How to make Powerful Spot Welder Using Capacitor
$2 for 2-Layer PCBs & $5 for 4-Layer PCBs: jlcpcb.com/PCH
#spotwelder
#spotwelding
#spotweldingmachine
#18650
#spotwelding
spot welder using capacitor
how to make spot welding machine
diy spot welder using super capacitors
How to make spot welder machine at home
18650 battery spot welding machine
Diy spot welder for 18650 batteries
spot welding machine homemade
Battery spot welding machine
spot welding machine
spot welder diy
In this video, I'm showing how to make a portable spot welder machine at home using super capacitors, i used 4x 6800uf/35v capacitors with bridge Rectifier & 9-0-9 Transformer, The best part is this spot welder can be directly powered up by Ac 220v.
So, watch full video without skipping.
LINKS______
👉 Circuit Diagram & PCB layout, Gerber Files Download link
drive.google.com/drive/folder...
👉Join Group: / 819126578700997
👉Follow Page: / creativetechvids
groups/819126578700997
👉Follow Page: / creativetechvids
Watch Other Videos 😍_______
How to make Mini Inverter | DC to AC 1.5v-220v
👉 • Mini Inverter 1.5V to ...
How to make 12v battery Fast Charger
👉 • 12v battery charger ci...
How to make dc to dc boost converter | voltage doubler
👉 • how to make voltage do...
How to make solar power bank at home
👉 • Video
How to Make USB Soldering Iron Using Pencil
👉 • Video
Пікірлер: 349
A very fine job on everything. Thanks for sharing with us.
Simplicity and clarity of your video is amazing!
@CreativeTechos
Жыл бұрын
Thanks for appreciating, Thanks for watching 🙂
Couldn't be more simpler and clearer than this!
@Jenevie_Delloson_
Жыл бұрын
You can do it simple without using transpormer and briagde rectafire, some diy like this is used 12v charger 1 or 2 capasitor,diode, and wire. Im also than doing it in a year ago take note to use diode if you will use 12v charger or other 12v supply to protect it from fly back of capasitor
Every time I think of a new project you already have an awesome video on it! Keep it up!
🙏 Thanks Brother for this Project. I will try it and if it work then it's very helpful for me
@CreativeTechos
Жыл бұрын
It works good, also you may would like to check out this new spot welder with strong and professional welding kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
I like your videos, but I'd really like to see a schematic diagram of the circuit during the video .
ใช้ KBP3510 Bridge Rectifier Diode 35A 1000V ได้ไหมครับ
Thank for you very simple
@CreativeTechos
Жыл бұрын
Thanks for watching 🙂
Hi, excellent thanks for the Share !
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
This is very usefull video Thankyou bro❤ love from India🙏🙏
@CreativeTechos
Жыл бұрын
Glad to know that, Thanks for watching my friend 🙂
Thanks!
@CreativeTechos
Жыл бұрын
My pleasure, Appreciating for showing support
A ponte retificadora pode ser aquelas de fonte atx?
🎉Wow magic!
Thank you for sharing this video really inspirational
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
Gracia por compartir tu conocimiento, Dios te bendiga. Podría utilizar un transformador 12v-0v-12v
@CreativeTechos
Жыл бұрын
Thanks for watching 🙂
@_INDIA-
3 ай бұрын
Have to use 30v capistor cause its deliver 27v output
Really good that no mains fuse is used in the input, Bang. What happens if the two welding probes weld to the battery, no way of disconnecting? Smoke!!!!
Excellent!!!
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
How do I order for the PCBs. The description wasn’t clear. Would appreciate if the link is forwarded. Thanks.
EXELENT
Very simple gob job..i Like sport welder u friend smple 👍👍👍⭐⭐⭐⭐⭐
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
Спасибо большое за видео класний чокий ясно
@CreativeTechos
Жыл бұрын
Thanks for watching my friend, new powerful version of spot welder coming tomorrow, don't forget to watch it.
you need to widen the holes on the gerber file for the bridge rectifier they're too small
Please I have made one at home but it can work the way it supposed to be, please can you help out?
Good job,💪👏
@CreativeTechos
Жыл бұрын
Thank you! Cheers!
hi! Why is there a 1n5408 diode? Isn't it redundant...?
