This is amazing and looks so fun ! Great job dude ! Very Inspiring ! You are like the coolest dad ever !

@katiarepublic7057

5 жыл бұрын

Triforce Matter i second that!

dooode this is coming out great! can't wait to see part 2 and the finished product. hope you and the family are doing well, thank you for taking the time to teach us!

Have you considered making an etsy store for these projects? You would definitely get a ton of people requesting these products from you! Wonderfully crafted and well made.

this is the coolest thing I've seen anyone make from wood. amazing dude, just amazing.

For the Brass Work detail, you may find a material called Worbla super useful. It's not too expensive and super easy to work with, you just need a heat gun. It acts like a plastic once cool, put when heated, it becomes more like a clay, and is super useful for fine detail work on pieces like these! I'd highly recommend investing in it!

I've waited one million years for a new video from you. This is a gift from the woodwork gods themselves, thank you sire, I shall feed for now.

Just so you know that kind of fabric is called crushed panne. Just thought I would share. It can be helpful to know. ^-^ It's also very good for making cloaks.

Always the best projects!

can't wait for part 2

Hey Adam, I have been subscribed for a while, and I think you do a great job, and you're really awesome. Keep up the good work!

Great video! I'm planning on making something similar for my younger brother, and learned a few techniques from this. A little tip to help the CA glue (super glue) dry: Use CA glue activator spray. It'll make it stick immediately, and make putting those small pieces on a lot easier and faster.

Amazing dude! im loving these projects! wish I had your skills , keep up the good work!

Nice to see a new video on your channel. Thanks !

The rings video was you?! And now this? Amazing. Thank you for your contributions and sharing

This is amazing, so perfect

You are a saint for doing all these free templates!!!! Makes cosplaying so much easier!!!!

@thechloecorner

2 жыл бұрын

@Jack Page the patterns are in the description of the video. Google drive link

@gedaliahdimbert8712

Жыл бұрын

@@thechloecorner But it isn't accessible, right?

You should try to make the Majoras Mask!

I've been waiting for your next video for so long.

You definitely make more videos, I love Zelda and have even made props myself

you are very good at doing things wow!

that is the most beautiful thing ever

Iv'e been waiting so long I almost forgot I was subscribed to you... Looking forward to your next project I hope it turns out great!

@uiomancannot7931

7 жыл бұрын

I forgot who this person was too. glad I remembered. :P

already excited 5 seconds in

Hey Atom, I'm making the Lokomo sword from Spirit Tracks, but since I don't have every power tool in my arsenal I'm thinking of making it modularly: cut out the blade, then the guard design, then the handle then the pommel. what would you recommend I do so I can have a stable sword and not have it fall apart? thanks

Can you do a video on the Windwaker shield? That would be so cool!

Muy buen trabajo!!!

HappyAtom! from 44:00 I noticed you have a cool awesome black sword resting on your wall, can you tell the story behind it and what it's name?

"... I'm just going to sand this down." > *proceeds to cut it off*

Amazing!!

dude this is sick, do you have the sword tutorial

I have been waiting for sooooooooooooooooooooooooooooooooooooooo long for your next video come out. Ur awesome keep it up 😜👍

Did you try wood bring the too design on the wood instead of burning another peice then cutting out?

good job

he is good at makein zelda stuff and link stuff

I like all of your videos but i didn't get to make the master because it requires more power tool.i am waiting for your next superb video

@HappyAtom

7 жыл бұрын

Thanks.

Muito bom!!!! parabéns!!!

عمل ممتاز تحياتي لك من تطوان المغرب

It seems like your template isn't available; can you please change the sharing settings?

@joseeduardoarocarojas4329

Жыл бұрын

I also need the templates.

Happy Atom, can you sell a pre cut-out pieces for us who can't cut

this will be grate fir my link cosplay

cool!

By the way, that V shape is for the jewel in the sword :)

Think you could make the hero's shield from zelda majoras mask? People tend to favor the Hylian Shield over it but the Hero's Shield has a very neat design as well.

so they're made of pine like the first one?

ITS ABOUT TIME

@HappyAtom

7 жыл бұрын

HA HA Ha! I know you were dying for it. Really the whole reason this video is up is because you kept pushing me to do it. I did a Twilight Princess template as well but not the build. I will post both templates. Private message me your address and I will mail you some of the aluminum, cloth and possibly tacks if they come. I will have extra. That way it will save you a little $ when you make yours.

