That’s not a fricking jet engine, it’s a series of fans blowing at a butane flame

@YongJoon_Choi

4 жыл бұрын

Not a jet engine Fan Heater

@macieksoft

4 жыл бұрын

Sort of EDF with afterburner. Not a jet anyway.

@Whellypl-vb2og

4 жыл бұрын

It's just a small flamethrower. Not so useful tho.

@ghostrider7360

4 жыл бұрын

🤧🤧No its a high tech jet engine for him He thought he use this engine in his privet jet🤣

@chuofmilk

4 жыл бұрын

USB power Engine

the title should be " how to make a gas stove"

@AlibinAbbas-bk8xs

4 жыл бұрын

Hahahaha

@benguela2399

4 жыл бұрын

kkkkkkkk

@amitsaini663

4 жыл бұрын

right

@yuvaraj1386

4 жыл бұрын

🙄🙄🙄🙄🙄🙄🤧🤧🤧🤧🤧🤧🤮🤮🤮🤮🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶

@abcdefa3420

4 жыл бұрын

Tamilarasan

Not even close to being a jet engine. It's a very poor electric blow torch.

@aidenpearce5275

3 жыл бұрын

it's an jet engine afterburner

@supyogi

3 жыл бұрын

haha

@franken0702

3 жыл бұрын

@@aidenpearce5275 No its not how a afterburner works.

@sciencechicken7669

3 жыл бұрын

This is actually a motor jet. The world first "jet plane" "caproni campini n.1" used this type of an engine.

@franken0702

3 жыл бұрын

@@sciencechicken7669 Its called an electric ducted fan (EDF), and is not really a jet engine.

USB powered electrically blown dual tanked oversized cigarette lighter with external manual timber-sulfur type ignition. I believe that would be more suitable title.

@franken0702

3 жыл бұрын

LMFAO

@tupak29

3 жыл бұрын

I laugh so much :D

@fixmymobilesireland1339

3 жыл бұрын

@@tupak29 nie ma za co :D

@JIC-DNP

3 жыл бұрын

EXACTLY!!! I was like... WTF-IGOHOTD? - What the fuck is going on here on this day???? 🤔🤔🤔🤔🤣

@bavanguron1846

3 жыл бұрын

Lol Laughing for exact 1 min 😅😅😅😅😅

Your burner assembly needs to be placed inside the body of the engine along with a couple of baffles, one separating the 2nd & 3rd fan and another one behind the 4th to create the front wall of the combustion chamber. The first baffle should reduce the diameter of the air passage and the 2nd blade needs to have the tips trimmed to be just a wee bit larger in circumference than the pass through in 1st baffle. The hole in the 2nd baffle should be a little smaller than the pass through hole in the 1st baffle and the tips of blades 3 & 4 trimmed to be a wee bit larger than the pass through hole in the 2nd baffle. I suggest one more baffle at the end of the tube where the conical nozzle piece attaches. It should be about 75% the diameter of the outlet hole in the nozzle. Your fuel feed lines should be introduced about 1/4 of the length of the combustion chamber back from the 2nd fan blade baffle. Will your engine work like a proper air-breathing reaction motor? Maybe. Right now your design lacks any meaningful back pressure. The narrowing of the pass throughs will create a marginally better amount of compression and speed up the airflow due to the improvised Venturi effect that the first two baffles provide. The third baffle in the rear in concert with a defined combustion chamber will allow a modest amount of back pressure and as the combustion gas exits through the last baffle’s pass through, it’ll expand in the inside of the nozzle and push against the inside of the nozzle and the rear baffle as the gases are exiting through the nozzle; this in turn will create some modest amount of forward thrust according Newton’s 3rd law. As an aside, with the modifications I’ve suggested, the fuel ports into the bottom of the nozzle can be repurposed with a secondary fuel supply and potentially act as a weak afterburner stage. Good luck.

@Swigglewiggle438

2 жыл бұрын

Jeez man

@mikebergman1817

2 жыл бұрын

@@Swigglewiggle438 Lol, intense.. But also accurate😆

@mortazah9826

2 жыл бұрын

Took me two minutes to read and figure out what tf you just said

@animekiss3311

2 жыл бұрын

brother u forget to mention where is the combustion fusion there is no fuse/ spark plugs and the air is not even compressed enough nor the structure is strong enough to withstand that kind of air pressure which a real jet needs let along if it can even survive the combustion from the fuel similar to car engine and then use that torque to push air and also control the intake propeller in front to balance out the air speed aka u increase the fuel combustion u also increase air intake and also get more compressed air to get in the ... what im saying is this video has no clue about what and how a jet works or even how to build a proper one this is more like a 9 year old making a small town city with toy type show case of jet nothing more then a gimmick

@animekiss3311

2 жыл бұрын

@E Van wait ?? turbine ? engine ? ur addressing + comparing it to something that has no similarity. plus that has no shape of a turbine. u can call if a toy thats more better

1.2m views as of this post x 12 minutes is 27.4 years of humanity wasted.

