Why are guys bitching about tools? He used a router. If you don't own a router you're probably not handy enough to make these. I got a router with a table on sale at Sears for $80.

I have been in the car audio industry for over 20 years and here I am learning some more great tips from your videos.Great job they are perfect,respects.

SIMPLE MY ASS !!!!!! This guy is the 007 of the system world lol !!

You truly are an audio installation artist. I wish I knew someone like you to hand over my car to make a nice audio setup here in Italy. Cya!

@CarAudioFabrication

9 жыл бұрын

tankjr85 I am sure there are some great shops in Italy, just need to find them! Best of luck, thanks for watching!

Every video keeps getting better. Thanks for contributing to the knowledge of the car audio community.

Really love these videos! Makes taking on these types of builds more manageable!!!

You know….. anytime someone does something well in particular manufacturing something from scratch … it’s just fun to watch.

Mark is a scientist when it comes to car audio fabrication

Dude, you're a badass. All of your vids are top notch and very inspirational to watch. Too many ideas now!!

Awesome video... Thanks for all the hard work on making these videos, really helps everyone out a lot. Keep up the great work and I'm looking forward to making mine soon...

Excelent video as usual! So many great techniques and such. I had no idea there was a single stage resin for fiberglass. I think a standard UV light would probably work good for setting the resin while inside? I got lucky that you chose this style of Chevy door pod I guess. It is exactly the style I was looking for instead of the usual huge fleece and ring type. You have all the coolest tools man.

Very nice! Was glad to see the Fit Kit demo also. I understood how it worked but it's nice to see it. Thanks man.

@CarAudioFabrication

10 жыл бұрын

Lathan Hites No problem! It saves the use of foam tape like I have shown in the past and is much more precise.

Thanks for the tips. Made my custom install way easier.

Mark, love your channel. Really appreciate all the hard work that you put into these videos. Quick question for you....I am just getting into car audio, and I am overwhelmed by how many companies, speakers, amps, processors, and other equipment is now available. If you had $1000 for just audio equipment, what would you get? (For a real simple sound quality system...nothing for SPL.) thanks! Take care.

Hey I've actually done something similar like this for the front actually without all the fancy stuff. Used Bondi to fill in that gap. Came out great. Love your channel

@CarAudioFabrication

10 жыл бұрын

LooseCannon48 Thank you for watching

I've been digging your video series, and have implemented several of your ideas into my 74 LSA supercharged Corvette. Have you ever had any luck vinyl wrapping a pillar gauge pod? (or how to get the grain look) ThankS!

Love the vids bro keep them coming. ...

Would you suggest angling the speakers so they’re aiming at the listener?

Awesome video! When I die I’m coming back as you! Keep on making these videos!

Looks so simple yet he explained it so complicated

can you do project on a 240sx door pods I'm trying to one my self

Thank you very much! This is brilliant job!

@CarAudioFabrication

10 жыл бұрын

***** Thank you! Glad you like it, thanks for always posting!

Welcome back Mark I missed you and btw great video

@CarAudioFabrication

10 жыл бұрын

PSE Mentalist Missed you too! Thanks for posting like always!

"simple" door pods. (>$400 in tools you probably dont have - needed)

@duncanstamps5183

7 жыл бұрын

simple not cheap

@jonellwanger7258

5 жыл бұрын

I started off with a jigsaw. Couldn’t do anything fancy like this, but it’s a start!! Simple and cheap at first, complaining won’t solve anything.

This gave me ideas how to get my Polk 6x9s into the front doors of my 01 Yukon now I just have to find someone than can do the woodwork? I don’t have all the tools to do it myself.

Good old-school!

Great video as always. ? Which program do u use to test ur box designs? port velocity

Awesome video and great detail

How do you make a bigger door pod to hold more speakers? Say 5 or 6.

Awesome Awesome video man!! really looking forward to more!!

@CarAudioFabrication

9 жыл бұрын

Brandon Otis Thanks! Did you see video #2 of this series?

