Beautiful work!! Do you save and reuse the mineral oil between batches or do you have to dump it?

@LTDWoodworks

3 жыл бұрын

Thank you! Yep, I save it. I need to do a better job of getting the sanding dust off the wood before I soak the boards. There’s quite a bit in the oil. But I don’t think it’s going to effect anything. This method is much easier so give it a try. Just clean the boards real well unlike me😉

@joebyrne98

3 жыл бұрын

@@LTDWoodworks Thanks John!

@miketaylor9258

3 жыл бұрын

Beautiful work, how thick are the boards, and any idea of the moisture content? Cheers from Nova Scotia

@ericwilliams538

3 жыл бұрын

@@LTDWoodworks I pretty much do the same thing with my mineral oil. Reuse it, after soaking my wood sculptures in the oil. Yes, some wood dust, and little chips get in it, but I have never had any issues with the end result.

@LTDWoodworks

3 жыл бұрын

Thanks! My boards average around a 1/2” to 3/4”. And they are dry around 7 to 9%.

Absolutely gorgeous mate, big thumbs up. Thank you for introducing me to your work lovely 👍👍👍

So beautiful, thanks for making the video.

@LTDWoodworks

3 жыл бұрын

Glad you enjoyed it!

Thank you for a great tutorial!! Lots of good information for a beginner like me!

Gotta love walnut charcuterie boards 😊

@LTDWoodworks

3 жыл бұрын

Yep, my favorite!😊

That was gorgeous walnut. Mighty fine charcuterie boards❤

No! It looked so nice before you cut the bark off! What abummer! I guess that raw edge look isn't for everyone but dang... it's so gorgeous!

@LTDWoodworks

2 жыл бұрын

Ha, ya, I don’t have the trust to sell them with the bark on. Always worried it will come off at some point. Oh well, these still sell like hotcake during the holidays! Thanks for watching!👍

These are amazing! I'm stepping my game up now!

@LTDWoodworks

3 жыл бұрын

Thank you! So far I'm getting lucky and finding wood with great grain patterns. I've started saying "I let the wood do the talking", meaning I let it decide sometimes where to make cuts for the shape. I think that really makes a difference. Thanks again and thanks for watching!

They turned outvery beautiful! 👍👍

@LTDWoodworks

3 жыл бұрын

Thank you sir!

Your boards are simply GORGEOUS 😍😍😍

@LTDWoodworks

3 жыл бұрын

Thank you! Won’t be long before another batch is ready to be made. Thanks for watching!👍

Absolutely beautiful

@LTDWoodworks

2 жыл бұрын

Thank you!

Good job on all here...video, production, details on flattening the boards etc....I especially love the mineral oil bath....Its like watching an explosion of grain and color.

@LTDWoodworks

2 жыл бұрын

Thank you and thanks for watching! Yes, that bath is always my favorite part too👍

The boards look beautiful!!!! Absolutely wonderful job. I am working on some things for Christmas gifts and your tips will come in very handy!

@LTDWoodworks

3 жыл бұрын

Thank you!

Fantastic tips for a beginner like me. Sincere thanks my friend.

@LTDWoodworks

3 жыл бұрын

You’re welcome! And thanks for watching!👍

I love Plaining, it is one of my most favorite things next to paint and staining things 🥰

@LTDWoodworks

2 жыл бұрын

Mine too! Thanks for watching!

So very helpful. Thank you.

@LTDWoodworks

2 жыл бұрын

You’re welcome and thanks for watching!

Excellent video - making some of these for my wife’s Celebration of Life

@LTDWoodworks

2 жыл бұрын

Thank you. Sorry for your loss. If you ever have any questions on making your boards just let me know.

Awesome, John! I love the look of the live edge!

@LTDWoodworks

3 жыл бұрын

Thank you!

They turned out amazing, and that walrus finish also looks really nice! Odies oil is also supposed to be food safe.

