That was Awesome and well made 👍

Awesome pump works great

Can it reach up to 60 psi for a reservoir air tank ?

That’s genius really awesome 👏 👍 🙏

Excellent project 👏

A very great job! I like it !

Very professional job

Use a good background music as the previous ones please.... 🙂🙏

Cool design

Great videos that I enjoy

The idea is good 👍👍👍

Beautiful project. Congratulations!...I loved the PWM pcb, Please could you share the diagram or pcb?

Gut gemacht

Nice video ❤️

How match pressure this pump make create?

Nice video

Контроллер обошелся дороже, чем автокомпрессор на али.

The air can only go out because of the rubber block, so there is no inlet? Isn't that more stressful for the motor, since the air has to come from creeks in the seals?

@DIYwithBatteries

3 жыл бұрын

Good point Dude 👍

@skottie369

Жыл бұрын

The o-ring inside the piston moves slightly from back to front between the two white piston plastics. The piston sucks the air through the perforated hole in the piston itself, and the o'ring seals on the "push" stroke. Look at the piston assembly at 1:31 to 1:40 , and you will see. There is where the magic happens. (The inlet is actually the four holes on the motor side, and the piston pulls the air to the valve side before compressing it with the o-ring.)

@jopiloot

Жыл бұрын

@@skottie369 I didn't notice it, but you are correct! Thanks

@saadwaggi7446

Жыл бұрын

Where from i get this o ring and piston

Just found your channel and Subscribed. Nice work

Nice project

@Tomas_Prucha

3 жыл бұрын

🔥🔥🔥

Nice

Perfecto 👌

Which of air in

Muito legal

Hay

好久沒看到新影片了⋯⋯

can it be used for car tyres?

@UpDownTrivia

Жыл бұрын

Did it work??

@atastycloud

Жыл бұрын

yes but you need to change to a stronger motor

the working cylinder had to be made of a metal pipe

Fantastic work, dude! Nicely done! 😃 Stay safe there with your family! 🖖😊

Sale mejor y más rentable comprar uno ya hecho

👌👌👌

08:22 🧐 you are kidding me.

I still can't understand how it works!!! There is a valve, so as not to let the air back into the cylinder when the piston reaches it. However, I don't see where the air enters the cylinder, when the piston goes back to the opposite side of this valve... There are usually two valves next to each other... One to retain and the other to let the air in, by a different path from the exit.

@skottie369

Жыл бұрын

The o-ring inside the piston moves slightly from back to front between the two white piston plastics. The piston sucks the air through the perforated hole in the piston itself, and the o'ring seals on the "push" stroke. Look at the piston assembly at 1:31 to 1:40 , and you will see. There is where the magic happens. (The inlet is actually the four holes on the motor side, and the piston pulls the air to the valve side before compressing it with the o-ring.)

@ricardodm9241

Жыл бұрын

​@@skottie369 thank you so much for your excellent explanation... now I got it right! ;)

@JohnnyJr396

2 ай бұрын

@@skottie369what is the point of all the notches on the disc in between the two pistons? I see what you’re saying about the o ring sliding from front to back but the notches don’t make much sense to me. Also if the solid disc is closest to motor side how does air pass the disc?

Pesen satu bang

@royan.jdm2

16 күн бұрын

Nyasar kejauhan ngab...😂

+

Improve your background music please 😊