As a 70 year old, just seeing how modern materials replace the balsa kits(when we were 12 years old) where each rib and gusset was cut out with an Xacto knife. Covered with tissue and dope (and fuel proofer)to be replaced later with iron on coloured film. Thimble Drome, Cox, Fox and Enya where the power plants in use. Radio control was in its infancy with the first being rudder control (yaw induced roll) using rubber band escapement “technology”. We only had control line! The rich kids had a PT flight trainer from Thimble Drome, but we had plans and an .049 baby bee! One motor for a hundred home made planes! Today you can buy a ready made plane with all the accessories, motor virtually already running in the box! No fun in that. Kudos to this aero modeller. Now to find some hd foam! 👍😀

@randall4411

7 ай бұрын

I know exactly how you feel . I get to be 70 for another month .

@talhahabib9869

7 ай бұрын

Seeing u still here make us believe to stay strong if u dont giveup life wobt make u an old man ❤

@alc1715

7 ай бұрын

I love the enthusiasm, just know someone is looking up to you

@friedenshetzer8950

5 ай бұрын

Ich bin auch "Ü 70"! Klasse!!!! (Polaris XL, Sopwith Camel, 1.80 m, Andreas von Höllein) Gerhard

@pescaytravesurasconelchapu8357

3 ай бұрын

4č que

This is what an aeromodeller used to be. It's nice to be spoiled these days with ready made models but it's good to see someone still has scratch-building skills and is willing to share them!

@jirkkozak2252

Жыл бұрын

😮

@jordancoleman2402

Жыл бұрын

For years I spent way to much money on over priced styrofoam airplanes and was never truly happy with how they performed, now I build my own out of foam board from the dollar store and have made changes to my designs to get them to fly exactly how I want them to. It took a lot of trial and error and a lot of research but in the end it's a great feeling flying something you created and flys better then others $800 airplanes.

@bilalabdoulrahim459

10 ай бұрын

​@@jordancoleman2402o

@avinashkumarsah3654

10 ай бұрын

चषजजखउ यलख

@mustangxxmatty3106

6 ай бұрын

so basically you did what flite test did and has been doing for 15 years@@jordancoleman2402

Impressive build from styrofoam! I liked your homemade drill. Shows creative thought and DIY skills.

@user-oo1pu6bj1c

Жыл бұрын

Это примитивная модель

That's modeling, right there! You don't have to spend a ton of money to enjoy the hobby! Right on, brother!

My compliments, wonderful work, greeting's from Rome Italy 😏💪👏

Nice work! I like the hot wire cutting of the wings.

Awesome build. I really like that you are reusing materials that would otherwise end up in the landfill. I am just now getting back into RC after a long time off. May have to put this one on the "to do" list. Thankyou for sharing.

The flip and the smooth modelling was everything for me. This is now gonna be my new hobby!

Chiếc máy bay thật đẹp. Một mô hình đáng để học hỏi. Cảm ơn.✈️✈️😍

Great idea to cut spar grooves into airfoil template. Nice build!

Simples e perfeito, um ótimo modelo para se iniciar... 👏🏻👏🏻👏🏻👏🏻

@diegosayin9394

11 ай бұрын

❤😊🎉

Very nice. You did a great job. Thank you for all the building tips.

That looks like a lot of fun! Nice craftsmanship. Can’t wait to give that a try

Nice plane, video and well edited. Shows what you can do for relatively little cost. Much more satisfying than buying artf!

Very cool build! Now I want to build an RC airplane. I have several but haven't taken the time to make one. Your techniques are also great if you just need to rebuild a crashed airplane and need to fabricate section of one. Awesome video!

Nice work, she's a beauty, and handles very nice also.

Perfect take off and landing. Excellent creation of this Cessna.. Been looking for something like this for long time. I am planning to recreate one like this. Appreciate all the effort by the creator

It's great to see someone who is dedicated and has talent for building model aircraft at the plant. I have several models made by me, some are kits, others I used plans from Don Smith and Zirole. I used a lot of sandpaper, a stylus, carbon paper, glues and many tools I made myself. Parabéns meu jovem.

Great satisfying build sir. Thanks for sharing it.

That's awesome! And....inspiring! Awesome power drill!

dayummmm!! simple and awesome! 👌

Excellent solution for the construction, with cheap and easy available materials, but efficient in terms of resistance an weight.

Fantastic work, buddy! It flies really well! 🙌🏻

@velkarthik

Жыл бұрын

Hey Max, big fan from India, love your creativity and will to create! Planning to contact you regarding some ideas soon!

Modellfliegergrüße nach Asien! Danke, was zum Nachmachen!

Fantastic work. Great skill manual that no longer exists today. Maravilloso trabajo. Gran habilidad manual que hoy ya no hay.

Very pleasing and practical, thank you😀

There is a point that this toy plane look real cessna 🤩

Love your drill and hot wire cutter. You are one gifted individual!