@LTDWoodworks

3 жыл бұрын

Thank you! Ya, I’ll have to look into Odies. It’s always good to have alternatives for something 👍

I love tray❤your DIY products very nice. Thanks you for sharing

@LTDWoodworks

2 жыл бұрын

Thank you and thanks for watching!

They look great!

@LTDWoodworks

3 жыл бұрын

Thank you!

Love these!

@LTDWoodworks

5 ай бұрын

Thank you and thanks for watching 👍

Just gorgeous!

@LTDWoodworks

Жыл бұрын

Thank you!

Thank you very much for sharing your wonderful talent sire very awesome

@LTDWoodworks

2 жыл бұрын

You’re welcome and thanks for watching!

Great video...good use of camera/angles...appreciate all the work!

@LTDWoodworks

3 жыл бұрын

Thank you and thanks for watching!

Oh these look beautiful! You did such a great job on them. The finish really makes them pop. Kudos!

@LTDWoodworks

3 жыл бұрын

Thank you so much guys!

@ronaldlewis1158

3 жыл бұрын

Very nice

@LTDWoodworks

3 жыл бұрын

@@ronaldlewis1158 Thank you!

Small time wood worker here. Mainly pens and bowls. Going to pick up my first slab of Black Walnut today, to "try" to make some of these. Yes, I agree. LOVE black walnut as well. Thanks so much for taking the time to show the process. BTW, I hate sanding... :) it comes with the territory I guess.

@LTDWoodworks

Жыл бұрын

Great, hope they come out well for you! For sanding, yes, it's a pain but the effort is well worth it! Thanks for watching!

Love how that mineral oil enhances the natural beauty of the walnut. Well done

@LTDWoodworks

3 жыл бұрын

Yes, like I said, my favorite thing to do it to put on the oil!😀 Thank you and thanks for watching!

Very good explanation on how to make the cutting boards. U dun good. Thanks

@LTDWoodworks

3 жыл бұрын

Thank you and thanks for watching 👍

I had wood shop in jr high school I’m 51 now…and I hate that I didn’t know I would be an artist later in life because I definitely would have paid more attention and learned a lot more! I truly respect your work sir!!!

@LTDWoodworks

Жыл бұрын

Thank you! I to had shop class in high school. Made nothing like I do now😉 Wish schools would bring that class back. So worth it for many reasons 👍 Thanks again!👍

So beautiful

@LTDWoodworks

5 ай бұрын

Thank you 👍

Beautiful stuff 👍👍

@LTDWoodworks

2 жыл бұрын

Thank you!

Nicely done. Great Job. 👍🏻👍🏻👍🏻

@LTDWoodworks

3 жыл бұрын

Thank you and thanks for watching!

@LTDWoodworks

3 жыл бұрын

Thank you and thanks for watching!

liked the glue down planner sled idea

@LTDWoodworks

3 жыл бұрын

Thanks, ya, it works great! I use it all the time. Thanks for watching!

Cool looking shop. Nice tip with the glue gun. Nice boards. Thanks for sharing.

@LTDWoodworks

2 жыл бұрын

Thank you and thanks for watching 👍

Lovely work

@LTDWoodworks

2 жыл бұрын

Thank you and thanks for watching!

Great work👏

@LTDWoodworks

3 жыл бұрын

Thank you!

Lovely job John, really like these! I've recently been using a surface planer and I could watch flat boards come out of there all day long lol, so satisfying!

@LTDWoodworks

3 жыл бұрын

Thanks! Ya, it’s like finding treasure sometimes. The board you just saw on my Instagram I had NO idea it would be like that in its rough form. But after a few passes, boom, perfect grain pattern👍

@tfturning

3 жыл бұрын

@@LTDWoodworks Absolutely, soon as I saw it I had to watch the video! 👍

Dang that’s some beautiful wood. If you ever start to hate walnut let me know. I know someone who could take it away for you. Great job on the boards.

