Barton Rubber Strap amzn.to/3NjKU6n Invicta Pro Diver 42mm amzn.to/3oTJEOT Check out my eBay store www.ebay.com/usr/cheapwatch_audioman Support me on Patreon patreon.com/user?u=80400579 Check out my other channel KZread.com/cheapaudioman Artem Watch Straps artemstraps.com Check out my watches on Ebay www.ebay.com/usr/cheapwatch_audioman

Why would people hate Invicta? The pro divers are my favorite watches ever

@Adrian_3006

3 күн бұрын

I think because it's trendy to hate on certain brands, I suspect mainly by people who don't actually have one or have had. Mainly because they're sheep 🐑😅

The work you put in is great and you don’t have to be a high end watch repair guy. Great strap too. Really appreciate your take on this Invicta transformation.

@cheapwatchman_official

Жыл бұрын

Thanks for watching

I’ve used this technique to take a fully high polished bracelet to a fully brushed look…I bought the fine and ultra fine scothbrite type pads on Amazon and the resulting brushed appearance on the bracelet was awesome

I like the shiny polished metal bushing makes it look cheap.

I have done this to several watches after watching an older video of yours. I practiced on a $15 Walmart special that was gun metal grey and removed the grey to give it a patina. Then felt comfortable enough to do it to a couple of other watches including a Pro Diver! Love the channel! Thanks

Soo.... you know that feeling when you're putting the strap onto your watch and the pin launches clear across the room? Ugh... that's me right now.

@fuhwurd

2 ай бұрын

Holy shit that happened to me a week ago and it took 2 days just to find it

Great video. This took me about 5 minutes and it looks much nicer afterwards, imo. Thank you!

The Casio Duro divers take this so nicely. I like to gift them and hit the sides of pretty much every single one of em with 1000 grit paper. Leave the polished chamfers and they look like a million bucks.

I just did this with my pro diver, as well as removed the cyclops. I like it so much more. I kept the original strap, but brushed the polished parts of the links so it all looks the same. Overall, very happy

Wow, this makes the watch look much better and more valuable. I will do this to all my cheaper watches now. Thanks a lot 💯👍

This was right on time. I'm a newbie, and just got my Pro Diver yesterday. Was wanting to do this! Thank you! New subscriber now!

@cheapwatchman_official

Жыл бұрын

Awesome! Thank you!

I did this to my Invicta Pro Diver. It really makes a big difference and looks much better.

This is a great idea, I'm pulling the trigger on this watch and I'll be dulling down that shine for sure.

This was awesome. More of this please!

I did this with a 50mm invicta tachometer watch. Turned out pretty kool. A lot light too. Have pro diver on its way to me. Going to get the same treatment. Kool video

I just did this to my Invicta pro diver and it looks great. I even did it on the oyster style bracelet (I always hated those polished center links) and it really feels like a new watch.

@jeffreyjackman7053

6 ай бұрын

Do you have pics of the finished product?

Poppin a comment to help along. Liked the content and video idea. Was fun for something new! I also have a few laying around I can try this on. Thanks for the idea.

Good video Subby, thats good work on the watch too, i did this to all of my Vostoks, this definitely helps those watches look WAY better.

Thank you for making this Video!

It looks nice. I sanded away the Invicta on the watch side and put on a green tropic strap, looks good. I also have a Pagani design jubilee with solid screwed links and endlinks that fit this watch nice.

My son gifted me the blue version of this watch. I have to say I really like it on the bracelet. Is it chingly (is that a word?)? Yes! But is it comfortable? Oh yeah.

@Thomas-fl2jn

2 ай бұрын

I like the bracelet too, I think it’s nothing wrong with dizzly bracelets, even vintage Rolex are dizzly. A Seiko SKX jubilee are known rattling but thats why people love them. But I like to put on a nice rubber or tropic strap too.

He's at it again 😮I'm thinking of doing it to my Milsub... Watchdives shiny sides. I have a very good after market bracelet (miltat).Capton tape is ideal for masking off areas that need protection from the green psycho pad....

