Better yet, my wife bought me the laser and said, you'll figure it out. And darned if she wasn't right. Lol

@BuildDadBuild

2 жыл бұрын

Right on! Cheers

That lube can be found at auto stores, hobby shops, and some gun shops may have it. Amazon is great, but always try to buy local. Great info by the way brother, keep it up

Great video thank you. I saw another video where he lit a candle under the metal and it was coated with the black soot which worked great and easy to wipe off.

Thanks for the shout out! Always enjoy your content and also always get a kick out of it when my stuff is useful to someone.

@BuildDadBuild

2 жыл бұрын

Cheers, brother! Love your content.

Awesome video. Love my ortur master 2 but I’m getting a 80W fiber to get into some serious metal art and deep engraving. Uncoated stainless steel hip flask is definitely on the going fast list

Dude I have been watching your vids all day.. my Xtool D1 should be here Momday so by next Friday I should have something ready to show..we shall see if my 3rd grade edumaction pays off or not. Keep up the great work!

@BuildDadBuild

2 жыл бұрын

The learning curve is pretty easy for the D1! Good luck and happy laserin'! Cheers

Thanks for helping me with my xtool the other day. You Rock

@BuildDadBuild

2 жыл бұрын

Sure thing, Niki! Cheers

Another great video fellah!

@BuildDadBuild

2 жыл бұрын

Thanks, Brent! Cheers

For those who don't to use thinner at all because of the fumes on the stainless steel, use alcohol it comes right off and for the fun of it, I tried with Dominican Rum, works like charm 😀. Thank you for another video!

@BuildDadBuild

2 жыл бұрын

Good to know! Cheers

@michaeldewild718

2 жыл бұрын

That's alcohol abuse...LoL

@marcoss6212

2 жыл бұрын

@@michaeldewild718 I like to work with rum, sometime i use with the laser.

@jesusadames1130

2 жыл бұрын

Dominican rum is the best..Brugal

@marcoss6212

2 жыл бұрын

@@jesusadames1130 Couple of decades ago or maybe longer, the best used to be Barceló Añejo, yes Brugal is King!

Thanks for another awesome and informative video! Rock on

@BuildDadBuild

2 жыл бұрын

Thanks, Bryan!

@zmaynez12maynez93

Жыл бұрын

I’m having problems with the stainless what are the setting for the stainless steel

My Xtool D1 and first set of flasks arrived today. Setup was as quick & painless, and your walkthrough made it easy. Thanks for all the hints!

@BuildDadBuild

2 жыл бұрын

You're welcome! Cheers!

@mariewood8267

2 жыл бұрын

did it come with lightburn?

Thanks for all your videos, my D1 will be here on the Feb. 1st!

@BuildDadBuild

2 жыл бұрын

That's awesome, Mike! You'll dig it! Cheers

@TakeThePTO

2 жыл бұрын

@@BuildDadBuild Three ish weeks since I got my D1 and maaaaan! I've used it everyday and almost have it paid for. Whats your take on the 20watt??

The sound when you test fire the Ortur laser and it engraved the line😂

great ideal, good job

@BuildDadBuild

2 жыл бұрын

Thank you! Cheers!

Could you do a video on cutting Kaizen foam with the X1. Not much out there on this topic, but would be incredibly useful for making custom Pelican cases / tool organization. Thanks. Love the channel!

@BuildDadBuild

2 жыл бұрын

I think you'd run into a thickness issue. You'd only be able to get about 10mm before the laser focus would be off... Cheers

Hey...I just wanted to thank you. As i am new to laser engraving i was wanting to do tublers and everyone i found suggest a spray for stainless steal a blacken spray that cost a small fortune. Thanks to you i am now engraving tumblers. 2 videos and 3 experiments later im engraving and believe me...if you can teach me tech you can teach pigs to write a book 🤷‍♂️

@BuildDadBuild

8 ай бұрын

Thanks!

Hey ! I found that same moly lube at my local Grainger ! Keep on etching !

@BuildDadBuild

2 жыл бұрын

Awesome. Never thought of looking at Grainger. Cheers

I found the dry moly lube at my local NAPA store. Just an fyi. Love this Channel!!!

@BuildDadBuild

2 жыл бұрын

Thanks Jess!

awesome video,,,, You just got another subscriber I have the Ortur LM2

@BuildDadBuild

2 жыл бұрын

Sweet! And welcome! Cheers

Just curious why you didn’t use the xtool to etch or engrave the stainless steel flask? I’m trying to engrave stainless steel charms about 1-2” rounds but when I process it they come out very pale and a little bluish would my settings be off?

