How to Make an Iceman Ice Effect, DIY Marvel Legends Accessory

Ойын-сауық

How to Make an Iceman Ice Effect, DIY Marvel Legends Accessory
Today we’re going to make an ice effect for Marvel Legends Iceman, who is a bit of a boring figure to me because he didn’t come with any accessories or interchangeable parts.
The materials you’ll need for this project are:
Low temperature glue gun
-Glue sticks. I use all purpose sticks so I can use them in both my regular and low temperature glue guns: amzn.to/2p5ySVI (Amazon affiliate link)
Ruler: amzn.to/2kPHexg (Amazon affiliate link)
Pencil
Disposable fork, such as the ones from fast food restaurants
-Parchment Paper: amzn.to/2qk056v (Amazon affiliate link)
Please note, that parchment paper and wax paper are two completely different materials. If you use wax paper on this project, you’re going to fail.
Then some optional materials are painting supplies and acrylic craft paint and gloss varnish. For the paint, I’ll be using apple barrel brand blue cotton.
We’re going to start off by rolling a small piece of parchment paper into a tight cone shape. Hold your cone and with your other hand mark off the edge of the cone about 5 cm from the small tip. That will give us an idea on where we need to apply the glue.
I recommend doing a ring all around the base of the cone with the hot glue and letting that dry a bit before moving on. That will help keep the flap of your parchment paper down. Then I just apply more lines of glue working my way towards my pencil line. When I approach the pencil line, I put down a decent size blob of glue and then use the tines of the plastic fork to drag the edges of the glue to fan it out. I work in a small section at a time because one of the drawbacks of low temperature glue guns is the glue sets much faster so you have much less time to work with it.
Make a second cone out of the parchment paper and mark of 4 cm from the tip. Wrap the paper around the first cone and keep it tight at the base. Then flare out the opposite end. Apply the hot glue using the exact same process as before.
Make a third cone by wrapping the paper around the second cone tightly at the tip and flare out the opposite end. Mark 3 cm from the tip and cover with glue as before.
Now you can glue your three cones together, but I like to keep them separate for more options. Mine fit tight enough that the friction holds them together, but if yours are looser you can stick them together with a bit of poster mounting wall putty.
I think this effect looks the most like ice when it is unpainted, but Iceman is so blue it makes a stark contrast between the two. I’m going to apply a small bit of paint to the interior of my cones using the blue cotton shade. The paint will be thickest at the base and then I’m going to drag it towards the ends so that the paint will taper out and we’ll have a nice gradual transition. I want to leave the ends of my effect unpainted.
After I’ve painted, I’m going to seal everything with some glossy varnish.
After the sealant is dry, you can stick them to Iceman with a bit of poster wall putty or just jam the effect on one of his fingers. I’ve used both methods in my photos, but you have to be fast to take a picture with the poster putty method.
Share Your Photos
Also, If you’ve tried any of my projects, I’d love to see your photos too! Just send me a link to your photos or send them to me on a social networking site. Just make sure to say I have your permission to share your photos and what name you’d like me to use to give you credit for your work.
Music: KZread Free Music Cryptic Sorrow - Atlantean Twilight by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Zubbie’s Social Media Info:
Facebook: / zubbiecreations
Instagram: / zubbiecreations
Twitter: / zubbiecreations
Tumblr: / zubbiecreations

Пікірлер: 206

  • @ProfNight
    @ProfNight7 жыл бұрын

    Cap‘s shield, Ghost river's chain, and the capes . Now the ice blast, I love your channel!

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks! Glad to hear you're enjoying my videos :-)

  • @thebenmidthun
    @thebenmidthun Жыл бұрын

    exactly what i was looking for. glad i have all of these supplies at home already. Thank you so much!!!!

  • @user-ei7bo1gg6s
    @user-ei7bo1gg6s5 жыл бұрын

    I stapled straight through my thumb. Lolol. You're not alone.

  • @gamerla-jiah1388

    @gamerla-jiah1388

    5 жыл бұрын

    Sean Shotwell hey 2019

  • @MattMinotas
    @MattMinotas7 жыл бұрын

    This is exactly what I wanted, really appreciate you made this, it looks awesome!

