How to make human size ceramic sculpture, series-Shrine, from sketching to handbuilding, part 1
Тәжірибелік нұсқаулар және стиль
Here I start to work on a new human size ceramic sculpture. This series are called Shrine. You can see I sketched the design, and then used varies of handbuilding techniques to build horse legs and upper sections. I hope you find this video satisfying to watch. You can also find other parts of this series through the links below.
Part 1: kzread.info/dash/bejne/apyA2cynmtC2cZs.html
Part 2: kzread.info/dash/bejne/fmRn06yefqW5p6w.html
Part 3 (Final): kzread.info/dash/bejne/m5uo0Melp8bOaJc.html
Chapters:
00:00 Sketching
01:06 Handbuilding clay sculptures
01:47 Making horse legs
09:41 Applying white slip to horse legs
11:10 Coilbuiding upper piece
15:00 Punching holes
16:30 Cleaning and please subscribe
The video recorded the process of how I work on ceramic sculptures. It is slow, quiet, somethings might be boring, but you may find it is satisfying to watch, too. I will make more of this if you like it. Please subscribe to my channel for more videos on ceramic art sculptures.
I am Wanying Liang, an artist based in upstate New York. I record the process of how I work on ceramic sculptures. The videos are mostly slow, quiet, sometimes might be boring, but you may find them satisfying to watch, too.
I hope you enjoy and please let me know if you've got any questions down in the comments. Please subscribe to my channel for more videos on ceramic art sculptures.
Thanks for watching and I'll see you soon with a new upload.
Website: wanyingliang.com
Instagram: wanyingliang
What if you want to purchase my works?
If you are in Europe, you can reach out to Ting-Ying Gallery (www.ting-ying.com/contact/).
For other areas or other inquiries, you can email me or send me DM through Instagram. My Instagram is wanyingliang.
Tools I recommend:
For cutting holes:
amzn.to/3kzoJva
Tool kit set for beginners:
amzn.to/3FcJHI0
For scoring:
amzn.to/3DBUlYN
Soft rib:
amzn.to/3kIcw7w
Wire stylus tool:
amzn.to/3wV1yk6
Mudwire:
amzn.to/3nkz2oH
Equipment I use:
Camera Sony A7 ii: amzn.to/3EvtPRP
Sony SEL85F18 FE 85mm F1.8: amzn.to/36u4XNM
Sony SEL35F18F FE 35mm F1.8: amzn.to/36u4XNM
Tripod for camera: amzn.to/3M9xoQq
Пікірлер: 164
The person who is reading this comment , i wish you great success , health, love and happiness ☯️ !
@oed84
3 жыл бұрын
thanks! and the same to you!
@STRAWBERRY-sl4sz
2 жыл бұрын
I wish the same for you and your family.
Mesmerized!
Incredible! Thanks for sharing your process.
@Liangceramicstudio
3 жыл бұрын
Thanks for the support!
Love slab & coil building. Impressive skill & creativity!
@Liangceramicstudio
3 жыл бұрын
Thank you!
Thank you for recording your process. I look forward to watching your past and future videos.
@Liangceramicstudio
3 жыл бұрын
Thank you very much.
❤❤❤❤❤
You are so gifted, thanks for sharing! I've been wanting to try sculpting with clay. Very inspiring!!!
@Liangceramicstudio
3 жыл бұрын
Thank you. I am delighted it could encourage you to work with clay.
Exquisite talent born by very few
Wow
Beautiful sculpture god bless you with a brilliant mind
@Liangceramicstudio
3 жыл бұрын
Thank you!
Thank you for sharing us your process... its very insightful. 💙
@Liangceramicstudio
3 жыл бұрын
Thanks for supporting.😊
Intriguing pieces of art! Keep up the amazing work Liang! 👌🏻
@Liangceramicstudio
3 жыл бұрын
Thank you!
your work is amazing!! it's inspiring to see you do this while also having a family. i hope to one day be able to make big sculptures like this in a cute country house 🪄
Iam a beginner ! Love your stunning sculptures . Thank you so much for showing how you can create a stunning patern. Love and kiss from the Netherlands
@Liangceramicstudio
3 жыл бұрын
Thank you so much!
