How to Make A Simple And Easy Arduino Robot For Science Project
Тәжірибелік нұсқаулар және стиль
Hello guys, In this tutorial I am going to show you how to make a very simple and easy Arduino Robot for your science project. So let's get started :)
Please subscribe ❤️ and turn on notifications! 🔔 bit.ly/2WlyA8Y
Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
-------------------------------------------------------------------
Parts Required
(Baggood.in)
1) Arduino Uno - bit.ly/2Fz8M4q
2) Arduino Motor Driver Shield - bit.ly/2VWaYsn
3) TT Gear Motor (2x) - bit.ly/2Rtg2G9
4) Rubber Wheels(2x) - bit.ly/32I5fZG
5) Servo Motor - bit.ly/2Soq7E4
6) Ultrasonic Sensor - bit.ly/2RzebL7
7) 18650 Li-ion Battery - (From PowerBank )
8) Battery Holder - bit.ly/2sulLwu
9) Male and Female Jumper - bit.ly/2su6mfM
10) DC Power Switch - bit.ly/2FtyEzs
11) Acrylic Sheet - (Local Store)
(Amazon.in)
1) Arduino Uno - amzn.to/35flEXS
2) Motor Driver Shield - amzn.to/30Z9ijj
3) TT Gear Motor and wheels set - amzn.to/31WSD0Z
4) Servo Motor - amzn.to/2IAigNH
5) Ultrasonic Sensor - amzn.to/33fwrQa
6) 18650 Li-on Battery (2x) - bit.ly/2CZabQ7
7) 18650 Battery Holder - amzn.to/33iY4b3
8) Male and Female Jumper wire - amzn.to/2MmRjOE
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - bit.ly/2FtyEzs
[Flyrobo.in]
Arduino Uno: bit.ly/2m8HZnL
Motor Driver Shield: bit.ly/2mvO7XL
Wheels: bit.ly/2kxPeFF
TT Gear Motor: bit.ly/2m4fMid
servo motor: bit.ly/2MIdoaB
Ultrasonic Sensor: bit.ly/2McGLm1
Male and Female Jumper wire: bit.ly/2mu0aVo
--------------------------------------
Circuit Diagram - bit.ly/3fWsKFH
Code - bit.ly/3jCOWXE
--------------------------------------
More Arduino Related Project :
1) Arduino Human Following Robot - • How To Make Arduino Hu...
2) Arduino All-in-one Robot - • Arduino All-in-One Robot
3) Arduino Metal Detector Robot - • How To Make DIY Arduin...
4) Arduino Obstacle Avoidance Robot - • How To Make A DIY Ardu...
5) Arduino Voice Control Robot - • How To Make DIY Arduin...
6) Arduino Gesture Control Robot - • How To Make DIY Arduin...
--------------------------------------------------------------------------------------------
Contact me
Facebook: / surajit.majumder.165
Instructables: www.instructables.com/member/...
twitter: / diybuilder1
Instagram: / diy.builder
------------------------------------------------------------
🎧 Background Music
Track: Jazzy - LiQWYD [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Jazzy - LiQWYD | Free ...
Free Download / Stream: alplus.io/jazzy
Track: Perspective - IVAAVI [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Perspective - IVAAVI |...
Free Download / Stream: alplus.io/Perspective
-------------------------------------------------------------
#ArduinoProject #ArduinoRobot #ArduinoCar
Пікірлер: 974
You are ranking number 1 for the search term: building arduino robot. Well done!
AMAZING PROJECT KEEP IT UP...ITS VERY GOOD FOR SCIENCE FAIRS AND INNOVATIONS CLUB....REALLY I APPRECIATE THIS KIND OF INNOVATIVE IDEA ....PLZ MAKE SUCH ROBO CARS THANK YOU....
@Mikehydra
2 жыл бұрын
Please tell me...... how to attach the switch?
@yagyasingh765
2 жыл бұрын
Can we interact with this robot
@Nikkishofficial
Жыл бұрын
@@Mikehydra just Attach it in the positive wire. Of the Battery holder
@majumathew2433
10 ай бұрын
How
All videos are excellent . I really enjoy to watch till end
Nice preoject bro. The background done with LEDs are super dope.
@ashishgupta-hs4qw
4 жыл бұрын
Can I run this robot with the simple 9 volt battery
@laksananthanandarajah1477
Жыл бұрын
@@ashishgupta-hs4qw you can
I love it! I could probably code this. To those who cannot I recommend O'Reilly Head First Java to start. This is a book for all ages. You can read about 100 pages in and understand enough Object Orientated stuff to go through the libraries. Also, there are free ebooks on wikipedia in the computers category on languages like C(which would help in arduino C), C#, and even Robotics. and of course arduino offers a starter kit with a book that goes through the basics of electrical workings to I think about 10 projects. I hope this helps anyone out there I do understand a lot of young kids watch these kinds of videos as I did too.