@xXxDeamonlordxXx

4 жыл бұрын

Thats why i jumped right to 12 minutes right away after reading the first comment... It looks like thats how common people look at gas turbines... Dont they inform themselfes how turbines are working before they glue something like that together?

@surindersingh5833

4 жыл бұрын

Absolutely right 🤣🤣🤣🤣

@solaymanislam2349

4 жыл бұрын

😚😚

@premdeepsethi4898

4 жыл бұрын

Hehehe

@truthconscience81

4 жыл бұрын

You think we saw it for 12 min? 6 sec

Nice, kids where I live are sucking on BIC lighters and making metal cones not turbines

@hightechredneck3362

3 жыл бұрын

Reminds me of when I was a kid. Got it wrong, but went on to learn. Like leokimvideo said, he's doing something. He'll keep going, he'll learn.

@Vilvaran

3 жыл бұрын

Waiit... Is this whom i think it is???

@Vilvaran

3 жыл бұрын

@the Teo leokimvideo - I'm pretty sure he's the redback spider guy! I remember watching the mantis VS redback videos, and the series where he kept a whole bunch in a tank, and would film the "life of redbacks"...

@yasminzahra3333

3 жыл бұрын

So how he have so many viewers

@Supercarlsunday

3 жыл бұрын

😂😂😂😂🙈

Very Cool! Although like the naysayers said, it is not a true "jet engine", as the combustion is not occuring between a compressor, and turbine, (yours is after the fan), the principal is still somewhat similar for demo purposes to younger people. Great job! You would be a great educator to spark interest for those who might decide to pursue the science of it further in life.

@Burlehmangus

Жыл бұрын

It’s not at all “somewhat similar. It’s just a fan blowing a flame. For educational demonstration, this is exactly what we don’t want.

@emilyhouse9642

Жыл бұрын

You're as dumb as she is

@NeilCrouse99

Жыл бұрын

I understand what you're trying to convey here and getting kids into science is something I'm ALL for. But my biggest bitch is our educational system in North America, mostly the United States, (sorry, truth doesn't care about feelings). We, in this educational system, have forgotten to teach our children how to think critically/rationally. And because of this people, don't mature with confidence in their own abilities to find truth in what's presented to them. Instead of maturing and growing up, people just get older and are easily moldable in their perceptions of sometimes what's right in front of them/us and obvious as things can be. But we have no tools to think in a rational/critical manner. THIS is why North Americans, score in the lower ends of first world countries in many, many areas.

@KanadMondal

10 ай бұрын

It has an afterburner but no combustion chamber, the idea of a jet engine is to compress air, not really to just make many turbine, the air is not being compressed just fanned toward a flame (as someone else said). It is very cool but after consideration it really is not similar to a jet engine.

@adrianreyes4702

10 ай бұрын

@@KanadMondal Yeah. Funny. It reminded me how when BBQing, I quickly get the flaming black coals red hot, ready to go in a matter of minutes simply by directing my leaf blower on full blast into the metal container. BBQing afterburners.

Whoah! This thing actually works. I glued mine to the back of my Toyota Corolla, and I got up to 250 mph! Then I ran out of lighter fluid.

@parasztfokaesayeti2857

4 жыл бұрын

Is that true? Please be honest

@jonathankeith524

4 жыл бұрын

@@parasztfokaesayeti2857 I'm just joking my friend. Haha It looks cool though! :)

@parasztfokaesayeti2857

4 жыл бұрын

@@jonathankeith524 Okay no problem. I'm just trying to find an actual working jet engine

@bomberex7809

4 жыл бұрын

Parasztfóka és a Yeti 2 bruh it’s a 1inch diameter tube that has no compression. Obviously Jonathan is joking. Like even a normal rc jet engine would barely effect a corollas top speed.

@parasztfokaesayeti2857

4 жыл бұрын

@@bomberex7809 I don't know what inch is I know the metric system and I'm not a jet engineer. I just want to make a working one at home which is strong enough to push things with wheels

Yeah sure. Let’s glue the turbine fans. Totally safe huh!