@skilarbabcock

7 жыл бұрын

Sweet!!!

@skilarbabcock

7 жыл бұрын

how can I PM you?

@HappyAtom

7 жыл бұрын

happyatomirl@gmail.com

@skilarbabcock

7 жыл бұрын

Alright, sent. Thanks a bundle !!! Now I gotta get some more wood haha

what did you use to clean the belt sander?

that looks way too cool. I wish I owned the weapons you made and just hang them on my wall. Too bad I don't have the tools to make them..

Can you make a video on genji's swords and shuricans from Overwatch

nice job! a little bit complicate for me 'cause I don't have all your tools, but great!

Omg, great!

What did you use to make your template?

I love this but can you make subtitles in French because i will make it but I don't realy understand. Thanks you so much!!

Amazing work but I found so many ways to improve and make it look like the scabbard from the game.

Can I do this without a table saw and still get a clean cut and carve ?

@HappyAtom

7 жыл бұрын

Totally. It just takes a little longer. In wood-working there are always alternative ways to do things. What part are you worried about? The rails?

@whalix4488

7 жыл бұрын

HappyAtom I'm worried about the inside cut and if there is an Alternative way to cut it and still get a clean angle on the outside

I wish i knew what his big tools were

Wow

Can we get an easy project? This stuff looks great but I dont have the skill or equipment to do it well. I love watching your videos though.

What is the song at 5:19

best arcade ever so lucky

Can I buy it please???

You need to use a vector cut on the laser to cut wood

@HappyAtom

7 жыл бұрын

There are two modes on this laser software I am using. One is a vector burn but the laser is not strong enough to cut the wood.

@rileycabbage1610

7 жыл бұрын

HappyAtom if you you use a vector cut it will at very least engrave it quicker because it will not do the side to side motion it will follow the line but normally the line needs to be a hairline thick for it to do a vector cut (at least the is how my machine works)

@HappyAtom

7 жыл бұрын

Matthew DeCavitch What machine and software do you use? Whats the power of your laser?

@rileycabbage1610

7 жыл бұрын

HappyAtom I use coreldrawl and I have a 50W co2 laser

@rileycabbage1610

7 жыл бұрын

Oh and the brand is mophorn

theres been a long time since last vid huh?

sell these please?

There's no template.....?

Make majoris mask

We can't download the patterns :'(

you havnt uploaded in a long

@HappyAtom

7 жыл бұрын

I know. It takes me way too long. I'm trying to change things to make it quicker.

@altern7938

7 жыл бұрын

HappyAtom this was worth the wait

every one I see making the Master sword makes it always look so fake or a really cheap metel if I ever get the materials I'm going to make it so strong it will never break and cut through anything

Not able to access the free template

@3harvard

2 жыл бұрын

@Jack Page I did get the template from Happy Atom! Grandson was so happy to have his sword and scabbard on Halloween.

@3harvard

2 жыл бұрын

@Jack Page I did it completely out of craft foam, as my grandson is only 7 years old. I would send you a photo, but not sure how to do that

@gedaliahdimbert8712

Жыл бұрын

@@3harvard Can you share it somehow?

what kind of bandsaw is that? I need one like that! I made the skyward sword and shield for someone a couple months ago, and I am quite happy with the sword and shield, but your method for the scabbard looks way easier. quitefranklybuilds.blogspot.com/2015/12/mastersword-and-hylian-shield.html

@HappyAtom

7 жыл бұрын

You did some great work! I really like it. Thanks for sharing the link. My bandsaw is no good. It's a Ryobi and I have never been happy with it, even when I got it brand new.

@TheFinalformsora

7 жыл бұрын

I got a craftsman a while ago and it sucks, but yours doesnt seem to drift as much. Wish I had a Jet brand saw haha

Anyone ever heard of JessiMew?

Would you be willing to sell me a sword and scabbard?

i'm planning on make this for my halloween custom, yep I'm A NERD

@ultrarun6889

6 жыл бұрын

Thecowrock same but next year cuz I don't have enough time to do it this year

dats alought of arcades

be more carfull with that saw and knife

and...the hylian shield

5hu

first

@williameclay9374

7 жыл бұрын

first respond

My adventure with the tree began with projects from Woodglut.

Can you make me One plz I'm your fan

And a sword plz

plz

Do not know how to edit your videos? You can just simply fast forward some of the non-important parts!

can't wait for part 2

Wow