@LTDWoodworks

Жыл бұрын

Thanks! Ha, I keep all my walnut locked up nice and safe where no one will ever find it! Hahaha 🤣 Thanks for watching!👍

@ElCidPhysics90

Жыл бұрын

@@LTDWoodworks lol. You’re welcome

Beautiful

@LTDWoodworks

3 жыл бұрын

Thank you!

These are beautiful mate, great attention to detail 🎥🔨👍, greetz from Australia

@LTDWoodworks

3 жыл бұрын

Thank you and thanks for watching!

Thank you

Hey LTD Woodworks, very nice job.

@LTDWoodworks

3 жыл бұрын

Thank you and thanks for watching!👍

Love it.

@LTDWoodworks

Жыл бұрын

Thank you and thanks for watching!

I make my own finishing paste. I use mineral oil and bees wax which I heat up in a double boiler to blend.

@LTDWoodworks

3 жыл бұрын

It's on my list to one day make my own. For now for the sake of time because of my busy schedule I use the Walrus oil or similar products. Course maybe I can get my wife to help and make some up🤔😊 Thanks for watching!

These boards look great and keep up the good work . I'm getting into this after we get rid of all this snow and I can actually access my garage lol . Canadian winters are sooo much fun lol

@tommontagliani690

2 жыл бұрын

Also gonna do some stained skid furniture but with a twist . I'm gonna use a wood burning kit to incorporate my logo . I can't wait till spring lol

@LTDWoodworks

2 жыл бұрын

Ya, my winters are no where as bad as yours. We just had about 7-8 inches which is no big deal. Still wish it would melt quickly as it’s been over a week. Thanks for watching and good luck on your furniture!👍

@tommontagliani690

2 жыл бұрын

@@LTDWoodworks we got almost a foot and a half over night. It was fucked lol . Haven't seen snow like that in about 10 years

Nice job.

@LTDWoodworks

3 жыл бұрын

Thank you!

The best!

@LTDWoodworks

2 жыл бұрын

Thank you!

i agree beautiful work. Should be called "how to charge 50 bucks for 20 dollars worth of food...and what the hell is a razorclam :)

Great video!! Adding a couple of hand planes to the mix would greatly reduce the time and amount of sanding you have to do.

@LTDWoodworks

Жыл бұрын

Thanks! I’ll give that a try next time I batch some out. Thanks for watching 👍

nice work

@LTDWoodworks

3 жыл бұрын

Thank you and thanks for watching!

I'm tardy as always!!! First video I've seen of yours. I clicked all the bells & have visited Etsy. Fabulous work! 🔥🔥🔥

@LTDWoodworks

2 жыл бұрын

Thank you!

Thanks!!!

@LTDWoodworks

2 жыл бұрын

You’re welcome!👍

Supported you for free by liking, subscribing and commenting. Thanks for the video! I really liked the flattening board idea using the hot glue.

@LTDWoodworks

2 жыл бұрын

Thank you and thanks for watching!👍

Now I know what to do with my scrap planks of walnut!!!

@LTDWoodworks

3 жыл бұрын

Ya man, go for it! They sell real easy especially right before the holidays 👍

Really super beautiful and very informative. Definitely subscribing. You said you let them set for an hour, does that mean you leave them in the oil for an hour? If not how long do you let them soak? Thanks!

@LTDWoodworks

3 жыл бұрын

I would say for face grain boards like these up to an hour is just fine. I have actually done far less and have seen no difference. Just last night I made a board for a family member and left it in there for five minutes. Seems just fine to me. Sometimes my busy schedule just gets in the way and the boards soak for longer than really needed. Which I personally don't think is a bad thing. Now if these were end grain cutting boards that's a different story. I definitely let those soak overnight. Hope this helps. Thanks for watching and subbing!

Beautiful charcuterie boards. Question, how thin are the boards? Or a better question, what minimum thickness do you recommend, or does that depend on the size of the board?

