I give it 5 STARS for simplicity and ingenuity..... I would use a larger motor, prop, and battery...... Great video

@excellenceinanimation960

5 жыл бұрын

Do you know what motor he used and where I could get one a bit larger like it? I'm gonna try to make this for a rowboat. I would like to get some good speed as well and any suggestions on motor size would be a huge help. I want to get good speed maybe 9-10 nots if possible. I don't know how to find the propeller either. Is this design going to last? what should I be watching to keep it in top condition? Any information would be much appreciated!! (:

According to channels like this, if I just own a hot glue gun, I can send astronauts to space....

@sksk3044

4 жыл бұрын

LOL...you are funny

@jeffreymoffitt4070

4 жыл бұрын

Pretty much

@monkeytonker4637

2 жыл бұрын

The now politically incorrect a team used to do it🤣

@corneydasilva5831

2 жыл бұрын

If you own imagination! Skip games, social media and the couch!

@maximanpro635

2 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

you inspired me to made similar for my kayak! I'll use flexi shaft and motor will keep out of water! but idea is brilliant!

Parabéns amigo inventor,vc certamente seria um bom motivo para ser estudado pela NASA! Super like!!

@bilalbenserghin1601

5 жыл бұрын

Tu sabes escribir😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😩😩😩

Great you made it and you sailed also that what i liked. Thanks for sharing

@viejojorgge

3 жыл бұрын

Es dinero tirado, en cuanto se gaste (10 minutos) la goma que puso como sello de agua, le va agua al ruleman y al motor y adios....

Oh, this is brilliant

@forestandres5118

2 жыл бұрын

I dont mean to be off topic but does any of you know a tool to get back into an instagram account? I stupidly forgot my password. I appreciate any tricks you can give me!

@marceloenrique2294

2 жыл бұрын

@Forest Andres Instablaster ;)

brushed motor wont last long time, but like the simple build! If you want it to work, keep it simple, great engineer once said. water seal on motor shaft holding up well? computer fan blowing positive pressure into the pvc pipe may keep the water out?

@mysticwolf2842

6 жыл бұрын

A brushless motor would be better I have a few of them and they actually run faster than the ones with brushes.

@bobamericana3099

5 жыл бұрын

what you need to consider is the cavitation rpm for your propeller . faster may not be better @@mysticwolf2842

Im going to make a very important suggestion. Use PVC glue, not that stuff you were using. Silicon sealant is needed as well. And while I'm at it, definitely a bigger prop

@ryanrotten8595

5 жыл бұрын

Make one your self dip shit

@user-pt7qd5mf1x

5 жыл бұрын

ㅇㅅㅁㄹㄹ

@joemattox7525

5 жыл бұрын

Actual pvc glue holds better than simple weather strip adhesive. BUT the problem using pvc glue is this--- what happens if you're out and need to make repairs? With weather strip adhesive you can pull it apart.

@user-cs7ly9px3p

5 жыл бұрын

Guy H. rB6

@cwbutler47591

5 жыл бұрын

Yeah I would not be very efficient prop too small motor too small be okay for Putting around a small pond maybe let's just say I wouldn't lose sight of the dock

Hi, nice work! where did you get the rubber shaft sealing?

Fine design of boat and motor for calm days. You win the prize for lowest cost motor.

Freakin' genius. Love this video. Way to go man.

beats the hell out of rowing all day! good job

Looks like it worked. Not sure if it's water proof enough, but if you keep it turned upside down when not in use to let any accumulated water drain out, it should be ok. My minn kota 40# leaked for years(damaged shaft keep eating seals) before corrosion finally killed it.

not bad considering its made out of cheap materials the speed is great I rate it 10/10

wow good work bro

Thewater seal probably wont keep water out but thats okay because keep in mind people intentionally run these motors under water to break them in for use in an rc car. Great video!

Looks good in theory, but the shaft seal wont last long.

@pureenlightmen

4 жыл бұрын

I will say about 10 minutes, before the water sneak in...

@noahpeszel168

3 жыл бұрын

Maybe try using some rubber cement glue to glue the rubber seal to the motor and put grease inside the rubber piece so it stays still while the shaft spins freely

Hi... that look easy and possible to anyone , top👌 thanks for sharing

Good nice

The video is very good. Can you give me more specifications of the engine used !? Thank you!

@lloydpreddy

2 жыл бұрын

IT WAS A 775 DC MOTOR.

greta idea. i would use a brushles in runner motor that does not care if it gets wet. a firmer prop with metal spindle and a lipo battery of 5000 mah at 11.1 volts.

Nice work man. Hello from Turkey :D

Very ingenious. Works pretty good

Is it really waterproof?

B cho m hỏi mua cao su chống ngấm nước ở shop nào vậy. Cám ơn B!

Great DIY

good job on the motor, but I'd like to see more about the boat!

Nice Video

excelent, you made a best word with this idea.

Maravilloso !!!

good creative cool greetings success

A parts list sure would have been nice but still brilliant

How did the rubber seal work out? It looks like a design weakness to me.

Hi guy Where you buy your componements ? Thank you

Genial!! Es un motor de ventilador?

I would like to know if I made a boat like the one you did with 12v engine if I put a brushless motor 1000kv battery 4s it will work or I should make changes

Классный мотор получился !!!))))

Muy buena la batidora. Gracias.