Thanks for the videos they are giving me great ideas for the future of my car.

@CarAudioFabrication

10 жыл бұрын

AWESOME! Keep me posted on what you decide to do! Thank you!

Great video, nice to see you again...

@CarAudioFabrication

10 жыл бұрын

Arsen Izhakov Thank you for commenting, glad to be back making some more videos.

Hey Mark. Can you show us a quick vid on using a single bearing flush trim bit to do the mesh from the door. I'm afraid I'm going to mess up. Cause I just cant hack $200 bucks for that bit being I'm not a shop fabricator- just personal home use type.

OK love the videos !!! But how about an 2000 Ford Excursion for door pods ?

If your using a hart adjustable wrench watch out they tend to slip of the nut or bolt very easy and smash knuckles

have you did any door pods for a 04 -10 chevy colorado yet ?

HE's BAAAACK!

@CarAudioFabrication

10 жыл бұрын

DJ Inclined Woooooo, thanks bro

@shivaprasadshetty5924

7 жыл бұрын

CarAudioFabrication

I want a pair of these!!!

Any ideas for HHR speakers boxes in back , using back side windows

What router table and tools do you use? What brand? Thank you!

damn that is a nice POD, yes you make it look simple. I will buy a pair for front and back for 6.5 Focal no tweets, with a Focal plexiglass custom piece on above the 6.5 speaker.

Love the videos, I know this is an old one but I'm going to be making some pods for my 00 silverado. Do you have a link to that stacked bearing bit you're using? I tried double stacked bearing flush trim bit and it was not working at all lol

This is awesome, but in which multiverse is this simple? I would like to visit it.

Can u add a link for the upc bit u are using I cannot find one with 4 bearings like that. Only 2 bearings. I have an 04 tahoe and would like to copy the grill like that.

vid was awesome, so many tricks,

Hey mark, are you still using the portacable router you made the video on? Just asking because I would like to try this, I have a 02 escalade that has the same grill and going to purchase a router just want to make sure u haven't upgraded it and if you have, what model so I can get 1 i already ordered mobile solutions router bit sets

Top notch, as always.

@CarAudioFabrication

10 жыл бұрын

Jacob Frey Thank you Jacob

I have a cnc router . Have complicated cuts? I can cut them .

Hey mark do you make speaker pods for customer’s

WELCOME BACK!!!

@CarAudioFabrication

10 жыл бұрын

Th3uNn3rV3d Thank you, glad to be back!

Great video and awesome machine. How do u call it?

I want to get some door pods made for my truck how much would yall charge to do so?

Good job friend

Do you sell these pods?

Nice made

You may not remember, but what size speaker is the midrange?

How are you,can you make this for a 07 Volvo xc70 cross country front and rear doors,and if so how much,can you let me know

Video on 6x9 in door pls

these will fit my truck. Any for sale?

Makes me want to rip my truck apart and start all over! Great video

That's looking good man you do some nice work

@CarAudioFabrication

10 жыл бұрын

Juan Santi Thank you, hope I helped you learn something new, thanks for watching

@jcsanti222

10 жыл бұрын

I need to get me one of dose router kits

its crazy because i was thinking about doing this before i even saw the video

How much for a pair of pods for 00-06 NBS Tahoe running JBL stage 1 6.5 inch components with tweeter??

Need one for 6x9 2004 yukon

Looks like I'll be paying someone instead hahaha

what 30,000ths of an inch in mm??

Hey Mark, thanks for the work you're doing to educate the car audio community. A these speakers connected to the door pod and not the inner metal skin of the door?

are you selling I will take a set for 6.5 components

I have to get you to email me a list of tools you would perfer to make a box pods and some fiberglass work.

Marrrrrk!!! Damn can't believe Ima first comment!! Haha. I just got a box design from you can't wait to start building it. My 02 av has the same door panels! I have to so something like this!! Awesome work man great video!