@BuildDadBuild

2 жыл бұрын

I was just trying to show different lasers in use. Normally I engrave all my stainless on the D1. Cheers

First off, been enjoying your Chanel. 2nd, what were your final settings on power and speed? I grabbed some of the Moly Lube but my burns are not that dark when finished. Thanks for any help

@BuildDadBuild

Жыл бұрын

I think I was running the stainless steel settings, but not positive

Highly recommend the Enduramark Blu spray for cleaning the coated metal after engraving. Quick, easy, and shiny results. (I'm not affiliated or have any interest in the company. Just sharing what I've found that works.)

@BuildDadBuild

2 жыл бұрын

Funny....Enduramark just sent me out some products to try! Cheers

@cynthiasparks7545

2 жыл бұрын

@@BuildDadBuild have your tried the enduramark laser spray on the stainless steel using the D1? I tried dry moly but limited (think I need thicker coat)

@BuildDadBuild

2 жыл бұрын

@@cynthiasparks7545 Yup. Works great! Try promo code BUILDDADBUILD for 20% off

Hello I have a question. I'm hoping you would have an answer to. So I will have the M1 by Xtool. Do you think this method your doing will work with the M1? Thanks Shar

@BuildDadBuild

2 жыл бұрын

It should. It’s a 10 watt diode laser. That being said I do not have the M1, so I can’t say for sure. Cheers

Awesome content mate keep it up. Do you run air assist and how often do you clean the head? I’m running a 20w D1 pro, just starting out but having a great time with it

@BuildDadBuild

9 ай бұрын

Always run air assist. Clean to unit weekly.

what size diode did you use on the last stainless engrave and at what power and speed, that would be great info, thank you.

@BuildDadBuild

2 жыл бұрын

10w. Stainless Steel settings.

Heya. I am having trouble finding crc dry moly local. Can I use another coating for regular stainless steel?

@BuildDadBuild

2 жыл бұрын

I'm not sure. At least that's not expensive! Try tractor supply places, auto parts stores, and boat places...

So what are the settings for the Ortur you would recommend for the stainless steal? Great video thank you....

@BuildDadBuild

Жыл бұрын

You’d have to run. Speed and power grid.

So the end result looked great on the stainless. You swapped lasers. My question, can the Aufero Laser 2 do that also. I was so interested in the result but a different laser was used in the end. Thanks!

@BuildDadBuild

2 жыл бұрын

You could get a similar result with the Aufero...it would just take a little longer. Cheers

@scubasteven9

Жыл бұрын

@@BuildDadBuild Thank you; i was thinking the same question!

Awesome videos. You should get the M1, since it is the one with the least videos. Been trying to apply some of your videos techniques to the M1 laser. How you cleaned the dry moly lube? Can you use Dry moly lube on tumblers?

@BuildDadBuild

Жыл бұрын

I love the M1. I honestly just haven't had enough time to play with it. I clean the dry moly with acetone. And yes you can use dry moly on tumblers. Cheers!

@samuelsanchez6180

Жыл бұрын

@@BuildDadBuild Thank you for the info. Keep those videos coming :-)

Love the blooper lol

@BuildDadBuild

2 жыл бұрын

LOL

I have noticed on my d1 that when I position the cross and frame my image or text it shows correctly for my project but when it burns it's always off to the right never dead on like you show, why is that? Thanks again for your help.

@BuildDadBuild

2 жыл бұрын

I feel like that had something to do with a software update. Check out your version. If you're running anything over V 1.2.0 unistall and reinstall the stable version: support.xtool.com/hc/en-us/articles/4408889202199-Software-for-xTool-D1 Cheers

Hi I am a new beginner so excuse me for the noob question, but I thought the xtool D1 runs on either lightburn or Xtool creative space software, but I like what you are using it seems simple. Can you use Laserbox as a control sowftare, or just design and then import it to Xtool creative space é lightburn? Thank you!

@BuildDadBuild

Жыл бұрын

Laserbox Basic is no longer viable.

Sorry if this has been asked, but what did you clean the stainless with after engraving?

@BuildDadBuild

Жыл бұрын

Lacquer Thinner

What process did you use to make the stainless steel flask dark as black.. you did not tell.. is this cermark ?

@BuildDadBuild

2 жыл бұрын

Enduramark

Yo this is absolutely amazing! I just got a 10w laser, I'm trying to engrave enameled bottles for my friends. Do you have recommended settings for power and speed?

@BuildDadBuild

Жыл бұрын

I am not familiar with that material. I’d have to run a power grid.

@AlmostCool_

Жыл бұрын

@@BuildDadBuild pretty grid?