Verdammt coole Lösung und noch dazu fast Umsonst die Röhre mit Kleber & Bögen Kosten nicht mal 10€... der Motor und die Batterie natürlich je nach Leistung. Werd mir so ein Ding für mein BellyBoat bauen, allerdings 2 strahlig und mit Metall Schrauben. Das Plastik Ding überlebt bestimmt kein Tag, ein mal Grundkontakt dann war's das. Gerade für BellyBoate eine Spitzen Lösung weil man die Halterung angleichen kann wie man sie braucht und es das Ding kaum Gewicht hat!!! Gruß Marco

Nice work

Enjoyable to watch your video

Good work!

where u get all these lil parts at?

cool vid but the motor wont last you covered the cooling holes and thermally sealed the motor

How did you get the Arial view at the end?

I think its better to immerse the motor with oil so no water can get in. It can also provide cooling property to motor without short circuit

Hi, where did you get the piece attached to the end.

can you share the link for the small rubber bushing. thanks.. its hard to find in the market.

Nice but.... Water will get in the motor very fast...

This is the best thing I've seen in a long time 🤗👍

You need to glue inside those hexkey screws as they loosen very easily over time.

Nice I would put some grease in the rubber seal. Can you provide the seal and coupler source- thanks

where i can find this watter seal? or something similar? thx

Chạy 1 thời gian có bị vô nước ko vậy bạn.

That’s very creative on a budget type of rig. What size is that dc motor by the way? After this video I did look up on dc motors and I see they have other motors that are much more powerful in terms of torque and rpm. You should upgrade your version by putting quad motors not just that but a more powerful motor with a custom made 5 blade aluminum propeller. Have it into the water 6 to 8 inches down in the water. Swap the battery out to 24v. If u want to be more creative use solar charge and see if you can get that inflable to plane over 15miles per hour all electric. Super light and powerful.

can i have the specifications of the motor that you used? the voltage and the current? thank you

Simple yet effective! But I would not wana sit in that tiny boat 👀

Olá meu amigo! Qual o nome desse conector da elici.?

Cool..!! A home made trolling motor.

Hi, can you advise the model of the propeller that you use?

Very good, thank you

What is the rubber piece used as a shaft seal?

From where did u get the rubber oil seal for the motor?

Badly need this for thesis can i ask for the material that was used in the vid.

Very awesome love the idea s

I am afraid. Dat rubber water seal which you used in the front is not going to hold.....

@carmium

6 жыл бұрын

That was what I spotted. Can't be spinning a rubber gasket and expect it to stay waterproof for very long.

@sup3rbird

6 жыл бұрын

It's under slight pressure to keep it sealed and it will be lubricated and cooled by the water so it could last quite a long time.

@ogrelg4131

6 жыл бұрын

+Harry не продержится и минуты. Это если не обращать внимания на то, что корпус двигателя установлен в пластиковую крышку не герметично.

@user-pl8od9gz5c

5 жыл бұрын

вода опасна для меди?

@patrickevanzgutierrez1706

5 жыл бұрын

what sealant do you recommend? i just need it for a project, thanks

Which motor did u use? How many rpm it has? Thank you

Not as fast as a jetski. But hay i say that is really well made. The build was very well thought of. But you went lazy on the finishing part. As you only used wires to attach it to the boat. You could have made a better system for that.

@bearheaton001051

6 жыл бұрын

what do you suggest doing for finishing it up? I liked the idea and also thought the button on the handle was lame. foot peddle of some sort maybe?

Yeah, but where do you get the parts at?

this is very possible, can you list the items used please...and where i can get them...

Serves for what?

Nice vbio

It's really excellent video

Est ce que c est adaptable sur un float tube ?

good work can u give me motor Specifications

WoW super like

Bagus sekali ide nya

Where can we buy the rubber and connector to propeller??

whats the referenceof motor? its great! and batery what you use?

nice idea

Nice Work

Nice video but it's NEVER A GOOD IDEA to stick your fingers into the solvent of a PVC weld. It introduces skin oils etc.

good idea..)

WHOW..very good

you can add a solar panel so that you can have a roof also to protect you from heat while fishing

Shut the music OFF and do some talking in it's place. Also, play the sound track. I want to hear the machine running when you are working it. I want to hear you explaining it in progress. See this old house,

@picker2266

6 жыл бұрын

Microphonix Virtual Studio who cares what u want!!!!

@hocstudio1638

6 жыл бұрын

The creators of this video is from Viet Nam, I believe they can't speak english very well for you haha

Amazing video. Works great. But i do have 1 question and its just from pure curiosity. Why, in videos like this i see, do people not cut their pinky nails. Is this a religous thing.

Nice video but where you get that rubber piece from? The one that goes over the motor shaft( spindle)

I also subscribe and like your video

Can the propeller be bigger?

Thats 12V 150W 13000rpm 775 DC Motor ?

outstanding idea

Nice now u just need a big bracket with quads and your deep sea fishing in your lake lol

Nice video and good idea

Where did you get the propellor?

but the speed is little slow

@serdomal8796

4 жыл бұрын

no shit sherlock

@alburritox4475

3 жыл бұрын

no shit sherlock

@GhostlySpectral

3 жыл бұрын

I mean you don't have to use the same components that I he used inside the video you can actually find like more powerful components that are actually use them both to increase the speed more it's my own opinion

A ten pazur to do dłubania w nosie...? Czy gdzie?

Looks like a wading pool with a toy motor,but a great idea!

very nice~

what do you call that rubber thing? the black one.