How to Make and Use Wadding - A Useful Pottery Material
Тәжірибелік нұсқаулар және стиль
Wadding is the topic of this video. How I mix it, how I use it and how I remove it from fired pots. It's an exceedingly useful material, if you're wood-firing, salt firing or just using a gas or electric kiln. I hope this films answers the many questions I'm often asked about the stuff.
Here's my how to tidy pots up post firing video: • How I Finish the Bases...
Wadding recipe: 50% china clay, 50% coarse alumina hydrate, mix powders and then add water very slowly as the mixture tends to turn too watery very easily. So better to take it slow. Once it has a clay like consistency you can wedge it up and store it in an air tight container.
📖 • PRE-ORDER MY BOOK: ow.ly/9wYn50MQXV5
📢 • Find out much more about my work here: linktr.ee/floriangadsby
Timecodes:
0:00 - Introduction
0:09 - WADDING!
0:30 - How I mix it up.
3:25 - How I use wadding for lidded jars
6:55 - How I use wadding for mugs
7:20 - Talking about wadding use during my apprenticeship
8:53 - Using wadding to stabilise a kiln shelf
9:08 - Using wadding for propping up pyrometric cones
10:28 - Removing waddings from the jars
11:21 - Grinding clean the lid of the jar and the base of a mug
12:16 - Wadding glaze catches
•
Get in touch here: www.floriangadsby.com/contact
Sign up to my newsletter here: www.floriangadsby.com/newsletter
Website - www.floriangadsby.com
Пікірлер: 71
I cannot stress how much gratitude I have for you sharing so much of your process. So much of the arts is gatekept because teaching seems to be the biggest moneymaker in lieu of machinery, tech, and ai replacing human craftsmanship. Thank you so much for continuing to create and share with us ~
This video came at the prefect time, just finished bisquing some jars for my end of term exhibition. Thank you for giving such a detailed explanation! Thank you ❤
super helpful, i found a wood kiln near me so i gotta learn all about it before i do my first firing!
@Alex_0Z
Жыл бұрын
also happy easter
Beautiful! Thank you for sharing your knowledge to us. The pottery shop where I took a beginners class is a huge fan. It was fun to hear that my mentors also enjoy your content and are deeply inspired by your works.
this is an incredible video. Not many people actually ever talk about wadding.
Thank you so much, love to hear your voice, so I can watch and listen to your video`s over and over again, so I learn so much from you, 🙏🏻🙏🏻 🇧🇪
Wonderful demonstration! Thank you so much Florian Gadsby! All the best!😊💕
Thank you for this! I've been wondering about making the cone shaped stilts out of wadding. I may give it a try. Your videos are immensely helpful and I appreciate your generosity!
I didn’t even know they used anything. I really could have used for one of my bowls. The glaze was very runny when fired and my bowl had to pride free. The of course was damaged. Thank you for more knowledge.❤
Perfect timing - I was going to look for a wading recipe as I have an idea that it might help solve a problem piece I want to crystalline glaze - it has a very odd foot and I really can't make a "normal" riser - I'm excited to try it in this weeks firing.
Thank you sooo much for this wonderful tutorial on how to make wadding. 🎉
Thankful for all you informative videos!! Thanks in advance ❤
Thank you Florian, that was very informative and entertaining. Happy Easter
Excellent tutorial. Thank you.
Happy Easter Florian.
Awesome video! So much time to make a single item. No wonder they cost a lot more compared to the factory production stuff...
Thanks for sharing!
Thanks a lot, very informative
Bless you for this! I always wondered ?!?!how?!?! Thank you!!
Thanks, Florian. 😁
This video is perfect
Thank you!
Thanks You I am learning !!
Wonderfully helpful video. I hope your hand is okay, that’s a pretty gnarly gash
@floriangadsby
Жыл бұрын
Thank you. It’s alright, very annoying, but only surface level. I was pouring a bucket of glaze with a bad grip and it slipped, and the sharp underside of the plastic rim ripped a lot of skin off - silly mistake as I knew I had a poor hold on it but continued anyway… almost totally healed now.
Zircopax is a good substitute for alumina if for some reason it's not available, or whichever one happens to be cheaper.
If you add a drop of dish soap to your water it will wet the clay better for the same hydration. Might make the hydrating process less fiddly.
NICE
it never ceases to amaze me how much pie crust and pottery have in common.!
@jaggederest
Жыл бұрын
I'm a hobby potter, and a former professional baker, I got back into baking bread this year and it was hilarious how much kneading dough and wedging clay are the same motion, fell right into the rhythm again after ~20 years of no serious baking practice.
I have been looking for a long handled scoop like you are using. Can I ask where you got it from? Thanks for another great video
Yes! I was going to ask this question after watching some of your other videos. What is it? How does it not stick etc? I tried Googling but the answers weren’t helpful to my brain! Thank you for this.
@floriangadsby
Жыл бұрын
So please you found it useful! Thanks for taking the time to watch, Melanie.
