Never opened a notification so quickly... Thank you Pablo!

Thank you so much! Excellent video. You are very kind and a treasure to all beginning luthiers.

Seu trabalho é extraordinário! Parabéns.

Thanks Pablo. Another great video!

Thank you, Mr. Requena, for explaining the concepts of purflings and bindings so clearly. This is much appreciated. I am in the process of building my first classical guitar, and have not found such a clear explanation as yours! Regards.

@redkitekk

3 жыл бұрын

I am very pleased you found this video helpful. Just in case you are interested I have a complete course available on www.onlineguitarmakingcourse.com

Thank You Sir Pablo, great video.

Wonderful video. Thank you!

Gracias Pablo!

Thank you x

Thank you .

¡Gracias!

thank you

Thx for the great information, about the black veneer its stain black ? 🙂thx

Again a very interessant and helpful Video. Very good idea to operate with one routed channel only. One question about the guitar you have shown as example: You have made the body of pao ferro. I think it must be the same wood as so called Santos or Santos Rosewood/Santos Palisander. I have read and experienced myself that this wood ist very toxic and causes troubles for the skin an the respiatory tract. Didn´t you have any problems of this kind or how did you protect yourself?

Interesting that you make your purflings the same height as the bindings (plus side purflings) so when you cut your slots it’s just one rectangular slot rather than a separate shelf for the smaller purflings as is done on steelstring guitars. Thanks

Hey Pablo, what kind of glue do you recommend to avoid delamination while bending? Thanks for the amazing content!

@redkitekk

4 жыл бұрын

Thales Barros i use Titebond original, it works well for me, but you are right about the amount of heat, you need to be careful not to overheat the strips. I also use a bending jig, that way if the glue starts to soften a little it isn’t a big problem as when the jig cools down all the strips remain in place and they don’t fall apart.

@thalesbarros151

4 жыл бұрын

PabloRequena thanks for the quick answer!

@18roselover

3 жыл бұрын

Titebond 3 seems to resist heat, and so does Gorilla clear poly glue, non foaming

Is it enough for start to have only one working bench and if it Is, what dimensions should be? Thanks Pablo

Thank you so much Pablo! May I ask you what type of glue you use in order to glue the different veneers? I have tried with Titebond 1 and 3 but every time I bend them (either using a bending iron or a bending machine), all the veneers got unglued and everything was really messy. I read that using polyurethane glue is better for bending bindings like this. What do you think about it? Thank you in advance for your availability!

Hi Pablo, is that the blue veneers that are sold by Madinter ? Years ago I bought blue veneers from Maderas Barber and it’s not the same blue, more like a dark royal blue. I like the one you show in this video.

Sir, I m very interested to make my own guitar, but I don't know how to start with work and Sir can you explain me which tools need to making the guitar at home in the beginning and how to make purfline at home and how to install truss rod in acoustic guitar please reply me

Me gustaría que hiciera videos en español, haber si se anima

So with a biding of 2.5mm and a purfling of 2mm your total one rebate route is 4.5mm x5mm. It does seem a bit aggressive and I assume totally goes through the sides. I will search for what you do for the inside for kerfing

@redkitekk

3 жыл бұрын

I know it might seem a bit too much to cut only one big rebate to house both binding and purfling but it makes the job a lot easier and the internal kerning blocks are big enough to cope. Just in case you are interested I have a complete course on www.onlineguitarmakingcourse.com

Pablo Hi I am interested in the course can it be purchased with PayPal Kind Regards Andrew

Hello Pablo, could you please translate bindings and purflings into Spanish, and do you know if it is the same in other Spanish speaking countries? Thanks, Dennis

@andreashaselhoff2445

4 жыл бұрын

Ribetes, filetes I think

@valentinkovshik

3 жыл бұрын

On the Madinter website, they are called Cenefas (binding) and Filetes (purfling)

@dennisboyce813

3 жыл бұрын

@@valentinkovshik Thanks for the reply...

I’ve just looked at the bookings for your course and you have only one place remaining for this year. So next year then.

Discúlpame Pablo pero porque no explicas en español o activas el traductor

@redkitekk

4 жыл бұрын

Giuseppe Bonaiuto que yo sepa KZread no traduce, solo te permite poner subtítulos, si estoy equivocado por favor corrígeme. Y respecto a porque no hago los vídeos en español es por que casi todos mis alumnos son de habla inglesa y estos vídeos los he estado haciendo como aclaraciones y apoyo a mis alumnos. Muchas personas que no son alumnos míos también se han podido beneficiar de los vídeos que hago y me alegro mucho, pero como te puedes imaginar hacer estos vídeos me lleva tiempo y no puedo hacerlos también en español. Lamento no poder ayudar a todos, lo siento. Si tienes alguna pregunta concreta sobre algún aspecto de la construcción de guitarras, házmela e intentaré responderte.

@giuseppebonaiuto5314

4 жыл бұрын

PabloRequena gracias Pablo he seguido tus vídeos y otros más y están a la altura un abrazo no Oda nada y gracias por responderme se ve que estás pendiente eso es bueno

Sometimes when he says thick he means height

Dont respond to the Cora message. Its a hack thing going on