How to Make L-Ported Subwoofer Box - DIY
Тәжірибелік нұсқаулар және стиль
Yet the easiest and quickest subwoofer box to make, the L-ported subwoofer enclosure. I bet you see a lot of DIY subwoofer boxes being showcased on Facebook, Pinterest, Instagram and even here on KZread made out of L-ported or some may other call it transmission or T-Lined boxes. That is because it is quick and easy to build, everything is using the same material from baffle to enclosure to port out of MDF sheet!
Let's dive into the fun part right away!
- First part is the unboxing of a brand new Pioneer TS-W311D4 12" Champion Series Subwoofer with Dual 4 Ohm Voice Coil.
- I used the RE Audio L-Ported speaker box calculator on their website to compute the right box for the subwoofer. Here's the link reaudio.com/box.php. You need to activate and enable Adobe Flash Player on your browser in order to use the subwoofer box calculator.
- TS-W311D4 has a factory free-air resonance of 43Hz, but I tuned beyond the Fs and tuned down to 31Hz in this ported enclosure.
- Resulting box volume is 2.001 cubic feet equivalent to the 31Hz tuning including the total port displacement.
- Layout the calculated values on Tinkercad to get a graphic overview. Here's the link www.tinkercad.com/things/19pH...
- Roundover router bit to round the edges inside the port to increase good air flow.
- Then the rest is the whole nine yards of subwoofer box building. So sit back and relax while having a cold beverage and some snacks to watch this satisfying DIY subwoofer video.
- Carpeted with charcoal dark speaker carpet. Used a rubber contact cement to adhere the material into the box.
- Most favorite part: The assembly. Tinned the exposed copper part of a 12 gauge speaker wire to ensure coolness and connectivity.
- Wired the champion series pioneer subwoofer into parallel to get a 2 Ohms final impedance.
- Bolted the subwoofer using a 4mm Allen Hex bolts and 4 prong Tee nuts under it.
- Showcase the final product like a champion!
Now it is your turn to build this very easy and very quick slotted subwoofer box. I hope you enjoy this little tutorial and I hope you hit that like button and please consider SUBSCRIBING to my channel. THANK YOU!
Пікірлер: 886
Here's the SUBWOOFER BASS TEST VIDEO - kzread.info/dash/bejne/o4Z5kpendMrJoaQ.html, ENJOY!
@tulsidas74
4 жыл бұрын
7089287177
@AkKumar-nk6on
4 жыл бұрын
h0metheter
@tinyrurujohnson3049
4 жыл бұрын
What was the tool you used on your drill that looked like shocks?
@chrclmnky
4 жыл бұрын
pitner its just a generic portable drill guide, it helps drilling perfect perpendicular holes.
@arumugamarumugam8266
4 жыл бұрын
9080323386 call me bro
Massive test and demo will follow shortly. Subscribe to get notifications on new video uploads!
That's what you call finesse workmanship! An artist creating a masterpiece right there!
@chrclmnky
4 жыл бұрын
Thank you Eduardo.
Ang galing mo bro! Keep sharing your idea, halos pareho tayo ng content bro. Stay safe lagi.
what size of box do I need to make for an 8" JBL sub??? the speaker is only 200mm wide so if I make the box 300mm wide by 200mm deep and 400mm long will that be ok?
I think he's got a lot of cool stuff ungoy na Wala pera kaimgit nice work man!!
@chrclmnky
Жыл бұрын
🐒😎
I love your dust collection system lol ;-)
@angelolveralopez1368
Жыл бұрын
🔉
Great build indeed with precision!! Can we also prepare that sound box (Pioneer one in this video) on our own? Just curiously asking..is that possible on the earth? I want to have everything on my own if at all to start preparing.😎
amazing workmanship!
Hey we Appreciate these videos that you Put out on here! It teaches us A Lot. Keep up the Good work, Thank You!
@chrclmnky
4 жыл бұрын
Always welcome. :) Have a nice day.
Exactly what im looking for. Nice job
@chrclmnky
4 жыл бұрын
Thanks!