The best thing of affordable watches; a collector can truly have fun with these watches by modifying them and add a touch of the owners style.🤘🏽

Also, for anyone attempting this, for professional results try to brush straight and in one direction. Sometimes going back and forth will look sloppy. The nekkid watch maker has a couple good videos where he does this. Ive picked up good tips from his videos.

Pretty cool. I’d like to try this with my San Martin sub and see how it looks…looks great on the strap…

Did this to my Mako II after watching the last vid. Love it. I wear it on a NATO and it looks D🔥PE, much more appropriate with the vintage sub ceramic bezel insert and coin edge bezel (edit: 1st mod, but yeah, the polish always felt "off"). Much more tool-ish, it looks like an old Milsub now. Love it, great video.

I like your brushed version much better! I would go a little further for my taste. Maybe use the red pad, or 600 grit sandpaper. Love the Channels!

@cheapwatchman_official

Жыл бұрын

thanks!

What a channel! I'm joining the crew

Nice mod I agree its an upgrade. Jubilee band = cheesy. I just joined the Invicta fraternity. Green Pro Diver 40mm Automatic. $79 on Amazon. It has the Oyster style bracelet. Ill leave it be for now I didn't know they offered a larger 42mm. I DO have 2 Casio Duro dive watches, a black & a blue face one. (Battery, not auto) They're 42mm & on the blue face one I upgraded to the heavier duty fully brushed bracelet - huge upgrade in terms of heft & wearability.

I thing Invicta gets a bad wrap. Yeah sure some of their watches are gruesome but they can produce some really nice pieces. One of my first mechanical watches was the invicta sub mariner. It’s been everywhere and still works like a trooper. I still wear it now and again. Your watch at the end looks fantastic. I’d definitely wear it.

Did this to my Invicta and a Steeldive and both look 100% better / Orient Macko next have the same blue one you have / thanks for the video

Nice. Might also lightly sand with a very fine (wet or dry) emery cloth.

Good idea!!!

nice outcome 👍 i did this on my seiko sea urchin and put a rubber strap. definiteley looks better. more toolish. may i suggest also change those mercedes hans to somerhing like skx or seamaster hands. i think it would look really cool

The red scotch pads are a finer grain and give a better finish. I usually use the green to start and finish with the red. Great videos btw really enjoying your content 👍🏻

I have the Pro Diver 42mm as well. Its alright, except the INVICTA on the side, and the second hand with the wings counter balance. I'd like to change those aspects and rub it all down like you did here. Nice job!

@cheapwatchman_official

Жыл бұрын

thanks!

I followed your instructions and now my watch is all scratched up, you owe me a new watch! Just kidding. I took the high shine off my Invicta and man it looks great! Thanks for the video!

Maybe I’m weird but I kinda like that jangly bracelet…it isn’t that much worse than an original Rolex jubilee

Eh, I think the polished finished suits it just fine. So does the brushed - but it doesn't elevate it IMO. The strap does, though. To me the real elevation comes with a dial/hands change.

i have of these with the 3pc band i definitely been meaning to do this just lazy

Well that was fun

Love it

Would look great with curved ends to fit the case.

The maroon Scotchbrite will give you a more pronounced (deeper) grain.

anyone got word on how it would be like to remove the bezel marlon brando style .?

7:04 Have you tried/has anyone tried to shave down the invicta on the side? I was thinking a dremel tool with a light grit bit followed by a polishing bit. I love the polished finish but would like to incognito the case Side note is that I now have to convince my wife to let me get the 8932ob considering I just bought the 8932 yesterday😂

@srakich4819

4 ай бұрын

I removed the huge invicta on the case side with a dremel then sanded, the entire case and bezel are now sanded. I replaced the beat up bezel insert with a new one. Changed out the scratched up crystal with a new sapphire one and swapped out the dial with a custom dial. Put it on a nato strap and now transformed a worn out looking 17 year old watch into a cool looking new watch like no other.

Always quite liked the look of this Invicta Sub copy. Tho imo if you want a Rolex homage for cheap that looks $800 I’d get a more ‘premium’ Chinese special like San Martin

@Bertminator

Жыл бұрын

San Martin $360 watch to me is not a "Cheap Rolex Homage" and don't look much better than the Invicta Pro Diver IMO.