Bonsoir , votre travail est magnifique et c est toujours un plaisir de regarder vos vidéos. Sauriez-vous me dire s il existe un équivalent en france de la brandon powder s il vous plait. Quel est ce produit ? Merci par avance.
Can you coat the wadding with graphite powder to prevent sticking?
Can you use wadding on a coarse bodied clay? I'm firing square edged plates on top of each other to save kiln space. I'm finding that the plates are fusing together during high fire. (They do come apart with a sharp tap, however I'm worried that I will damage them at some point) The clay body is very textured. I'm wondering if the wadding would stick to the coarse clay body?
Florian, could you speak to why you prefer wadding over stilts? I would love to hear your thoughts.
@floriangadsby
Жыл бұрын
Well, stilts aren’t quite so customisable and don’t work for lids in the same way. They’re great for some pieces if you’re firing in very controlled atmospheres, but I suppose the reason you don’t see them used in wood/salt/soda firings is that they aren’t typically strong enough, (the ones you buy already formed at least). The molten wood ash, of vapourised soda would destroy them after a firing or two, and they’re made from very fine materials, so they’d be tricky to grind away from the pots. So, waddings like this work better, but you can also make your own wadding stilts from wadding like I’ve mixed in this video, I’ve found that before.
Like always I learn stuff I didn't know before. I feel like for awhile there I was creating some unwanted glaze results by handling wadding and then touching my glazed pots without washing my hands in-between. Do you worry about this or have any trouble with it?
@floriangadsby
Жыл бұрын
I don’t worry too much! I always keep a wet sponge and a towel around when packing the kiln, and whenever my fingers get too dusty, or crusted with wadding, I wipe them off so I’m not constantly transferring prints. I tend to do all my wadding a few days before actually packing the kiln, that way all those pots are simply ready to go.
Thanks for this video. Can I use wadding in an electric kiln firing, cone 5-6?
@floriangadsby
Жыл бұрын
Of course! It works for all temperatures.
Do you think wadding could be molded and fired into kiln stilts? Also, what is the cone rating before decomposition/deformation?
@floriangadsby
Жыл бұрын
Of course! During my apprenticeship in Japan we made waddings stilts/setters that were quite chunky, to use under pots. They can be reused numerous times provided they don’t get too encrusted with glaze.
❤❤❤
Hey! Can you make a video on all the clay bodies you use?
@floriangadsby
Жыл бұрын
Sure! But there aren’t many. I tend to use one main stoneware, es80 at the moment, and a variety of porcelains, like Audrey Blackman.
Hi Florian! Do you add the iron into the stoneware clay you use yourself? Or do you buy the stoneware already with the iron mixed in? Thank you!
@floriangadsby
Жыл бұрын
Hey! I buy it with the iron already mixed into it. Sometimes I sprinkle ilmenite into the stoneware and throw small batches of more speckled work, but I don’t do it too much as it can be quite dramatic. Thanks for watching.
@luigilake
Жыл бұрын
Thank you for the reply! Would you know if it’s possible to achieve the same effect by mixing red iron oxide into my regular white stoneware clay body? I essentially want to test creating. Marbled stoneware, with a mix of regular white stoneware and that same stoneware with high iron content. Is it red iron oxide that gives your clay it’s red flashing?
Such a useful video - thank you. Quick question - can you use the test tile saucer things multiple times? Ie can this wadding be fired multiple times?
@floriangadsby
Жыл бұрын
Yes! I’ve used them dozens of times.
@David-uv7hz
Жыл бұрын
@@floriangadsby Great!!! Thanks for the reply - I'll definitely be creating those trays for glaze tests!
@David-uv7hz
Жыл бұрын
@@floriangadsby Sorry - quick second question... do you bisque fire the wadding trays before you use them with test tiles or straight from green state?
@floriangadsby
Жыл бұрын
@@David-uv7hz I fire them green, just don’t go too quickly.
@David-uv7hz
Жыл бұрын
@@floriangadsby Perfect! Thanks for your help - appreciated.
I just fire with my lid straight on the pot. No glaze in between them of course. Why do you find the wadding necessary over firing the lid directly on the pot?
have you ever tried to make anything out of wadding? like a bowl or mug?
@floriangadsby
Жыл бұрын
I haven’t! But a little wadding bowl might be nice. It’s a bit rough but it flashes nicely, like singed on toast.
I was told that Chinese or Japanese potter sometime add ash or flour/starch into their wadding recipe.
@floriangadsby
Жыл бұрын
Rat poison too, if they get eaten off the pots.
@reececyeh4636
Жыл бұрын
Kind of make sense, because cat is kind of "no no" in these kind of workspace.
If you are not glazing the rim of the pot and the inside of the lid, why are you adding wadding?
@floriangadsby
11 ай бұрын
The iron rich clay, fired in reduction, will stick to itself when left unglazed.
@karengrahamstudios
11 ай бұрын
@@floriangadsby Got it. I typically fire oxidation but about to start reduction, so good to know!!
Oh no what happened to the back of your hand??
@floriangadsby
Жыл бұрын
Just a wee gash caused by a big glaze bucket - it had almost healed now!
I hope your hand is okay :(
You talk too much