HOW TO MAKE SEVERAL PARTS WITH THE HYDRAULIC PRESS MACHINE NARGESA MX700
Ғылым және технология
Welcome to the new Nargesa’s tutorial clip for the MX700 punching machine, it’s characterized by its robustness and versatility. It can perform multiple job functions such as punching operations on plate, tube, angle, profile U, T, UPN, IPN ... Folding, cutting, and it can also be adapted any kind of tooling, even if it’s been created and manufacture by the very customer. Its versatility and easy handling make it an indispensable equipment for a steel world company.
In order to make a punching operation, first we insert the die and screw it with the key. Then we insert the punch into the corresponding nut and screw it tightly.
To center the punch, we get the piston down in the manual performance mode and we lift the die holder until the punch is inserted into it. Right after, we center the base with the punch and screw the base making sure it’s properly aligned.
We get the punch down also in manual mode by adjusting the lower limit displacement until the punch is inserted just 2 mm into the die. It is very important not to put the punch in more than what’s indicated.
We place the stops to the desired distance. It’s quite important to lubricate the punch and die every 200 punching operations, this simple gesture will guarantee a longer useful life for the tooling.
The punch diameter of should always be bigger than the thickness of the sheet to be punched. This is one of the main causes of breakage.
Depending on the punch size, we will use either one or another plate to improve the extraction and to avoid possible deformations in the punched piece.
The upper limit switch will be adjusted just once the punch is inserted up into the extractor.
The stripper die will enable us to cut 90 degrees’ pieces on all types of sheets and profiles at different lengths. Side stops will be adjusted independently, so the desired dimensions could be achieved, up to a maximum of 150mm.
The folding tooling for 170 millimeters has two working “V” slots, one of 56 millimeters that allows us to fold thick plate of 6mm up to 15 millimeters and the other “V” of 26 millimeters to fold thicknesses of 0.5mm up to 5 millimeters. The folding degree will be regulated according to the height of the stroke end of the machine.
When folding parts up to 300mm, we can use a tool with different openings that allows the folding of sheets from 0.5mm to 20 millimeters thick. The dies consist of two different radii, a bigger one for thick plates and one smaller radius for smaller thicknesses. Depending on the thicknesses we use the die for, it will open more or less. The smaller the slot, the thinner the sheet thickness we will be able to fold.
Pipe notching has always been a slow and laborious work. With the pipe notching tooling, the user will have the piece finished and ready to be welded in only two simple steps.
We manufacture all sorts of dies to get rounded shapes on flat bars ends, on different lengths, widths, thicknesses, with or without holes ... in only one stroke. The tooling cuts the beginning of one piece and the end of another, so it allows the user, to manufacture pieces of different lengths by using the same tool.
The MX700 can be adapted any type of die to punch different shapes, such as the arrow making tool to fabricate fences in an economical way.
Robustness, reliability, versatility, easy handling, fast set up, 350 mm neck, 160mm of piston stroke, a large and wide table of 600 x 350 mm with a central hole, for the evacuation of parts, make out of the MX700 one of the best hydraulic punching machines on the market.
We set the upper limit switch to the desired size. We operate the machine in automatic mode. The piston moves to the upper limit. Then we set the lower limit switch and proceed to perform the operation.
It’s got an incorporated parts counter.
In manual mode the piston only descends, it does not go back. It is used to center and fix the different tooling.
In automatic mode the piston goes down and then it moves upwards automatically.
Safety device- When the red light is on, we can work with the machine without the protection screen. At the moment we deactivate this device we can only work when the protection screen lowered.
One of the best features of this machine is to have the possibility to be adapted any type of tooling in a very simple way. By uniquely using a nut and one adapter, any die could be fixed to it by its upper part. Next we will display some of the applications of all kinds that has been manufactured for different Nargesa’s customers, from small companies, to large automotive multinationals like Ford and Nissan.