@arinavandam9028
3 жыл бұрын
@@Liangceramicstudio I understand perfect that an artist dont wanna reveal their secrets but as a beginner its so fustrating that almost nobody want to tell how you can create something . I always tought that clay was a material for kindergarden not for grown-ups...!! I was so wrong I am totally in the opposite now I love it so much !! Wish that every one could see it that way...!! Thank you so much hope you will post more technics tutoral's in the future
😱😱😱 hayyy nooo.... ver toda esa cantidad de huequitos me revuelve el estómago....
Your attention to detail is very impressive!
@Liangceramicstudio
3 жыл бұрын
Thanks
I love the process your making from sketch to the technical form ceramic sculpture 👍 nice work
@Liangceramicstudio
3 жыл бұрын
Thank you very much! I may include more sketches in the future videos.
Lovely process video!
@Liangceramicstudio
3 жыл бұрын
Thanks!
wowww so cool!! not boring! Super cool!
@Liangceramicstudio
3 жыл бұрын
Thank you!
thanks so much👏👏👏👏♥️
@Liangceramicstudio
Жыл бұрын
Thanks for watching!
Thank you for your generosity
@Liangceramicstudio
3 жыл бұрын
Thank you.
brave! likes from Brazil, Rio de Janeiro.
@Liangceramicstudio
3 жыл бұрын
I’m so glad! Thank you!
Amazing!!!!
@Liangceramicstudio
3 жыл бұрын
Thanks
👍Great video. I love it.
@Liangceramicstudio
3 жыл бұрын
Thank you.
Respected madam. Wonderfull work.
@Liangceramicstudio
3 жыл бұрын
Thank you!
Fascinating and beautiful. It’s a privilege to witness your process.
@Liangceramicstudio
3 жыл бұрын
Thank you for your support!
Love your work so nice
@Liangceramicstudio
3 жыл бұрын
Thank you.
Fascinating
@Liangceramicstudio
3 жыл бұрын
Thanks!
love it
@Liangceramicstudio
3 жыл бұрын
Thanks
congratulations!! I'm from Brasil
@Liangceramicstudio
3 жыл бұрын
Thank you!
Wow that's so good
@Liangceramicstudio
3 жыл бұрын
Thank you
Bonsoir, beaucoup de patience pour faire un tel travail. Good evening, a lot of patience to do such a job. Bonne continuation. Good continuation.
@Liangceramicstudio
3 жыл бұрын
Thank You.
its super amazing !~!!!! just my trybophobia kiccked in,,,,, but what an amouint of crazy details and i have never seen such techniques with clay
@Liangceramicstudio
2 жыл бұрын
Thank you for the kind words!
Amazing work! I lack your patience hahaha
@Liangceramicstudio
3 жыл бұрын
Thank you. I really enjoy the process of working with clay.
Thank you. Extremely intersting, but couldn't find the 2nd part.!!!!!
@Liangceramicstudio
2 жыл бұрын
Thank you! kzread.info/dash/bejne/fmRn06yefqW5p6w.html Here is the link of the part2,you can find it in the description by the way.😊
Amazing
@Liangceramicstudio
3 жыл бұрын
Thank you
Nice work
@Liangceramicstudio
3 жыл бұрын
Thank you 😊
Very nice👍
@Liangceramicstudio
2 жыл бұрын
Thanks!
Very impressed with your work. I love working with clay but can only work on a small scale. Would love to see how you made the moulds. Thank you for sharing.
@Liangceramicstudio
3 жыл бұрын
Thanks for your support.
这泥条盘的也太好了吧😲
@Liangceramicstudio
3 жыл бұрын
谢谢
Do you always sketch before working on a project? Ps, really admire your work especially your MFA exhibition!