I JUST HATE WATCHING PEOPLE WITH SO MUCH TALENT..IT JUST ENDS UP SHOWING ME IN EXACTLY WHAT AREAS I HAVE FAILED IN MY LIFE...LEAVING ME TO SPEND AT LEAST TWO HOURS EVERY AFTERNOON WALLOWING IN MY OWN SELF PITY...😅😅😅😅😅 (GOOD JOB BUDDY)

Top job. Looks and flies great. 🛩👌👍

Your building techniques is very very impressive 😊

@user-oo1pu6bj1c

Жыл бұрын

А моя?

Very impressive!! The wing struts add a nice touch. 👍👍👍👍👍👍👍👍

belo trabalho.... modelo ficou lindo!!!!! parabéns

man this is amazing, so much from so little, and yet looking so much the part... my first RC plane was a Cessna 150 (almost 50 years ago), and I remember it eventually flying a bit too fast for confort from being overloaded (too much paint and glue at the rear I suppose, then hefty balancing lead like half a pound, later swapped for a stronger motor...)

congratulations very successful. 👏👏

Now I need to make these & fly..thou I love flying Paraglider

Que buen video gracias por compartir, la verdad me gustó mucho, desde hoy uno más del canal gracias por compartir sus conocimientos Dios le bendiga mucho, saludos desde Santa Catarina Pinula Guatemala bendiciones

This is a truly amazing build. The engineering is amazing.

Flawless landing. Impressive.

Rapi banget om hasilnya mirip buatan pabrik

This is i think the best video about making planes that can teach me and motivate me to make one

Smart and neat work.. very well done man.. thanks a lot for your good effort.

Great job, that thing looks awesome!

Robust build. Thanks for the video.

Bro ur an absolute legend had fun watching Thanks

@3JWings

6 ай бұрын

Glad you enjoyed

Watching you make the wing was very satisfying!

Great job very beautiful 🎉

Good, solid design. Nice job.

what could be better than this. marvellous!!!!!

Your mini drill is badass!

Nice build video ! That plane turned out great .

Great attention to detail and finishing. Beautiful plane.

@3JWings

6 ай бұрын

Glad you like it!

Very good and very nice. Beautiful. Fantastic. Sir

Very nice build.

Wow great idea for working aeroplane

These videos are so satisfying to watch, I love them

Show de bola 😃😃😃 parabéns

Great R/C plane! Nice work! Cheers! 😁🔧🛠️👍

@3JWings

Ай бұрын

Thanks 👍

Awesome video! Looks great! Just had a few questions. What are the clear plastic things made from that you used to make the hinges? And what did you make the foam tires from and how did you do that?? Any ideas for good quality but cheap epoxy resin glue?

做的非常不错，学习了

I really like the Cessna 150. I’m currently working on a 260 cm version of it.

Very very nice ... you have a golden hands 🖒💐

@3JWings

11 ай бұрын

Thanks a lot 😊

very nice extreme maneuvrebility . well done 👍👍👍👍

❤ ขอบคุณคุณโยมมากมากมากครับ

GOOD JOB!!!!!! I saw the APC propeller and I prefer the more soft one, called GWS... for park fly, but it is only my taste =) AWESOME VIDEO!!!!

Thank you for giving me a model and you deserve everything🥰🥰🥰

such an amazing work

Awesome video bro I always wondered how to cut the airfoil into the wing beautiful thank you for sharing.

Muy bonito y vuela bien.

Bravissimo........anche io costruisco come fai tu ...uso il depron colla a caldo e compensato.......ciao tanti auguri....

Espectacular. Muy bueno

Great job bro! Rc planes are the best nice work.

❤ ขอบคุณวัดเจดีย์หอยครับ

In one word - GREAT 👌👌👌👌

Parabéns!👏👏👏👏

Wow you have great control on the plane and great landing

@3JWings

7 ай бұрын

Yes, thanks

Do you have a video showing your foam cutter? Nice work!

Tuyệt vời, tôi rất thích máy bay chế tạo riêng mình. Nếu mua thì nói làm gì nữa. ❤❤❤

Very nice. I love the pinstriping.

Beautiful creativity

Really appreciate your work👌👌

What a nice creative design and build. Thanks for sharing as learnt a few things from your techniques. You make the build look easy, but at same time very inspiring.

@SachinKawshalya

10 ай бұрын

😂😂😂😂😂😂🎉😂😂😂😂😂😂

I want to make this. Thank you,sir!!

Beautiful job!

Спасибо за видео!

Nice plen

Appreciate your work👍👍

Muy bien y buen aterrizaje 👍

I also congratulate you in every respect! It was made using good material! Nice end result! May you have more pleasant days and weekends in strength, health and peace, of course, just like that for everyone!

WOW!!!.. just WOW!!!

Sweet project!

Wow😮

Very cool build

Love your videos so much 😊

very nice good job

Outstanding bro🎉🎉🎉🎉

I see u like working with a budget as well. Good work sir. What is the translucent tape u used there?

Nice job .

Hi friend, Thanks for such beautiful work. I just wanted to know how you made that foam cutter used to cut the wing. Thanks

Great builder … I started with a F-16 slope glider which was very similar to your build but was a very fast flying plane and then my fellow engineer added spares with the works to fly with a gas engine on it with good results. Wind’s had to be at least 30-40 nots to slope fly very fast so much fun then the motor even got better…. Great 🤩😁🤩