@NathanEDavis

4 жыл бұрын

I was wondering if anyone else noticed.

@lapajgoo4572

4 жыл бұрын

You probably wouldn't even notice one of them coming loose

@priteshhalwalkar3852

3 жыл бұрын

Hahahahaha

@ashishranjan1965

3 жыл бұрын

Bade bewakoof ho tm

@GODKNGBATMANNATUREFFAURA

3 жыл бұрын

Dude back off I believe the kid did well just showing the simplicity of it. So yeah it was obvious never to use glue to bind it but this was to show others how simple something like this is to people who though otherwise the opposite. Give the kid a break will ya. I mean like when I started all I had were thouse materials that this kid used when I was like 5 years old making and tinkering with some stuff did it ever occur to u that this is a less the 10 year old. Huh. Trust me when I say cause I make a couple million a year with my career as a master maker that this kid did a great job for a beginner lesson. But im sure the kids aware never to use glue irl for real flight. That's common knowlage. Duh

Nice job, but I see at least 2 big problems: - all your fans are on the same axle, which implies the air flow is at about a constant speed from the second fan. My works on propfan showed each step must be spinning at a higher speed than the previous one, which is essential with contra-rotating fans to avoid gyroscopic precession, but the idea is still the same whatever flow you're working on. - each subsequent step must be smaller than the previous one to increase air compression and thus speed at the output nozzle. To combine the two, the simplest is to have a single motor shaft with belts and each fan on its axis (all collinear) and proportional gear reduction. It's a tad more complicated than this one (because of the bets and the separate axes), but it makes it much more efficient. Also, how about soldering the pieces together (not even brazing or welding) once superglued to reduce the air leaks?

@success_studio

9 ай бұрын

Can we text?

@RegisMichelLeclerc

9 ай бұрын

@@success_studio feel free to email me. What I'm saying is that all the work is done by the first fan. The second fan provides no acceleration -- or something very marginal due to the fact that the first fan is not physacally "perfect", theory and practice may differ. On the second (and all further other fans), the input speed and output speed are pretty much the same if both fans are the same size and speed, even contra-rotating. Now, contra-rotating is the reason for the extreme noise, which is mostly generated between the propellers: Since your fluid is spinning in one direction and you're trying to reverse that spinning direction, so, yeah, your air will go from -speed to +speed, it's just perpendicular to the axis you want:and has absolutely no effect on the propulsion force, or marginally by accumulating pressure at the tips of your fans (not where you want it, unless it's severely funneled). Also, the distance between propellers is very important to avoid unwanted turbulence. If the sound is what you want, then it's fine. If you're looking for any form of thrust, think again. Have a look to Integza's channel, he's trying for ages to make a working jet. Also, if you want to explore that domain, you can have a read of NASA's report about... propfans (id 19870019120). It explores the physics and fluid dynamics of 2 contra-rotating "special" propellers and all the tests made in different configurations. I know, 476 pages... unless you're trying to build one to create something even better, that's a pretty boring read of 476 pages, but totally worth it to figure out what's hidden behind it. Enjoy!

@davidbwn

5 ай бұрын

Most crude working designs are on a single shaft. Should see what they do with truck turbos.

25 years ago before model jet engines were available commercially, folks were making them out of compaing gaz containers and using VCR head bearings. Someone was machining the compressors and selling them at flying events. This was pretty clever, but I doubt it can produce useful thrust.

This is just a flamethrower and unfortunately not a successful one. I don't think you understand the principles of thrusting and engines.

@harleyme3163

4 жыл бұрын

I think this is another one of those east indian video's trying to make them look smart... but alas, it always backfires and makes them look dumber. in fact if I knew how jet engines worked at 6 years old, I think these guys are going backwards in intelligence :-\

@beaumontmuni

4 жыл бұрын

it's more like a flame throwup!!! .. 🤮

@bugraduzyol1813

4 жыл бұрын

@@harleyme3163 If they try they can raise a person like Bose. But I started to think they don't even try these times.

@depinder

4 жыл бұрын

Chill guys , you seems like offended for no reason. Instead of saying his whole experiment wrong why don't you just say the title of the video is wrong and it should be flamethrower or something. Unlike you, english is not his first language and you should encourage people for what they are doing.

@ruthb.6789

4 жыл бұрын

@@depinder he did it wrong.

in the jet engine, the air is compressed and there the fuel is added then ignited in the compressed chamber, so the thrust is multiplied by the expanding air. And also the jet engine not necessary need turbine, as long it has continuous compressed air and fuel that exploded it can called a jet (turbinless jet is called ramjet engine) . But this video, fuel is at the end side of blade. Moreover it ignited at the outside. In conclusion, its just a rotor that bursting fire.