+INFO
www.nargesa.com/en/industrial-...
Prada Nargesa S.L.
Manufacture and sale of industrial machinery
nargesa@nargesa.com
Tel. (+34) 972568085
www.nargesa.com
Пікірлер: 434
not sure why youtube recommended this to me but i do love seeing how things are made
@Nargesa
7 жыл бұрын
Dear icychill105. KZread uses its own algorithms to recommend videos, depending on your searches. We're glad you enjoyed our tutorial. Best regards
@oliverjuras
5 жыл бұрын
Awsome
@vanodiyafabricators3225
5 жыл бұрын
@@Nargesa i am interested this machine with accessories.
@Nargesa
5 жыл бұрын
@@vanodiyafabricators3225 You can see all features and prices in our website. If you want we will assist you personally, please fill the contact form that you will find in the site: www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx700
Thank you for sharing this! Not only is it mesmerizing to watch, it's very informative and usefull since I model alot of sheet metal parts in my line of work.
@Nargesa
5 жыл бұрын
We appreciate your message Mr. Kent Hest
i love that this was in my recommendeds, its cool to watch
@Nargesa
7 жыл бұрын
Thank you for your comment Greg Foster. If you want more information for this machine you can see our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
Nargesa for me is the best company that building machine for many reasons 1-Build for tuff 2-one machine can do a lot of options 3-great design 4- and the best your machine collar I haven't a chance to see any one of your machine face to face and that is my dream Keep going and you are the best with my wishes
@Nargesa
6 жыл бұрын
Thank you for your comment
I can watch this all day, this machine is amazing the operation is effortless. I love this to have it in my shop, it'll widen your creative mind in fabrication.
@Nargesa
4 жыл бұрын
Thanks for your comment @Jamspeed!! We love that you like our products 😀
This machine is absolutely amazing, you can see the thickness of the metal used in construction of the machine and know that it's made to last it's a machine every machine shop should have ,I wish I'd be able to get my hands on this type of machine it's absolutely amazing all the different things that can be done with it , they're endless, only blocked by the limit of your mind !!!!
@Nargesa
6 жыл бұрын
We sincerely appreciate your comment Mr. Robert Reichwein. If you want more information concern machines we manufacture you can send us an email to nargesa@nargesa.com. Our sales department will assist you. Best regards
I just love how it does it with such ease
@Nargesa
6 жыл бұрын
Thank you for you comment runforitman
Very impressive precision and quality, and so versatile
@Nargesa
7 жыл бұрын
Thank you for your comment Ronan Rogers. If you want more information for this machine you can visit our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
@dineshpanchal6262
3 жыл бұрын
Contact 9327009352
@Nargesa
3 жыл бұрын
@@dineshpanchal6262 Please send an email to nargesa@nargesa.com and we will assist you
Awesome Machine! 😃👍
@Nargesa
7 жыл бұрын
Thank you for your comment ScoutCrafter. If you want more information for this machine you can see our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
21:38 wow thanks for this idea with urethane :D Been scratching my head for some time today just about how to make this same thing using more complicated ways. Great machine btw.
@Nargesa
7 жыл бұрын
Thank you for your comment Pawliukaz, we always try to make technologically updated equipment, and easy to handle, the best of our Brand is to provide fast and affordable solutions for all our customers. If you want more information concern this machine you can visit our website: www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx700
I like this machine. Hydraulic always makes engineering work so easy.
@Nargesa
4 жыл бұрын
Thank you for your comment @Evans Adongo 😀
So powerful, yet elegant.
@Nargesa
7 жыл бұрын
Thank you for your comment johanis pro, if you want more information for this machine you can see our website: www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx700
so satisfying to watch!
@Nargesa
7 жыл бұрын
Thank you for your comment Anas Malas
I want one of those even though I would do nothing with it
this is real hidraulic press channel !
@Nargesa
7 жыл бұрын
Thank you for your comment New Blaker
That is one serious tool!