Well Done

@LTDWoodworks

3 жыл бұрын

Thank you!

The glob of hot glue on a warped board is great. The hot glue will spread out and fill whatever space it needs too when you push down on it before it cools to a hard blob.

@LTDWoodworks

2 жыл бұрын

Yep, definitely a great trick to use around the shop👍

Great work. Just curious what kind of defects prevented the other cut outs from being used

@LTDWoodworks

3 жыл бұрын

Thank you! Ya, they're still sitting around my shop somewhere waiting to be used for something. From memory one had a very large "void" around an inch by three inches. I couldn't see a way at the time to cut it out of the board to make a nice shape. The other one has lots of bug holes plus a crack running down almost the full length of the board. I could still maybe use that one by filling the cracks and bug holes with the black CA glue. I just didn't want to spend the time fixing it at that time. Thanks again!

Great video and the boards are beautiful. Do you ever run into any issues with the finished boards starting to twist or cup?

@LTDWoodworks

2 жыл бұрын

Thank you. No. At least not that I’m aware of. I only use wood that has been properly dried. Doing so should ensure that the wood will not move after you’re done. Thanks again!👍

Stumbled across your page the content was very detailed & will enjoy going through your previous content! I have 1 question though, do have a particular thickness you like to use in making these boards? Thank you in advance from California.

@LTDWoodworks

2 жыл бұрын

Yep, I typically stay around 1/2 to 3/4”. My opinion is that’s just a good thickness. However, I know a guy on Instagram that sells most of his around 1” thick. So I guess it’s just a matter of opinion. Thanks for watching!

What material did you use to fill the voids?

Hello. Great video. Thanks so much for sharing your knowledge. Where did you get your branding iron?

@LTDWoodworks

Жыл бұрын

Got it from Budget Branding Irons. Great quality at a great price 👍 Thanks for watching 👍

Very nicely done on this video, as well as the wood working. You did a great job on all these. Thank you for taking the time to make this video and share your process with us. Thank you sir, PS new sub here. Keep up the great work looking forward to seeing more from your channel. Dale PS, favorited your shop as well, you will know its me, same logo as on this comment. Thanks again, and good luck with your future sales. Dale

@LTDWoodworks

3 жыл бұрын

Glad you enjoyed it and thanks on both accounts!

Amazing work, brother. Nice work. Subbed FO SHO! Cheers!

@LTDWoodworks

3 жыл бұрын

Much appreciated!

Looks damn good buddy !!

@LTDWoodworks

Жыл бұрын

Thank you!

I really enjoyed your video. What should the moisture content be before making the charcuterie boards?

@LTDWoodworks

2 жыл бұрын

Mine are usually around 8 to 10%. Course this my very depending on the time of year and location. Dryer climates versus wetter,etc. Thanks for watching!👍

These turned out beautiful!! Just wondering what kind of mineral oil do you use to let the boards soak?

@LTDWoodworks

3 жыл бұрын

Thank you! There's a link in the description for the oil I use. Basically it's just a gallon size of food grade mineral oil. I think I started off with 3 gallons in that container and it's lasted quite a while for me with the small amount of boards I make. Thanks for watching!

These are 👍

@LTDWoodworks

Жыл бұрын

Thank you 👍

Where did you purchase your branding iron?

Nice

@LTDWoodworks

2 жыл бұрын

Thank you 👍

Your the first I’ve seen use 600 grit. I was recently given 1800 600 grit 6” orbital discs. Wasn’t sure what to do with them. Anybody need any? Great video and gorgeous boards.

@LTDWoodworks

3 жыл бұрын

Ya, I use that grit because it comes in as part of a bulk order when I order sandpaper. So since I have it I figure I'll use it. Is it absolutely necessary? Probably not. But I do like giving the boards that little something extra. Thanks for the comments and thanks for watching!

holy cow. you had me at the hot glue planer tip...