@wtkvslowguy

4 жыл бұрын

Bernard Ctxy yes this jet engine would have been a lot better with a proper combustion chamber and better fuel System

@glitchinthematrix5761

4 жыл бұрын

I think super glue is the wrong fastener to use in a proper jet

@ketchuplover3197

4 жыл бұрын

Bernard ctxy It doesn't matter how the configuration is, if it creates thrust it is a jet engine

@glitchinthematrix5761

4 жыл бұрын

@@ketchuplover3197 what he built is a model of a ducted fan with an afterburner. Wich is not a jet. It's a ducted fan with pointless afterburner. That would not creat any trust because you can't expect to get any pressure to build up inside the duct. Trust comes from fuel mixed with compressed air. You can't create pressure in a civ.

@ketchuplover3197

4 жыл бұрын

@@glitchinthematrix5761 of course, it impossible to create nessecary thrust to move with that engineering design It is just a 'flame with a fan'

I don't know when the definition of Jet engine had changed.

Good one 👍, try making the glue and spacers heat resistant and put them in fan- flame tube- turbine arrangement. You will have a real jet engine.

It’s just a fan with fire 🔥 😒

@prosniperyt-telugu7796

4 жыл бұрын

@@staticmode25 dude listen!!! for jet engine it requires turbine to drive the shaft again and again, and it is not simple as u think... even for a small jet engine rpm is 1lakh and u can hear super sonic sounds from engine.. heres I cannot see any turbines or internal combustion chambers, diving shafts etc.. and finally the engine in the video yes it is a jet engine (only for the people who have no idea on actual jet engine )😅

@somadityasohini6502

4 жыл бұрын

@@prosniperyt-telugu7796 true but it was fun to watch,,, noobs out there making a jet engine a miniature one hell na bruh not impossible,,,

@davidpayne4315

4 жыл бұрын

Just a pretty flame thrower

@BGTech1

4 жыл бұрын

Real jets engines are self-sustaining. This silly little fan flame thing is not

@MK-qh7jq

4 жыл бұрын

BG Tech bruh I’ve seen a plastic jet engine self sustain. This is kinda sad.

There's twelve minutes I'm never getting back.

@valak198

4 жыл бұрын

Watch how to make mini time machine.

@21centuryskiziodman

4 жыл бұрын

No sh!t . What a waste. .

@Aryan-yw7ym

4 жыл бұрын

@@valak198 hy

@devvart

4 жыл бұрын

classic

@noyalvolter

4 жыл бұрын

ha i just skipped to the end to see the result, therefore only 2 minutes is wasted😎😎

Even though this video wasn't what I expected....It can't be considered a waste of time..Good jugaad👏🏼

I'm just coming on here to point out for many of the people who are arguing below that it isn't a jet engine. This IS a jet, but it isn't an engine. What makes an engine an engine is the fact that on each cycle, more energy is released than is required for the next cycle. The next cycle gets the energy it needs, and the remainder of the energy is exhausted to the environment. Jet engines don't have cycles in the same sense as a piston engine, but they are analyzed the same way. For this to have been an engine, the energy released by burning the fuel would have to be captured in some way (turbines after the burn chamber) and put back into the input side for the next cycle -- to wit, if the prime mover (the electric motor) is removed and the jet doesn't self-sustain, it isn't an engine. As an aside, what this guy did was basically built a model salamander (those heaters that people have in their garages and on construction sites that look like a jet). Mind you, I'm using a practical definition of an engine, not the exact thermodynamic definition, though I've never seen anything to indicate that there's any such thing as a non-self-sustaining heat engine.

@_skyyskater

Жыл бұрын

underrated reply!

"At last. Marshmallow toaster is complete."

@024-venkateshkondaparthi2

4 жыл бұрын

😂😂😂😂

@bzxae7133

4 жыл бұрын

Epic

@dtx.montage1845

4 жыл бұрын

Hahaha

@trafficjon400

4 жыл бұрын

a small little toasty marsh- hole.

@sashragesh

4 жыл бұрын

Mythic

I knew something was wrong when the title said jet engine and the first thing he used is fevikwik....😆😆

@rohanexplore

4 жыл бұрын

exactly bro XD

@alexanderhurlburt2641

4 жыл бұрын

I whoud like To make that and mount it on mu scooter

@peterparkeer6265

4 жыл бұрын

True 🤣🤣🤣

@prisnrev5265

3 жыл бұрын

It's just a Jet Kid Toy, unfortunately it's not a real mini turbine jet engine that I imagine before. I have seen full view 12 minute and regret.