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Glad to hear this is what you had in mind!

  • @shroomgod1990
    @shroomgod19902 жыл бұрын

    This is great. I have a diamond select IceMan statue, and being clumsy as I am I broke all of his fingers off. Granted It is an extremely fragile piece. But after reviewing this I believe I can salvage it and make him a displayable piece once again. Thank you for this content, it’s a great idea for effects or in my case a necessary fix.

  • @CapitalCH
    @CapitalCH3 жыл бұрын

    wow that's really cool. wouldn't have even thought of that

  • @fabiospsantana
    @fabiospsantana6 жыл бұрын

    I'm brazilian and it's the first time I watch a video about how to do effects for action figures. My english level is not good and I'm in the beginning of this video, but loving your voice and the way you explain everything. For sure I'm going to try it later, and my first projet will be a Cyclops' Optic Blast. Thank you so much for sharing your knowledge!

  • @Zubbie

    @Zubbie

    6 жыл бұрын

    Good luck with your projects! 🙂

  • @fabiospsantana

    @fabiospsantana

    6 жыл бұрын

    Thanx

  • @abeeshek123
    @abeeshek1237 жыл бұрын

    this is absolutely brilliant work Zubbie, it matches so well with this figure !!! loved it !!! and thank U sooo much featuring my Dr. Strange :)

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Your Doctor Strange was a joy to share. You always take such amazing photos!

  • @tayo2992
    @tayo29927 жыл бұрын

    Definitely trying this out real soon great work

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Share some pics when you're done. :-D

  • @Zubbie
    @Zubbie7 жыл бұрын

    I’ve had requests for other ice related effects including: 1. Ice Slide: I really want one of these myself, and I’ve been working on a design. If it works and looks halfway decent, I’ll be sure to share. 2. Ice Weapons: I’ve had a couple of requests for weapons Iceman has created out of ice, but I’m having trouble tracking down comic panels showing Iceman using weapons to help me as reference art, so if this is something you’d like to see, I'll need links or specific comic info so I can look up the artwork.

  • @kicobian

    @kicobian

    7 жыл бұрын

    Zubbie go for it :D

  • @Tshujaat

    @Tshujaat

    7 жыл бұрын

    Zubbie I would say that if you need inspiration for ice weapons I would check out the young justice cartoon or any other superhero cartoon show with an ice-man type character since they can sometimes get creative with those powers

  • @JULIDINHO

    @JULIDINHO

    7 жыл бұрын

    Zubbie make clothes for the peter Parker marvel legends so we can make him the civilian form instead of just unmasked

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Taha Shujaat That's an idea, but I'd rather find some comic artwork to start from. You would not believe the rants I had to deal with from people on my Ghost Rider Chain video about how I "obviously" don't read comics and how Johnny Blaze doesn't use a chain even though that video has several panels I pulled directly from comics showing modern Johnny swinging a chain around. A few people were nice about their opinions, but some were so mean I just deleted them before I finished reading. So I want to minimize the chance of having to deal with that again by finding some Marvel comics ice weapon source material to start with.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Rago14 I've been thinking about that, but do you have any ideas on what to do about his hands so it doesn't look like he's wearing spider gloves in his civilian outfit? I need to learn how to make hands.

  • @hydro8111
    @hydro81117 жыл бұрын

    Thank you so much I would love to do this with my toybiz iceman figure!

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Glad to hear this was helpful! :-D

  • @hipzilla702
    @hipzilla7027 жыл бұрын

    Love your Ice Blasts and jokes! You could look to other ice powered heroes and villains (Killer Frost and Subzero) for inspirations.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks!

  • @sarahgray9475
    @sarahgray94755 жыл бұрын

    i would really like to put some ice looking effects on my action figure weapons like swords and axes

  • @MarvelandDC379
    @MarvelandDC3797 жыл бұрын

    I find it funny that Hasbro gives us accessories for characters who don't need it like the Abomination wave Cap with the shield throwing effect. While they don't give us effect accessories for characters who do need it. Hasbro's doing a great job with their figures for effect accessories. But if they don't have any for characters who need them, I can always count on you Zub!

