How To Make A Telecaster Guitar From Scratch
Тәжірибелік нұсқаулар және стиль
I've always wanted to make my own guitar so I finally did. This telecaster build video shows a brief overview on how to make a Telecaster from scratch. I made it from rough cut lumber and gold hardware from StewMac.
⬇️Check out our custom guitar template bundles ⬇️
www.thewoodenhobbyist.com/store/p/electric-guitar-template-bundle
⬆️Make your own guitar from scratch with this⬆️
Making a bass guitar from scratch - kzread.info/dash/bejne/mmyHybd-l5qwpdY.html
Custom barstools for guitar playing or kitchen - kzread.info/dash/bejne/mZuertGvmLW6kdY.html
All my recommended tools from this build are below!
The BEST sandpaper money can buy - amzn.to/3X7sZ6q
Festool Foam Sanding Pad - amzn.to/3X6DEhJ
My go-to drill guide - amzn.to/3CLcO6G
These bits are cleaner than forstner bits - amzn.to/3iAtGGo
The sander I use most - amzn.to/3XJmWoH
My favorite drill drivers - amzn.to/3GDXgTc
If you don't have a track saw like me, try this - amzn.to/3GzW6Z3
My go-to router - amzn.to/3w19C2Q
The highest quality bandsaw blade - amzn.to/3iBDn7s
Sawstop Jobsite Pro - A small table saw to get the job done - amzn.to/3vVk3VT
00:00 Intro
00:23 Milling the body of the guitar
01:41 Milling the maple top
02:28 Glueing the body and top in the vacuum press
02:55 Applying the template
03:07 Shaping the guitar to the template
03:24 Routing out the control panel and pickup pockets
03:29 Final shaping and sanding
03:45 Drilling the string holes and pickup wiring channels
03:57 Routing the neck pocket
04:04 Drilling for string ferrules and auxiliary input
04:13 How to finish a guitar with Rubio Monocoat
04:33 How to make a guitar neck and fret board
05:36 Shape a guitar neck with a router bit
05:53 Shaping a guitar neck with hand tools
06:05 Veneering the headstock
06:31 How to fret a guitar
07:04 The easy way to fit a nut on a guitar
07:19 Adding hardware and soldering pickups
07:38 How to make a guitar inlay with epoxy
07:58 How it sounds and tone test
Tools Used:
Sawstop Jobsite Pro
Laguna 14/12 Bandsaw / Resaw King Blad
Jessem Router Table
Makita Router
Various whiteside router bits and some from bits and bits
Metabo cordless drill set
Porter Cable Drill Press
Jet Benchtop Drum Sander
Oliver Machinery Benchtop Planer
Stanley Bailey No. 5 Plane
Rockler vacuum and Roarockit vacuum press bag
Titebond III
Craftsman Miter Saw
Jorgensen Clamps
Grizzly G0855 Jointer
Generation 4 Fender Noiseless Pickups
Templates from StewMac
Ernie Ball Custom Slinky Strings
Gold Hardware and Gold Frets from StewMac including a Gotoh Bridge
Shinto Rasp from Rockler
Wood used:
African Mahogany for the guitar body
Figured Maple for the guitar top
Bocote for the fret board
#telecaster #guitars #guitarbuilding #woodworking #diyguitar #woodworkingprojects #woodworkingideas
Пікірлер: 112
I am happy and excited every time I see anyone. Built a guitar and played it himself And I like making guitars too.
One of the best guitars T style guitars I've seen. I think a lot more people like a natural finish than the large companies think.
@TheWoodenHobbyist
Жыл бұрын
Much appreciated! And I’d say I agree about the finish. I don’t know why larger companies don’t focus on more natural looking electrics. It honestly would probably drive up costs because most painted guitars are made of panels and not a solid chunk of wood
this video deserves a few million more views
@TheWoodenHobbyist
Жыл бұрын
Thanks a lot! I appreciate it!
