Хорошая идея! Я бы добавил на передние стенки кармашки для бумажек с указанием содержимого, чтоб сразу найти нужное. Если таких органайзеров много, поиск, бывает, затягивается. Удачи!

Всё новое хорошо забытое старое. Помню в моё детство у отца такая "заводская" шкатулка была для радиодеталей. Хорошая работа.

Спасибо за отличную идею. Всем здоровья и мирного неба. Каналу процветания.

I normally don’t like these maker/repurpose videos, and while I have no intention of building a little tackle box, I must say that’s absolutely ingenious. Using pvc pipe as a raw material? Absolute brilliance. I can definitely incorporate this into some of the projects I make.

@jgetscensored7837

2 жыл бұрын

It actually just dawned on me, I have a broken bracket that supports the glove box in my wife’s car. Can’t find a replacement anywhere, not even at the dealer. I bet I can make it though. I’m going to give it a shot.

@AmirKhan-qx2lr

Жыл бұрын

@@jgetscensored7837 a 3dprinter would help here

@APinTheAK

Жыл бұрын

@@AmirKhan-qx2lr well no shit... a 3D printer would help in a ton of situations... it’s not like a drill or screw driver... you won’t find it in most people’s homes...

@ekstrapolatoraproksymujacy412

Жыл бұрын

@@APinTheAK which is strange because its cheap like a drill

@user-fv4kr9qz5z

Жыл бұрын

it will be much cheaper to buy a ready-made organizer, and no problem.

Creative!!! This was creative for me to just warm up the PVC pipe and make it flat, this guy goes way beyond creative for me. He's a GD genius! Awesome creativity!

Nice job. I'm quite surprised about how plain you made that tube to become. I'm from a country where good working materials are hard to find and expensive to buy, so this is a huge thing for me. Thank you for sharing this!

@obsoleteprofessor2034

2 жыл бұрын

I'm in the United States and I am a part time electrician. In this country, because tradesmen are paid a high wage, no one bothers to salvage any material. I have made a good living going to construction sites where offices are being remodeled. the workers tear out walls and throw away everything in the giant trash bins. I always look into these bins and many times I will find much tubing, electrical boxes, wiring, good wood. When the drug addicts found out they could make money selling scrap copper, they would even go into vacant buildings and tear out all the wires possible. they would also remove the concrete covers at the base of street lights and pull out wires from entire districts. If you are looking for a skill to make a good living, I would recommend learning simple electrical repairs. I also repair and sell used washing machines and dryers that people throw away.

@ggsj

2 жыл бұрын

@@obsoleteprofessor2034 In my country they sometimes go as far as stealing wires from the street posts themselves, even it means cutting power from whole neighborhoods. About making a living, if I ever manage to leave my country I don't plan on being too choosy about work, as long as I can do it, it's legal and my knowledge and experiences are useful. As an example wouldn't mind going back to being a forklift operator as long as the workplace is decent (in more than one way). Every honest job, done in a proper environment where respect is a rule, is a good job.

@thesaneparty4079

2 жыл бұрын

@@ggsj You sound like Americans are supposed to sound.

@electronicscaos

Жыл бұрын

@@ggsj não é fácil, Gil. Não é fácil...

@commentreader9711

Жыл бұрын

India?

Nice creatively product .👍

Шикарная поделка! Лайк однозначно и большое спасибо за ваш труд!

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact

@djon-68

2 жыл бұрын

Отлично сделано и думаешь почему я до такого не додумался.

@alekseyivanov9199

Жыл бұрын

@@djon-68 ну как сделал?

Отличная идея и превосходная реализация. Спасибо за видео.

@user-hh7vi5rb6j

2 жыл бұрын

Поначалу думал что распустит в струну и засунет в принтер. Однако нет. Метод разматывания пластиковой трубы чрезвычайно любопытен

Супер .молодец

Vc é top dás galáticas 🤩🤣. Parabéns, belíssimo trabalho. 🤗🤗🌻🌻🌻🌻🌻🌻🌻

Bisa digunakan untuk tempat bumbu dapur juga ya. 👍👍👍👍

That was unique design from pvc pipe

En Perú, a esto le llamamos, ¡ Que bestia ! ¡ Eres un monstruo ! con cariño. Gracias por la enseñanza.Jehova Dió lo bendiga.

Продолжай делать эти поделки!!!У тебя талант!!!Мы тебя смотрим и восхищаемся!!!❤

Anda luar biasa..🖒

ഇതാ വീണ്ടും നമ്മ മല്ലു അസോസിയേഷൻ വന്നിരിക്കുന്നു സൂർത്തുക്കളെ. ഇത് അഭിമാനം 🥰🥰🥰

@kadeesakadeesu7581

2 жыл бұрын

😀

@Top-One-Maker

2 жыл бұрын

🥰🥰❤️

Отличный ящик и практически из мусора сделан, спасибо за идею!

