I have done entire bathroom remodels that took less forethought than this baseboard!!! Holy cow.

wonderful tips...!!! Finally a good shadow gap talk...!!! Keep them coming, it's a constant request.

Outstanding attention to detail from all of you. I have been building for 40 years and have always had a goal to produce the most quality craftsmanship build in the industry. I can see that you run youR company with the same mind set. I love it when I see other builders that love what they do, do it right and care about the clients investment. OUTSTANDING WORK!

Such an intense level of detail and very well executed! We were planning on something like this for another job, maybe we try something else if the client doesn't seem to care. Thanks for posting this!

Talk about intricate details! Unreal. Keep up the good work!

@NSBuilders

4 жыл бұрын

Mikey Big thanks man

Amazing! Fantastic craftsmanship

Amazing work!! excellent videos, keep it up!

Absolutely excellent craftsmanship! The devils in the details! Keep up the great work and the great content. Aloha 🤙🏽

@NSBuilders

4 жыл бұрын

James'Jay Erlandiz appreciate your James

Unreal. A detailed video with the plaster guys would be amazing!

@NSBuilders

4 жыл бұрын

Mike Metzger coming up!

@a.f.575

4 жыл бұрын

Yes, agree with mike

@luke9822

Жыл бұрын

@@NSBuilders Did it ever happen? I'd like to see the final product of this detail installed.

Awesome work!

Having lived in an economical depressed area of the country this level of detail is mind boggling. Lightyears ahead of anything around here…… for example I’ve never even heard of blue board, trim less jams, or reglets 😅

Extremely professional🤗😉

Love your content! Great job

Love the level of detail, which we too strive to achieve. Clientele to fully support it is quite limited in our small market...

awesome stuff....keep it up, love it

Suggest a few modifications to your details. Cut the door jamb flange off below the base reveal including plaster bump. (not structual / allows wood base install after plastering). Saw cut in base should change to a rabbit 3/8" in ht / cut aluminum base flange down for 1/4" ear past bottom of reveal. (still get the floating reveal effect.) Changes allow base install after plaster work / base material could be say finish maple. Love the channel!

Nick I'm telling you... You and you're guys are second to none. Doesn't mean that some other builders may be 'as good' as you are, but I'll say it again; you are second to NOBODY. I watched this video after seeing your video about making cabinets where you did that small vanity. I've actually been retired for a few years now and have been recently purchasing shop equipment so I can start building cabinets and vanities and whatever else I feel inclined to build. I absolutely love and admire the detail you and your guys go to in order to deliver an exceptional product to your clients. Although I've been subscribed for a while now, I just noticed I had forgotten to activate the bell; I've corrected that issue at this point. ;-))

I just discovered this channel, and I love all the details. I'm new here, so pardon my ignorance, but do you ever show the finished details?

Is there anyone else doing stuff like this on Earth? Even multimillion dollar mansions don't have nearly this attention to detail. I've never seen such a commitment to fussy little problems - you guys are amazing.

@ArthurDentZaphodBeeb

4 жыл бұрын

This is a multi-million apartment

@renderwood

4 жыл бұрын

I see other US "premium" builders doing the flush baseboard detail. However don't recall seeing how it usually continues thru the door.

@NSBuilders

4 жыл бұрын

Plenty of guys doing it. We just happen to be filming it and sharing it!

@benmuirhead939

4 жыл бұрын

@@NSBuilders plenty of people are custom rabbiting base so they can cram a reglet into it to limit movement to 1 direction? Plenty of people think about what sort of epoxy to use? Plenty of people notch metal door jambs to create a continuous detail through a door? I'm no expert in this space but I've never seen anything like what you guys put out. You do amazing work. I wonder what you charge...😋

@jt5747

3 жыл бұрын

@@benmuirhead939 if you have to ask,......

Does the epoxy completely isolate against galvanic action as well? Not sure if this is a consideration for this application, but in aircraft structures, that steel to aluminum interface is a huge no-no. Curious if this is one of the advantages of using the epoxy to bring everything together. If not, have you had any experience with blistering or any filiform corrosion popping up over time? Always awesome content and so much pride in solving problems that are created from pushing the limits. I laughed at the "keeping up with the Jones' comment" because innovative work like yours is exactly what creates an opportunity for new materials, processes and implementations to be possible. I know you're proud of your whole team, as you should be. Thanks for all you contribute.

So I’m guessing the walls are going to be super smooth....holy cow, as long as the baseboards are all uniform that’s all you will see.....nothing beats those stair treads and the landing though! Awesome

@NSBuilders

4 жыл бұрын

Amber & Nena Dalydisanto super duper smooth!

I make sure never to show my girlfriend this channel, great work but good lord the time and expense for these details.

@NSBuilders

4 жыл бұрын

Fair comment ha!

@steven7650

4 жыл бұрын

@@NSBuilders Question though. How do you turn corners? Cut and bend so its continuous except for the miter?

