I can not find it anywhere online? Could you please help me?

Is the ink side exposed? If you mirrored the image, you could have the ink layer inside the sandwich of layers. Then just use spray adhesive like dannybizal suggested on the holographic film and place together. Great video though I might try this.

Really Cool!!!

I would love to know what kind of printer you're using. What's the model number? I may have missed it. I might just need to watch this video from the start (without being distracted).

YAAS

Omg yes finally

That is berry cool.

Where can I get the foil?

yo this is sick!

AWSOME

Lol and here I though u needed some industrial printer or something. Also didn't knew you could actually print stuff in plastic sheets like that. Anywya thank you.

mmm, could you flip them when printing them in order for the ink to be in the size that is glued, so that i has double protection againstt scratches?

@ChaosGalaxyTCG

3 жыл бұрын

thats actually a really good idea, i didnt think of that at the time but will defo do it next time!

@angelcm156

3 жыл бұрын

@@ChaosGalaxyTCG yeah, I've made some test runs at home hehe tough here in Mexico is kind of hard to find the holo card board, but still one does what one can, pd. Good videos keep the good work

@laurenrocco

2 жыл бұрын

I’ve never made cards like this, but as a sticker maker, I’m wondering if it would help “seal” your card and strengthen the adhesive bond if you ran it through a low heat laminator. Don’t laminate it, but sandwich it between two pieces of paper.

can i get the link to the foil card thanks

Would you mind giving some details on the holo foil paper? I don't think I've seen such stuff before. (I live in europe, maybe thats a reason?) Anyways good video!

Thank you much! Is there a Video how you make your Boosters? Do you have a Printer Company do the Job? Planing myself a TCG.

@koolkid2342

3 жыл бұрын

He has the website Thegamecrafter make the cards. I suggest them highly

Cool

what is the name of that printer?

U r a card genius

what type of Printer you use to print those cards?

@ChaosGalaxyTCG

Жыл бұрын

Just a standard home printer! Mine is a canon IP8750 but any home printer that isn’t really old should be fine to use!

I'm making a card game called destructive dimensions

This is coooool

Can somebody please link the holo paper he used ?

What holographic sheet do you use?

@SynoAuRi

2 жыл бұрын

there's a bunch on amazon for good prices

@loganmanning1553

2 жыл бұрын

@@SynoAuRi any size thickness recommended? A link to what was used would be helpful

Nice.

Zack making this video: and then the big bucks roll in

whoa!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

does the game crafter support foil/holos?

Can you show to us how make Golden foil main text like Yugioh?

The holographics look nothing like holographic pokemon cards though. How would you recreate something like the shiny charizard VMAX card?

@LScentral

2 жыл бұрын

I say experiment