What would the dimensions be for a box like this on a 10" 300 watt kicker?
Watching these videos is so relaxing :-)
@chrclmnky
4 жыл бұрын
😎
holaa amigo buenas tarde que medida tiene el cajon en cm.. y cuando mide de ancho el port de entonacion graciass!!!
You sir are a craftsman. Nice build.
@chrclmnky
4 жыл бұрын
Thank you for the feedback, Jay. 😁
Dude that box is amazing👌
@chrclmnky
4 жыл бұрын
Thank you Keval.
sir proccess of buy this box.... I need this box
Sou muito seu fã! Seu trabalho é incrível!!!👏👏👏
@chrclmnky
4 жыл бұрын
Thank you much, Joaquim.
How can I get a box made from this guy, I can't find anyone willing to make a box for a 15 evl...
What bit are you using to create the dado cut or similar to rabbeting bit?
@chrclmnky
4 жыл бұрын
Just a 3/4 inch diameter straight router bit.
Satisfying video ❤
Pro-box sir! You got skills!
@chrclmnky
4 жыл бұрын
Thank you Lasse. 😎
Very skilled work you do on all your work .now i ask you if you can make this exact box in wedge shape? its for 2012 Silverado crew cab for behind the back seat .main back .
@chrclmnky
3 жыл бұрын
Thanks. I have a bunch of wedge shaped boxes built, check them out on my channel.
Pioneer champion series 312-D4 modelimi?
Exelente uso de las herramientas para un exelente trabajo final!
@chrclmnky
4 жыл бұрын
Many thanks, Alejito.
Is that the Wolfcraft drill guide? I’m looking for a decent guide for reliably drilling pilot holes perpendicular to the wood’s surface.
@chrclmnky
4 жыл бұрын
It's just a generic Chinese made from a flea market.
Very impressive man awsome work I wish I had that talent
@chrclmnky
4 жыл бұрын
Thanks Sean
Nice to have the right equipment. Sweet box.
@chrclmnky
3 жыл бұрын
🤩🥳
Estoy impresionado por la calidad de tu trabajo máster , tienes otro seguidor
@chrclmnky
3 жыл бұрын
Thank you Miker. 🤩
Beautiful box and super clean job 👌
@chrclmnky
3 жыл бұрын
Thanks 👍
Where’d you get the TS-W311D4? Everywhere I’ve checked is out of stock and discontinued.
@chrclmnky
4 жыл бұрын
Hello Trey, these subs are discontinued on the Western part of the world, but still aplenty here in the Philippines.
Galing ni kuya oh.
Great work. Just what l have looking for. Thank you for sharing.
@chrclmnky
2 жыл бұрын
Great to hear!
Hermoso, un placer de ver
Wooow Beautifully crafted sub box man i love it!!! I wish had a nice table saw to cut my pieces straight. My boxes tend to have little gaps because of cutting the pieces free handed.thank god for caulk! Where i'm from tools are super expensive but i make do with little that i have to make them🇹🇹
@chrclmnky
3 жыл бұрын
Thanks. I think you can purchase Chinese made power tools very cheap from Banggood and have them delivered to you in your country.
@walcottdion5821
3 жыл бұрын
@@chrclmnky thanks bro🖒
can you give me the masurements for this box? i can't transform for mm in tinkercad. its can't show the air port length etc.
@chrclmnky
2 ай бұрын
there is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
What are those bolts and screws called that you used when to mount the subwoofer? TIA
@chrclmnky
4 жыл бұрын
Tee nuts or T-nuts. The bolts are allen hex head.
Dude. That's some awesome work.
@chrclmnky
4 жыл бұрын
Thanks for the feedback. Cheers!
Very well done project bro .... u have been progressing a lot .... port area a little oversize . Might be looking for spl ....some 45's to smooth air flow .. a cross brace and these driver can nearly crack everthing in its path .. i've been using the single coil one in a honda and its awesome .... tsw311s4.. good job .. congratulations ..
@chrclmnky
4 жыл бұрын
Thanks Raghoobear.