@LTDWoodworks

2 жыл бұрын

Ya man, easy and it works great!👍

Very nice, where can i get a branding iron that's a nice touch thewoodworkingquad

@LTDWoodworks

Жыл бұрын

Thank you 👍 I got mine from Budget Branding Irons. Very nice quality 👍

Hi, very nice boards. Where did you get your branding iron? I didn't see it in your list of products. I think that makes a great addition to the board as well as continued advertising.

@LTDWoodworks

Жыл бұрын

Got mine from Budget Branding Irons. Great quality at a good price. I actually need to get another smaller one. Sometimes my current one is just too big. Thanks for watching!👍

I say...u go to town a lot....must be nice.. PS excellent work.

@LTDWoodworks

3 жыл бұрын

Thank you!

They are beautiful! What do you typically charge for these?

@LTDWoodworks

3 жыл бұрын

Check out the link in the description that will get you to my Etsy store. Two of these boards are currently up for sale on there. The small rectangle board in this video sold before it was even done for $45.00usd.

Any thoughts on being able to make them out of either Ash or Hickory? I know that those are 2 very dense hardwoods. Sure appreciate your time and thanks so much for this video! 🙂

@LTDWoodworks

Жыл бұрын

I would say as long as they are hardwoods your good to go! You're welcome and thanks for watching!

Nice work Sir. Subbed

@LTDWoodworks

3 жыл бұрын

Thank you!

Love how these turned out brother! That big one is a work of art for sure 🙌🏻

@LTDWoodworks

3 жыл бұрын

Thank you! Ya, I really like how these came out as well! Even the smaller one with a handle I like because it looks like a wood hand saw😊

Would olive wood be good to use? And which cut would be strongest/nicest. Disks, length or diagonal? Latter ones for more oval shapes. Thanks for any answers.

@LTDWoodworks

2 жыл бұрын

I actually just saw an Olive wood board for sale on line today. And it was beautiful 👍 So yes, I’d say it’s a good wood. In my opinion these boards don’t need to be strong. They’re usually just holding some food. So I would say any of those cuts would be just fine. Let your imagination go wild👍

@henriwolbrink

2 жыл бұрын

@@LTDWoodworks Thanks for your quick reply. I plan to prepare for the next BBQ season. As this was the second one without work due to all COVID19 restrictions here in Spain. But my wood supplier can also get hold of a lot of olive trunks. And I would really like to make a serving board for my products. Including whole piglets or sheep. Search for #puraleña BBQ-XXL and you'll see my 'hobby'. Just love to see happy people.

What do you sell boars like this for I always have problems pricing my project for sell? Beautiful boards great job!

@LTDWoodworks

3 жыл бұрын

I do a lot of research on what they are selling for mainly on Etsy. Yes, some people sell them for way too cheap so I go for the higher end of the price scale. The right people will pay more so I wait for them. If I remember right I think the biggest one sold for around $100usd. The smaller one I sold to a coworker for $40usd. Thanks for watching and commenting!👍

Beautiful boards!! Do you ever have an issue with them cupping? If not is there anything you do in your process to prevent it? Thanks for posting your content

@LTDWoodworks

3 жыл бұрын

So far, no. At least no customers have told me so. And one board I gave my mom a year ago is still doing just fine. The important thing is to use dry wood. If you use wood that is still “wet” and make a finished board with it, it will warp or cup on you as it dries. A lot of the walnut I’ve been using has been dried for years and is in the “upstairs” portion of my shop staying dry up there. I’m running out of that supply so I’ve started buying either kiln dried wood to use right away or new “wet” wood that will be stored until dry. Hope this helps and thanks for watching!

@dalepaull8905

3 жыл бұрын

@@LTDWoodworks Thanks for the reply and keep up the fantastic work!

@LTDWoodworks

3 жыл бұрын

Will do, thanks!

is it safe to leave the live edge on the sides somewhat rough or does it need the fine sanding and oil then wax on it?