@Nargesa
6 жыл бұрын
Thank you for your message Patrick Perry
Very impressive, I never knew heavy steel could be cut and bend so easily
@Nargesa
6 жыл бұрын
We celebrate that you like this machine. If you want more information you can see our website: www.nargesa.com/en/industrial-machinery
Colin Furze needs one of these!
Thx YT for recomending this machine to me. Now i must buy Nargesa mx700.
@Nargesa
6 жыл бұрын
bet you will!!
wow. fantastic machine.
@Nargesa
7 жыл бұрын
We sincerely appreciate your comment courier11sec. If you want more information for this machine, you can see all features in our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
@Nargesa
7 жыл бұрын
Thank you for your comment steven0seagul. Best regards
@Nargesa
7 жыл бұрын
Thank you for your comment courier11sec, if you want more information for this machine you can visit our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
Wow, pretty cleanly video
@Nargesa
5 жыл бұрын
Thank you for your comment Superda Machine
*Wow so nice!*
@Nargesa
7 жыл бұрын
Thank you for your comment Dorfnasen. If you want more information concern this machine, you can visit our website: www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx700
very satisfying to watch
@Nargesa
7 жыл бұрын
Thank you for your comment T1HSTAE
Jeez that cuts like butter
@Nargesa
4 жыл бұрын
Thank you for your comment @Jeff Abercrombie
impressive looking forward to have one.
@Nargesa
7 жыл бұрын
Thank you for your comment Knight Rider. If you want more information concern machines we manufacture you can send us an email to nargesa@nargesa.com
Esta máquina é muito versátil, parabéns para os engenheiros que desenvolveu
@Nargesa
6 жыл бұрын
Agradecemos o seu comentário senhor Marco Carvavalho. Eu vou dar os parabéns a toda a equipe! 😄
this would be an amazing tool for any machine shop...
@Nargesa
7 жыл бұрын
Thank you for your comment Dustin Bess. If you want more information concern ironworkers we manufacture you can visit our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
Esse vídeo te faz ficar cada segundo admirando essa máquina, que não faço ideia quem compraria
@Nargesa
7 жыл бұрын
Agradecemos o seu comentário Ulisses. Para mais informações sobre esta máquina que você pode visitar nosso site: www.nargesa.com/es
This was rather impressive
@Nargesa
6 жыл бұрын
Thank you for you comment Super Noodles
I like your machine, very strong and... beautiful
@Nargesa
7 жыл бұрын
Thank you for your comment. If you want more information for this machine you can visit our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
Nice tooling
@Nargesa
4 жыл бұрын
Thank you for your comment @Sanyasirao Senapathi
thanks to the youtube recommendation glitch, we here witness yet another innocent channel that grows its views by tens of thousands. I have been watching hydraulic press videos and I believe that is why I am here. Nice video nonetheless. maybe you guys can consider making sone hydraulic press vs random objects videos as well? that may eventually help the sale 😊
@Nargesa
7 жыл бұрын
Thank you for your message 邵牧童
sometime, i hate youtube recomendations vid. but,this one is amazing.
@Nargesa
7 жыл бұрын
Thank you for your comment risk Esc, best regards
welcome to the hydroolic press channel. lets see...
fascinating hwo it just slides through like its hot butter
Excellent ideas. I liked all vedioes.
@Nargesa
7 жыл бұрын
Thank you for your comment Chaman Lal .Panchal
perfect, I'll take it!
@Nargesa
7 жыл бұрын
Thank you for your comment R M
good all in one nice
What a great machine! I can't believe it cost less than $5,000 including most of the dies showing. Truly a great price
@Nargesa
7 жыл бұрын
Dear v carm, if you send us an email to nargesa@nargesa.com our sales department will make you a quotation for this machine and tooling. Best regards
Amazing machine
@Nargesa
6 жыл бұрын
Thank you for your message Surhoto Medeo 😄👍
super work
@Nargesa
7 жыл бұрын
Thank you for your comment Nagdi Mansur. If you want more information concern machines we manufacture you can see our website: www.nargesa.com/en
I need this for no reason and at the same time for every reason.
