If you want the best fishing tips, spots, and strategies, plus exclusive discounts on fishing gear you’re probably already buying, click here to join us in the Insider Club: bit.ly/3Fcjj1L

A hint is to use blue painters tape to wrap around the boards between each hole to help hold them to gather while you’re drilling. Great looking rack.

@Saltstrong

2 жыл бұрын

Great tip!

great project !...like the simplicity of the rod rack

Great job!!! I should try this 🧐🤓

Thx from the Netherlands!!!! B&B Fishing will be launched quick.. i will send you a photo of our rack!!

@Saltstrong

10 ай бұрын

Glad we could help!

Hey Luke. Great instructional video! I thought of an easier way to cut the 1 3/4” holes. Instead of buying two 1x3s, buy an extra 1x6, draw a line lengthwise down the center, mark and drill the holes where you want them, then cut the 1x6 down the line and you have your two 1x3s. Worked for me.

Nice DIY rod rack

Cool video man. Just stumbles across your channel now. Something nice you can make in an afternoon and of course great storage for your prize rods ✌😁👍

@Saltstrong

2 жыл бұрын

We're glad that you found the video helpful! 💪 We appreciate the support!

Thanks! Love the video and all the details. I’m going to try making one this winter!

@Saltstrong

6 ай бұрын

Thanks so much!

That wuz awesome. Im definitely gonna make one

@Saltstrong

2 жыл бұрын

Thanks! Hope you have fun making your rod rack.

Great job Luke !!!

@Saltstrong

2 жыл бұрын

Thanks Pablo!

Now this is somewhat what I would love to see more of.

@Saltstrong

2 жыл бұрын

Glad to see that you enjoyed this video

Thanks I have made my diyrod rackthanks to your channel

@Saltstrong

2 жыл бұрын

How cool! So glad to see that you made a rod rack.

Nicely done been looking to make a custom rod holder

@Saltstrong

2 жыл бұрын

Thanks!

Good job man!

@Saltstrong

Жыл бұрын

Thanks!

I built one of these a couple years ago, it’s not the best. I’m probably going to build one more like this, because if I give my rack any type of movement half the rods fall. Worked great in a garage closet but no in my bedroom haha

Felt strips glued into half circles (especialy the uppers) would soften the contact point. Posted that half way through before Luke mentioned it. I like his take on it.

@Saltstrong

2 жыл бұрын

Thanks for making time to post the helpful comment!

@curtsmith5457

2 жыл бұрын

Where did you find the felt?

Not bad I like it.

@Saltstrong

2 жыл бұрын

Thanks!

nice 👍

@Saltstrong

4 ай бұрын

Thanks for watching!

Can I use a 2” hole or does that matter?

I would love to know the angle for the base. Spacing etc. But I would like to say that if you have a table saw this could be a bit easier. instead of 1x3 gat a 1x6 cut your holes and then rip it in half. Either way job well done sir.

I wasn't able to download the pattern for your rod holder. Would you be able to email it to me please or send me a link to be able to do so. Thank You in advance and I appreciate you doing this for people like myself

Hey Luke. I’ve been wanting to make that exact rack. Where can I find the PDF that you mentioned?

@Saltstrong

2 жыл бұрын

The PDF is linked in the main article for this video on our website... here's a link: www.saltstrong.com/articles/diy-rod-rack/

I can't print the PDF, what are the measurements on the holes. It would help if you added the measurements on the PDF

Use a 1x6. Drill holes the. Rip board in half. Much easier.

@Saltstrong

9 ай бұрын

Good advice thanks!

Nice!! Where’s the template? Thank you, I have so many rods I need organization lol

@Saltstrong

2 жыл бұрын

The PDF hole guide template is linked in the main article for this video on our website... here's a link: www.saltstrong.com/articles/diy-rod-rack/

Put one of those little 2 hole metal plates on the end , screw it on each end and the boards won't move

wouldn't it had been easier to use a 1x6 drill the holes and then rip it down the middle on a table saw? nice rod rack though

@Saltstrong

2 жыл бұрын

Yes... I just don't have a table saw so this was the low-cost route.

@thomaslewis1781

2 жыл бұрын

@@Saltstrong thankfully I do. I think I am going to build 2 or 3 of these. Thanks for the great video and wonderful idea.

You could stain it or paint some fishes on the wood.

Where is the template located?

@Saltstrong

2 жыл бұрын

The PDF template is linked in the main article for this video on our website... here's a link: www.saltstrong.com/articles/diy-rod-rack/

It's excellent U stole my idea

Needed some clamps

@Saltstrong

10 ай бұрын

Could be added!

Is it bad to store my rods in a shed?

@Saltstrong

2 жыл бұрын

We recommend storing rods in temperature controlled environments to maximize their lifespan (especially if you live near saltwater).

dont have the tools for something like this. what I did was buy a 50pack of this little plastic grommets and screwed a couple into the stud in the wall. fishing poles clip right in to them.

@Saltstrong

2 жыл бұрын

Cool idea!

There's no template attached to your instructions.

@Saltstrong

2 жыл бұрын

The PDF hole guide template is linked in the main article for this video on our website... here's a link: www.saltstrong.com/articles/diy-rod-rack/

Didn’t see a pdf file?

@Saltstrong

2 жыл бұрын

The pdf file is available in our private insider community on the same fishing tips video post at www.saltstrong.com 💪

Looks like you need to build another 10 racks!

@Saltstrong

2 жыл бұрын

Haha!

C clamps

Poor carpentry skills 😂

𝓢𝓱𝓾𝓽 𝓾𝓹

@Saltstrong

6 ай бұрын

Appreciate the comment and you watching!