3D beast being 3D beast. His skills are absurdly high. I honestly don't know what type of mind is required to comprehend such material, put it together, construct a version of it and then TEACH IT at a very high level of accuracy. This channel is a true tour the force on parametric architecture. I wish him full success in his career and THIS channel. I'm doing 3D every single day to reach such level of comprehension. It's the only way to get it.

@3DBeast

Жыл бұрын

Thank you so much kummer. Same wishes to you on your journey.

@cango5679

6 ай бұрын

agree.

Excellent bro, you rock. Thanks.

GREAT WORK!

@3DBeast

Жыл бұрын

Thank you! Cheers!

fantastic logic, Right ON!

@3DBeast

2 ай бұрын

Thanks

10:26 I don’t think I have the bounding rectangle component! Is there an alternative or can I use bounding box?

How did you get this equation to create boundary rectangle?

Thank you for this amazing tutorial 3D Beast ! I still have a problem at 6:59 when I do the flip curve i have an error : "A closed curve cannot be compared to a linear guide" can you help me please ?

Thank you very much!! Regards fromUruguay

@3DBeast

Жыл бұрын

Thanks Mateo

it was hard to do tbh because of one thing i coulndt find the bouling rectangle i was able to only found the the bounding box and it made the whole thing looks awful haha but i gotta try one more time i guess

Can you make a sequel for this tutorial? Like for example make a series of those columns with various coordinates, some are close to each other, and so on.

I'm very curious about how the construction process and material production meet the design requirements. and thank you share ,thank

nice one

@3DBeast

Жыл бұрын

Very nice😀

Hello, can I use bounding box instead of bounding rectangle? Will it work fine?

Hi, what is the plugin you used for align the gh components, whenever you move gh component there are "guiding lines" that appeared?

@3DBeast

Жыл бұрын

SnappingGecko

Thank you so much for the tutorial!! I wanted to ask What do I have to do so I can make a facade with this mesh-structure?? I want this structure to flow all over a prism (that would be the building) like a lattice. I just need the mesh to keep going over the sides of the prism (that would be the walls). I can't get it done in grasshopper

@3DBeast

Жыл бұрын

first convert your wall into triangular patterns,(tri-remesh component help u here ) then from the triangle u can create the patterns

hi, when you connect the trim with region component to the curve component, why do the two horizontal lines at the bottom get trimmed (5:35 timestamp)? is there a way to fix that?

@3DBeast

Жыл бұрын

connect XY plane to P(plane ) input

Hi, which plug-in did you use for the bounding rectangle component?

@3DBeast

Жыл бұрын

pufferfish

Hello:) Great job! As someone proficient with grasshopper, in the last few days I was struggling with the Broad Museum. I challenge you!! to try making it yourself. All attempts i found on the internet are trash.. the facade panels are not that sophisticated, the problem is with the corners. The facade panels are going in different directions on the adjacent sides, it can be hard to notice at first. All the panels seem to be one type.

@3DBeast

Жыл бұрын

Thanks Ivan, I'll give it a try.

4:07 After you join all the curves, how did you get the lines to turn from black to red in the rhino viewport? I couldn’t get it to work, will this affect the rest of the model?

@3DBeast

Жыл бұрын

I just baked the curves to see the result., then hit Ctrl+Z to undo the bake. It didn't affect the final model.

which unit are you using at the rhino? Millimetres, meters or centimetres? Do the values that you are giving in the number slides have units? ı have a problem with the value that you are inserting at 12:15 value=2.000. When I use the command of a project, it disorders the body of the column.

@3DBeast

Жыл бұрын

In the video, I'm not using real-life measurement units to focus on the visual aspects of the modeling process. You can set the Rhino unit to any unit you prefer (centimeters, meters, inches, etc.), and this will make all the number slider values be in that unit. If you're having trouble with disorders in the body of the column, try using smaller offsetting values or try a different approach. create two different surfaces by offsetting the original surface. Then project the curves onto the surfaces and create a loft between them. "

Hi! At around 12:30, when I connect the loft component to the project component, it creates a triangular plane with the curves created with the prune component around the central hexagon. It doesn't look like what you have on the screen- what can I do to fix this?

@lizaabuhanna3389

Жыл бұрын

i got the same problem, did u know how to fix it?

@johnhouseman3546

Жыл бұрын

I had the same problem. You need to be in the top view when he switches to top view at around 12:04

in the video at 12:30，I think it would be more great，if you offset curves behind project curves.

Thak u!!!!!!❤

@3DBeast

Жыл бұрын

You're welcome

What exactly are you doing at points when you select nodes then changes occur in rhino e.g. 1:36 and 1:03?

@3DBeast

Жыл бұрын

ctrl + Q hide preview

Hello .. I've been following your instructions till you get to use "bounding rectangle" plug in cause I couldn't found it what's the solution , please?