@Nargesa
7 жыл бұрын
Dear STURGOD BLADES & SMITHING Inc. Send an email to nargesa@nargesa.com, our sales department will assist you
Superb one 💯
@Nargesa
4 жыл бұрын
Thank you for your comment @Pratham Shah
The time saved from drilling material and then cleaning burr and mess from a work piece and the work area means this machine will pay for itself in time,it looks well made and is very,very good.
@Nargesa
7 жыл бұрын
Thank you for your comment stabilisedchaos, if you want more information for this machine you can see our website: www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx700
I think I'll get one for my living room
amazing machine
@Nargesa
6 жыл бұрын
Thank you for your opinion Mr. danilo suarez
My father owns a computer operated punch its pretty cool stuff
@Nargesa
6 жыл бұрын
Thank you for this message Matthew Stephens
I just felt in love
@Nargesa
6 жыл бұрын
Thank you for your comment ArmFightChannel!! If you want more information concern machines we manufacture you can see our website: www.nargesa.com/en/industrial-machinery
@sebasghione
6 жыл бұрын
Yes! I visited the webpage yesterday, awesome machines!
@Nargesa
6 жыл бұрын
We are glad that you like it!! If you want contact us, you can send an email to nargesa@nargesa.com, our sales department will assist you!
Very good machine
@Nargesa
6 жыл бұрын
Thank you for your comment
I love the video. But I am left with a question. Will heating the metals have any effect on the shaping of them? I will appreciate any feedback concerning my question.
@Nargesa
6 жыл бұрын
Dear Mr. Richard Gladle. If you refer to MX700 you cannot use hot metal because the tooling would break down. If you refer to punching, then it would cause effects on the material because the operation would distort the material
interesante herramienta, ¿de que material estan hechos las piezas destinadas para realizar los cortes?
@Nargesa
7 жыл бұрын
Saludos Pedro Jimenez, si se refiere explícitamente a la cuchilla que corta pletina el material es: acero 1.2379. Si tiene alguna otra consulta puede contactarnos a nargesa@nargesa.com
Dear Santa, ...
@Nargesa
7 жыл бұрын
Thank you for your comment brys555, if you want more information for this machine you can visit our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
@sysierius
6 жыл бұрын
I want for Xmas.... worlds biggest nail clipper
@AMalas
6 жыл бұрын
brys555 hope santa has put the purchase order in time 😂
So cool.
@Nargesa
6 жыл бұрын
Thank you for your comment james craghead
very good
@Nargesa
5 жыл бұрын
Thank you for your comment Mr. @Mickey Hacker
very very good
@Nargesa
7 жыл бұрын
Thank you for your comment Jwhhbasm Jshgwgbasn. If you want more information you can see our website www.nargesa.com/en
very nice
@Nargesa
6 жыл бұрын
Thank you for your message Mr. ARJUN PRASAD RAM
muy bueno gracias
@Nargesa
7 жыл бұрын
Agradecemos su comentario Hugo Jose Blanco. si desea mas información sobre la maquinaria que fabricamos puede visitar nuestra página web www.nargesa.com/es/maquinaria-industrial
I can just imagine how much. ..
love to have a work shop full off this stuff.
@Nargesa
6 жыл бұрын
Thank you for your message chris worth, if you want more information, please send an email to nargesa@nargesa.com and our sales department will assist you
Nice
Наикрутейший агрегат👍
love your machine!!! i see from your website that you are in Spain. Do you have a dealer in the U.S.?