Magnífico trabajo compañero.....una obra de arte.... enhorabuena
@chrclmnky
4 жыл бұрын
Thank you very much Juan.
Hey Do you think you could post a Link on where we could purchase the Box building CAD program that you use....? Thanks!
@chrclmnky
4 жыл бұрын
Hello, its free on the web, tinkercad.com.
Hola buen día puede ser tan amable de pasarme las medidas de la caja por favor tengo ese subwoofer
Does the shape of the subwoofer box have an impact? I wanted to make it so it fits behind the rear wheel/strut tower to take up less space.
@chrclmnky
4 жыл бұрын
Hello Captain, no. Any shape will do. Just calculate the volume, size, port area, to get an accurate box. Use Bass Box Pro 6.
😎Congratulations !!! Work of art, perfection, great finish ... The efficiency must be the same ... Here in Brazil there is a lack of investment in tools and a lack of caprice among many professionals. BRAZIL - 😎Parabéns!!! Obra de arte, perfeição, ótimo acabamento... A eficiencia deve ser a mesma... Aqui no Brasil falta investimentos em ferramentas e falta de capricho entre muitos profissionais.
@chrclmnky
3 жыл бұрын
Thanks Leandro
Badass box homie
What the function L flow.?, i think for deep bass, low and long freq, iam not sure
@chrclmnky
3 жыл бұрын
Just a normal slot port box.
Suggest me dimensions for a 14" JBL subwoofer box
I love this product ❤
In the Re box calculator, why does it say 2 inch for port width and then in the box port software i see it as 4 inches??
@chrclmnky
4 жыл бұрын
Hello Amrika, good question. Box-port Design is only a circle port so I converted the square perimeter into equivalent circle perimeter. That is why I need to use RE Audio's calculator for the port.
Is this dimension good for pioneer ts-w1211d4 subwoofer.
@chrclmnky
3 жыл бұрын
Hello Machan, actually TS-W311D4 is just the same as TS-W1211D4. W311D4 is model for Philippines and W1211D4 is for India. Both are just the same.
I have an American bass Xmas 12 inch subwoofer what will be the appropriate box size for that????
@chrclmnky
4 жыл бұрын
Hello Crisanto, I calculated the TS parameters of that subwoofer and it can output a -3dB @ 24.9Hz in a 1.5 cubic feet of ported enclosure.
Enclosure box ki size kya hai sir helph
Love how the song already has my 12" hitting haaaaaaaaaaa ayyyyyyyy
Pls reply me, which is good for bass, sealed or ported...? As u have desined both...
@doyouevenweldbro4769
3 жыл бұрын
Ported
Impressive video, really nice box
@chrclmnky
4 жыл бұрын
Many thanks! More subwoofer boxes to build!
hello, I have a 30 cm 2 ohm 550 rms bass, what are the cabinet dimensions for it? I don't have a computer I can't open the program can you help me? thank you in advance
@Ozturkbeyi27
2 жыл бұрын
If you can give an address, I can write to you from whatsapp or instagram for communication.
Nice build! I’m going to do my own soon. What router bit did you use to cut the speaker hole?
@chrclmnky
4 жыл бұрын
Thanks for the feedback. Router bit used is just an ordinary straight flute bit with 1/4" shank.
Really nice box build!
@chrclmnky
9 ай бұрын
Tnx Neil
I have a 2008 for explorer I'm working with a 12 inch. Cerwin vega pro 1800w sub, I need a box so I can still use the 3rd row seats, any idea?
@chrclmnky
3 жыл бұрын
You need to build a box with a shape of a wedge. Here's some videos kzread.info/dash/bejne/jKycqKeKc9HTk9o.html kzread.info/dash/bejne/k6mprcSvddWXYaw.html kzread.info/dash/bejne/m4B8rtZmdM7MhZM.html
@OHWOW86
3 жыл бұрын
@@chrclmnky your builds are awesome bro do you ship and how much to custome build?