It looks and sounds awesome, build more! Lots of builders never go through all the measurements of everything. Maybe you can do that. Looks thin on the entry of video which looks good. Looks thicker latter even near finishing.
@TheWoodenHobbyist
3 ай бұрын
Thanks a lot! It was hard to focus on sharing every detail being it was my first one but I definitely plan on doing a full step-by-step series of one soon!
The Rubio finish was the right choice. Turned out beautiful.
@TheWoodenHobbyist
Жыл бұрын
Thanks! Once it cured I buffed it with paste wax and it bumped the sheen up a little bit
Fantastic work dude! As a budding luthier myself I too felt the shock of “well dang building guitars takes a lot of skill” but you’d never know it by how you presented everything. The guitar looks gorgeous and I loved your optimism in taking your setbacks and turning them into opportunities. Also the risk it for the brisket at the end with the inlay is a great touch. Often times it’s under those same types of circumstances that the most beautiful work is created. Hope you’ll keep building and documenting into the future!
@TheWoodenHobbyist
Жыл бұрын
Much appreciated! Like Bob Ross says…”happy accidents” hahah setbacks are just a chance to get creative. Many more to come, thanks again!
You and Shawn did such a good job!!!!
@TheWoodenHobbyist
Жыл бұрын
Thanks a lot!
BEAUTIFUL 😊
@TheWoodenHobbyist
Ай бұрын
Thank you!
Fantastic video and even better playing technique,Well done !!!
@TheWoodenHobbyist
Ай бұрын
Thank you!
Wow! Nice! I love to see people building their own instruments. Awesome! 😎
@TheWoodenHobbyist
Жыл бұрын
Thanks! And thanks for watching!
O natural da madeira é muito melhor que qualquer tipo de tinta... essa guitarra ficou perfeita.
@TheWoodenHobbyist
2 ай бұрын
acordado! obrigado pelo elogio!
That top turned out sweet. Love the oil finished look.
@TheWoodenHobbyist
8 ай бұрын
Thanks! The finish is still holding strong today
Really beautiful this guitar.. 👍👍🇪🇸🇪🇸
@TheWoodenHobbyist
Жыл бұрын
Thank you!!!
@Raul1971xxx
Жыл бұрын
@@TheWoodenHobbyist My pleasure.. 👍🇪🇸
Beautiful build!
@TheWoodenHobbyist
Жыл бұрын
Thanks a lot!!
Beautiful! Very talented!
@TheWoodenHobbyist
Жыл бұрын
Thank you!
Awesome !! Congrats !!
@TheWoodenHobbyist
10 ай бұрын
Thanks!!
Looks great!!
@TheWoodenHobbyist
Жыл бұрын
Thanks!!!
Stunning Tele! I love the natural finish. New sub!
@TheWoodenHobbyist
2 ай бұрын
Glad you enjoyed it, thanks for watching!
Looks and sounds great.
@TheWoodenHobbyist
2 ай бұрын
Thank you!
OMG, this is awesome. Bro I’m so happy you’re growing and sharing with the world. You’re talented.‼️
@TheWoodenHobbyist
Жыл бұрын
Thanks bro I’m super glad you like it!
Tele looks and sounds amazing. Nice playing too.
@TheWoodenHobbyist
Жыл бұрын
Thanks a lot!
Stunning ❤
@TheWoodenHobbyist
2 ай бұрын
Thanks!
Thats just lovely that is
@TheWoodenHobbyist
10 ай бұрын
Thanks a lot! I have to agree!
This is unreal dude, great job
@TheWoodenHobbyist
8 ай бұрын
Thank you!
Awesome!
@TheWoodenHobbyist
6 ай бұрын
Thank you!
beautiful guitar and playing, hope one day i’ll be able to craft a guitar or play that good
@TheWoodenHobbyist
9 ай бұрын
Thanks a lot! Just pick up a guitar everyday and you’ll get there
I wouldn't guess any of the setbacks judging by the final product, it looks and sounds amazing.