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Agreed. I really don't get the logic of how Hasbro decides who comes with accessories. Iceman and especially Blizzard are pretty bare bones figures.

  • @cbowen6483
    @cbowen64833 жыл бұрын

    im using this for a Sub-Zero figure that doesn't have any ice effects. thanks for the help!

  • @zalaathrun20
    @zalaathrun207 жыл бұрын

    Omega level Mutans: (According to X-men Wikia page) Jean Grey.X-Man.Iceman.Hope Summers.David Haller (Earth-616)Franklin Richards.Vulcan.Elixir.

  • @el_bman98
    @el_bman987 жыл бұрын

    Hey my custom Dr.S makes his appearance thanks Zubbie cant wait to try this on 3.75 inch iceman ... what a way to start 2017 great video ! 👍

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks again for allowing me to share your photo! I'm looking forward to seeing what you can do with this effect on 3.75 inch scale. Lots of respect for you being able to shrink these projects down even further!

  • @riptidepictures8105
    @riptidepictures81057 жыл бұрын

    I might use this method to make a web blast effect

  • @donyflip8621
    @donyflip86217 жыл бұрын

    i havent seen the video but i cant wait to see it! and i saw your tutorials on how to make the posable cape, bow, arrow and quiver, and they are just awesome! i am going to put a link to your channel on my next stop motion! because i you have lots of potencial! ahah 😂 by the way i know that i've already asked you this...but please can you make a tutorial on how to make various spider man web effects? all posable with a wire to support all them in shape? like if he was grabbing some villan and the web is rapped around the bad guy body. you know? i would realy appreciat it keep the good work! :D

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    I'm happy to hear you're enjoying my tutorials! I'm not sure if you've seen it, but my second Christmas video with Spider-Man 2099 also has a web line garland that I've used before to wrap around action figures before. It's made out of cloth wrapped stem wire so you can pose it in may ways. That video is here: kzread.info/dash/bejne/jJWXrZSOZKenZs4.html

  • @donyflip8621

    @donyflip8621

    7 жыл бұрын

    Zubbie actualy i havent, i have been a little busy i'll check it out when i've got the time thanks for the link ahah

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    You're welcome! Hope it helps inspire some ideas for your stop motion videos.

  • @donyflip8621

    @donyflip8621

    7 жыл бұрын

    Zubbie ahah it will, thanks again :)

  • @donyflip8621

    @donyflip8621

    7 жыл бұрын

    Zubbie i just saw the vídeo it is a really good idea but it wasent what i was looking for, i was lokking for a venom tendril kindda web, but anyways i can use that idea for other stuffs or maybe i will even change my mind and use it for spider man web ahah really love your videos!

  • @Maverick-qz9oi
    @Maverick-qz9oi7 жыл бұрын

    I can never get any of the crafts to look like yours.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    I'll let you in on a secret. It takes me multiple attempts to get my crafts to look halfway decent, so don't give up and keep trying and it will get easier. :-)

  • @TheInfinityLion
    @TheInfinityLion3 жыл бұрын

    Love this Snow Cone do it yourself lol

  • @riptidepictures8105
    @riptidepictures81057 жыл бұрын

    Maybe give your Ice-Man a matte white dry brush effect, so it kinda looks like frost and less like he's a blue Ice Pop

  • @thebagonline2113
    @thebagonline21136 жыл бұрын

    Awesome video, any tips for some Sandman effects?

  • @kuldipbinning1989
    @kuldipbinning19897 жыл бұрын

    Another great design, any ideas on the ice slide? I remember Loki was involved with the increase in Ice Mans power level.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Oh, that Ice slide has been giving me problems. lol I'm taking a break from it and will try it again later.

