HOW TO MAKE ALL MOTOR 13B POWER..11,000 RPM / 370WHP
Автокөліктер мен көлік құралдары
Shop :
www.mochibutt.com
www.angelmotorsports.com/coll...
Instagram:
/ vargas_fb
/ rx7vargas
Facebook :
/ angelmotorsportsva
Subscribe to Angel Motorsports:
/ @angelmotorsports
Пікірлер: 388
They built the kei trucks engine and they need to tune it. The end
@jean-christophegallant8855
3 жыл бұрын
I don’t get why they didn’t
@RastaRocker614
3 жыл бұрын
@@jean-christophegallant8855 they still running a business and from the looks off it they ain't near cali, hoonigan/worthhouse need to fly them out and pay them for the tune, they wanne safe that money probably haha
@LettersOnKeyBoard
3 жыл бұрын
he did say they are in Cali at the moment, maybe that's what they're doing
@simondupuis23
3 жыл бұрын
They have a shop in Cali and Virginia
@mattk9438
3 жыл бұрын
Let's be real, there's a video of the kei truck being driven from the moment it started running. I don't think the plugs ever got changed before that dyno run, so from the moment the car fired up, it was compromised.. That's the number 1 thing I took away from the few vids I've watched from Angel motorsports... Always have fresh plugs.
Finally, some proper rotary tuning done by the professionals 👌🏽
@matthewmcclain1316
3 жыл бұрын
Shots fired 😂
@aarong1687
3 жыл бұрын
Unlike Suppy and his workmates lol😂
Love how Angel Motorsports fired back at Hoonigan for the Kei truck, so awesome.
@jay_wright
3 жыл бұрын
I mean could it be that Mike traveled to Cali to possibly work on the Kei truck considering it's already been done and delivered back to the Donut Garage and now it's gona get a proper tune? Find out on the next expisode.
@MrDJAK777
3 жыл бұрын
Notice how they heart almost every comment but none of the ones talking hoonigan or the kei truck? yall are way too deep into this, creating drama that isn't there.
@markg1495
3 жыл бұрын
Madarius agreed. These dudes are cool. They’re running a business. Chill
@freikinpoptarts
3 жыл бұрын
@@MrDJAK777 Because suppy is still an employee of Hoonigan, and shit talking an employee of one of your clients isn't very professional or good for business. That is their engine in the kei truck though. They do need to make it clear that the low power made from it is not the fault of Angel Motorsports. This video is fine but I hope a statement is made on the Hoonigan channel to clear up that bullshit. I personally saw multiple people in the comment section of the dyno video saying they "didn't get the point of rotary engines" and so on. Suppy's handling of the 13b has hurt Angel Motorsports at least barely. That is pretty fucked up.
@mustangdemon87
3 жыл бұрын
@@freikinpoptarts exactly. People don't get it they aren't just sayin shit online. They are fucking with peoples whole business an life
I think you guys might need to help the hoonigans with kei truck, making no power with the 2 rotor!
@Foxtooth88
3 жыл бұрын
Yeah, I feel like this video is in response to the Kei truck.
@drqusk
3 жыл бұрын
@@Foxtooth88 How much power does that kei really need? It's gonna get dangerous really quick.
@Glumpuzzler
3 жыл бұрын
theyre making power, they broke the axle big ooof
@joealex65
3 жыл бұрын
They BUILT that engine man, looks like you live under a rock! They know we will riot if they don't let Vargas tune it!
@jay_wright
3 жыл бұрын
@@drqusk The real question you should be asking is why not? Look at Coopers Mystery Machine, that should give you answers.
We need to see you guys tune the kei truck
@damienbritz1766
3 жыл бұрын
Actually
@PaintballerHaven
3 жыл бұрын
Or had them build it
@wolfnz9543
3 жыл бұрын
Yesterday !!!!!!!!!!!!!!
@avalos15100
3 жыл бұрын
Yes!!! It shouldn’t only make 160 HP that’s so little
@isaacwilson9825
3 жыл бұрын
So true. 160 hp is not enough
they are huge numbers for NA wow dude well done good show, stay blessed guys.
@austinmiller8695
3 жыл бұрын
Soooo much power for na for sure
@dubbleA100
3 жыл бұрын
That's normal for the guys in PR and australia
@crteaser9726
3 жыл бұрын
Why didn't hoonigan have you tune the ktruck for them all they got was 160hp
It's like just when you think that's as high as it goes it keeps climbing. Like when vegeta went super saiyan for the first time.
Hoonigan: **Get's the Rotary Kei Truck running with a sh&t tune** Vargas: *Let us show those f*ckers how to make power with an NA Rotary!* 😈 I'm just joking, i love Hoonigan and the Vargas bros, but i'm kinda mad that Hoonigan acts like the Vargas bros don't even exist, i hope everything is good between them!
@jay_wright
3 жыл бұрын
That's not the case, they have businesses they need to maintain, can't always be gone doing shit for Hoonigan. Also notice how both of the Vargas bros back in Long Beach where Hoonigan is located.... coincidence?