@nintendokings

Жыл бұрын

@@Bertminator $360? I bought my 3 SM for $200 or less and can guarantee you the build quality and finish is way above the likes of the Pro Diver or Orient Ray. For example my SN006 was $200 during a sale and it’s laughably better quality than my Ray II

I did the same thing to a vostok amphibia and its like a new watch now.

@cheapwatchman_official

Жыл бұрын

I still need to get one of those

@user-ig6nu4oo5p

Жыл бұрын

@@cheapwatchman_official I'm really struggling with any thing russia related this days, but its a cool watch if you know what it is and don't have unrealistic expectations from it.

that custom hand finishing boosted the victa's value into the thousands.

@I-Libertine

Жыл бұрын

(On sale 85% off)

@djdelarosa25

Жыл бұрын

In what world

It's Zarats-YOU polishing.

Yup I am in actually I have the Emotiva b1 plus running on 1990 Kenwood 5150 and dude I am stuck for words how I want to thank you for your honest review

@cheapwatchman_official

Жыл бұрын

Glad I could help

@randybehenna3081

Жыл бұрын

@@cheapwatchman_official oh dude you really have no idea I was on my way out and I found you

@randybehenna3081

Жыл бұрын

Honestly my friend you need to sit your butt down and listen to this not a bunch of money invested but holy bleep

👍🏽

So I have to ask - is that really coffee in your mug? Now back to the video

I think you left a place to sand, you can still read INVICTA 🤭

NICE JOB BUT I THINK INVICTA MAKE GOOD WATCHES I BOUGHT A FEW WATCHES FROM THEM FOR MY COLLECTION AND THEY ARE AWESOME NICE VIDEO

do you think invicta watches are a good investment?

@cheapwatchman_official

Ай бұрын

lol. No. Most watches aren’t

Idk bout you guys but my watch came green on the lume oarts like ugly green hue

Whats wrong with the original shiny look?

Just use a steel wool. 😅

Great topic - cheap polished metal segments really diminish the look and appeal of a watch!

People just need to buy a Steeldive, Addiesdive or a Pagani Design to buy an $80 watch that looks like $800.

You could have spent an extra 10 minutes and taken the watch apart. Open the case, take the crown stem and movement out. Pop the bezel off and even pop the crystal out of case and caseback. Then sand it properly. Clean everything and reassemble. Would have been easier and better results. Even replace the dial with a sterile one.

@ivoshandor6859

27 күн бұрын

Dude. It wasn’t a long drawn out refurb video, it was a quick, “Hey, let me show you what you can do with a strip of Scotchbrite!” Go to wristwatch revival if you want to see those.

So, by your example, Randy... since my Pro Diver cost me $53, if I do the same process to it... it'd be worth $530. If I do it, would you accept it as trade on your Hamilton Murph? :D (Hint: Any answer other than 'no' is wrong. If you are compelled to answer positively, I suggest consulting a mental health professional.)

@cheapwatchman_official

Жыл бұрын

I can't argue with your logic, Fred

Aw, no, I thought you were going to brush that awful invicta logo from the side of the case. Well that's let down 😅

How hard would you have to brush to get that god awful branding off the side?

@srakich4819

4 ай бұрын

Grind it off with a dremel tool then sand, starting with a course grit working to a fine grit until the finish is what you want.

Instead of pretending to have a $40,000 rolex, disforming an inRolex, why don't you go by a $40 000.00 Rolex and quit being a Karen? INVICTA Put the brands on that watch so they wouldn't be accused of copying a Rolex you have it all twisted. I wouldn't dare take A3M scrub pad to my invicta because it is. Beautiful as it is

...... theres absolutely no difference... I want 5mins of my life back.

get that sucker off your wrist bone. do a push up, if your crown hits your hand, it's too low.

@cheapwatchman_official

Жыл бұрын

I try to avoid pushups

Sorry this is unwatchable with the ridiculous music inserts. Respectfully

Too cool for school...

This is a superb way to make a $60 Watch look like you spent at least $75.