@Vilvaran

3 жыл бұрын

Ah fevikwik... that brings back some memories XD And yes, JET engine. Held together with crazy glue... I think the 3D printed engines might even last a bit longer; since the blades actually spin???

that was amazing. How loud was that little thing? Looks pretty sweet. Drank that fuel quick!

That Background noise thou😂👌

this is not a jet, this is an ordinary nozzle, there is no need to make blades, but just make holes in the radius, the only engine in this design is the Chinese motor

@lucianosantos2316

3 жыл бұрын

true very true

@prisnrev5265

3 жыл бұрын

It's just a Jet Kid Toy, unfortunately it's not a real mini turbine jet engine that I imagine before. I have seen full view 12 minute and regret.

Come on guys, give the Dude some credits, this is a legit jet engine, working only on afterburners, he has the compressor, doesn't have the combustion chambers, has replaced the turbine with the electrical motor, he has the afterburner nozzles. You got to start from somewhere, the Dude is really creative, I'll give him thumbs up. Good job Man!!! After you study Thermodynamics and gas turbine cycles in college, you won't be that enthused to make jet engines.

@maniacobroz6709

3 жыл бұрын

Yeah no it's just a fan attached to a flame... Nothing more

@PastelPiku

3 жыл бұрын

Liking the enthusiasm but yeah that's basically all it is lol

@unity20000

3 жыл бұрын

They did a number on you in college huh Stanislav... That's thermodynamics for you...

@howardbartlett3419

3 жыл бұрын

Not sure about everyone else, but I actually quite enjoyed thermodynamics. It actually has made me much more enthusiastic about engineering. But yeah, this is more of a boosed EDF than anything, but it is still exciting for someone who hasn't had much engineering experience yet.

@johnorabone6112

3 жыл бұрын

Come on dude, fancy cigarette lighter at best. Not even close to a jet or turbine

This guy: I made a jet engine with gum, glue gun , cigarette lighter and some pen refills NASA and aircraft designers: Am I a joke to you

@prisnrev5265

3 жыл бұрын

This is a joke and Prank Video, he just made a Kid Toy Jet engine

Very interesting! With some refinement, I can see that someone could actually make a crude, but workable jet engine like this a better than a toy!

That's not a jet engine, but still impressive and took time to make!

@yosltsum

4 жыл бұрын

this probably took 5 minute to make lol

@harryo1948

4 жыл бұрын

@@yosltsum it took some time right?😅🤷‍♂️

@prisnrev5265

3 жыл бұрын

It's just a Jet Kid Toy, unfortunately it's not a real mini turbine jet engine that I imagine before. I have seen full view 12 minute and regret. Wasted time

The title talks about making a jet engine. Me: sees cheap galvanized metal, goes to click out. This guy: *superglue* Me: *sits back down*

@yosltsum

4 жыл бұрын

s u p e r g l u e I died

Random Iodine Namak advertisement in background 😂 Struggle of every youtuber in India

In the beginning of the video, when I saw he was super gluing the little metal beam to the cylinder, I thought wow! That glue must be top tech that can resist jet engine heat! 😐

it certainly won't break any sound barrier anytime soon, view it as a scaled down simplified but with a similar concept to that of a jet engine, because what jet engine is it's basically a bunch of high speed turbine sucking in air from the front, pressurize the air in the middle, and combust it with spraying fuel as the air were being forced out at the rear at a very high velocity, thus achieving the speed of sound. believe it or not, the concept of a jet engine is actually simpler to understand than that of a regular piston engine which a car uses, because it really is just a bunch of giant fan and some pipe that spew out fuel, the rest is physics.

You made a cool lighter, that jet engine title is just misleading

With an adjustable gate, you could tune the afterburner too 🤗

I thought this was going to be a functional turbojet or something.. oh well it's a start. Got to have a compressor with tolerance so that proper compression takes place without pressure loss through intake, etc.. I define the jet by it's ability to self sustain,only use electric to start it up. I'd start with an old turbo or something.. I'm currently dissecting a Dyson for a small compressor wheel.. it is a start though sir..

watch from 12:16 Thank me later for saving your time.

@isaiahbenjamins8818

4 жыл бұрын

bruh

@timrogers2638

4 жыл бұрын

I wish I'd read down to your comment before pressing "Play"...

