wen DIY BUILDER meet CNC crafting, the result will be great...

Certain videos don't mention this, but the chassis comes with excess track. Easiest way to remove them is with a paper clip that fits and pushing out towards "teeth"-side out of the track, and using pliers to pull them out.

I love your DIY projects it's so cool thank you so much I have a request can you make PIR sensor automatic switch for lights and if possible with Google assist

@DIYBuilder

4 жыл бұрын

I am working on Google assistant enable home automation system. Soon i will upload the video

Please make a video on the coding of a Quadcopter (Drone)

Different and interesting baground music

Where did you get the body ( metal stock with chains ...)

good explanation and you already attached code, circuit diagram and app. thank you very much.

Which apps do you use to control this and the voice controlled robot?

Amazing project. Please give us the code link and the circuit as soon as possible. 🙏

Great educational video 👍! I have a question would this or is it the same using a Bluetooth Bee ? if so is the code still the same ?

Looking at the wiring diagram, on the Blue Tooth module RXD goes to TX on the Motor Driver Shield and then TXD goes to RX on the Motor Driver Shield. Is that correct or is it reversed? Not everybody has an Android device. Is there a way to use this with iPhones and iPads? Has anybody used this to build one that uses regular RC components and controlled by a land based transmitter and receiver?

How to you ensure left and right wheel speeds are equal in order to move in straight line?

Hi great video. What's the BT controller app that you used?

Id like to attempt to build one the size of a coffee table or a bit smaller. To have a fun way to carrie my tools and parts around the job site.

can you use this track kit to add it to your product

Best youtuber Pls do a giveaway......

Great video, and thank you. I've watched a couple of your builds (just found you and subscribed) and wondered which you felt had more power? Specifically, on dirt.... this one, the one with the Gear Motor TT, or other I've not watched yet. Secondary question, is there any way to hook up a camera (arducam or such) with the motor shield? Never used said shield, mostly CnC/3D shields, but had the idea to build such a device to send under the house and HOPEFULLY, scare out whatever's living under there..... So a camera (even if sent to another device as phone has control app) would help/be needed for the steering.

@DIYBuilder

Жыл бұрын

Thanks, man and it's possible to attach a camera

@kennyantonio8284

Жыл бұрын

​@@DIYBuilder para ponerle camara y ver lo que está en frente del robot no sería una cámara que funcione como la que tiene algunos drones.

Very good project 👍

Bro when i plug the power in to shield it makes a beep sound and when I searched on internet it says l293d motor driver shield can't handle the current req. of motors

PLEASE MAKE A VIDEO ON MUSIC REACTIVE LED STRIP LIGHT THAT CAN BE ALSO USED BY SOUND BOX AND EARPHONE . PLEASE PLEASE

super work dear

I like your project you are best

Can't you can make a car with voice control , hand gesture, line folower, Bluetooth, remote control, spy cam, mic, obstacles detector all together in a small car using Arduino

Darun hoye che Dada 🥰😊

I know you're doing this to work with an Arduino, but what about using the same Black Gladiator with 2 ESC's and a DumboRC 6 channel transmitter to control it? Can you tell us how to hook up the ESC's and how to mix the channels using the land based transmitter? No offense, but it might be nicer to control the tank using a transmitter rather than a phone. Thanks.

Hello guys, when i purchase those parts are the wirings already included? or am i required to purchase the wirings separately?

Great job bro😎😎

Great job with arduino project

If i want to code on 4 motor what other changes i have done

Can you use a radio receiver and transmitter instead of wifi with this?

From where did u get the wheels for it??

Good work

Kuch aasa banav jisme ardino. Motar servo. Light. And different sabse alge ho .....

Well done bast friend good work 💚 💚 💚 💚 💚 💚 💚 💚

there is this one problem when u disconnect, the car will spin. How do you fix this?

I rebuilt the robot and used your ino and the app. Everything works ... except for "stop". The robot leans forward, back, right and left perfectly steer only he does not stop. Only when I press the button on the Motorshield does the robot stop. Why is that? What have I done wrong?

@lucascato3866

4 жыл бұрын

Had the same issue, the error is in the code. There is a case statement for stopping the robot that isn't called. If you call the statement it works fine.

@TheBrockbencomo

3 жыл бұрын

Which code did you change. Once mine goesit wont stop until i turn off or hit reset button

@Igor-xo3zx

2 жыл бұрын

@@TheBrockbencomo guys, do you solved this problem? Which part of code I need to change?

@Igor-xo3zx

2 жыл бұрын

@@lucascato3866 Hey :) What I need to add to code for stop?

How instal the software to mobil to connect to rc car

Can we use normal tyres instead of those in the video

Can i use spp-c Bluetooth?