@Liangceramicstudio
3 жыл бұрын
Thank you! Yes, I sketch first. I need to calculate the size of each part.
perfect 👌👏🇩🇿🤘
@Liangceramicstudio
3 жыл бұрын
Thank you!
Gracias :)
@Liangceramicstudio
3 жыл бұрын
Thank you 😀
Awesome! Great work, did you cast the molds yourself? ✌️💪
@Liangceramicstudio
3 жыл бұрын
Thank you. Yes, I did with the help of my husband.
Liang, your artistry, technique and process inspires me to start this ceramic journey, thank you for sharing your talent.
@Liangceramicstudio
2 жыл бұрын
Thank you! I am so glad to hear that.
Next part please :)!
@Liangceramicstudio
3 жыл бұрын
kzread.info/dash/bejne/fmRn06yefqW5p6w.html kzread.info/dash/bejne/m5uo0Melp8bOaJc.html These are the links of part 2 and part 3.
I likeyou your art and you my dear sister 👍👍👍👍🔥😍😍😍😍😍
@Liangceramicstudio
3 жыл бұрын
Thank you
Congratulations on your great work. I would like you to tell me please: how do you control the drying of these large pieces?
@Liangceramicstudio
2 жыл бұрын
Thank you! I normally cover my pieces with a plastic bag after I finish them with one or two days. And then change the plastic into fabric to let them totally dry.
@rociocacerescastillo6170
2 жыл бұрын
@@Liangceramicstudio thank you very much!!!! 🌸🤗🧚♂️🌿🌷
Dishes. There is always the dishes to do.
Hi - thanks for sharing! I'm very new to this - what are the reasons you chose to build slowly with coil rather than a slab cylinder? Thanks.
@Liangceramicstudio
3 жыл бұрын
Thans for the support! Good question! I prefer using coil to build symmetric forms becuase it is easier to control the shape.
@pd4910
3 жыл бұрын
@@Liangceramicstudio Thanks for the insight - if I'm brave enough to try a large piece I'll try that! 谢谢
@Liangceramicstudio
3 жыл бұрын
@@pd4910 不客气!😁
Good
@Liangceramicstudio
3 жыл бұрын
Thank you
Goog ceramic, we from Indonesia make too
@Liangceramicstudio
3 жыл бұрын
Thanks!
Hi! Is this Clay “paper Clay “? Or Pottery Clay ?.... im having problems to find the right one .. what i find sometimes are with a lot of particules and dry very fast.. so fast that Start to have cracks...i dont know if theres something with the dry weather or it is the Clay ... love all your work ! You are amazing!
@Liangceramicstudio
3 жыл бұрын
I am using commercial stoneware clay for this piece. Actually, particles are good for preventing cracks. You may need to slow down the drying process by covering your finished piece with a plastic bag. I usually change the plastic bag into cloth after one or two days to let it dry faster. It all depends on your piece and the humidity of your studio.
@mosaicsandcakes
3 жыл бұрын
@@Liangceramicstudio thank you so much for answer me ... sometimes i do put some wet clothe and cover it... but the right small coil,piece i have in my hands cracks right away..and i dont know if its that ok or its a too dry clay to work with...but thank you so much !!!! i feel greatfull :)
Es posible reparar grietas antes de meter la pieza al horno?
@Liangceramicstudio
2 жыл бұрын
Yes, you may need to do it several times.
目玉おやじ。。。💛
非常好
@Liangceramicstudio
3 жыл бұрын
谢谢
@user-sb4ru8lr4x
3 жыл бұрын
@@Liangceramicstudio 华人?欣喜
@Liangceramicstudio
3 жыл бұрын
@@user-sb4ru8lr4x 是的,嘻嘻
Dear Miss, I would like to start sculpting with clay. Could you tell me some books that I can learn important knowledge on the subject and get technical details? Your work is quite inspirational!