@alexakulov991

2 жыл бұрын

This is our future no matter what we think. What our girlfriends think. This baseboard and trim less solution is our future. Just need to have those jamba on sale somewhere. Not distribution. Just click on website put on cart and buy. This is not working in Usa yet

intense!! I've had very good lasting results with WEST Systems epoxy in these types of scenarios. Did you consider using MDF instead of the solid stock? I would think it would be more stable.

Excellent video.. Where do you source those trimless door jambs??

I’ve binge watched so many videos and I live in an apartment 😅

Any idea what kind of pex manifold setup was in the wall behind you? Digital valves?

It would be great if you could show off the finished detail as a followup link in the show notes.

What hinges will you be using on those doors? Soss or something else?

What's not clear on this is the phase of the install of the base board. Traditionally, as we know, we drywall -> install flooring -> baseboard. While I love the wiggle room the saw cut provides in the baseboard for the reglet to slide into. How the baseboard installed after the flooring?? Are you doing the flooring first, then finishing the drywall? Would be a nightmare to fix that baseboard down the road if that's the case.

Hi! Do you have any follow-up videos for this project? I'm curious about the end product.

Unbelievable

whats with the boarding job on the wall to the right?

You mention the shadow gap reglet, would you provide a link to the product? Looking into using that on an upcoming project. Thanks in advance.

@NSBuilders

3 жыл бұрын

Pittcon Industries

Crazy complicated details - takes skill and $$$ to do it. Curious why you rely on epoxy rather than a mechanical fastener like screws to attach the base to the door frame? What sort of epoxy did you use? I really like how you get into the weeds on the details.

@NSBuilders

4 жыл бұрын

ArthurDentZaphodBeeb we will screw the flange as well? But epoxy for added strength and a more uniform surface.

@steven7650

4 жыл бұрын

@@NSBuilders Does the epoxy blend well with the paint for the wood? The smoothness of the paint on the epoxy i mean. You guys should do a longer series on just this series of details, you have a few weeks of material alone in this.

Great detail. Down here in south Louisiana I don’t see walls being plastered. It doesn’t matter if it’s a $100k house or $1M house they all use gypsum board so I’m not very familiar with what the advantages would be to go your route. Is it just for this detail or something you always do for some reason such as: something that is environmental based (does better in your climate), a pure esthetic preference, etc.

@NSBuilders

4 жыл бұрын

gsneff really don’t know WHY it’s just what we do

@sergeybebenin

4 жыл бұрын

Plastering has a number of advantages. These are the ones I can think of in no particular order: 1. Entire wall is smooth. With regular joint compound when you cover butt-joints, it's impossible to make it seamless... You just try to smooth out the bump over a larger area so it's less visible. Nothing like this with plastering. And details like in this video would look horrible without plaster. 2. It's a lot more durable. Regular drywall is just paper with foam board underneath. Plaster is like a thin layer of "cement".

@rogermw3

3 жыл бұрын

Colored veneer plaster finish, spoon rubbed is gorgeous. Google that. Drywall is spec home.

@billystray7007

Жыл бұрын

It's the area. we have tons of plasterers, so we do tons of plastering. It's a higher end finish because it's a lot like masonry . Also, it mechanically just moves along more smoothly in our New England building practices No going back and sanding . Etc... We actually don't really have an abundance of drywall companies in residential construction available to even call on , that kind of work is mostly done in commercial const..

Outstanding attention to detail! Does this scale up? Could any of this show up in production building?

@NSBuilders

4 жыл бұрын

Andre Butts we have seen it in production, and unfortunately the quality tends to suffer immensely

Excellent work But Good God, whats the average cost of one of your remodels? Customer- How much for a kitchen remodel. NSB- 2 million dollars

Do you mind sharing the flange products used for this? Thanks!

@NSBuilders

4 жыл бұрын

jlehm 1982 this one is from pittcom industries

@jlehm

4 жыл бұрын

@@NSBuilders Thanks man. Keep up the great work!

Would you share where to buy door jambs like that? Thanks

@NSBuilders

3 жыл бұрын

www.ezconcept.com/

Can you recommend a contractor/finish carpenter who can do this in our home in Redlands, Ca?

And that was the last house they ever did that way.

That’s a lot of money and time for base board.

.5" reveal? Won't that leave a pretty visible strip of metal there?

@BrianVarick

4 жыл бұрын

Cole Spolaric I think he mentioned painting them before install.

@ColeSpolaric

4 жыл бұрын

@@BrianVarick thanks, it doesn't take much for me to miss something if it's only briefly mentioned.

@ColeSpolaric

4 жыл бұрын

And now that I think about it, he literally showed them being painted. 🤦🏻‍♂️

makes your fukn head spin

Flush details require ridiculous labor. Now add that to rated wall assemblies has multiple layers.

Jeez.....if that ever needed to be repaired for whatever reason....that would be a biotch.

at least show a picture of it finished please

That's to easy, there would be no need to hire a Drywall contractor, you can do it yourself just don't drop any mud I mean joint compound or make dust and you have the world by the ass yes nothing but sunshine and bluebirds from here on out....

Not worth the effort..

Talks too much.. just show how it's DONE Onto others KZreadrs video