Wonderful robot tank bro

@surajitmajumdar7620

4 жыл бұрын

Thanks bro 😁

Hi can this combine with arm robotic ?

Great😁

Can we use 3.7v BATTERY for robot

Bro can you please help me out with my project i am making voice controlled excavator so i need a code for arms can you please make video on it or can you provide the link (codes ) for arms

Can someone recommend a site to but a metal chassis like this one?

Hello, I have completed your project. I have a question. When I energize, the motors start to spin continuously. What could be the reason for this?

Greaaaaat video keep it up man

Creative!👍

@DIYBuilder

4 жыл бұрын

Thanks

can i use HC-06 Bluetooth Module??

Superb

Where i can buy the tank chassis?

Can you make an underwater car with lights and camera?

Hello do you buil a nRF2401 control transmitter & reciver and autonomus. Car

Instead of the arduino can I use the Microbit?

Make a robot controlled by flysky fsi6

Can u tell about the motors u used. Please

thanks i love you video thanks zaatri very very good

Awesome

Tq for ur sharing.. how to make rc via smartphone.. what app u used..

How do I reduce the length of the track?

Broo, where can I download the .zip AFMotor.h Library

Very nice

tiger tracks and wheels nice

Can i programming this robot bu coding python or any other language?

Sir, I love the robotic car using Arduino. Sir, can you make a video on how to make an Arduino Uno Xbox-controlled 6-dof robotic arm car using the wireless USB gaming receiver adapter for the Microsoft Xbox 360 controller, and can you give me the circuit diagram and the code for the Arduino Uno Xbox-controlled 6-dof robotic arm car using the wireless USB gaming receiver adapter for the Microsoft Xbox 360 controller?

Yo can you send me the coding of onstacle avoiding car

Could you build a robot that could build a replica of itself only slightly smaller, and if you could how small could it go?

How do you recharge the battery’s?

Hey it's a very nice video.. the link for the chasis is wrong can u get it fixed pls

can i use l298n?

We can increase its speed ??

I guess DIY now just means buy it all and out it together

Nice amazing

@DIYBuilder

4 жыл бұрын

Thanks

Nice

Do u sail it

Meterial kan sa aap se order kiya

Or also we can make it &share APK by arduino turitorial not pro version plzz answer me

Can you please send me the code for the blind stick with nano arduno with ultrasonic sensor

wow i love toy to

Hlo does all the project works only by arduino turitorial pro

Where is the app that you show in this video?

Very nice.

@DIYBuilder

4 жыл бұрын

Thanks

From where did u get the app or u made it by yourself.. I don't understand?

i got questions, i tried your codes setspeed (10) but 10 doesn't make the motor to work so i replace it with 100, i don't get it why you give the command 10 that doesn't even make the tire to shift? if you were planning to make it stiff why you didn't give set speed (0)? something wrong with your codes or the tutorial, after uploading the codes and using the arduino bluetooth app when i press forward 1 tire works but too slow (i check the set speed it's 255, but the speed was like 100) the other one didn't, but if i press backward both work, forward left both tire didn't work (idk why), left only 1 work and so slow the other one didn't (idk why, nothing's wrong with the codes, and nothing's wrong with the circuit because i followed your circuit), can you help me? at last but not least when i use battery holder A3 it didn't work it gives the power but not enough to power the whole things, A3 and A2 are the same 1,5V but in your video you can make it work with batterai holder A2, can you answer this?

Điều khiển được trên điện thoại hay tuyệt vời!

Nice as always. Well done

@DIYBuilder

4 жыл бұрын

Thanks bro 😁

Can I get the spares?? what does it cost

verry nice

Can you built a bluetooth car with arduino nano r3 board

where can u buy the first parts, with the gear wheels, bearing wheels, and metal base

@JonathanGarry

3 жыл бұрын

reply pls

Nice robot...

@IndianTechCreator

4 жыл бұрын

Hii

What is the funtion

Hi, I'm building your tank, but I don't know what App to use for IPHONE that supports HC-06, because right now I'm at that point to connect the Bluetooth.

@sacondese6605

4 жыл бұрын

Did you find anythiny

what is the weight of the whole setup?

Without using this batteries what else i can use please reply.

@DIYBuilder

4 жыл бұрын

You can use two old mobile batteries

Plz share the circuit diagram as soon as possible

Can I get this full project at how much price

Bro ur videos are like same.pls make diffrent videos.(btw i like your vidos)

@DIYBuilder

4 жыл бұрын

Coming soon

Bhai programming kaae karte hai

Nice 👍

@DIYBuilder

3 жыл бұрын

Thanks ✌