@Liangceramicstudio
2 жыл бұрын
Thank you! A recently published book "Handbuilt Ceramics" by Jo Taylor, with my works among with several other ceramic artists, is really useful to see different approaches of handbuilding ceramics. I might be biased though... Another great book "Electric Kiln Ceramics: A Guide to Clays, Glazes, and Electric Kilns" by Richard Zakin, Frederick Bartolovic, and Sherman Hall is one of my favorite to start with. Please feel free to let me know if you have other questions later working with clay.
@istanbulmuskisi5705
2 жыл бұрын
@@Liangceramicstudio Thank you so much for all of this information! You are awesome... I am looking forward to starting to go to an art studio in Philly. I am quite curious about the possible discrepancies between real and practical difficulties, and easy-looking and smooth demonstrations of this beautiful art form... What would your opinion be? May I ask; really, what are the difficulties and hardships of this craft at different levels of perspectives that one would experience as going from being a novice to an expert? Thank you so much!
Что за инструмент, которым делают дырочки? Хочу его купить, как он называется?
@Liangceramicstudio
3 жыл бұрын
I think you can find some if you search hole cutter ceramic on amazon.
Are the leg moulds based off a live model?
@Liangceramicstudio
3 жыл бұрын
No, I made them. You can check this video for details. kzread.info/dash/bejne/pGuko8aAYdGohsY.html
How do make the mold for the legs, are you using animals legs?
@Liangceramicstudio
3 жыл бұрын
kzread.info/dash/bejne/pGuko8aAYdGohsY.html No, I made them. You can check this video for the mold-making process.
you are a very talented ceramicist. but this sculpture creeps me out lol
@Liangceramicstudio
9 ай бұрын
Thanks! Sometimes it does that.
Hi Lian Where we can find you ??? FR from Switzerland
@Liangceramicstudio
3 жыл бұрын
Hi, I'm based in the US. My email is wanyingling.ceramic@gmail.com.
@fefafafe5059
3 жыл бұрын
@@Liangceramicstudio Many thanks, After covid 19, I'll be there. I hope so. Best regards, FR.
잘 봐습니다 용도가 뭐예요
How did you make the molds ?
@Liangceramicstudio
Жыл бұрын
Please check the second video of my channel. I record the process of how I made the mold in that one.
@saraheveleduc
Жыл бұрын
@@Liangceramicstudio Thanks so much!
how do you make the mold?
@Liangceramicstudio
3 жыл бұрын
kzread.info/dash/bejne/pGuko8aAYdGohsY.html This video shows how I made the mold of the legs.
Your video is awesome. I also do art
@Liangceramicstudio
3 жыл бұрын
Oh thank you
Is this ASMR? I hear people say that a lot but never know what it means 😂
@Liangceramicstudio
3 жыл бұрын
Many friends told me my videos are like ASMR. I'm glad people enjoy them.
@leealan558
3 жыл бұрын
@@Liangceramicstudio you are very talented. Thank you for sharing your work with us. Your videos are really nice to watch
the finished project looks nothing like the sketch... although very interesting and creative in itself
@Liangceramicstudio
3 жыл бұрын
Thanks, yes, it looks different. You have checked part2 and part3, right?
@deborahb.3736
3 жыл бұрын
@@Liangceramicstudio no.. but I will your technique is fun to watch..
like I'm watching my soon playing with playdough
Nice work thank you but this holes! omg. makes me so uncomfortable. (Trypophobia)
@Liangceramicstudio
3 жыл бұрын
Hahaha, sorry about that.
Whatever that brain thing is it's doing a good job of triggering my trypophobia...
@Liangceramicstudio
3 жыл бұрын
haha, I hope you feel better soon
ETITS 🤣
Tripofobia
Looks like intestines...Disgusting!
@Liangceramicstudio
3 жыл бұрын
😂
Humans have been doing this type of clay work from day one. Its boring.
Wow
Nice work
@Liangceramicstudio
2 жыл бұрын
Thank you