How to Make a Working Motorcycle Key
Автокөліктер мен көлік құралдары
For motorcycle keys and key cutting service visit:
www.carlocksandkeys.com/honda-...
Link to the Smallengineshop forum
www.thesmallengineshop.net/sma...
This video shows how to make a working key for most motorcycles.
Thanks for Watching
Пікірлер: 127
Dude. Its people like you who make KZread one of the greatest contributions to humanity. I don't even need s motorcycle key, i was just trying to find out where i can get a duplicate made without driving all the way to Yamaha. But dope video. I learned a lot. Thanks
@rogeresquiviasjr.2042
Жыл бұрын
Y
its videos like these that just instantly solve all your problems
Lost the Key for my Bike and a replacement is going to cost a lot. This Video is Brilliant. I am going to make my own now you have shown me how to do it. Thanks man😊👍
Brilliant, very clear and well explained, thanks for sharing :)
If you go to the trouble of removing the ignition switch, often the key code is stamped somewhere on it, and maybe also on the other locks using the same key. If you find the key code, that's all you need to get a replacement made from a motorcycle dealer or locksmith.
@davidmundy1333
Жыл бұрын
P
@alangrant5278
11 ай бұрын
Yeah good point but where the challenge in that? 🤣
@alangrant5278
11 ай бұрын
If you get the lock out you could just get the pins out so a blank key would work. Quicker to get you going. Would anyone think that your lock works with any key? 🤔
Your Amazing! Best video EVER!!!!!
THANKS; VERY CLEAR VIDEO.
Great vid..... worked a treat thumbs up
OUTSTANDING Video, I was perplexed on how a ignition switch worked. Thank you so much, Don. San Jose, CA. 10-31-2023.
@Again4655
3 ай бұрын
I like your end lines of this comment 👌
One of the best vids I have watched on this subject , Thanks ..! Thumbs up man..
@smallengineshop
8 жыл бұрын
+ShawnMrFixit Lee Thanks
@SarwarKhan-sh5bo
6 жыл бұрын
I want to learn more my job thanks to Dr lock
@smallengineshop is it possible to use a screw extractor (e.g. 2-3mm) to remove the two block cylinders instead of drilling them?
Thanks for posting - very clear and helpful
This is an interesting method. thanks for sharing.
Great info, thank you.
Good video...very insightful...thanks
Great video. Thanks, hopefully I can get my scooter back on the road
Great video! Very informative
great info, thanks!
Awesome! Great job
Thank you for caring!
Friggin Brilliant buddy Thanks
mark edge with a black marker to make easier to see the wafer marks. Also most switches have a key code stamped on them
@fryloc359
3 жыл бұрын
Yeah I got my key code and bought a key on ebay.
did Ignition key hole water resistance? it's has hole for water drop leak if accidentally water going inside the key hole?
Hey so nice clip video every thing clear pic voice so nice I am key cutter thanks Raja london uk
Great video, I've been talking the wafers out lol now I know a few steps pore will get me a lockable lock
@hmobb7838
3 жыл бұрын
So correct me if I’m wrong but if you take the wafers out you could technically start the bike with anything you can fit in the ignition or what?
I lost my motorcycle key took it apart and order a key with the code # . Looking i the cylinder I though met be with a file and a blank key I mit be able to make one . Thanks for the video you just gave me the will to make one good job 👍
I'm assuming if you want the key to be double sided u do the same to both sides of the key. Cool. So where do you get blanks? I've done house keys before, but they're usually easier to get to the pins. But u gotta have extra pins if you lose one or a spring. Thanks man.
Absolutely amazing
Good vid.
Great video
Thank- You.
Great vid. 👌
Good video thanks
Awesome! Thank you :-)
Champion of best video
kz650 80/81. Ordered the key and have removed the lock. However there is no obvious pins to pull. Anyone know how to pull this one open?
What did you use to file down the key
That’s cool 🤙🏽
That's a first for me. Pretty cool information, thanks.
@smallengineshop
8 жыл бұрын
+wyattoneable Thanks
were did you get the key from
This is also great for all custom homemade diesel motorcycles also.
THANKS !!!
appreciate the video, so if I have an existing OEM key and wanted a locksmith to rekey an ignition switch, it's possible?
@Whispering.Graves
Жыл бұрын
That's exactly what I'm going through right now
BRAVO!