Thank you for the video. I know this is not a latest video, but I do go back and forth to it for reference. Do you have an ideal setting for speed and pwer to start with for Atomstack A5 pRO, 10OZ STAINLESS Steel Flask.

@BuildDadBuild

Жыл бұрын

I don't. I don't use atomstack's products.

@Gmailjames1

Жыл бұрын

@@BuildDadBuild do you have anyone that can assist with providing information as such. Not being funny but many people starting out are using Atomstack because of the starting prices and there is a big environment out there that would like the same information.

With lightburn xtool 20 w D1 pro , speed 1800 power 50 ? thank

Thanks, but what were the settings on the D1 for the stainless? and was it a 20w D1?

@BuildDadBuild

Жыл бұрын

The 10W. and this was over a year ago, I don’t recall the settings.

Dang lazers! I'm still mastering the wood CNC... ;) But I got Bourbon... :)

@BuildDadBuild

2 жыл бұрын

That's all that matters...LOL

@Qthekat1984

2 жыл бұрын

@@BuildDadBuild Cheers!

First off great video. I noticed when marking my SS flask that the area marked has a little bit of warping to the steel. I tried it again with the flask filled with water and there was a lot of popping and fizzing but it came out the same and no warping. Any reason I should not do this?

@BuildDadBuild

Жыл бұрын

Not that I know of.

Do you prefer the results with Eduramark or Dry Moly most? I see the Enduramark is more expensive but less prep work and Dry Moly is more prep but much less expensive.

@BuildDadBuild

2 жыл бұрын

Enduramark. Hands down. The time it saves is worth the money. If you want to check it out use Promo Code: BuildDadBuild for 20% off all products Cheers

What did you use to clean the stainless with the moly lub? Thanks

@BuildDadBuild

2 жыл бұрын

Hey Mike! I used lacquer thinner. Cheers

Will the X1 do the stainless also? Curious why you used the other laser.

@BuildDadBuild

2 жыл бұрын

The other laser was available. LOL The D1 definitely marks stainless. Cheers

Where do we find the grid you had there? Awesome video

@BuildDadBuild

2 жыл бұрын

There's a few different grids in this folder. drive.google.com/drive/folders/10Opcir8qNVQ54swBGGp7Ua4gEKTrFa3Y?usp=sharing Cheers

Can you use these to cut foam? Or would it just melt? I have a foam cutting table, but if you could use this to cut out shapes from foam to frame items, that would be pretty neat-oh.

@BuildDadBuild

Жыл бұрын

I haven't personally do it, but I know you can cut EVA foam. Cheers

@teslal.davidson8222

Жыл бұрын

@@BuildDadBuild Alrighty. Well i think i’ll give it a try when my unit arrives, if It works i’ll reply again. Thanks for answering

@Martina1192

Жыл бұрын

@@teslal.davidson8222so, did it work?? :)

Can I do the same engraving with my XTool M1? I am learning how to use it. I am looking to engrave flask for Xmas gifts.

@BuildDadBuild

Жыл бұрын

Don't see why not.

What were your settings? I'm using lightburn with Atomstack A5 M50. Oh ya, I'm a rookie at this.

I urge you to never take the guard off and then point the laser at something shiny, great way to destroy your eyes. Aside from that great video.

Could you do a stainless with the frist machine? To see the difference in the 2 machines. I bought the frist machine and I’m curious. I really enjoy you videos.

@BuildDadBuild

2 жыл бұрын

Which machine are you referring to? The Aufero or the xTool D1?

I am wondering why flat black spray paint is not used? Would be easily removable with acetone?b I've got to think that was tried at some point

@BuildDadBuild

Жыл бұрын

Try it! 👍🏻

@diggumsmack2

Жыл бұрын

@@BuildDadBuild I'm new to the laser world, just bought my first, one and only so far, laserpecker2 last week. My comment wasn't meant to sound "know it all" but I see those laser sprays are expensive and as for the moly spray, I'm not familiar with it. Does spray paint work? Sorry for the newb question as maybe this is a known to experienced laser jockeys.

what settings did you use for coated (black) and stainless flask?

@BuildDadBuild

Жыл бұрын

Painted Metal settings in Laserbox

What was your settings for the stainless flask ?

@BuildDadBuild

Жыл бұрын

If I don’t say it in the video I don’t remember. That was like 2 years ago. I’d suggest running a speed and power grid.

With the D1, what were the settings you used? I keep having the dry moly remove after engraving. Thank you for your time.

@BuildDadBuild

2 жыл бұрын

The settings for stainless steel Cheers

@daisgu

2 жыл бұрын

@@BuildDadBuild it happened to me too, even in the stainless steel settings. I will try with more layers of moly🤞

@mariewood8267

2 жыл бұрын

@@daisgu so how did it go?