@purelife9081

4 жыл бұрын

And money😀

@mikuhorizon

4 жыл бұрын

Bruh

@phatbusted

4 жыл бұрын

Thank U Jesus !!!

Would make a pretty cool afterburner for a ducted fan. It looks cool as heck but doesn’t really produce any real thrust.

I like it when I got a video with the "How Jet Engines Work" title on my recommendation sidebar

This video at least gives you the idea that there are compressors, fuel supply, ignition and combustion chamber in a jet engine. I liked the video

SUGGESTED TITLE : HOME MADE INEFFICIENT BLOW TORCH

Title How can i steal someone else's time? or This is a way to spend time when a person infected with corona is isolated.

@yjw00712

4 жыл бұрын

한국사람 찾았다ㅋㅋㅋ

@user-ey4sg7dk1c

4 жыл бұрын

@@yjw00712 울릉도 동남쪽 뱃길따라 이백리 ㅎㅎㅎㅎㅎ

Muito bom Parabéns nota 10 Obrigado

Be nice to see how much thrust that multi fan turbine produces. Electric jet basically

Yup it is an edf with a post burner ;) try changing the motor with a drone one, they're ac motors and they cost almost nothin'

more accurately called: "fire amplifier engine"

@pooorman-diy1104

3 жыл бұрын

journey to mars is more economical now ....

OK, this is not a jet engine. But he had fun, and this is exactly the kind of thing I used to do when I was a kid. I didn't know what I was doing but I did my best, and learned a lot along the way. Eventually I got into the design and engineering of building systems. Kids, learn how to build things with your hands!

I built one of these in my 11th grade physics class. I had the VoTech school make the outer casing and my art department fired the compressor blades that I made out of clay. When we tested mine and used the after burner which moved 20 % of the fuel to the back, it tore off of the stand and went flying down the parking lot. It broke 2 10,000 pd bolts by shearing them off. I got my A in Physics.

@HyperMario64

Жыл бұрын

Holy shit this is how it's done 🤣 Good job that's so cool!

@decoderhacker4062

Жыл бұрын

That sounds so cool! I wish that I could build something like that in my physics class

Absolute waste of my time... 😧 Jet engine..... Sure...

@ekremerenler3851

4 жыл бұрын

I agree

@aayzersifer8584

4 жыл бұрын

royjeuring you try making something off scratch and uploading to KZread

@shaukatara8594

4 жыл бұрын

It is just waste of time

It's good for lightning ciggarates not a jet engine

@Laminar-Flow

3 жыл бұрын

It’s a model jackass not the point

@liamaustin8123

3 жыл бұрын

Chris S. not a jet engine.

@Laminar-Flow

3 жыл бұрын

@@liamaustin8123 yeah, its a model google what the scientific definition of a model is

@Frithials

3 жыл бұрын

ZZZ ZZZ are you that stupid? It’s a model. It’s not made for flying jets. It’s a *model* of what COULD be used to fly jets

@Laminar-Flow

3 жыл бұрын

Dead crab and that’s facts 🦀

I can imagine an aircraft with a very long cable to the power supply.

i hope he knows how much temp a jet engine reaches, that's enough to vaporise those glues and pretty much anything in it!

come on guys ,its a young man having fun n hopefully young children will be inspired with some messing about crafts no need for the immature comments

@KRIPP548

4 жыл бұрын

Teaching young children to be creative by playing with lighters and flames. Good thinking! DOH!

@illegallife11

4 жыл бұрын

This is cool when I was young I play with mirror and took apart my dad camera for the lenses and made telescopes now older I design and put together telescopes ... so this video here this young man one day can put us in a rocket because he might one day find the formula to go interstellar with out refueling

@BGTech1

4 жыл бұрын

I’m 14 and I’m a whole lot smarter then the dummy who made this

@illegallife11

4 жыл бұрын

@@BGTech1 ok lets see it make a jet engine up load it

@BGTech1

4 жыл бұрын

illegal life making a self-sustaining jet engine is vary difficult there are lots of calculations and simulations that go into designing a real self sustaining jet engine. By definition a jet engine is self sustaining and this one in the video is not. Therefore not a jet engine. There are simpler jet engines that are easier to make that are called pulse jet engines. I haven’t yet gotten the time to build a pulse jet because I’m so busy with school and more important things.

Second Video named " Windmills powered by Brushless motor"

@druls1111

4 жыл бұрын

It's not even a brushless motor

At least Efforts taken Truly admirable here as above who does this in slums as we hear background noise in a country like India ,for Aeromodelling enthusiasts and other scientific platforms there is little or no space at all, only the glamour, rich and mighty with little or no knowledge, or interest just pushed in for photo pics..Thanks to this lad implementing his soul to the tech world.