@Nargesa
7 жыл бұрын
Dear fred Ely. We have dealer in U.S. Please send an email to nargesa@nargesa.com and our sales department will assist you
*i got here randomly....and i can say..machines r awesome...*
@Nargesa
7 жыл бұрын
Thank you for your comment tammy brown
@tammybrown8033
7 жыл бұрын
*ur welcome :)*
آلة جبارة واحترافية وشرح واضح جداً ومفصل من النادر أن تجد منتج أو مسوق يقدم مثل هذا الشرح. سؤال : هل يتم بيع الآلة مع كامل الإكسسوارات الموجودة في الفيديو كمجموعة واحدة ؟ أم تباع لوحدها والإكسسوارات تطلب لوحدها؟ ومن هو وكيلكم في السعودية ودول الخليج العربي؟ شكراً
@Nargesa
6 жыл бұрын
We deeply thank you for your compliment. This hydraulic press is provided with the punching kit, all the other accessories are optional thus provided under request. We sell directly from our plant in Spain to Saudi Arabia and all the Gulf countries, no dealers. Please, send an email to nargesa@nargesa.com, our sales department will assist you. Best regards
very nice machine👌👌👌
@Nargesa
5 жыл бұрын
Thank you for your comment Nargis Shakib 😀
very interesting ,i would like to have this machine
@Nargesa
6 жыл бұрын
Dear Dinesh Jain, please send an email to nargesa@nargesa.com, our sales department will assist you
Never realized how versatile these machines are... wish we had one where I work
@Nargesa
4 жыл бұрын
Thank you for your comment @Mr Hemp
Hmmmm very interesting.
@Nargesa
5 жыл бұрын
Thank you for your comment @Sheikh Hashim
WHOOAH!
@Nargesa
7 жыл бұрын
Thank you for your comment Henrique Corrêa. If you want more information for this machine you can see our website: www.nargesa.com/en/industrial-machinery/ironworker-machines
Realy I want this
@Nargesa
3 жыл бұрын
Thank you for your comment! Please send an email to nargesa@nargesa.com and our sales department will assist you
perfect
@Nargesa
7 жыл бұрын
Thank you for your message Tufan Taha, if you want more information concern machines we manufacture, you can see our website: www.nargesa.com/en
انه عمل راءع وجميل ولقد استفد منه لكوني اعمل بنفس الاختصاص شكرا لكم على هذه المعلومات التي نشاهدها من خلال هذه الفديوات اتمنى لكم كل التوفيق مع خالص تحياتي واحترامي ارجو المزيد
@Nargesa
6 жыл бұрын
شكرا جزيلا!!
super
amazing machine, where i can get this in Indonesia ??
@Nargesa
6 жыл бұрын
Thank you for your comment bazred satriani. Please send an email to nargesa@nargesa.com, our sales department will assist you
coba ada alat begini di indonesia. mantap👍👍👍👍👍👍
@Nargesa
7 жыл бұрын
Dear Abdul Khanan.Please send an email to nargesa@nargesa.com and our sales department will assist you
TOP!
@Nargesa
4 жыл бұрын
Thank you @Genivaldo Sabino 😀
Nice ironworker, we have a similar one but not as nice.
@Nargesa
6 жыл бұрын
Thank you for your comment Randy Neal
It has its advantages over other methods. It's sure faster than using a saw !! What's the purchase price of this machine ??
@Nargesa
6 жыл бұрын
Thank you for your comment Roger Rabbit. Please send an email to nargesa@nargesa.com and our sales department will make you a quotation
nice
@Nargesa
7 жыл бұрын
Thank you for your message Mr. Firuz Rohman
TOP
How much pressure just being applied?
@Nargesa
6 жыл бұрын
Dear petestreet. Hydraulic power of MX700 is 70 tons. You can see all the features of this machine in our website or send an email to nargesa@nargesa.com website: www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx700
usefull for college students
@Nargesa
6 жыл бұрын
Effectively shubham saxena. Several of Nargesa ironworker machines are already in training centers
I like
Du beau travail ! Belle machine qui doit faire gagner du temps et de la précision.