@chrclmnky
3 жыл бұрын
@@OHWOW86 thanks. But only shipping within the Philippines.
can you make me a ported box for my chevy 2019 single cab truck
hello, first of all, I am writing from turkey, cabin prices are very expensive in turkey and nobody gives the right measurements. Can you give detailed cabin measurements? Thank you in advance.( l port box )❤( I could not reach the dimensions on the site written in the description )
@chrclmnky
10 ай бұрын
Hello Mr Tycoon, there is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
Can you provide box size details please.
Hi, how thick is the mdf material and how many square meters do I need? thank you !
@chrclmnky
4 жыл бұрын
3/4 inch thick. About 2.5cuft of net volume
Amazing work.
@chrclmnky
4 жыл бұрын
Thank you Sanjay.
Very nice build. I bet it sounds great!
@chrclmnky
2 жыл бұрын
Thanks!
Sar prise batao muje chahiye
What was that trill bit jumper thing you used
@chrclmnky
3 жыл бұрын
That was a generic drill guide. Guides the drill for a somewhat perfect 90 degree hole drilling.
Und wo soll ich den ganz genaue der Gehäuse ab kaufen??? Ich möchte eine haben..!
@chrclmnky
3 жыл бұрын
You can build the box.
Pls make a box for pioneer ts-w305c ! Please 🙏
What program are you using to the design the box ?
@chrclmnky
4 жыл бұрын
TinkerCad, here's the link www.tinkercad.com/things/19pHwXeSac5
1st liker. 1st commentator ahahah. idol ko yan. Pagawa na kayo
@chrclmnky
4 жыл бұрын
Thanks brother
Nice work man
@chrclmnky
4 жыл бұрын
Thanks for the feedback. :)
Great build... I love your work... !
@chrclmnky
2 ай бұрын
Thanks Arnab
Hey, i want to ask you that the subwoofers contain documents about some enclosures design,so we have to follow that or not ??
@chrclmnky
4 жыл бұрын
It's good to follow also good to customize your own.
@visheshchaudhary6685
4 жыл бұрын
@@chrclmnky i also want to know that, Is 2 .cu.ft. is good for home rather than 1.5.cu.ft because i love to hear soft bass.
@chrclmnky
4 жыл бұрын
@@visheshchaudhary6685 Yes bigger box can produce lower bass. But do not go too big.
hello! is there anyway you still remember alll the materials you used. i would like to build one of my own.
@chrclmnky
2 жыл бұрын
Just MDF sheet, glue and carpet in making the box.
This box usefull for pioneer ts-w3003d4 ?????
@chrclmnky
2 жыл бұрын
Yes basically the same.
Met siang, Bang Bisa pesan gak yg model kaya di video
That's a pretty nice sub ngl!
@chrclmnky
3 жыл бұрын
Thanks sharpy
Great video just wondering if you ever confirmed if this box is indeed 31hz because I seen in another message a commenter said it might be higher. I'm looking for a box that is 2 cubes at 32 to 34hz. Thanks.
@chrclmnky
4 жыл бұрын
Hello Johnny, did used several speaker box, displacement and volume calculators as you can see in the beginning of the video. You know these random commentors trying to be experts behind their phones or PC's.
@paquesepas6696
4 жыл бұрын
@@chrclmnky For sure lol. Another question I clicked the link for the box specs but I get nothing can you post the cut sheet or a better link? I want to build this box. Thank you.
@chrclmnky
4 жыл бұрын
@@paquesepas6696 I agree brother. Read the video description, there's a link to Tinkercad layout and design to this box. You need to create an an account in order to see further about the 3d design.
hey there, i was making a speaker, does putting glue and sealant on the edges make a difference..... I used alot :)
@chrclmnky
3 жыл бұрын
Hello. Me i use glue on the inside corners for an air tight seal. That's it.
@dillanmistry
3 жыл бұрын
@@chrclmnky thanks bro
I feel after entering the parameters provided (The layout on Tinkercad) I feel the Subwoofer might be tuned closer to 35 - 37Hz. But the enclosure looks beautiful! (I could be wrong, I use WinISD)
@chrclmnky
4 жыл бұрын
Thanks for the feedback. Now I want to re-install WinISD again on my PC.