Hello Sir, I want to clear a doubt that can we use a timer delay module to get the right amount of spark needed for spot welding. Please answer I am making this spot welding machine.
boleh ini nanti di coba
Cool video project!
@CreativeTechos
Жыл бұрын
Thank you! Cheers!
good job my friend, succes for you
@CreativeTechos
Жыл бұрын
Thanks for watching 🙂
Good
could use a 15.5 / 0 / 15.5 Transformer ??
buenas mi hermano como estas, me gusta tu proyecto pero tengo una pregunta perdona mi ignorancia ese diodo que colocaste de salida negativa de los filtros y lo colocaste a la salida negativa del cuadro de diodos que función hace porfa 👍👍
@CreativeTechos
Жыл бұрын
The diode i used on mosfets with reverse polarity, is actually a Recovery diode, that protects the mosfets from burning by continue turning on, with diode it discharges the fets and switchs them back to off position, when there is no pwm signal from 555 ic to gate of mosfets.
Nice video, thanks :)
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
SUPER ❗️👍💪🤝✌️💰👑🚀🛸
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
Great
@CreativeTechos
Жыл бұрын
Thanks for watching 🙂
What is the input power source to transformer?
I heartly say very very thanks to u for this video.This is a special video for me as I had told u some months ago to make this spot welder..I see and like your every videos... Love from jharkhand..❤👍 Dr. Deepak kumar
@CreativeTechos
Жыл бұрын
Thanks for appreciating, Thanks for watching 🙂
Transfomer 9v 0 9v 5VA can use for this spot weld...? Sorry i newbie...😅
Is the power supply source 9v AC?
merci beaucoup
@CreativeTechos
8 ай бұрын
My pleasure, Thanks for watching 👍
A sondagem ficou excelente! Parabéns.. Como é o transformador que você utilizou?
@nitroboom1282
Жыл бұрын
It might be a 240vac to 12 or 24v ac transformer
@viktorsolodovnikov1290
Жыл бұрын
@@nitroboom1282 к
Good 👍
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
Sir what wiil input the 220 volt current into trnasformer
Sir can I make bridge rectifier using 1n4007 diode ?
Muito bom.
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
@KhuongNguyen-sk3nz
Жыл бұрын
Timjllll
Genial
Brother very nice
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
can I use a 12-0-12 Transformer?
If i use 4700uf 50v capacitor?? Is it going to work?
It is very useful and amazing video but need to specify transformer capacity ie 1amp or 2 amp required. Can i use KBL10- bridge rectifier DIODE 4A instead of kbp 307 bridge rectifier ? Thank you sir so much.
@CreativeTechos
Жыл бұрын
You can use any bridge rectifier above 1A, and transformer max 12v 1A, and more capacitor will weld more stong, but for professional and strong welding check out this new spot welder kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
so nice video
@CreativeTechos
11 ай бұрын
Many many thanks
How many amps is the transformer?
Super
@CreativeTechos
Жыл бұрын
This spot welder is for just home hack to spot weld not in professional applications. Check out this tutorial video of new version spot welder for professional and strong welding using 555ic kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
Sài 12v - 12v được không vậy bạn
Try to put fuse in input of tranpormer for protection of transpormer
Da para por umz ponta de tungstênio no positiva
sáng tạo đó bạn mình
@CreativeTechos
Жыл бұрын
👍
Can i use 35 v 4700uf capacitor
I connected the device according to your instructions, but it does not generate enough spark to puncture the battery strip. I put in parallel another such set of 4 capacitors of 6800 micro farads each and the device still cannot break through the tape and not make contact between the tape and the battery.
Very clear and simple, now I can make my own spot welding machine.
@CreativeTechos
Жыл бұрын
You may also would like to check out this spot welder with more strong and professional welding kzread.info/dash/bejne/Y5lozrGDldSnk5s.html
@juhbabah
Жыл бұрын
@@CreativeTechos Ok, thanks.
@CreativeTechos
Жыл бұрын
My pleasure, Thanks for watching 🙂
@kalpeshakbari
Жыл бұрын
Can sale you
@cesararevalo4045
Жыл бұрын
@@CreativeTechos a as
So I have the project built up with a 9-0-9 3000mA Max and four 6800uF caps, rest to spec. It just blows holes through the nickel strip, any suggestions?