@dwizl7213

10 жыл бұрын

Mabye on here but if you were on Panteon you would've seen it yesterday lol. I as well, got my box designed by Mark for 2 SA 12's, you won't be disappointed because my box slams.

@CarAudioFabrication

10 жыл бұрын

Jacob Villegas Thanks for watching Jacob, glad you like the box design!

@CarAudioFabrication

10 жыл бұрын

dwizl7213 Love my Patreon subscribers!

Good

you should do this with basic tools not everybody has all these tools to make this happen

@CarAudioFabrication

10 жыл бұрын

JJonescaraudio1 Check out some of my earlier videos for some work arounds to do these steps without these more advanced tools, its like anything though, having the right tool for the job makes the end result much better and easier to obtain.

@JJonescaraudio1

10 жыл бұрын

thanks for letting me know and I hear ya!

@JJonescaraudio1

9 жыл бұрын

wow thanks for the info

@VLLAN-tt9on

6 жыл бұрын

CarAudioFabrication even though thats true and we know that, still not everyone has those tools

@chancepantswindham7745

5 жыл бұрын

52^ V1LLA1N he literally just gave you an alternative option

Dont get me wrong. You still my go to guy but whew! Ya killin my wallet here lol

Anybody with one of these trucks or suvs ever put an 8" in the door?

Can u make me a pair?

COOL///////////////////////

@CarAudioFabrication

2 жыл бұрын

Thanks

Where can I buys these already made?

@billygreenhorn9275

7 жыл бұрын

walmart

0:03 looks like high as fck! LMAO

simple! /s

I like this stuff but I need a new car but my car is old but runs very well so I'm Stuck with it for a wile. I tried that fiberglass crap all I got was a sticky pice of shit Hope it drys someday it smells bad

@KBCHILLIN614

7 жыл бұрын

when it stays sticky it means you didn't use enough hardener you can go over it agin just add more hardener

He’s so distinguished and young

never mind, I see my answer in part 6

Everything about them is simple Except for making that

How To Make Simple Door Pods Using Tools You Can't Afford

@CarAudioFabrication

5 жыл бұрын

Yet everyday I have people sending me pics of what they built. Most of them aren't the type of people that look to find excuses why they can't do something. Everything shown in this video can be done with basic tools.

@chancepantswindham7745

5 жыл бұрын

That’s why you won’t ever do shit ‘Canella”. Little punk bitch.

If you need pictures of my vehicle I can send them to you

hi. luv you. bye.

@CarAudioFabrication

10 жыл бұрын

LlamaGumby Love you too

What's the point of this if you don't show how you attached the piece to the door panel?

@bobbg9041

7 жыл бұрын

Screws with large flat washers. you want to try and keep the original door panel in tact. But other then that its just Eye candy because a 6.5 will fit that door without this panel added on.

Hey. Sell me those!

😜

Buy a CNN router table will save a lot of time and time = $$$$$

He says simple,HAHA

You shud just make em and sell them I wud buy it make one for my g35? I'll pay you 150 for both doors.

@CarAudioFabrication

5 жыл бұрын

😂 Sorry but $150 isn't even close to what I would need to charge for these.

@jr1001jr

3 жыл бұрын

@@CarAudioFabrication 🤯

LOL Simple.....

In my 20 plus years of doing this kind of work ive never once needed a router shield thats the biggest waste of money

@WhiteSupreme

6 жыл бұрын

Wow I bet you feel pretty important telling a bunch of random people on the internet. Great job here is your "Who gives a fuck" Trophy. Congrats bro!

Yea but that stacked trim bit is $200 bucks!!!!!!!!!!!!!!!!

@CarAudioFabrication

9 жыл бұрын

You can lower and raise the bit as you go around the piece. Just more time consuming.

that bit shows that its bent.....

@CarAudioFabrication

10 жыл бұрын

Moldy Taco Huh

i love your videos but that shit is the farthest thing from"simple" common "joes" dont have all the stuff needed for that. good videos though

This wasn’t simple man.

Do you sell these pods?