@TheWoodenHobbyist
9 ай бұрын
Thanks a lot! I ended up fine tuning the hardware and she sounds even better now
Good job 👌
@TheWoodenHobbyist
Жыл бұрын
Thank you!
I wish I had the skills to make a guitar. I made a dulcimer from a kit once, but that's about it. My problem is that me and tools don't get along well. I'm not ambitious but tend to use different hands to do different things.
@TheWoodenHobbyist
Жыл бұрын
You have the skills just get out there and do it! Who cares if you mess up here and there!
Cool playing! Guitar too BTW
@TheWoodenHobbyist
Жыл бұрын
Thanks a lot!
Thanks for the video. I didn't see what finish you used on the list of stuff in the description. Could you please specify what you used? You said Rubio Monocoat, but which one and how was it applied / number coats etc. Thanks.
@TheWoodenHobbyist
9 ай бұрын
It’s rubio monocoat pure and I applied it by using a white scotch bright pad. Then wiped the excess away with a paper towel. Rubio monocoat, as the name suggests, only requires one coat if done properly. Thanks for watching!
Nice
@TheWoodenHobbyist
Жыл бұрын
Thanks!
Nice build! Why would you radius the fretboard first and glue it later?
@TheWoodenHobbyist
9 ай бұрын
Thanks! I go back and forth now. I made a jig for a bass build where a router does the radius work and it needs to be glued to the neck. I guess means rely on method
Hope you earn that reputation to gain hungry customer for top dollar quality guitars amazing work i will pay top dollar without being there in person i just go by the details a person gives out and from there im not taking my chances because im confident enough what that person is doing and saying lol
@TheWoodenHobbyist
6 ай бұрын
Much appreciated ! I wasn’t confident until I finished it lol
Fantastic build. I recently also made my first acoustic guitar using only pine wood and I am considering an electric guitar also.
@TheWoodenHobbyist
Жыл бұрын
I bet it sounds great! I heard pine is actually a great tone wood, especially for amps
@woodnailhammer
Жыл бұрын
Check it out on my channel. kzread.info/dash/bejne/qJ6CuKODiN3NZqQ.html
@TheWoodenHobbyist
Жыл бұрын
Awesome I’m doing it now!
What is the radius of milling machines? For the neck
@TheWoodenHobbyist
24 күн бұрын
Telecasters are subjectively best with a radius of 7.5 to 9.5 inches
Very nice guitar. Beautiful maple. On my glossy screen, your finish looks glossy too of course, but is it really a gloss finish? As far as I know, Rubio is very matt. Why did you make the trussrod nut accessible on the side of the headstock?
@TheWoodenHobbyist
7 ай бұрын
It’s definitely matte! I plan on adding the new Rubio sheen enhancer to it though. Since it was my first guitar build, I made a lot of mistakes on where I put things and how I tackled problems. One of these things was the truss accessibility. I would definitely do it different next time.
@twelthstring
7 ай бұрын
Lots of levels to choose from. Why not try a non pickguard guitar, using bindings or bindings around a contoured body.Good luck.@@TheWoodenHobbyist
@TheWoodenHobbyist
7 ай бұрын
I’m forsure going to build some more guitars and I definitely plan on them getting more intense each time!
Nice guitar - good job! . But intonation was pretty rough - you might want to invest in a tuner.
@TheWoodenHobbyist
8 ай бұрын
Yeah it took a while but it’s figured out. Used a tuner app on my phone
the nut slot on my new tele neck is way too narrow, about 1mm. I’m thinking to wrap up my fretboard radius gauge with sand paper to widen the gap, a sound plan to you or theres other easier/safer way to do this please? many thanks
@TheWoodenHobbyist
6 ай бұрын
I think that would work just fine, taking off little bits at a time and check fit. A sharp chisel could do the trick as well.
Which router bit did you use? Do you have a link? I would love to buy that one.