@AviAero123
5 ай бұрын
Hi, I was about to begin making this. But stopped to scroll through the comments. Could you explain your plight? Did you use exactly the same components and how long did you short to get holes in the strip?
@DavidRobertLewis
5 ай бұрын
@@AviAero123 9-0-9 3000mA Max and four 6800uF caps. The minute the probes short on the nickel strip, the result knocks a small hole through the strip. I must have too many Amps?
Alguien sabe si me silve 6800uf x 50v ???
Can I use a 12v transformer?
Bridge rectifier KY - ko capacitor KY + say jorna hoga am I right
Can it welding Lipo4 32650
What're the specs of transformer? I know it's a 9v but what amperage it's rated for?
@CreativeTechos
Жыл бұрын
Use 1A 9-0-9 transformer
If KBP-307 rectifier bridge is not available in market then it is better to specify the alternative.
@alimughal7258
9 ай бұрын
Same question
How many amps is that transformer you used sir?
Please check the design again because in practical capacitors position are different & in 3D animation that position is different so please confirm it if I'm wrong
Please tell me transformer should me how much volt watt and ampere required
Interesting and nicely done, but soldering is not soldering, but pasting. Solder needs time to flow. With 'paste' you get bad connections.
I want try that.
@CreativeTechos
Жыл бұрын
Yes sure, you can make it it works 100%, Also you if you would like to check another spot welder with strong & professional welding kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
I used 4x 6800uf 35v capacitor, Kbp307 rectifier, 12 0 12v 750amps transformer, 1N5408 diode..it only blows hole and no weld..any suggestion to make good weld.?
@AviAero123
5 ай бұрын
Hi, I was about to begin making this. But stopped to scroll through the comments. Could you explain your plight? Did you use exactly the same components and how long did you short to get holes in the strip?
Can I use capacitor 6800uf 50 volts with 9-0-9 2Amp transformer
@CreativeTechos
Жыл бұрын
Yes, you can use, Also you may would like to check out this new spot welder with strong and professional welding kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
What size rectifier is it? bought 4 boards so waiting to build it up.
@CreativeTechos
9 ай бұрын
6A, KBL608
how many ampere transformer do you use ?
👍👍👍
@CreativeTechos
Жыл бұрын
Thanks for watching my friend 🙂
Hi. Nice video. Can i put a dc breaker right after the transformer? If so what amp shoukd i use?😊
@CreativeTechos
7 ай бұрын
For what purpose you want to add breaker
@andrenbalajadia4102
7 ай бұрын
In case the probes got welded? I dont have any idea i just wanted to add extra caution? Thanks for your answer.
What is the function of the D2 diode? Transformer what power?
@CreativeTechos
Жыл бұрын
D2 1N5408 General purpose Diode is there for pass through to protect bridge Rectifier from fusing. 9-0-9 transformer can be used from 1-2 A
Guide me please Can I use a diode bridge rectifier instead of using this rectifier?
@CreativeTechos
9 ай бұрын
Yes you can make rectifier using diodes.
Is welding quality strong enough sir? Transormer is 5amp , rigth? It seems nice job...
@CreativeTechos
Жыл бұрын
Actually transformer you should use is 1-2A max and works perfectly and welds well. You may also would like to check out this spot welder with more strong and professional welding kzread.info/dash/bejne/Y5lozrGDldSnk5s.html
@qurmans
Жыл бұрын
@@CreativeTechos thanks so much...
@CreativeTechos
Жыл бұрын
My pleasure Thanks for watching 🙂
Very professional work, Thanks my friend, Big like
@CreativeTechos
Жыл бұрын
Thanks for watching 🙂
1 this approach needs powerful thyristor for commutating capacitors in moment of welding to avoid sparkles and make welding of better quality. 2 you should pull off stripe by plyers until stripe will rip off from battery. If spots of welding will stay on battery can - then it's quality welding. Otherwise - no.
est-ce que vos composantes peuvent marcher car au Québec,notre courant est de 120volts et 60HZ.
@CreativeTechos
Жыл бұрын
Then you need to buy transformer accordingly 120v to 9-0-9v step down, rest same components can be used. You also may like to check out this new 12v spot welder video with strong and professional welding. kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
Can i use 25v 6800uf capacitor instead of 35v 6800uf? Please reply i need know
@harunaltunde5728
Жыл бұрын
Yes as far as the transformer output voltage doesn't exceed 25v
Sir can use capacitor 25v 1000uf? And can use 1 only capacitor or need 4 capacitor?
