How to make up a new WC cistern before fitting.
Тәжірибелік нұсқаулар және стиль
The bag of parts with a new cistern can be quite daunting. Here is how to assemble a push button one.
Visit Al`s plumbing shop for parts at www.amazon.co.uk/shop/dereton33
Saved some money on calling a plumber? Donate here, thanks Al. www.dereton33.com/page118.html
Пікірлер: 134
Another brilliant explanation. You deserve an honorary teaching degree!
@dereton33
2 жыл бұрын
Wow, thank you! Cheers Matthew.
@Nora.........
4 ай бұрын
I agree, an absolute natural. Your time and instruction is so appreciated. X
Simplicity itself - brilliantly explained. Thank you!
@dereton33
2 жыл бұрын
You're welcome!
A very useful confidence builder. Cheers from Scotland...
@dereton33
2 жыл бұрын
Thanks 👍
Gentle and steady - what a kind voice - many thanks my cistern in on!
@dereton33
2 жыл бұрын
No problem.
Extremely well explained, the gentleman made a fairly simple job even simpler. Thank you.😊
@dereton33
Жыл бұрын
You're very welcome!
What's a Stud!!!! Straight to the point explained brilliantly 👏
@dereton33
Жыл бұрын
Thanks. Dont know about the stud though ha ha.
I'm replacing my old toilet this week, this is a great help. Thank you for this.
@dereton33
Жыл бұрын
You're welcome!
Thank you so much for sharing! Your video has made things a lot easier for me.
@dereton33
Жыл бұрын
No problem Gabriel.
Great video as always Al 🌟. Looking forward to seeing the next one.🔥
@dereton33
3 жыл бұрын
Thanks 👍
You are a life saver, just following your instructions tonight for my toilet and you made it real easy for me. Thank you! 🍺
@dereton33
Жыл бұрын
Great to hear!
Thank you so much for showing us how to assemble the system in a very simple way. The instructions that come with the tank are very complicated and hard to understand as they are translated into english. The only problem I encountered when I followed your demonstration video was that the plastic bolts you fastened on the tank have to be tightened with the plastic nuts under the toilet seat instead to make sure there is no leak when one flushes. I learnt that after assembling everything as shown in your video, however I quickly started all over and fastened the plastic bolts under the toilet seat and not under the cistern tank as shown. That immediately solved the problem. This was my first time installing a cistern tank. Thank you again for how you explain things so clearly.
@dereton33
Жыл бұрын
No problem Annie.
@anniebrown363
Жыл бұрын
@@dereton33 Thank you for your prompt response 👍
This video was very helpful to me. Thank you.
@dereton33
2 жыл бұрын
Glad it was helpful!
I remember I was determined to fit my own bathroom suite many, many years ago. So I booked myself on a ten week basic plumbing course at the local college. Once I had fitted all the cistern parts I sat it in the bath filled it with water to test just to be sure as a newby to plumbing would.
@dereton33
3 жыл бұрын
I guess you never looked back, ha ha.
Thanks for the advice. I was about to give up!
@dereton33
2 жыл бұрын
No worries!
Amazing , clear, my parts all looked exactly the same, this saved me loads of time and made me more confident, much appreciated !!!
@dereton33
2 жыл бұрын
You're welcome!
Just what I was looking for,thanks.
@dereton33
10 ай бұрын
No problem!
What a lovely chap.thank you.👍
@dereton33
Жыл бұрын
Very welcome
Thanks, great tutorial, followed easily. Should I have 2 extre plastic wing nuts and washers to connect to pan or use the 2 shown.
@dereton33
Жыл бұрын
Just the ones shown.
Great video, this has helped me a great deal 👌🏽
@dereton33
Жыл бұрын
No problem 👍
Exactly my installation thanks mate!
@dereton33
Жыл бұрын
No problem 👍
Very helpful video!!! Thanks
@dereton33
5 ай бұрын
No problem.
That’s very helpful! Thank you!
@dereton33
Жыл бұрын
No problem.
Great help. Thanks.
@dereton33
2 жыл бұрын
No problem
So helpful, thank you.
@dereton33
2 жыл бұрын
Glad it was helpful!
Thank you. Very helpful.
@dereton33
2 жыл бұрын
You're welcome!
Only true plumbers will know the feeling when you get the fill valve out and notice the plastic thread! 😭 proper bum clencher when it comes to connecting it. Great video as always Al! Marc 👍
@dereton33
3 жыл бұрын
Thanks Marc.
Excellent video 🎉
@dereton33
9 ай бұрын
Thank you very much!
Great video. Thank you!!
@dereton33
2 жыл бұрын
No problem Alex.
Hi mate great videos thanks alot and God bless you thanks
@dereton33
3 жыл бұрын
Thanks 👍
Just had the same job in my downstairs bathroom , the first thing I got rid off were the pathetic plastic mounting bolts and popped down to screwfix to get some proper ones
@dereton33
3 жыл бұрын
A good idea.
Very useful. Thanks
@dereton33
2 ай бұрын
You are welcome
thank you very interesting video
@dereton33
3 жыл бұрын
Glad you enjoyed it
Brilliant thankyou .I'm doing one with the sink on top in the next few days . 1 question. Do you never bother with silicone on all the inside rubber washer's as well? Thanks
@dereton33
2 жыл бұрын
No need
Thank you
@dereton33
9 ай бұрын
You're welcome
You are a legend. Thankyou👍
@dereton33
Жыл бұрын
No problem 👍
Nice one. Reassured me that I was doing the right thing. Would you use sealant as an added safeguard to leaking joins
@dereton33
Жыл бұрын
No I prefer plumbers mait.