@joealex65
3 жыл бұрын
@@jay_wright Yeah, i get that, but have in mind that John buit that engine in the Kei Truck and he knows what he did to that engine and only he knows better than anyone the limits and how to tune, i never said they shold've done the whole build 😛
@Woke_R2
3 жыл бұрын
they comment and like eachothers posts on social media.....they all have schedules to follow cant drop other jobs just for hooni
@Mojoqwerts18
3 жыл бұрын
We're in the middle of a pandemic. Can't be flying cross country constantly due to health reasons (Vargas bros are in VA). Especially when they've got months long wait lists for their work. @i_break_necks has been waiting on an engine from Mike for months.
@jay_wright
3 жыл бұрын
@@Mojoqwerts18 Even with the pandemic they've been traveling, look at alot of youtubers videos. Also they're not both located in VA, ones on the east coast, other one the west in Long Beach.
By far the best youtube channel out there! Could watch you guys mess with rotaries all day
i like how the flames do a dramatic, strobe-light show just before max rev and then going out with a bright-flashy bang
This is the only channel that I regularly watch the full intro to.
@boost3d831
3 жыл бұрын
Haha same
The sound on the dyno is amazing. rpm is incredible to hear. Nitro runs whoooo hoooo holy crap fireball
you guys and rob dahm would make a crazy motor i think
@seudechrist
3 жыл бұрын
They already do work together quite a bit
@ValentineC137
3 жыл бұрын
@@seudechrist not tuning wise, Rob's seemingly aiming to become very self-sustainable. Doing tunes and fab-work in house
@seudechrist
3 жыл бұрын
@@ValentineC137 yup
@Jake_Hamlin
3 жыл бұрын
Rob just wants to learn, doing it himself rather than paying someone else is just how he likes it. He has had the brothers in atleast one video before
@seudechrist
3 жыл бұрын
@@Jake_Hamlin he sure has, vargas brothers believe in the same philosophy that dahm does, rotaries are not magical instruments they are actually easy to work on and reliable engines when balanced properly
should do build walkthrough for na power. would be great resource like step by step of instillation of aftermarket intakes ect.
That has to be the loudest 290/360 rwhp car I have ever heard.
That intro with the music always puts me in a good mood, reminds me of my Abuelita Carmen.
Lol right after kei truck makes no power shoulda took it to the rotary professionals
@aarong1687
3 жыл бұрын
I don't trust Suppy's work btw
@antisobriety4201
3 жыл бұрын
Lol suppy has no faith in Doritos... He prolly slacked on so many factors with that poor swap that 160 was the best they could get without blowing tf up!
Thank you so very much! I've been thinking about the practically of a carbureted performance 13b build (no nitrous) for a future project and now I have some realistic expectations and it should work very well for my needs so thank you very much. When the day comes I'll definitely be coming to you guys for a built motor. Keep up the great work!
I missed the rotary intro.
I was like: yeah man, that sounds rowdy! And the engine was: wait, there’s more! 😱
The rotory wizzards Back to the basics....cool info and great tuning as always....💯👍
Gawh damn that's one wicked engine
😂🤣😂 John saying Cabrón Esta Polqueria!!!
Love it, just too bad my little boys had to go to bed and miss this new upload but they'll catch it tomorrow.
I love how much knowledge the Vargas brothers have. Could listen to this knowledge all day. Yes kinda upset Hoonigan didn’t let you guys tune the Kei truck. But got mad love for Hoonigan and Angel Motorsport
I love all motor stuff, I hope seeing more of this on the future
@matthewmcclain1316
3 жыл бұрын
Put a 13b in your Beatle. 👌
@bob19777
3 жыл бұрын
@@matthewmcclain1316 I would love to, but there wasnt any rotary engined cars ever sold at my country
@matthewmcclain1316
3 жыл бұрын
@@bob19777 that sucks. Importing from another country would probably be stupid expensive too. Plus parts and maintenance. Rough
@bob19777
3 жыл бұрын
@@matthewmcclain1316 yes, and the dollar is too expensive to my currency and there is so much taxes its ridiculous, so i'm just gonna build the aircooled all motor
Just send me the invoice already I mean DAMN
Yo that car revs like a Ducati😅
@collincurtis5024
3 жыл бұрын
Sounds like a Yamaha banshee in the low end 🤤
More high rpm dyno vids please! It really gets the rats running out of my walls
Ohh my gosh. It just never stops reving! It’s like a choir of angels hitting a high note all at the same time!
THE YEET BROTHERS
I love the NA rotary content! Keep it coming!
I just learned something new😁,thank you Vargas brothers 🙏🏽
Just crazy rpms! Love to come by!
Just needed them Vargas tweaks!! That sounds crazy!!!
thanks guys, you have sucessfully blown my eardrums out my head!!! loved every fire ball belching moment in this vid!
Please do a video of what goes into an engine like this 7s with no boost thats insane 🤘🏽
I miss my GLC so much Was 1978 Great Little Car had 13b Bridgeport with Holly and Racing beat intake and header. Those were the days Rotary Power 🇵🇷👍
that car sounds wicked love the high rpm pulls!