@samiran8985

5 ай бұрын

you might not have installed pufferfish properly

What is the plugin for that improved offset Surface node? is it Pufferfish?

@3DBeast

2 ай бұрын

Yes Pufferfish

Hi! first thank you for this tutorial! I am a student and I highly appreciate these! In minute 13:17 in getting an error while offsetting, it says data conversion failed from Brep to Surface, I don´t know how to fix or where the error could be! thank you!

@3DBeast

Жыл бұрын

Hi, you need to install pufferfish plugin and use its offset surface component

what type of graph are you using for the graph mapper? i cant see which one you select even slowed down to .25 speed. Also, what is the purpose of using the relays?

@3DBeast

Жыл бұрын

Conic, hover over the graph type and press C.

@coryconstantine4670

Жыл бұрын

@@3DBeast Thank You! I thought that was the case but when i select conic there is no change to my range of circles no matter how i manipulate the graph mapper

@3DBeast

Жыл бұрын

@@coryconstantine4670 may be u miss something when u following

How can I do this with a morphed surface made on rhino instead of starting with hexagonal lines at the beginning. I want to start with a surface I made on rhino basically. Please help.

@3DBeast

28 күн бұрын

Here's an improved version of your draft reply: You can reference the surface you made in Rhino using the surface container in Grasshopper and replace the lofted surface.

Hi, i have a problem in 6:29 with extend curve, i connect everything like you do and mine still light in orange. Can you tell what i have to do to fix it?

@3DBeast

Жыл бұрын

what the waring says? (bubble icon on the component )

@beatawrobel1695

Жыл бұрын

@@3DBeast Input parameter Curve failed to collect data

@3DBeast

Жыл бұрын

@@beatawrobel1695 u disable some nodes by mistake, check out gray components and enable them

@beatawrobel1695

Жыл бұрын

@@3DBeast thanks, it works now :)

Hi, i can't seem to connect two inputs to boundary surfaces on 11:09 is there any way i can do to make it work?

@syifaamaliakhairunnisa6196

6 ай бұрын

Oh, i found out i should press and hold the shift button.

@Armin_Ernst

4 ай бұрын

@@syifaamaliakhairunnisa6196thank you! I just needed that one!

Which software are you using

@3DBeast

Жыл бұрын

rhino-grasshopper

How you connect two inputs in 11:10 i cant join both

@jdlm9

5 ай бұрын

press and hold shift to connect the second one.

I have a problem in 5:38

Hi! Thanks for this very helpful tutorial. I’m getting stuck on the loft at 13:00 and it’s turning out very messy and chaotic. I have pufferfish and I believe all of my other parameters are set correctly.

@johnhouseman3546

Жыл бұрын

Never mind! I figured it out!

@3DBeast

Жыл бұрын

​@@johnhouseman3546 Nice Thanks for the update!

@mernaosamamostafa8548

8 ай бұрын

I have the same issue with the loft, how did you solve it?

@azharasultansikh1043

3 ай бұрын

@@3DBeastwhat was the solution? I am also stuck for two days in a row, can’t figure it out:(

@RBstudio_H

29 күн бұрын

@@azharasultansikh1043 Hi not sure if you figured it out however, right below the graph node where the domain start is move it around a bit and adjust to where the loft comes out clean. Hope that works!

Hii excelent video! Im stuck in minute 6, in my param viewer none of my curves have 2 items in them :(

@3DBeast

Жыл бұрын

try connect "Xy plane" component to "Trim with Region" P input

Really cool Stuff but I got stuck at the begining when you inverted the polyline for some reason I tried and it would not let me

@3DBeast

Жыл бұрын

connect the "Boolean toggle" component to C input and set it to True.

@jeronimoreyes9398

Жыл бұрын

@@3DBeast thanks for the help im futher along the video now, (@11:10). for some reason it will not let me connect the geometry from the rectangle AND the list index from the circles to the same boundary surface. it will only take one

@3DBeast

Жыл бұрын

@@jeronimoreyes9398 Hold shift while you connecting

@jeronimoreyes9398

Жыл бұрын

@@3DBeast I feel stupid, hahaha, this is a really cool design i really want to see it work, I'm fairly new to grasshopper so I'm making some begginer mistakes but going through it has taught me a lot. Thank you for all the help

@3DBeast

Жыл бұрын

​@@jeronimoreyes9398 I'll make sure to keep new users in mind when creating the guide.

Anyone knowns where to get bounding rectangle ?

@samiran8985

5 ай бұрын

pufferfish plugin for grasshopper

10:26 bounding rectangle😊 i dont have what the solution

@3DBeast

2 ай бұрын

just install Pufferfish plugin

Bounding rectangle is missing?

@3DBeast

17 күн бұрын

It's from the Pufferfish plugin. Make sure to install it from food4rhino

Well this is amazing, but not definitely for start to learn. 😅I am incredible lost. But nice.

@3DBeast

Жыл бұрын

I have plan to make a tutorial for Starters. Stay connected