  • @legendaryheroes1814
    @legendaryheroes18145 жыл бұрын

    Thanks for the video.i waz able to make a effects for my scarlet witch.i have a video of it on my channel.thanks

  • @jayfigures6450
    @jayfigures64507 жыл бұрын

    Thanks could you possibly send me a list and are you many able to make a tutorial for sue storms force fields Really excited for the new Hasbro one

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    I think a force field for Sue is a great idea. I'm excited about the new Hasbro one too! As for a list of diorama makers or customizes, here on youtube there is: Al Figures (dios): kzread.info/dron/A35YRp23SBDlNQWhUcehUg.html Craig Warrack (customs): kzread.info/dron/IeAwP19dYeeofAGs6zyt5Q.html Anthony's Customs: kzread.info plus many others that I'm probably forgetting.

  • @mrrictus
    @mrrictus7 жыл бұрын

    I have heard the background music played in so many creepypastas . I was half expecting a sudden jump scare lol

  • @vladcoae3776

    @vladcoae3776

    7 жыл бұрын

    Swoldier_ Boi it was scary but i did not know its from creapy pasta

  • @blackcondor208
    @blackcondor2087 жыл бұрын

    I've definitely stapled my finger. And I've even been shot with a staple gun. Ahhh, childhood. Also I think Iceman was always omega level, but no one really knew that until Emma Frost stole his body or whatever for a stint in the 90s and showed everyone how insane his powers could get. I don't think he always had great control over them. The effect turned out great, and your jokes just keep getting better. V. enjoyable video.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks for sharing the Iceman info! Staple gun? Now that would hurt! You have no idea how relieved I am to hear I'm not the only one who stapled my finger as a kid. I wanted a stapler of my own so bad, and when I finally got it, I hurt myself. haha

  • @blackcondor208

    @blackcondor208

    7 жыл бұрын

    haha! I definitely did it as a kid a fair bit. even stapling my paper bag lunch. I definitely did it at an office job I had a few years ago, too. I was rightfully laughed at by all of my colleagues in the marketing department.

  • @mrrictus
    @mrrictus7 жыл бұрын

    Awesome tutorial !

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks!

  • @toyszone7749
    @toyszone77496 жыл бұрын

    Hey can u do a iceman diorama like he is sliding

  • @TheInfinityLion
    @TheInfinityLion3 жыл бұрын

    What about something like an ice axe or a big fist. Something similar to a Sandman effect ?

  • @vgamer11
    @vgamer114 жыл бұрын

    I'm really glad we got a more clear iceman in Marvel Legends; now we don't have to paint these blue!

  • @MarvelStopMotionStudios
    @MarvelStopMotionStudios7 жыл бұрын

    Amazing

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thank you!

  • @jenniferdavis6774
    @jenniferdavis67745 жыл бұрын

    I have stapled my finger. Also I find that a good ice blast for the marvel legends Iceman is to take a base from a young justice aqualad figure that has water spewing out from a tank so I cut the tank part of it off so now I have a pretty decent looking ice blast.

  • @WanZerReVieW
    @WanZerReVieW7 жыл бұрын

    This would work well for shocker as well you could call it an air affect.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Good idea. Shocker deserves something more fitting to his powers than the reused Havok effect

  • @jayfigures6450
    @jayfigures64507 жыл бұрын

    Do you know any duo makers or really good customisers

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    I don't know anyone personally, but there's a few I follow on KZread and Instagram. Are you looking for someone that takes commissions or are you wanting to check out their work?

  • @BooyakashawCreationz
    @BooyakashawCreationz7 жыл бұрын

    Awesome! When you open the Silk figure, could you do maybe some finger web effects since she doesn't shoot webs from her wrist and sadly she only has 1 open hand. But she's still a good figure. Just a lil heads up YT buddy! :D

  • @BooyakashawCreationz

    @BooyakashawCreationz

    7 жыл бұрын

    Btw, I've stapled my fingers before too lol

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    My youtubing buddy is in the staple club! Members: 3 now. lmao I'm getting annoyed with the Spider ladies not getting interchangeable hands. :-/ I'll give the Silk web effects some thought. Not sure how to do that.

  • @vishalm1022
    @vishalm10227 жыл бұрын

    Yet again a great video

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thank you :-)

  • @loveordie4
    @loveordie46 ай бұрын

    Thats awesome

  • @zachbahamutson5477
    @zachbahamutson54774 жыл бұрын

    I think that he's is an Omega Level mutant but so is storm in several other mutants on the X-Men team.