@daisgu

2 жыл бұрын

@@mariewood8267 it was my mistake. It does works as he shows. The portion I tried to do was aluminum. (It never occurred to me it had some parts of stainless steel, like the rim and bottom portion, and some aluminum)

@malibu1969

Жыл бұрын

@@BuildDadBuild Have you run this process with LightBurn? I'm having an issue with the 30oz Yeti Stainless Steel tumbler. Dry moly (with some work) rubs off after marking. I've tried 500mm/min @100% and even 180mm/min @100% and same results. Pointers?

Just got my Xtool D1 and I am fresh out the water.

I’ve tried using rust-oleum white and galva zink both came out a really faded mark does dry molly make a difference?

@BuildDadBuild

2 жыл бұрын

Dry Moly for the win with stainless....I tried cold galvanizing compound and got so so results. Cheers

@Jack_Orville_Trades1

2 жыл бұрын

👍🏻 thanks

YOU should get S30 pro with the automatic air assist .

Does anyone know a dry moly lube alternate? I am over in Japan and sadly the stuff costs $80 for one spray can 😭

I am currently trying to build the MK II injection molding maching that buster beagle had on his channel.

@BuildDadBuild

2 жыл бұрын

Sweet

You're engraving time was faster than actual time. My first one estimated time was 11 minutes and real time is a couple hours. Do I have an issue? Also, yours look completely black until cleaned and mine just need a few wipes to clean it up. Any suggestions would be appreciated.

@BuildDadBuild

2 жыл бұрын

Engraving time is going to vary from image to image. The time estimate is never right! Cheers

What machine did you use for this? Looking to invest

@BuildDadBuild

Жыл бұрын

xTool D1

1st time getting a laser engraver i got a Latitool F50 we are also using laser GRBL been watching your videos and trying to figure ours out lol they cant be to much difference any tips on what to use like have u ever tried laserGRBL or used a latitool engraver any kind of help would be great thank you very much

@BuildDadBuild

Жыл бұрын

Sorry. Was never a fan of l laserGRBL so I never used it.

@kaseymenzel3546

Жыл бұрын

@@BuildDadBuild ok thank you like I said im new so what do you use i tried lightburn but was lost what program do you use sorry for all the questions

@BuildDadBuild

Жыл бұрын

I use Lightburn. There’s a beginner setting that makes it less intimidating

You have clap button cover fantastic....stl file?

Seeing that it takes like 20 mins for the coated one, how much do you charge for a flask? If you don’t mind.

@BuildDadBuild

10 ай бұрын

I don't sell them.

@lunatic231

10 ай бұрын

@@BuildDadBuild I understand. Well done again.

Don't forget to factor in the sales taxes that you paid, it is part of your overhead/costs. And your tests are business losses, so they're tax deductible.

What setting used? Thanks good video

@BuildDadBuild

Жыл бұрын

Coated metal for the coated one and Stainless Steel for the other.

@hooked_fish

Жыл бұрын

@@BuildDadBuild 100 power ? 50 speed / 200mpi?

I love my coated metal flasks from Amazon.

@BuildDadBuild

2 жыл бұрын

Yeah! Great deal, right? Cheers

does the xTool D1 come with Lightburn software?

@BuildDadBuild

2 жыл бұрын

It does not come with it. You need to purchase Lightburn separately (after the 30 day free trial)

@mariewood8267

2 жыл бұрын

@@BuildDadBuild do you have a link for Lightburn?

Hey man, its me again :-) I did both of the flash, the black and the stainless steel. Did you face that too, that you get bumps and dents in the stainless steel flasks?I dont know if this happens because i didnt engrave it with the clasp open, so maybe it happens from the heated air in!? i really dont know, but the black coated ones came out fan-fucking-tastic

@BuildDadBuild

2 жыл бұрын

No bumps or dents in mine. Not sure what would cause that. Cheers

Have you tried wd40 ptfe dry lube? I wonder if it works. I can't find dry moly near me and it appears to be sold out on Amazon.

@johnrichmond29

2 жыл бұрын

Just looked and it’s $14 a can on Amazon…

@jameswitter2055

2 жыл бұрын

Not sure about your local store but I did find it at my local oreillys

@BuildDadBuild

2 жыл бұрын

It's my understanding that auto parts stores carry it.

@cynthiasparks7545

2 жыл бұрын

I found mine at a grainger and Napa, only places near me that Carried it in stock

Do you have to trace the png to get the laser to cut it?