Thanks mate
@dereton33
Жыл бұрын
Any time!
Nice One !!!
@dereton33
3 жыл бұрын
Thanks ✌️
Quick question Al, how do we adjust the siphon for a longer flush? Thanks 👍🏼
@dereton33
3 жыл бұрын
On these two button jobs you cant, you can only get a bigger flush by making the water level as close to the overflow as you can.
Spot on..... Thank ypu
@dereton33
10 ай бұрын
You are so welcome
Pleas can you help! Dont those wing nut type screws go in after you secure the cistern to the toilet?? so its secured to it?
@dereton33
9 ай бұрын
Yes they do I was just showing them in there place.
How did you attach the cistern to the pan? Did you have to undo the plastic bolts?
@dereton33
3 жыл бұрын
Yes you do.
Great video, watching this I assume you do not need to use plumbers putty or jointing compound when fitting the new float calve to the cistern bottom?
@dereton33
2 жыл бұрын
That is correct
@ijustwanttoaskaquestion106
2 жыл бұрын
@@dereton33 Thank-you. I had a small leak after fitting the valve where the copper mains pipe fits to the plastic thread of the valve so I took it apart and used some PTFE tape which stopped the leak. The only minor problem I have is the float arm rubs on the plastic syphon. I cannot see a way to adjust it and do not want to take it apart again in case I damage the plastic nut or copper nut.
I have a drip from one of the long screws that attaches the cistern to the toilet, I've tried tightening the wing nut thinking it might pull it together but it still drips. Do you think I will have to drain the cistern, take the screws out and reseal?
@dereton33
Жыл бұрын
Unfortunately Dan yes you will.
cheers Al, yes all those comlicated bits of plastic and washers tend to make me look for another job to do around the house , like cutting the grass or doing the food shop but its always there at the back of my mind poking a finger at me to get on with it...no peace for the wicked, great vid though so thanks.
@dereton33
3 жыл бұрын
I know what you mean. Keep well mate.
Nice 👍
@dereton33
8 ай бұрын
Thanks ✌
Can you confirm which end of the doughnut faces the cistern. Is it the rubbed end or the flat end. The instructions seem to show flat end to cistern and ribbed end to toilet bowl but it's not clear.
@dereton33
7 ай бұрын
The flat end.
Thank you!!!!!!!!!!!!!!!!!!!
@dereton33
Жыл бұрын
No problem Will.
I like this video
@dereton33
Жыл бұрын
Thanks.
Do you have one where the flush won't flush on how to replace the bits that need replacing please
@dereton33
3 жыл бұрын
Yes on my channel.
Could you add a link to the supply of the bag of parts please. Thank you.
@dereton33
3 жыл бұрын
It came with the cistern.
now this guy looks like a plumber I can trust.
@dereton33
2 жыл бұрын
Thanks a lot.
You look younger every time I tune in - have you found the fountain of youth? :-) I have one of those syphon that can be removed and replaced - siamp or some such name. Great idea but it is possible for the whole assembly to move when replacing part (they tend to last about 5 years in my hard water area) and hence cistern starts leaking at that union. Then one has to take cistern off and start again. There is also some rubber that perishes in the inlet - fortunately the isolation valve i put in still works but always a PITA to turn. Wish I had put the Pegler valve with lever - so much easier to operate even if they are a bit of an eyesore.
@dereton33
3 жыл бұрын
Its a case of winners and losers when it comes to plumbing.
hi I have a old downstairs toilet with 2 pipes at either side. what may this be I know one brings water in but other?
@dereton33
2 жыл бұрын
The other one is the overflow pipe.
@MrFastkey100
2 жыл бұрын
OVERFLOW MOST LIKELY
Got shown this last night in college
@dereton33
3 жыл бұрын
O well a bit late but better late than never.
I find a small amount of leakage from the nuts beneath, the washers are above as intended, and nuts done up to the correct tightness. why would this happen? Came as a kit so am quite surprised. trying to avoid the use of non-adhesive silicone as everyone says its for amateurs but the nuts wont make a seal no matter the level of tightness and perfection of positioning of rubber washer inside the cistern. Holes match... don't understand how it would be possible to make a correct seal without cross-threading the plastic nuts, silicone, or a second sealing washer.
@dereton33
Ай бұрын
The cistern might not be sitting square or you have an off centre hole in the pan. Best way to fix it to leave the rubber washer in place take off the cistern and pad around the hole with plumbers mait.
@TheRyano4ever
Ай бұрын
@@dereton33 thank you so much all I wanted to hear.
Im struggling to remove donut washer from cistern as it's attached to the inside
@dereton33
Жыл бұрын
It should not be there some one has fitted wrong.
@absalommahlangu9696
Жыл бұрын
@@dereton33 will buy new and fit it, as per your video
❤❤❤❤❤
@dereton33
3 ай бұрын
Thanks.
Understand him
@edyehabibi2647
Жыл бұрын
Unable to understand him,sorry
@dereton33
Жыл бұрын
So is that a yes or a no. I guess it`s just gobbledegook.
Is it a Caroma?
@dereton33
Жыл бұрын
No idea.
I've never done this before and I'm a girl - do you think I'll be able to manage it? I am quite handy.....
@dereton33
2 жыл бұрын
Sure you can do Rachel, don`t think being a girl makes any difference.
Great stuff. Yes, you are right. Those instructions are terrible.
@dereton33
2 жыл бұрын
Yes they are! Ha ha.