  • @Deadpool-uv9mu
    @Deadpool-uv9mu7 жыл бұрын

    Miss u zubbie awesome video!!!

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks!

  • @floogon_gameing6987
    @floogon_gameing69875 жыл бұрын

    Possible names for this effect: Cone of Cold(d&d attack), Freeze Flare, Freeze Flash, Ice Burst, and Shotgun Ice (from megaman x)

  • @thejmeister
    @thejmeister4 жыл бұрын

    The music is so tragic! I once stapled both my thumbs together trying to close stapler after refilling the staples.

  • @bewilderbeastie8899
    @bewilderbeastie88997 жыл бұрын

    I'm going to make these for my Ice-type Pokémon!

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    That's a good idea. :-)

  • @richardthehutt4407
    @richardthehutt44076 жыл бұрын

    Snow Cone effect?

  • @jeffreytorres3268
    @jeffreytorres32687 жыл бұрын

    I think ice blast sounds like a good name :-)

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Much better than Ice Spray. xD

  • @jeffreytorres3268

    @jeffreytorres3268

    7 жыл бұрын

    Zubbie oh my.. lol 😂

  • @hensolo10
    @hensolo106 жыл бұрын

    Thor Spinning hammer effect similar to version of Disney store exclusive Thor would be cool project

  • @Zubbie

    @Zubbie

    6 жыл бұрын

    I like that idea!

  • @ihatera1691
    @ihatera16917 жыл бұрын

    Can u make a speed blur for speed demon

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    I like that idea! Not sure how to do it, but I'll keep that in mind :-)

  • @ernestosoto6700
    @ernestosoto67003 жыл бұрын

    I would like to share My own Ice effects for My Retro Iceman

  • @brianrivera3978
    @brianrivera39784 жыл бұрын

    Really cool😎😎

  • @virtual9355
    @virtual93557 жыл бұрын

    Zubbie can u make weapons for venom?

  • @jjmacnevin529
    @jjmacnevin5297 жыл бұрын

    you are the best youtuber

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    💜

  • @godmagnus
    @godmagnus5 жыл бұрын

    Ice beam! Like in MvC2.

  • @prophet924
    @prophet9247 жыл бұрын

    Iceman is an energy manipulator. So he absorbs energy outside his body to then freeze his immediate environment. So he leaves the energy level alone for his insides...thus concludes my awkward heresay science lesson about fictional characters.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    I like your analysis. Makes sense to me!

  • @LegitStopmotions
    @LegitStopmotions7 жыл бұрын

    Cool

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks!

  • @LegitStopmotions

    @LegitStopmotions

    7 жыл бұрын

    Zubbie no problem. Lol this year im going to have to try some of your projects

  • @nerdyguysreviews6469
    @nerdyguysreviews64697 жыл бұрын

    Have you ever tried to make wings for any of your figures?

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    I've made replacement wings for ponies. What kind of wings do you have in mind? For Falcon Cap maybe?

  • @mutantkiller09
    @mutantkiller097 жыл бұрын

    nice effect zubbie 🔥🔥👍👍👍 and thanks for share my photo

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    You're welcome and thank you too for sharing your photo with me. I always enjoy seeing people making my projects. 💜

  • @thefiend7418
    @thefiend74183 жыл бұрын

    This works for subzero

  • @riseofloganxlogan4230
    @riseofloganxlogan42307 жыл бұрын

    funny i just got my iceman. But my iceman don't look that blue, it might be something with the lighting.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Interesting! You're probably right about the lighting though. I took some more photos of Iceman in front of a white background that I didn't use for this video and he looks even more blueish.

  • @gabrielmorenomartinez3137
    @gabrielmorenomartinez31377 жыл бұрын

    👌🏻👏🏻👏🏻👏🏻👍🏻

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    :-D

  • @thdr_lilz5672
    @thdr_lilz56726 жыл бұрын

    I use the wax paper to make a ice slide effect

  • @Zubbie

    @Zubbie

    6 жыл бұрын

    That's a good idea!