@Nargesa
5 жыл бұрын
Merci beaucoup pour votre commentaire Baudouin ROZET!!
This is a fascinating and very useful/versatile machine; however, when bending 90 degree angles, there's no guard or guide to keep the bending surface perfectly square. I find that to be something negative as it could cost money to replace a part that has to be scrapped due to it not being square.
@Nargesa
7 жыл бұрын
Thank you for your comment JPG23. It does have a guide to keep the perfect 90 degrees square
That tuyet thank.
@Nargesa
6 жыл бұрын
Dear Huy Nguyen, please send an email to nargesa@nargesa.com, our sales department will assist you
Thats a nice machine, i have seen similar machine in a workshop in my town but not as cool as this one. So much variety of application. Just out of curiosity i want to know how much this machine costs.
@Nargesa
6 жыл бұрын
Thank you for your message Tumpa Talapatra! Please send an email to nargesa@nargesa.com and our sales department will send you all details: warranty, optional tooling, features and price
First time I see a hydraulic press being used on YT to actually do something productive
@Nargesa
6 жыл бұрын
Thank you for your comment Anthony Linley
Wow very nice how much mission price
@Nargesa
6 жыл бұрын
Thank you for your comment. Please send an email to nargesa@nargesa.com and our sales department will assist you
How many ton is the hydraulic press?
@Nargesa
6 жыл бұрын
Dear booger king. MX700 Ironworker machine has a tonnage of 70 tons. You can see all features of this machine in our website: www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx700
it is graet !
@Nargesa
5 жыл бұрын
Thank you for your comment aqil Ibrahem
does it work with stainless steel?
@Nargesa
6 жыл бұрын
Of course you can work with stainless steel, but you always have to apply the punching calculation to know what is the maximum diameter you can make in each thickness of plate
Awesome machine can I buy this one am from India
@Nargesa
6 жыл бұрын
Dear srivari arumugam, please send an email to nargesa@nargesa.com and our sales department will assist you
Can it punch holes in a steel box
@Nargesa
5 жыл бұрын
Hello @Extra Mental. Please send an email to nargesa@nargesa.com explaining in detail how is the piece you want to make and our sales department will assist you
Very nice,but how much cost this press?
@Nargesa
4 жыл бұрын
Hello @Gabi Laczo. You can see all features and prices in our website: www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx700
What kind of metal is being used to be handled by hand so effortlessly.. 15mm thick bar so about 5/8's inch thick. So what is it, does the material have a low Yield and high tensile or is the person just really strong. I work with a lot of 1/4 to 7/16 inch steel master coils. And I understand how heavy just a little bit of scrap can be... so I was just wondering the material.
@Nargesa
7 жыл бұрын
Dear justin liner. Please send an email to nargesa@nargesa.com specifying which operation you mean and our technicians will give you an answer
cool
@Nargesa
6 жыл бұрын
Thank you for your comment kumar kumar
اجمل ابداع. ياريت نحصل عليها. وكم سعرها
@Nargesa
4 жыл бұрын
ر لكم جميع الخدمات و المعلومات التي تحتاجونها، نرجو ان تبعثو لنا رقمكم الهاتفي الى هذا العنوان mailto:nargesa@nargesa.com فسيتم الاتصال بكم في أقرب وقت ممكن. شكرًا على ثقتكم بنا
Press manufacture demo for salesman purpose. Suitable for small/medium run production. Look for modern mass production automated press line videos.
@Nargesa
6 жыл бұрын
Thanks for your tip. The suggestion you make is different to the production line we currently have
what is power of this press in tons ?
@Nargesa
7 жыл бұрын
Dear Mwaqas Saddique, we manufacture two models of Ironworker machines. The MX700 have 70 tons of hydraulic power and MX340 have 40 tons. You can see all the features of this machines in our website: www.nargesa.com/en/industrial-machinery/ironworker-machines