That thing just sounds evil! Like playing with dynamite! I love it!
I been waiting on you guys video 💪💪💯💯
That sounded amazing! Keep up the amazing work! Would really love to ride in one of the whips one day for a belated bday ting! I’m in VA 😭
Absolutely incredible sound! What a beast 😀
yea 13B PPs have been making 330 at the flywheel (aprox 280-290 wheelHP) since the early 80s. My dad took a 12A PP to Le Mans making 280 at the flywheel for the 24hr race but not at 11,000 RPM holly cow!!! PS: i have permanent ear damage from the IMSA rotaries, wear ear protection, PPs will make your ears bleed
The best Rotary Channel on KZread NEVER disappoints!
Always love the intro 🔥🔥
Mochi! Mochi, the brothers, and a fireball tune. Great day! Especially after watching the Kei truck video.
Puerto Rico en la casa puñeta!!!
Much love and respect from Texas 817
Damnnnnn boys... you've done it again!!!
Pretty awesome when you hear it go OVER 9000!
What a lot of people are forgetting about kei truck is that there is no room in the "bay" for a proper intake. You literally sit on top of the engine. it doesn't matter who tunes it. If it doesn't have a good intake and exhaust on it then power will be down and in this case, it is.
Seeing these NA motors and their capability i am now fully convinced that rotary swapping my 92 crown vic is the right move. To be clear i dont want to drag race it or even expect it to be super fast. I just want everyone who knows anything to wonder why a beefy american passenger car sounds like its got a weed eater under the hood.
¡More mochi!
This video belongs on 'best of internet'.....crazy power from that dual dorito.
Team los killi en la casa🔥💪🏻💪🏻
I've been thinking about making a rotary t-bucket and this is the type of thing I needed to see.
Starts the power run where most engines stop revving, then burns the workshop! Love rotors! Not saying anything about Brapp Pit. Great content.
When that fire comes out of that exhaust 🔥
Wepa Buen trabajo 💪💪🇵🇷🇵🇷🇵🇷
PP rotary idling is sweet music!!! 280hp N/A thats badass!
Yabucoa Puerto Rico 🇵🇷 in the house
I was fooled! I thought the car in the intro was a starlet.
Sounds really nice up top in the sweet spot.
Love your creations! I wish I lived closer I have a ‘95 525i that I can picture a 13B NA in it for a daily driver❣️❣️
I miss those Starlet's. Almost impossible to find. Remember them from back in the day, Moroso in WPB. Peanuts rule.
@andersonmorgan760
3 жыл бұрын
Starlets? I thought he said those were glc's
@05glisedan
3 жыл бұрын
Could be. Looks like a starlet to me. Those were cool also..
this how the mystery machine should be . lets get rowdy sir & sir Vargas
My dad owns a glc, it’s not rotary swapped but it’s conquest/starion swapped making 600hp if I remember. Man glc’s are the best looking cars from the late 70’s early 80’s.
Damn son!!!!! Shiiiiiiiiit thats badass!
Hello from South Crackalacka MOCHIIIIII
love the intro bro
Love your vids. 👍
About time
The motorcycle carbed one probably sounds Soo cool!
Got to love that Rotary Power lol 💯👍👍👍
As the owner of a REPU with Webers, I love this video.
This is the intro car. Ahhh nice
What's the trick to get it to rev so high? Love how you guys throw around 10-11k rpm like its no big deal ;)
Always a 🔥video
Whole video is a sly jab at Hoonigan Kei truck. Nicely done
Wow how hard and fast do u get that motor spinning Mate well done 👍 engine sounded like it was loving. it wanted more
You know that it's getting serious when you hear que se prepare el huele bicho este
As always the only videos that I need to turn the volume down on
Awesome 🔥🔥🔥🔥👍
Y'all trolling hoonigan and i love it😂😂😂
Puerto Ricooo en la casaa PUÑETAA
gotta love the BRAAAAAPPPPPP
I thought my monitor was going to explode LMAO 11,000 RPM! Not my speakers but I actually sat back in my seat the higher the rpm thinking. What the heck is going to happening? lol!
Making me want to not slap a turbo on my s4 swapped fb lmao
Sounds like a banshee lol but dam that shit shoots some big flames that door is getting cooked !😂💪🔥🔥🔥🔥
Puertoricans the kings of Rotary's and Hondas
Old mazda 323 in South Africa. My brother in law had one sadly without a rotary or there would have great fun
Wuelebicho y To 😂 !! Ustedes son unos problemáticos 👹✌🏻
More more more 👍👍👍👍👍
Skills. Think it spins the tyres too ...
Those flames at 9:40 oooo my
Holy rev!!!
Holy fuck, that engine just kept winding up and up, thought it'd never stop raising rpm haha. Always wondered what the intro car was. Pretty sick!
Super helpful
The comment I wanted to make I couldn’t 🤦🏽♂️ YALL BOWYS UP THERE🤯