  • @danielrojas983
    @danielrojas9837 жыл бұрын

    zubbie can you de some stands

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Flight stands, or regular...umm...standy stands?

  • @thetoythief8940
    @thetoythief89407 жыл бұрын

    zubbie can you do a brick wall for venam and iv stapled my finger too

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Staple finger club! Members: 2 Can you tell me a little bit more about what you have in mind about a brick wall for Venom?

  • @thetoythief8940

    @thetoythief8940

    7 жыл бұрын

    Zubbie well the wall wood have holes for webing and so he can sit in it also a place for hostages to be held

  • @christopherdetorres107
    @christopherdetorres1077 жыл бұрын

    I was going to use this coloured green for a Starfire 'energy blast'. Then I realized that I didn't have the Starfire figure! 😕😆

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    That would be fun and that sounds like a good reason to do some Starfire shopping. ;-)

  • @christopherdetorres107

    @christopherdetorres107

    7 жыл бұрын

    😉

  • @rjannny
    @rjannny7 жыл бұрын

    cool

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks!

  • @rjannny

    @rjannny

    7 жыл бұрын

    Zubbie np

  • @goldendeerlingtheepics2ndc787
    @goldendeerlingtheepics2ndc7876 жыл бұрын

    Lugia, use Ice Beam!

  • @daveh013
    @daveh0136 жыл бұрын

    Can you narrate everything please ☺

  • @TheInfinityLion

    @TheInfinityLion

    3 жыл бұрын

    Morgan Frreman style lol

  • @doyouknowdawaymybrooda5823
    @doyouknowdawaymybrooda58237 жыл бұрын

    I've stapled my finger twice in a row first my index finger then my thumb

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Ouch! Another member for the staple club. It's good to know I'm not alone. haha

  • @edgarsuarezvega6540
    @edgarsuarezvega65407 жыл бұрын

    please pleaaasee make a DIY for flame efects!!!!!!!!

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    What kind of flames would you like to see? For example, flame effects that you sit on the ground, handheld flames, flames similar to the ice in this video, etc.

  • @edgarsuarezvega6540

    @edgarsuarezvega6540

    7 жыл бұрын

    Zubbie i would really really love so see flame effects that can be sit on the ground it would be awesome.......by the way and a picture of u im in love with you since u r a marvel legends collector with such a lovely voice 😍

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    +Gerardo Suarez I've made one ground flame effect a few months ago, but I wasn't happy how it turned out. I need to completely redo it and this time try a different technique. I've been getting a lot of requests for projects lately and I'm trying to juggle them all, but it may be a little bit before I can come back to attempt the flames again.

  • @edgarsuarezvega6540

    @edgarsuarezvega6540

    7 жыл бұрын

    Zubbie okay sounds bussy don't stress out so much wath is fun can turned into work by the way thanks so much for the wire cape it helped so much on my Moon Knight....... gurl marvel legends collector.....i got to know u gal!! 😍

  • @virtual9355
    @virtual93557 жыл бұрын

    Zubbie can u make weapons for venom

  • @virtual9355

    @virtual9355

    7 жыл бұрын

    sorry thought it glitched

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    That's no problem. What kind of weapons did you have in mind?

  • @joshualopes6179
    @joshualopes61797 жыл бұрын

    can you plz make a video for dragón ball z action figures.

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Sorry, I don't own any Dragon Ball Z figures and I don't know anything about the show so I'd do a terrible job of trying to make anything accurate for them.

  • @805spideyunlimited3
    @805spideyunlimited37 жыл бұрын

    good job zubbie

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Thanks Spidey!

  • @805spideyunlimited3

    @805spideyunlimited3

    7 жыл бұрын

    You're welcome zubbie and happy new years

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Happy New Year to you too!