@LTDWoodworks

Жыл бұрын

I’d say that’s a matter of opinion question. Some may like the rough look and others may like it smooth. My preference is to have it smooth. Also, having the oil and wax on all surfaces helps to protect the wood. Hope that helps. Thanks for watching!

hope you dont mind another question - Im looking for a branding iron - where did you order yours from Burt

@LTDWoodworks

3 жыл бұрын

No worries, ask away👍 I got it from Budget Branding Irons. Great quality. I actually plan on getting another smaller one👍

Did you round over all the edges (including the sides where bark was removed with the draw knife) with the router on the largest board? Or just the edges that were cut with the bandsaw and the inside of the handle hole?

@LTDWoodworks

2 жыл бұрын

I only use the router on the regular edges that were cut with the bandsaw. The edges where the bark was I round over by hand with a power sander first and then with sanding sponges. Finally just holding fine grit paper in my hand. LOTS of sanding but worth it!😊

@mattsnyder7311

2 жыл бұрын

@@LTDWoodworks Greatly appreciate the reply and the info...Great content man!

Stunning work! Did you say walrus wax?

@LTDWoodworks

3 жыл бұрын

Thank you! Yes, it’s Walrus Oil wood wax. There’s a link in the description if you want to get some👍

Who here April 2023 good job 5 stars.

@LTDWoodworks

Жыл бұрын

Thanks for watching 👍

Do you try to keep the thickness around 3/4” to 1”? What do think is the perfect thickness of a Charcuterie board? Thanks for the video

@LTDWoodworks

2 жыл бұрын

I personally have a range of no less then a half inch. Typically though they are around 5/8" to 3/4". However, I watch a guy on Instagram who sells lots at around 1". So I think it's really just personal preference.

Where would you recommend getting wood for this project?

@LTDWoodworks

Жыл бұрын

I always check local sawmills. I have one nearby me that I use quite often. Much better prices but sometimes have to buy fresh wood and wait for it to dry. Or other times I may buy kiln dried wood. Hope that helps. Thanks for watching 👍

Greetings, excellent work. What would be the approximate cost for each foot of a picador like that?

@jorgevolky8257

3 жыл бұрын

I already saw it in the video description, thank you very much.

@LTDWoodworks

3 жыл бұрын

Ok, glad you found the info you needed because at this time I'm not sure what you were asking about🤔 Anyway, Thank you and thanks for watching!

Where did you get your branding iron?

@LTDWoodworks

3 жыл бұрын

I got it from Budget Branding Irons. Great quality 👍 I’m actually going to order another one that will be smaller. I figure that on some of these smaller boards the current one is just a bit big. Thanks for watching 👍

Hey, LTD, thanks for making this video. What you called "warped" and required a shim to be glued on is actually "twist." I like your technique of make a loop handle rather than just a hole for hanging. Your using the grain for the shape of the board is an especially good technique.

@LTDWoodworks

3 жыл бұрын

Thank you. Yes, I sometimes just use the term warped as a general term for when wood has changed shape of any kind. Not saying I'm correct, just what I do. Thanks again.

where did you get the branding iron?

@LTDWoodworks

2 жыл бұрын

Budget Branding Irons. Great quality and a good price so be sure to look them up👍

Where did you get your logo brander

@LTDWoodworks

2 жыл бұрын

Budget Branding Irons. Check them out, great quality!👍

Who makes your branding iron

@LTDWoodworks

2 жыл бұрын

Budget Branding Irons. Great quality and price👍

Do you save and reuse the mineral oil?

@LTDWoodworks

Жыл бұрын

Sure do. I keep several gallons in a plastic storage container.

Man I would kill for a slab like that

@LTDWoodworks

2 жыл бұрын

Do you have local sawmills near you with walnut? That’s where I get mine.

what size branding iron is that?

@LTDWoodworks

Жыл бұрын

If I remember correctly (out of town right now), it’s 1 1/2”. I do eventually want a smaller one though as at times the current one is too big.