If you have any questions about this video, ask me i will try to answer :)

@Comrade79

2 жыл бұрын

my drîll bosch gsb 550, what bearing code should i use to make the clamp?

@Comrade79

2 жыл бұрын

diameter is 43mm

@craftzars

2 жыл бұрын

@@Comrade79 just like mine, i used 62304 bearing with 52mm outside diameter, i think you can also use 6304, 6205, 62205, 1304, 2304.

@Comrade79

2 жыл бұрын

thx bro

That is the most creative use for that style diy linear slide I have seen yet. I shall now re-imagine another solution for a future project on the drawing board. Thank you!

I like your design idea and will use it, if I may, to build a similar drill press. The one I have in mind is to drill through up to 1/2" (13 mm) steel plate and 3" tubular steel, wish me luck. Anyway, thank you for taking the time to make this drill-press and to record, edit and post this great video.

awesome content

Şimdiye kadar gördüğüm en güzel fikir ile yapılan matkap tezgahı. Super

Cool Design 👍👍👍

great work man

Awesome.

I'm very happy found this awesome DIY channel. Love so much every single projects. More DIY projects please. Thanks you. Greeting from Indonesia.

@craftzars

3 жыл бұрын

Thank you. I'll post again soon, but I still can't decide what kind of video I like to make. i will definitely try some tool restoration vidoes. and don't know if the upcoming diy videos will be as detailed as it takes more time

Amazin!

Love your editing skills. Really good video and great design for homemade drill press. Best DIY one I have seen, well done!

@craftzars

3 жыл бұрын

Thank you for your kind words 😊

@craftzars

3 жыл бұрын

And i use it often, because thats a only drill press i got at the moment. And its hard to drill 90degree bore straight from hand.

cool

Dude lol always start your bit running backwards, or counter clockwise when stepping up a hole in metal... Or even wood for that matter... Then drill forward. Reduces the helicopters.

@craftzars

2 жыл бұрын

Thanks for the tip, will try!

خیلی عالی مرسی

PAINT IT ! :)

@craftzars

4 жыл бұрын

I cant choose a color :E

Why did you bolt the plate with the shafts on to the bottom plate rather than welding them? Also do you notice any issues with having the pull handle on one side only? (i might expect some non linear motion) Awsome vid!

@craftzars

Жыл бұрын

I like that it can be disassembled to be put aside if not needed, or easily modified

@craftzars

Жыл бұрын

standard bench drills are also only lever on the right side

@ghghghkkkkkkkkkkkkkk

Жыл бұрын

@@craftzars thank you for the fast responses.It helps alot. Bravo sir!

What the drill that you used ? It work ok with low speed

@craftzars

4 жыл бұрын

It was not expensive one. And on fix position its little to fast, so i will make update video with speed control on handle.

I am new suscriber, found your channel awesome. :) I am thinking if we could redesign it a bit so that it can house angle grinder as well and then can be used as grinder slider. I mean kind of combine this design and your angle grinder slider design(which you made in another video).. It will be then great reruse of parts and will be cost wffective as well

@craftzars

Жыл бұрын

Sliding drill press? 😅 i will think about it

@praveenagarwal8159

Жыл бұрын

@@craftzars what I meant is to use this slider mechanism part vertically for drill press and horizontally for angle grinder guide.

For me . 16 bearings are so much . I think i have idea about 8 bearings but still sure 😊

@craftzars

4 жыл бұрын

Will work with 8 bearings too. I just wanted extra rigidity but dont need that because hand drill chuck moves anyway.

@craftzars

4 жыл бұрын

And i got these bearings extra cheap for 0.20euro piece

@damianpinza9834

4 жыл бұрын

@@craftzars Why is the chuck moving anyway? I think it is excellent..

@craftzars

4 жыл бұрын

@@damianpinza9834 dont know about all handrills, but they chucks move/woble. And this drill have hammer function so if drill have solid/stiff type bearings , they will be damaged taking all hits or something like that 🤷

@damianpinza9834

4 жыл бұрын

@@craftzars ok i understand but the structure is strong maybe with a new or quality drill

The size of unp board ?? How thick is ?

@craftzars

3 жыл бұрын

i think it was scrap piece from UNP180 prnt.sc/10by512

Good quality but, too much expensive and waste.... You can use ordinary tube other than bearings....

@craftzars

3 жыл бұрын

🤔these bearings is super cheap, with just a tube there will be to much friction and i lost all precision what i got now...

Meh. It would be way cheaper and more convenient to simply buy a 20€ drill guide/stand. It's nice and everything but I don't see why would anyone be doing this.

@craftzars

4 жыл бұрын

if i count only materials it cost less than 20eur. and cheapest drill guides are terribly made wobbly crap

@expunkermikey

Жыл бұрын

Why? Because we can. And it's fun. And we can spend that same 20 Pazoozas at the Country Diner on a big breakfast before we start our projects!