@sergekonst3941

2 жыл бұрын

Клей такой стоит ну очень недешево, плюс времени на это говно потратишь кучу, только на задрочку наждачкой, плюс трубу найди куски. Короче, когда нехуй делать, и для тех кому на пенсии скучно, это да. Ну и понравилась идея превращения трубы в листы, это да не знал, спасибо.

Very compact and looks light and comfortable

Very interesting to watch.

Awesome creativity👏

I remember wooden boxes were made like this. My grandmother had one Thank you for reminding me of her . I'm going to make this soon

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

@davidwillard7334

2 жыл бұрын

I HAVEN'T ! Seen ! A Wooden Conduit ! Pipe ! Yet !!

@angelbear_og

2 жыл бұрын

@@davidwillard7334 TF? He didn't say anything about wooden pipe. He said a box like this made of wood.

@danielforde-pogson

2 жыл бұрын

What? Starting with a wooden pipe??

@Nauj1017

Жыл бұрын

@@angelbear_og bruh the person who made the video clearly made it out of a pvc pipe, OPs comment then states "i remember wooden boxes were made like this." So the person you responded to is clearly poking fun at OP Because as he said "they were made like this", like how? With a wooden pipe?

hững sáng tác của Sỹ Luân nghe mãi ko phai.. Phúc hát rất hay và ấm áp

I like this video...👍👍

В этом видео мне понравился больше всего клей!

Nice idiya bro 🤗🤗❤️

Sangat kreatif sekali. tangan yang terampil. MANTAPPPPPPP....

Nice... Terima kasih ilmunya.. dan sudah sharing

Отличная идея и хорошее исполне -ние.Увидел бы и не догадался, что самоделка...Голова!,однако.

Incredibly creative! No specialized tools required. Thanks for sharing!

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

Very good your job

C’est génial votre boîte. C’est une excellente idée. Bravo. Je m’abonne à votre chaîne. (Luxembourg)

Hats off to your creativity ❤️❤️❤️

Bravo 👍👍👍👏👏

The best idea ever

Прикольно у меня как раз валяются остатки такой трубы.

Вот, тебе и идея! Как раз искала как же сделать удобное хранение мелочевки, которая нужна всегда под рукой! Спасибо большое за идею! Пошла резать картон!

@kanagarajganesan9103

2 жыл бұрын

Kids store

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

@Sunsetpeople

2 жыл бұрын

А не проще купить?) делать такое геморрой.

@AZLKTeamRussia

2 жыл бұрын

@@Sunsetpeople вот и я про то же. Когда много свободного времени и заняться нечем, то можно, к примеру, на пенсии. Быстрее купить. Время очень ценный ресурс!

I Iike that you used the gas stove and not a blow torch 😂 Keep keeping it simple just like this my brother.. I would love to learn more from you Practical. Simple. Beautiful. 🙏

Merci beaucoup pour la vidéo 📹

I love this ideas 🇮🇶😍😍

Great achievement, congratulations. Unfortunately, PVC obtained from pipes does not remain perfectly flat; over time, it tends to return to its rounded shape (especially if exposed to heat).

@bobnwashington

2 жыл бұрын

I had the problem of pvc holding it’s shape, after cooling down it wouldn’t hold it’s shape. But, dip in cold water or wash cloth, shape is frozen.

@hafeexius

Жыл бұрын

@@bobnwashington thanks for the tip 👍🏻

@simplyed9482

Жыл бұрын

If the material is heated correctly and pressed between surfaces that do not act as a heatsink (like metalic surfaces) The bonds between the chains are so weak that they can be broken when the plastic is heated. _The chains can then move to form a different shape. The weak bonds reform when it is cooled and the thermoplastic material keeps its new shape_ We see the same process when a blacksmith heats a spring coil to make a new part. Simply a lot more heat and pressure to rearrange the bonds.

Engineering skill😁😁😁

I like your video

That's a fancy makeup kit

Su imaginación es sorprendente!!

I love your videos thank you so much❤❤❤❤❤❤❤ dill se

@gopalpatil6636

5 ай бұрын

hi

muy buen vídeo!! excelente. Hasta lo hace ver "fácil". Por muchos vídeos así. gracias por compartir tus conocimientos y experiencias!! saludos desde argentina!

Отличная идея, буду делать себе такие боксы, только побольше! Спасибо тебе добрый человек!!!

Gracias por compartir tan maravilloso proyecto,🙌👏👏👏🇻🇪

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

Osam bhai 👍🏻

@neeljagtap0702

2 жыл бұрын

Tu har video me comment krta he bhai

@neeljagtap0702

2 жыл бұрын

Sayan dalal, samar experiment, Mr dharoniya, and this also

Wow , very nice

Очень круто. Спасибо за полезное видео. У тебя золотые руки.

Good idea

Increíble lo que podemos hacer en casa de manera simple,felicitaciones.