Thankful
There should be law that requires manufactures to provide replacement keys with proof of ownership. Many car companies do this already but its ridiculous the heartache people go through for something as common as the misplacement/loss of a vehicle to which legal proof of ownership is demonstrable.
thank you for sharing this video, very well explanation and completely unacceptable.
Anyone know where to get Cheap blank keys for a 2007 ninja Kawasaki 250 ?
I own a 1985 Ninja 600R, which sat in my garage for 35+ years, and now ready to get her back on the road, bike was stolen in 88, but got back in 89 so I have a separate ignition key, which I had made from the code, and was able to make another set of keys for the helmet/seat locks, but it doesn't match the gas tank, any thoughts on where else to find the original key code for the bike? Any help would be great. Would prefer not to drill the lock out, thanks
man wish i showed my boss this today...
I have a 82 maxim I lost keys for. Really need done
I was just thinking if you use a marker dye, it might be easier to see the wafer hit location
How to remove the keyset from HeroHonda bikes?
Did you say size of files i try HF they dont seem to works
Thank you for your vlog I learned how to open my brother yamaha motor 🤣 hehehe ciz I don't know to open the lock for key
how did you remove from the motorcycle?
What's the name that part
best
what if i buy a new ignition lock with key and want this key to match the gas tank and the helmet lock?
If your a mechanic and not a locksmith. Best way to quickly make a double sided key is to 1.). get your first side done with the file as the video showed. 2.) take a second key blank and take a pair of vise grip pliers and put the two keys identically together and clamp down with vise grips 3.) use a Dremel to match the new key blank with the already cut key. 4.) flip key over and cut the second side of the second key as well as the second side of the first key. Hope that makes sense in words. I’m an automotive locksmith so I have machines to do this. But I also have had to do this when in a pinch. Hope this helps someone
If you have a key that does fit but the waifers are proud, FILE THEM FLUSH, This way,you have a solution where you cannot get a blank,which is almost always the case. Many keys fit,many locks,it is not unusual to find European car keys for the job.
Where can I get a key blank for my motorcycle? A hardware store? Home depot?
@martinparker6536
6 жыл бұрын
you may find some places are reluctant to sell you a blank for obvious reasons
@ninesixteengenetix
4 жыл бұрын
Amazon.com
hai
👍👏👏
so in theory of the wafers were removed a blank key would work?
@Duggan506
8 жыл бұрын
+Matthew Duncan You could use anything once you take the wafers out but why would you? there would be no security benefits at all.
thanks you just save me 150$ to buy a new switch from my scooter shop! :)awesome
@danielsorenson6682
4 жыл бұрын
Same here
@RareBM
2 жыл бұрын
Makes 3 of us!!!
Shot bo mean vid
wouldn't it be easier to just file down the Pins?
@Owen.T
4 жыл бұрын
If you just file down the pins. Any blank key could start the bike
Can I send you a lock like you showed and you cut the key for me? I would pay of course. Thank you!
When my ignition lock stopped working I just bypassed it with a toggle. I put the key in for show and flip the toggle, and away I go
@devoonbmx603
Жыл бұрын
Where’d you put the toggle
@lucyfuir6386
Жыл бұрын
It's kind of tucked in where the seat meets the battery cover. I did not install it permanently it kind of just sits there. I still put the key in the lock and turn it before I flip the switch so anybody watching thinks it's just a kill switch not the actual ignition. I also used bullet connectors in a way that I can take the toggle out and hardwire it straight through With no tools in case the toggle ever fails.
I lost my key to my V-Star 1100. I may try this.
@bleep4344
3 жыл бұрын
I just lost mine also to my 650 what u end up doing?
@poseidon5003
3 жыл бұрын
@@bleep4344 new ignition.
wouldve been so helpful if i had a phone
Im still not sure if i lost it BUT THX MATE MAYBE WELL MAKE ONE SUB AND TUMBS UP
Come to my house
Gently tapping the wafer does not require the force with a hammer that you use. Be gentle dude.
You dont need to take anything apart if you're a real locksmith. There's a tool called a "Lishi Direct Read"
There pins not wafers
EBay 20$
A small vice would improve your filing technique, it’s terrible.
Your Amazing! Best video EVER!!!!!
Your Amazing! Best video EVER!!!!!
Your Amazing! Best video EVER!!!!!
Your Amazing! Best video EVER!!!!!