I could see some poor kid that isn't too bright waste a whole day building one of those, expecting it to propel his model airplane.

That was for a children to get the concept..... appreciate the kid effort....Bravo....

@ColinWatters

3 жыл бұрын

I wouldn't want my children to think this is how jet engines work.

@benzorabidbilly

2 жыл бұрын

Lol. Yep. Play with fire in, oh, bangladesh where there's no fire department and any kid can play!

@browse3761

2 жыл бұрын

seriously do u even know what is jet engine in first place ?

The video should be named like "How to make a mini stove with mini fans in series"

@Ryan-fy3ww

4 жыл бұрын

Should've named it how to steal someone's comment.

@ihateyoutubeidentificador

4 жыл бұрын

@@Ryan-fy3ww the comments gave me an inspiration, right?

@Ryan-fy3ww

4 жыл бұрын

@@ihateyoutubeidentificador 😂 seems legit

@ihateyoutubeidentificador

4 жыл бұрын

@@Ryan-fy3ww 😭👌

@prisnrev5265

3 жыл бұрын

This is stupid prank video, the title video must be How To Make A Kid Toy Jet Engine

At least a good attempt. A small step to towards realising a big dream ❤️🙏

in other words he could have just made a very simple flame holder to make it a whole lot more impressive

Jet engine should suck&burn fuel between rotors to initiate a chain reaction.

@beaumontmuni

4 жыл бұрын

Yeah this just sucks! 😝

If you clicked on this video actually expecting to see a real jet engine, I feel sorry for you. You should know by now that this stuff is never good.

@Quatuux

4 жыл бұрын

Clicked on it just to dislike it. Was not disappointed by the content xD

@BGTech1

4 жыл бұрын

This video is just a fan blowing on a flame. not a jet engine at all

Efforts are truly commendable than doing nothing..God Bless 🙌 such Efforts 👌

Literally no body Le every indian :- 5 Rs wala feviquick

"Jet engine" my ass! First, there are rotor stages, but no corresponding stators. Second, the rotor "stages" don't compress the incoming air. They merely accelerate it. Finally, the continued accelerated combustion of the butane is reliant upon the electric motor. If this were indeed a jet engine, a set of turbine stages being turned by the expanding combustion gasses would draw in air trough the compressor stages and sustain the combustion in the burner "can". This is about as much a "jet engine" as lighting a fart.

@putinirvladim3518

4 жыл бұрын

He almost set that thing on fire..🤣

@barryl8857

4 жыл бұрын

He used an electric motor to turn a couple of fan blades to blow a gas flame. Not even close to jet engine. What a fool

@crunchysoup406

3 жыл бұрын

can yall fucking chill out godam i would like to see you do better with the same tools and money he had

@timrogers2638

3 жыл бұрын

@@crunchysoup406- Nope. This isn't a jet engine. It's a fan blowing flames. I admit I couldn't do better with he tools and materials that he had, because jet engines are so precise that making one needs more than the tools and money he had.

@solutioni3394

3 жыл бұрын

nobody asked

man, a jet engine is not so easy to manufacture, but if you had made a combustion chamber not between the turbines but between them, maybe something would have happened

@yellow13_

4 жыл бұрын

We can build it Wait... not between them but... between them? What?

@wecanbuildit2196

4 жыл бұрын

@@yellow13_ that google translate

@Babihrse

4 жыл бұрын

He said not but yes

Jet engine which works by electric engine, GENIUS

to ma tyle wspolnego z silnikiem odrzutowym co ja z astronata :D hahaha

damn son you know you're making the absolute most of that itty-bitty bottle of Super glue!😁

Title should be "How to possibly start a fire and hurt yourself"

@superknightlol

3 жыл бұрын

like a real jet engine? you weebs

@prisnrev5265

3 жыл бұрын

Actually this is a Prank Video

I’m only 12 (although all of my teachers say I am incredibly smart for my age) and I know that this is not at all a turbojet engine (which is what he was quote on quote “making”) although you did get the first 2 stages correct, there are 3 stages which is where the exhaust spins fans behind the flame which are connected to the “fans” in the front which causes it to suck in more air which causes it to burn faster which causes it to spin faster which causes it to suck in more air which causes it to burn more which causes it to spin faster and this cycle repeats and, ba da bing ba da boom you now know how a jet engine works. Thank you for your time.