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact

Amazing bro best idea

Kreatif juga bang bagus hasilnya👍

Nice Idea 👌👌💡

@laxman.trijhwani1846

2 жыл бұрын

6y6hù779777777787777777777777

Awesome idea bro

Хорошая задумка 👍

Good job 👍

Woooowww that's a ton of work 💪👷... perfect piece of art 🎨👌👏👏👏👏👍👍👍👍👌👌👌👌👏👏👏👏👏

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact

@mrtruechannel8723

2 жыл бұрын

Tks U!

Totally awesome! What an amazing result from a round pipe. Looks like a really nifty box that could be used for more than tools.

@chrishayes5755

2 жыл бұрын

keep in mind super glue cracks when frozen, it's probably best to use epoxy if the box will be stored in cold weather conditions.

Just Box... But respect it take so much time and effort

Good job I like kreative

This is good for young kids to see something in a different light! Well done! RWB

Bhai maza aaya nice video and big fan also......

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact

Yes only yes amazing ide.

Amazing❤❤❤ m bhi banaunga😏😏😃

What a patience he has!!! This box is awesome 😍

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

@SenTirTv07

2 жыл бұрын

Kreatifitas tiada batas saudaraku.... Salam Sejahtera Dari Lereng Gunung Slamet

@subramanianr7206

2 жыл бұрын

Yes, finishing the edges of the sheets thus made on the sand paper so that the PVC glue can stick with good bonding is going to take a long time and practice; no doubt. I have made boxes using readily available acrylic sheets and the cementing substance is chloroform liquid. For it to spread evenly along the edges or surfaces of two bits by capillary action it requires a finely ground smooth surfaces; now a days laser cutting is available for cheap and the finished product is having a factory product look. De VU2RZA

Отличное видео! Вот уж действительно сделай сам своими руками без токарных, фрезерных и прочих станков.!!!

@user-de3py4yi9o

2 жыл бұрын

Да норм но нужно размер побольше надо сделать

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

@davidwillard7334

2 жыл бұрын

No ! Tools ! Whatsoever ! Anymore !

Класс, у вас руки золотые, МАСТЕР ! ! !

pipa oaralon sotrabat 2 warna dskam putih luar abu abu keren itu aku juga membuat macem macem dari itu aku kerik sesuai gambar dan pola sukses bro

Really creative process with the pvc heating and flattening, never thought of doing that!

One minor improvement: make the top drawer a little bit wider, so it will aline with the lower board plus the extra sheet

@SergiuAndreev

Жыл бұрын

..or just make the bottom drawer shorter and instead of using an extra sheet make the back border of the second drawer higher.

Good job Bhai 💝

مبدع ورائع. تسلم ايديك. (عزمي الشريف ) من الاردن. تحياتي

Pwoliyee❤️🔥

SHOW!!! Muito útil e grande idéia. Parabéns 👏👏👏

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

Making micro plastics for our food and water. Thanks. Your a nice guy.

Молодец!

It's really amazing

Круто! 👏👏👏👍🔥

Make a toolbox, like it...

Excelente inventó gracias por compartir saludos desde México CDMX 😉👍 bendiciones

Kamal ka toolbox h bhai ❤️👍 bas isko galti se bhi girana mat 👍

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact

Идея интересная, но я бы сделал крышку чтоб откидываясь назад она вставала вертикально и ненадо тогда на средний ящик клеить стенку-подставку От нижней петли можно протянуть веревку или резинку чтоб на верхнне ушко накидывалось-оно и доя предотвращения случайного открывания и для перенлски сгодится А сам пластик греть на газовой плиткой некомильфо, есть же строительные фены

@hitaxo3779

2 жыл бұрын

чем клеить? аналог этого клея есть ?

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact

@user-fx8or3oi5e

2 жыл бұрын

@@hitaxo3779 вроде как 405 или из этой серии от хейкен

Juda chiroylik qoyil

Muito bom! Parabéns pelo trabalho.

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

Parabéns pelo seu trabalho ficou perfeito 👏👏

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact!

@selvamaniselvamani-iv7xn

10 ай бұрын

​@@mrtruechannel8723அமேசான் டவுன்லோட்

BRO INVENTIONS IS SUPER

KREN IDE BRLIANNYA BRO TETAP SEMANGAT SUKSES SELALAU

Nice work💯

Tip for removing marker ink. Use a whitboard pen, it last enogh for working time and can be very easy to remove.

Good idea 👍👍💡

The CA glue will actually hold those watch clips onto the plastic and not pull off after a couple of uses??? And it would seem that he's using more than one 4" long piece of 4" PVC pipe. The idea is COOOOL!!! But it really does have to hold up to use to be worth while.

Your art is really very fantastic 👌

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact

Gostei demais. Muito legal I liked it too much. very cool

@mrtruechannel8723

2 жыл бұрын

Hello. Hope we could interact

wonderful !!! amazed me...

Kerennn...👍 Terima kasih, mau coba buat ah...😊🙏🙏

Incredible talent!!!