@TheWoodenHobbyist
10 ай бұрын
It’s this whiteside bit! amzn.to/3Lp8DBB
This looks real good. I see the Fender noiseless pickups and tried to find what sort of switch you used. If it is a 4-Way switch, please do tell where you got the wiring diagram for it.
@TheWoodenHobbyist
Жыл бұрын
Thanks! It’s a 3 way switch I bought on StewMac and the wiring diagram came with the pickups!
@TheDiaboliq666
Жыл бұрын
@@TheWoodenHobbyist Yeh, got the 3-Way and it's working. Tried to put a 4-Way switch and there is no valid wiring diagram for that with GEN 4 or the Ultra Noiseless. If you ever decide you want a 4-Way switch there, first try to find a wiring diagram, 'cos not even Fender Support could provide one ;) Keep it going mate. That is one good looking guitar. Would love to see you do anotherone.
@TheWoodenHobbyist
Жыл бұрын
I’ve been ordering the pieces for another one, maybe I’ll get a four way and tinker with the wiring until I get it right. Thanks for the compliment!
@TheDiaboliq666
Жыл бұрын
@@TheWoodenHobbyist Will be watching out for that one mate. I still have that 4-Way stowed away in a cabinet somewhere :D
@TheWoodenHobbyist
Жыл бұрын
Hell yeah!
Just Beautiful. Man you did a fantastic job.
@TheWoodenHobbyist
Жыл бұрын
Thanks a lot! She stills plays well!
But where did the plastic body template come from?
@TheWoodenHobbyist
9 ай бұрын
I got it from stewmac.com I also make them now too! On my website
How many diff tools are necessary for this?
@TheWoodenHobbyist
Жыл бұрын
It really depends on how you plan on building it! There are people who just use basic hand tools, sand paper, elbow grease and take a long time to build. Others who are more impatient, like myself, choose the multiple power tools option. Are you looking for a specific workaround at a certain part of the build?
Great! How thick is the body?
@TheWoodenHobbyist
10 ай бұрын
Thanks! Just a little over an inch and a half
@moosey62
10 ай бұрын
Damn it, I knew it could be done. You've given me great hope for some stock rosewood I have. Sounds and looks amazing. Congrats mate.
@TheWoodenHobbyist
10 ай бұрын
Haha yes it can! Just have to be careful with the electronics cavities
Where ist the truss rod?
@TheWoodenHobbyist
11 ай бұрын
Hidden in the neck. The video shows how I installed it
Nice guitar dude, but remove the hardware before finishing, never shield the guitar before finishing and routing the cavities before final shaping is easier
@TheWoodenHobbyist
10 ай бұрын
Thanks for the compliment. Can you explain why? I’m curious because the guitar works well but I’m open to doing better!
@ovniufo6777
10 ай бұрын
@@TheWoodenHobbyist removing string ferrules is better for applying the fininsh, and if you put some finish on the shielding it won't work properly, and you need to shield once again. For the cavities it's better to have a good stability so a nice wood block is more stable than bench cookies
@TheWoodenHobbyist
10 ай бұрын
@ovniufo6777 I understand the shielding aspect but I didn’t have any trouble with the bench cookies
@poisonousfrog5526
10 ай бұрын
Mmm cookies
@TheWoodenHobbyist
10 ай бұрын
Gotta love some cookies
Bending wood to make a guitar shaped leg for a desk with the most beautiful book matched veneered cabinet: kzread.info/dash/bejne/mKKLlLexZqiTZag.html
How To Make A Bass Guitar From Scratch - kzread.info/dash/bejne/mmyHybd-l5qwpdY.html Woodworking Playlist You Need To See - kzread.info/head/PLtLSILMml_OiaNkXvH_M4MwWwP3EmZ_h0
Its a very nice build, but you would need to find a real sucker to pay 10 grand for that.
@TheWoodenHobbyist
7 ай бұрын
Thanks! And yes, you’re right lol It’s just a title change to check on what gets more engagement. I never actually planned to sell it. I will say, back in my younger days I worked at Guitar Center and you’d be amazed what some people would spend on guitars.