  • @805spideyunlimited3

    @805spideyunlimited3

    7 жыл бұрын

    Thanks zubbie

  • @connorkazzaz7877

    @connorkazzaz7877

    7 жыл бұрын

    Can you please make a custom spider man web

  • @Lucid-BS
    @Lucid-BS3 жыл бұрын

    please make more videos

  • @thdr_lilz5672
    @thdr_lilz56726 жыл бұрын

    I got a staple in my head and I toke it out I was BLEEDING ALOT

  • @chma-js3ud
    @chma-js3ud7 жыл бұрын

    make a bag for Spider-Man action fIgure

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    +Latha Latha What kind of bag? Like a backpack?

  • @chma-js3ud

    @chma-js3ud

    7 жыл бұрын

    Ya your right

  • @FIGHTERSCHOICEArcade
    @FIGHTERSCHOICEArcade7 жыл бұрын

    I have stapled my finger before. it hurt slot

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Another member for the staple club. xD

  • @shawnj547
    @shawnj5477 жыл бұрын

    I remember one time when me and my niece was kids by accident Staples both of her fingers together

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Ouch! I just poked mine when I was a kid and it bled and almost repeated it a few days ago, but that sounds much worse.

  • @davebronx2637
    @davebronx26377 жыл бұрын

    sell me some!!!

  • @Thelewster15
    @Thelewster157 жыл бұрын

    I know a kid who once stapled his fingers together

  • @keshawndratucker2573
    @keshawndratucker25736 жыл бұрын

    I to cool

  • @prestomagic2356
    @prestomagic23567 жыл бұрын

    Can you do a spider-man web?

  • @dravennmedlock1998
    @dravennmedlock19987 жыл бұрын

    call it have a ice say get it..

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Is that a play on the phrase "have a nice day?" :-)

  • @DiakuKoi
    @DiakuKoi7 жыл бұрын

    I stapled mine

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Welcome to the staple club. lol We have more members than I expected.

  • @DiakuKoi

    @DiakuKoi

    7 жыл бұрын

    yep

  • @niko2454
    @niko24546 жыл бұрын

    444th like

  • @doyouknowdawaymybrooda5823
    @doyouknowdawaymybrooda58237 жыл бұрын

    Call the effect THE FROST BITE

  • @JaridBlaze
    @JaridBlaze7 жыл бұрын

    sadly, i have stapled my finger, more than once. so don't feel bad

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    It's such a relief to hear I'm not the only one who's done that. haha :-)

  • @nullnvoid2622
    @nullnvoid26225 жыл бұрын

    Shouldn’t be able to sense venom and carnage

  • @Ocram_sokart
    @Ocram_sokart7 жыл бұрын

    I love your shit

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    thanks :-)

  • @anobody1781
    @anobody17817 жыл бұрын

    Can you make guns

  • @Zubbie

    @Zubbie

    7 жыл бұрын

    Any particular type of guns you'd like to see?

  • @anobody1781

    @anobody1781

    7 жыл бұрын

    Zubbie a pistol of taskmaster

  • @allthatjazz4437
    @allthatjazz44377 жыл бұрын

    7:02 pathetic potty humor= my life?

  • @44thstudios

    @44thstudios

    7 жыл бұрын

    All That JAZZ it's a small world after all

  • @44thstudios

    @44thstudios

    7 жыл бұрын

    All That JAZZ it's a small world after all

  • @allthatjazz4437

    @allthatjazz4437

    7 жыл бұрын

    44thstudios i guess it is.

  • @44thstudios

    @44thstudios

    7 жыл бұрын

    All That JAZZ yep

  • @toyszone7749
    @toyszone77496 жыл бұрын

    j

  • @mindseyemelodies
    @mindseyemelodies4 жыл бұрын

    I bet he gets pee shivers too...

  • @tysonprice
    @tysonprice5 жыл бұрын

    he would get blockage lol

  • @Mad_Martigen
    @Mad_Martigen7 жыл бұрын

    Yes, quite a boring figure. No accessories at all. That's Hasbro for you.

  • @TheCynicalBee
    @TheCynicalBee6 жыл бұрын

    Is it just me or does she Sound like brick Queen. 😐

  • @jasongabriel565
    @jasongabriel5654 жыл бұрын

    Why does she talk like that..wtf lol

  • @SonNguyen-he8ib
    @SonNguyen-he8ib5 жыл бұрын

    cheap

Келесі