@CreativeTechos
Жыл бұрын
1000uf capacitor us not enough to make welds. You need to use higher uf capacitors with less voltage for best welds
very clear bro, plz add diagram
@CreativeTechos
Жыл бұрын
Circuit Diagram & PCB Layout files can be downloaded from video description.
Can we use 5000uf ,50 volt capacitor in this, And transforer 12-0-12 ?
@CreativeTechos
Жыл бұрын
Yes, you can use i used 9-0-9 v transformer because capacitors spot welders perform better with lower voltage but higher capacitance, so that it will store higher current with low voltage. You may also would like to check out this spot welder with strong and professional welding. kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
@michaelpinch724
Жыл бұрын
@@CreativeTechos can I use different voltage and different capacitance?
bos anong name n pwde mag buy pbc board
Hevy machine bnana ho to kya chanjis hoge
what is the spacifications of the bridge rectifier? model no please
@CreativeTechos
Жыл бұрын
KBP307 3A bridge rectifier, you may also like this new spot welder with strong and professional welding. kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
If you short the caps for a long time then what may happen?
@CreativeTechos
Жыл бұрын
Nothing can happen to capacitors, but transformer will get heatup due to over load
Can i replace rectifier KBP307 to another?
@CreativeTechos
Жыл бұрын
Yes you can replace it with 2A & higher. Also you may check out this spot welder with more strong and professional welding kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
Can we use 12-0 v transformer instead of 9-0-9v transformer as you have used
@MrShahab1977
Жыл бұрын
I meant 12-0v 1A transformer instead of 9-0-0v transformer
12 0 12 transformer be laga sak tha ha ya ne
cách làm mỏ hàn chập thú vị
@CreativeTechos
Жыл бұрын
Upload already instant heating soldering iron, you may check that out.
hi brother . I just made one now with 4x 6800 uf 50v capacitors and 12012v 50va transformer and 4 x 6A10 diode bridge . I have also added one more 6A10 diode diode for the protection . I used 1 5mm LED with 1k ohm resistance 1w . It is making good spark and spot welding fine. But the LED is not lighting up . Could tell me where the problem might be. Thanks.
@d.jensen5153
9 ай бұрын
Wrong polarity? Reverse the LED.
@mohammadmujammil5584
3 күн бұрын
Can u share guide or video?
Thanks for sharing.. After testing this method all i got was scratches on the surface (of nickel strip with 0.15 mm thickness). I used 6 capacitors 35 v and 4700mf. If you looking for a mini spot welding machine for your project, this one will not give you any progress at all.
@CreativeTechos
Жыл бұрын
Thos spot welder will work well when using minimum 4x 6800 uf caps, also both probs should not short on nickle strip, one should on surface of cell and another on nickle strip, link i done in video, also this spot welder is just for minimal welding. If you want professional diy spot welder with strong welds check out this new spot welder circuit. kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
What other Capacitors can be used, I can't get 6800uF in my country
@CreativeTechos
Жыл бұрын
You can use higher uf capacitors, if available use 1 Farad capacitor with 2-5 volts. It will perform better, Also if you would like to make professional spot welder for daily use with strong welding check out this video kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
@kezzkezzkezz
Жыл бұрын
@@CreativeTechos would the 1 Farad still fit the designed PCB you made? I received them from jlcpcb
@CreativeTechos
Жыл бұрын
If you've got your PCB than same size capacitor must be used. 1 Farad will be bigger.
@kezzkezzkezz
Жыл бұрын
@@CreativeTechos the only way for me to get 6800uF is china and they won't arrive till end of November same as the bridge rectifier
@CreativeTechos
Жыл бұрын
Then make this spot welder it is better & professional for daily use. kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
Hello. Can i use greater capacity condensator?
@CreativeTechos
Жыл бұрын
Yes, higher capacitance with lower voltage better & strong welding. Also you may would like to check out this spot welder with strong and professional welding. kzread.info/dash/bejne/mX16t9dmXdW8dpc.html
@Sandokans
Жыл бұрын
@@CreativeTechos Yes i allready saw that video ..thx
@CreativeTechos
Жыл бұрын
Thanks for watching 🙂