@BuildDadBuild

Жыл бұрын

Not necessarily. Depends on the design. Speed and power are what is going to determine if you cut or engrave.

@kimberlydukes-frink6268

Жыл бұрын

Thank you for responding

Is there anyway that I can send you a picture of my engraved flask?

Just bought this laser engraver. Never done this kind of stuff in my life. Wish me luck lol.

@BuildDadBuild

2 жыл бұрын

Good luck, brother! Cheers! Also check out their Facebook group: facebook.com/groups/xtoold1

@StephanLamar81

2 жыл бұрын

@@BuildDadBuild thanks. I will

@colourmein1425

2 жыл бұрын

@@StephanLamar81 how’s it going with your new laser

@StephanLamar81

2 жыл бұрын

@@colourmein1425 I’ve used it 5 times so far, 3 failed projects, 2 successful. User error. Waiting on cold galvanizing compound to try and etch on glass. I like it so far.

So the ending the stainless was the d1 with a 10 watt laser?

@BuildDadBuild

Жыл бұрын

yes

@coffence

Жыл бұрын

@@BuildDadBuild thanks for reply sir. I may bug you for more pointers. I just purchased the xtool d1 10 watt and not sure what it is capable of.

Can you engrave on a full liquor bottle ? Or an unopened Soda can ?

@BuildDadBuild

2 жыл бұрын

Sure can!

“I never dreamed about success. I worked for it.” -Estée Lauder

@BuildDadBuild

2 жыл бұрын

Exactly!

Have you ever had your stainless steel flask dent where you engraved?

@BuildDadBuild

Жыл бұрын

No.

I think my laser is too weak. I tried 3 times and no luck. 5 watt diode @ 900 mm/min 80 % power X2 no luck Am I beating a dead horse?

@BuildDadBuild

2 жыл бұрын

I don't think so. I'm running 100% at 12mm/s (so 720 mm/min). I think you're moving too fast.

sometimes when I do insulated water bottles, the laser etched part doesn't come out silver. The exact settings on one bottle may result in nice results and other times it looks like there still a tiny bit of paint left. Any advice? I'm at 100% at 2.75 in/sec at 260 lines/in on a 10 W diode.

@BuildDadBuild

2 жыл бұрын

It might just be the color of the paint. They all react differently. And when you get closer to a blue color you'll notice discrepancies due to the color of the beam of the laser.

@forbiddendonut

2 жыл бұрын

@@BuildDadBuild Ah! That makes sense. Thank you so much. BTW, you are a crack up.

Have you tried to laser engrave on slate coasters?

@BuildDadBuild

2 жыл бұрын

Yes. Works awesome! Cheers

@ironmandan74

2 жыл бұрын

@@BuildDadBuild Awesome. My Xtool D1 is on its way as we speak.

If that flask is kind of a parody than that means you can sell it without copyrights? xD Because the parody should be copyright free :P

@BuildDadBuild

2 жыл бұрын

Yes and no. The Halloween one is not my artwork. However I did purchase it for use. Cheers

Have you ever done any pew pew parts and would you ever do a video on it thank you

@BuildDadBuild

2 жыл бұрын

I have not. In order to mark pews you need your FFL. Cheers

@nicholasweseman9704

2 жыл бұрын

Or other parts that you don't need a license, uppers or buffer tubes with the same coating on it thank you buddy

@BuildDadBuild

2 жыл бұрын

@@nicholasweseman9704 I have not.

You can also cut out the feet with the laser.

@BuildDadBuild

2 жыл бұрын

Yup... figured that one out after the video! LOL

Isn't it easier to center by cutting outline in the paper and just position the object in that outline and than remove the outline from laser layer and boom your have centerest object to every mm.

@BuildDadBuild

Жыл бұрын

You do you, homie! 👍🏻👍🏻

@chrissre7935

Жыл бұрын

​@@BuildDadBuild Sure Everyone has it's own style :) Still have to learn a lot and you provide excellent content. Keep growing.

Hmmmm. I could use a flask for wine 🍷.

@BuildDadBuild

2 жыл бұрын

Hmmmm....wine flask?

I guess I'm a long way down in the comments now, But .... Does anyone in the UK have either an alternative to the Dry Moly, or a source that isn't costing £70 for a tin?.

@BuildDadBuild

Жыл бұрын

I don’t hVe a good alternative to you…sorry brother.

FYI: I was going to subscribe to your channel but there are way too many Shorts. I hate those in my subscription feed. No hard feelings, just thought you might like to know that some people despise Shorts.

@BuildDadBuild

2 жыл бұрын

I understand. Unfortunately KZread is really trying to push that format and is after creators to make more of them. Cheers