Do you have an app for the newbie how to tune about the port ? I mean how long it is needed to gain the exact sounds.
@chrclmnky
3 жыл бұрын
Bass Box Pro 6 is very accurate but very expensive. You can use WinISD, it is free to download for Windows. Still very accurate.
@11nivre
3 жыл бұрын
@@chrclmnky how about for Android app? Do you have an app to recommend?
I gave a thumbs up for the OSHA approved flip-flops :-)
@chrclmnky
4 жыл бұрын
🙈
l have a subwoofer box size 10 incg Air is leaking from the sides of the wood Did you use glue on the inside of the wood
@chrclmnky
2 жыл бұрын
Yes I use glue. Not leaking when you cut the wood perfectly square and apply enough glue then clamp overnight.
@user-gt4pc2fk6y
2 жыл бұрын
@@chrclmnky Yes, it is an incg10 subwoofer, the company name is syzx
Nice work !
@chrclmnky
4 жыл бұрын
Thank you! Cheers!
What is the name of used tool used to curve the edges ?
@chrclmnky
4 жыл бұрын
Palm router or trim router with roundover bit.
What connection did you make of Subwoofer parallel aur series and which one is better pls tell me
@chrclmnky
2 жыл бұрын
This one is in Parallel to achieve the least DC resistance which is 2 Ohm.
@sajjadhussain6944
2 жыл бұрын
@@chrclmnky ok dear thanks 😊
@sajjadhussain6944
2 жыл бұрын
@@chrclmnky but i have not mono amplifier i have four channel stereo amplifier i bridge 2 channel for Subwoofer and use other 2 channel for speakrs so will the Subwoofer work at parallel
Hey Friend!! what size of rectangular duct? I couldn't find it here in the specifications, because I had to translate the language. Tanks.
@eiconteudodigital
4 жыл бұрын
I was also unable to find out on which plate the circular cut of the speaker is made. I ask for help!
@chrclmnky
4 жыл бұрын
Hello Evandro, this link is to the TinkerCad layout and design www.tinkercad.com/things/19pHwXeSac5
Price
All of these fancy names, for a standard bass reflex box.
Brother what is the dimensions of this box 📦
Hello! This box work with a sub Pioneer TS-w261s4 10"?
@chrclmnky
3 жыл бұрын
Yes, just lessen the width by 3", and height and depth by 1". Lessen port length by 2" also.
@johnpizarro6563
3 жыл бұрын
@@chrclmnky very well, another question, the measurements of the box are external or internal?
Does it matter where the port is located? on the same side of the woofer or on another side of the box?
@chrclmnky
4 жыл бұрын
Anywhere. Low frequency is omni-directional.
Bravo! Lavoro eseguito con cura!
@chrclmnky
3 жыл бұрын
of course
What music did you use in the video, specifically at 5:21?🤙🤙 Handy work you have there too!
@chrclmnky
4 жыл бұрын
Thanks Darryl. The music was Audio Hertz - Mission to Mars kzread.info/dash/bejne/Zop4zZZvoM3JdKw.html
Quite a high tuning, i suggest 20hz up for better bass and sql
@chrclmnky
11 ай бұрын
20hz tuning is expensive to setup. First you need a subwoofer with a resonance of at least 25Hz, and that only available on super expensive brands like Sundown, DD, B2 or JL Audio.
Does the biz hear and feel it from a long distance outside the car, or is it only heard when you are close?
@chrclmnky
3 жыл бұрын
Can be heard on the next block.
@abdalllaahanii3248
3 жыл бұрын
@@chrclmnky I don't know because I want to buy this way, I want to know about it from you
@chrclmnky
3 жыл бұрын
@@abdalllaahanii3248 Yeah I already told you, the sound can be heard on the next block or the next street in our village.
Bro can you please give the dimentions of the box and how much is the box tuned
@chrclmnky
4 жыл бұрын
Hello it is in the tinkercad layout in the video description. Thanks
Ask ko lang po kung magkano sub box na D 15 ?
Damn nice work!! 💯👍💪
@chrclmnky
Жыл бұрын
🤘😎