You can make the engine bigger. The bigger the better (as long as it doesn't get too heavy lol)

Say hello say hello to Garnier lite.. "intense salesman shouting"

this ain't a jet engine, although in fairness you did give me a few ideas there to miniaturize stuff, with a few mods on this design i think i can make a true mini jet engine. if nothing else, this design can take out a single robber's face if correctly-placed by the door at night (weapon of opportunity from household items; don't laugh at a steel spoon for being a steel spoon, in my hands i can stab that into someone's jugular or carotid attacking me while i'm eating), he'll still be alive, but now he has a real problem in his very face, his painful broken face is now his problem. thanks dude.

@prisnrev5265

3 жыл бұрын

This is a joke and Prank Video, he just made a Kid Toy Jet engine

Hm, I think it is just an electrically driven fan burner. It would be interesting to measure the thrust without and with butane.

You need to actually make the “fuel” power the jet engine, not have a fan blow some fire

Me : It's too frickin Risky Also Me : Burns a Jet engine

Me:Finally... HANS I'VE GOT ANOTHER IDEA FOR OUR PANZERS JAA hans:ooh jaa what is it Me:let's strap jets to ze back of it jaa Hans:JAA!

That is an just an Afterburner with no Combustion chamber. If you used metal spacers instead of plastic, and welded the pieces together instead of super glue, you can add in fuel injection ports between the fin pairs in the middle of the engine (Combustion Chamber) with their own fuel tanks (lighters) - not wide open like you did with the Afterburner fuel tanks. Then you run the motor as a starter as you ignite the Cumbustion Chamber fuel, then shut off the motor. The engine should run slowly on its own. Then if you press the Afterburner tank buttons the thrust will increase.

@eminstinct4114

Жыл бұрын

You also need ball bearings and to balance the blades or else it’ll never go on it’s own

Colin Furze does some mad things with home mad jet engines.

@EnriqueCastroRios

4 жыл бұрын

Colin is way better that this kid, he makes the a jet engine bigger than a real one, and hi make it in his home Colin is better

@himawansutanto-ri1tf

4 жыл бұрын

Up

@wingnutzster

3 жыл бұрын

Irrelevant, this is a mini model of a blow dryer

Why are the comments so negetive? I find this amazing

@friedec3622

4 жыл бұрын

yep, it's amazingly beautiful fire spitter

@dionjennings2379

4 жыл бұрын

Because your mind is simple

@MmmMmm24680

4 жыл бұрын

People just like to criticize. Ok he she gave a wrong title so all are up to slaughter him her. Sad world

@3bigbignig-abandoned

4 жыл бұрын

@@MmmMmm24680 True

Cool, that's the first ever battery powered jet engine

That's an afterburner with no jet engine...can you make it self-sustaining?

Engine=thrust No thrust =no engine

Great effort and creativity in trying to explain a concept, Although not very accurate on the working principle of a jet engine .. Appreciate what you have done. Cheers.

@thespectator3312

4 жыл бұрын

What concept is he trying to explain?

@johnhmielewski1230

Жыл бұрын

He said JET engine not motor controlled.

I strapped the jet I made to my back, "I can fly"

Did not realize I could use super glue to assemble a jet engine !!! XD

JET ENGINE! in ur imagination! Reality, gas stove powered by motor.

This is what isolaton has led me to 😔...now my IQ is lower after watching this...

@prisnrev5265

3 жыл бұрын

This is a joke and Prank Video, he just made a Kid Toy Jet engine . Corona effect make a content creator spending a time for useless experiment

@prisnrev5265

3 жыл бұрын

I spend wasted time watching full view 12 minutes video and regret, finally I realized that was something wrong in this useless video. Actually this is a Prank Video.

definitely the right concept. as for how much thrust this particular engine outputs though....

It actually works exactly like a jet engine. All he has to do is get rid of the motor, clip the fuel tank on, and throw it like a dart.

Thats why i read comments first than start watching any videos 😂😂

It looks like an afterburner without frame tubes without a jet engine

The Sabji man shouting out side reminds me of Bhopal many years ago.

"Thank you very much "I didn't thaught that this would be easy to create a jet engine

Wow, a multi-fan butane flame blower. Functions nothing like a jet engine.

There should be a compressor, combustion chamber and turbine. This is just an electric powered compressor, something that we could call a combustion chamber, but no turbine to spin the compressor. Please, take a look how jet engine works.

What a classic mind..... I love it

I'm skeptical that it's producing thrust though... It looks like a fancy torch TBH.

Not an engine but still looked pretty cool I guess (Edit spelling)

@sreeragramachandran8805

4 жыл бұрын

Exactly