Hi want to recreate this but what is making it stand I can really tell how the bottom is able to stand without sliding

@IfOnlyApril

3 жыл бұрын

Hi! I'm so glad you want to try to make it!! I was also hesitant that it won't stand on it's own, but it works! I think it has to do a lot with the fact that I cut the legs on the bottom at an angle so the bottom plank is 90-degrees to the floor. I mean the bottom support is just laying on the floor. I'd assume if you skip this step and don't cut legs at an angle, it might slide. Good luck with your built! And tag me on Instagram when you finish! I'd love to see the final result:)

Looks good!

Project turned out great. I like the pocket jig idea for the lower shelves.

@IfOnlyApril

3 жыл бұрын

Thank you! I’m very pleased with the way it turned out too😊 and it was such a bummer it didn’t glue together 😣 so kreg jig to the rescue💪🏼

Waited till the end....finally this turned out so gorgeous... super 👍

@IfOnlyApril

Жыл бұрын

Thank you so much 😊

That’s gorgeous I love it!!

@IfOnlyApril

3 жыл бұрын

Thank you, Cynthia ☺️

Looks great!

@IfOnlyApril

3 жыл бұрын

Thank you so much😊☺️

Joining two boards requires two perfectly straight and square edges. If you have a tablesaw, you can run it through the saw to take a little off both sides until it's straight. If an edge is really crooked, you can stick it to a straight board with double sideded tape, running that edge against the fence. The process of making the edge square and straight is called jointing.

@IfOnlyApril

3 жыл бұрын

Thank you so much for this valuable feedback! I’m still learning with every project :)

Love your energy, I'm new here from Clubhouse, heard your question, thank you for asking. I too am a DIY channel. My passion is DIY and I'm enjoying Sean's classes, research, leveling up. Good luck, xoxo Sandy PS I'm addicted to woodworking just waiting for it warm up.

@IfOnlyApril

3 жыл бұрын

Thank you Sandy!! I just discovered Clubhouse last week😆 it was my first time speaking haha so scary!! It’s great to connect! Just followed you! DIY is the way of life😁

@mackenziemill

3 жыл бұрын

@@IfOnlyApril I just started Clubhouse too, It's so addicting I'm on Alex Cooper's channel everyday and he is on in the morning with Scott. It's crazy how much value is there. I am a lifetime member of VRA, Sean's classes. I'm excited to meet you. I'm releasing 3 new #shorts tomorrow and going to aim at 3 per day and see what happens xoxo Sandy

I prefer the bare wood look too. So easy!

@IfOnlyApril

3 жыл бұрын

Right? I think I’ll keep it this way)) getting tired of all the stains

thanks for the video:)

@IfOnlyApril

3 жыл бұрын

I’m glad you enjoyed it😊

Господи, нет времени смотреть твои видосы, но когда нахожу минуту, то обязательно это делаю!

@IfOnlyApril

3 жыл бұрын

Спасибо дорогая😘😘 мне приятно

How do you keep the shelves from rotating around the screws? It looks like you only put one screw in each side, and I would think that the shelves could swivel! Awesome video! Thank you for sharing.

@IfOnlyApril

3 жыл бұрын

That's a very great point, David! It WAS swiveling, especially when I put heavy books on the bottom. I had to unscrew it and added glue on the sides. That solved the issue! So far so good! And thank you for watching ;)

I love a lady that can do stuff! And you're not hard to look at either! hehe.

@IfOnlyApril

2 жыл бұрын

🤣🤣🤣thanks

🥰🥰🥰🥰🥰🥰🥰🥰🥰 Subbed & Liked!! ⭐️⭐️⭐️⭐️⭐️

So the shelves are held only by the two screws? They don’t have any additional support on the back side close to the wall? Is it secure enough? Thank you for your response

@IfOnlyApril

8 ай бұрын

Yes! It's been stable for years since it's leaning to the wall at an angle. If I did this project again I'd also use wood glue in addition to the screws. Hope that helps!

Do you need to attach it to the wall?

@IfOnlyApril

3 жыл бұрын

It is balanced because of the angled bottom plank and legs. I didn’t attach it

I think those shelves will tilt over time. There is only one screw. There is nothing to hold them level.

@IfOnlyApril

2 жыл бұрын

That's a great point! I was also concerned about it so I glued the shelves to the sides! I did it after the video was made :)

You talk too much, just show us !!!!!

@IfOnlyApril

4 күн бұрын

Noted! Thanks for the feedback😁