@adventure518
Жыл бұрын
Ok
@adventure518
Жыл бұрын
Thank you
@adventure518
Жыл бұрын
Don't you have a book for c++
@Bhaviya2345
9 ай бұрын
I uploaded the code and also fixed everything according to the diagram still my robot is not working Can you help me with that
if i had my own space, i'd make stuff like this. i can totally see this being adaptable for a remote control platform, with a camera mount.
I'm still lost just like this robot
@destroy2616
3 жыл бұрын
XD
@bababoeey3501
3 жыл бұрын
@City Bass didn't know lost meant poor
@samueljairc7597
2 жыл бұрын
@City Bass Yes but he's saying he didn't know that not that he doesn't know that
@user-qm1su4jd5b
2 жыл бұрын
Masha Allah fat
@sunitha2263
2 жыл бұрын
Yaaaaa
Congratulations on 100k sub!
Excellent project 👍
Love it❤️
WOW! you really are the DIY Builder 🏆🏆🏆🏆🏆🏆🏆🏆
BEAUTIFUL !!!!!!!! Gracias !!!!!!!!
U did not show how u installed battery at the back😢
You have been selected in most underated channels
@tanishasanghvi3005
3 жыл бұрын
What do u mean by that
@summerguy6
3 жыл бұрын
@@tanishasanghvi3005 underated means something really good which often doesn't get recognized
@niteshthamilselwan851
3 жыл бұрын
Ooooo
make wall-e using the gear wheels you used a while back and use the ultrasonic sensor like this one
thanks for the list of materials and their links and this video, there is one 11-12 days for my science exhibition project in school. I can also use it as a moon/mars rover
@conkkids7394
11 ай бұрын
Did you make it? I haven’t seen anyone make it!
hello do you have the design for 3D printer? it would be very useful
That’s very dope. I have noticed you glued the DC power switch to the battery holder, and I can see some wires.. could you please show the wiring for that part, I think you skipped that step in the video. :)
@mahibala476
9 ай бұрын
hey you just because of that you cant tel him the project is dope as if you can do every thing he di be nice next time😡
@mahibala476
9 ай бұрын
ok mariasantos?😤
@TRAZExYT
9 ай бұрын
@@mahibala476 wym?
@ashasnair3441
8 ай бұрын
BBr tf wrong with you? 💀
Hey man! It's a wonderful video:-)
nice work my friend
Thank you for this tutorial. I've built it and it works wonderfully!
@DIYBuilder
4 жыл бұрын
Great to hear!
@ramrainatekar7755
4 жыл бұрын
Can u share me the. Code
@yourmusichere3468
2 жыл бұрын
Plz tell me how to install the switch in robot plz
@demoniccrafttamil7203
2 жыл бұрын
How to add lib
@UnknownSend3r
Жыл бұрын
@@DIYBuilder The motor has pieces on either side to attach wheels to, so did you cut off one part so you can glue it to the battery pack.
I did that robot and I have some recommendations for you. First the robot is unestable so is difficult to move. Second you need have that wheels because if you use another ones it gonna fall Finally you need that acrylic piece
@shezjee3471
3 жыл бұрын
why we need that acrylic piece
@veenaomg3300
6 ай бұрын
Can you please send the code that you used the one I have isn't working
For some reason it only drives one wheel forward... both wheels move when it adjusts course but when it wants to go straight forward again it just runs in circles... any ideas?
I hope I could make it. But your progect is great 💯💯💯
Thanks sir. I will make this in my science Exhibition.
Loooks like an obstacle avoiding car with 2 wheels
What steps would you have to make to modify this robot and allow it to receive voice control inputs?
Yes , I made it tooo , thank u mr
Nice 👍 I,am from Azerbaijan I love your channel
@DIYBuilder
4 жыл бұрын
Thanks
@abdulbakibarin9070
3 жыл бұрын
@@DIYBuilder what is the on / off key on the pi bed, please write
still hoping you make wall-e !!!
@swarnavamazumder8830
4 жыл бұрын
True
@Mippi12
3 жыл бұрын
I will make , just need some time.
@bye4619
3 жыл бұрын
@@Mippi12 good luck 👍
How you got pins in +5gnd and AO-5?? My motor driver don't have those pins. please tell fast
helped me for my school project
Can anyone help I tried making this for science exbition using power bank etc.. but it's servo motor is working but the it is not moving
@jeminiabraham9575
4 жыл бұрын
Open servo and give supply to the motors
@renumadhu5607
4 жыл бұрын
@Are created I made the obstacle avoiding car by the same channel Anyway thanks
What are you using to add weight to the rear for balance and to keep it leaning back. Is that another 18650?
@3pdalra7man7elmy8
3 жыл бұрын
خ
@GustavPeru
Жыл бұрын
I noticed that too, it looks like another battery
Your idea is cool👍👌
thanks for this video we are working from this at our class Szily Kálmán, Hungary
Bro,, I am going to make a walking, speaking robot... But I am failing in my programming at Walking part..... Do you know creating about aurdiono programming?
@cassandra_5145
3 жыл бұрын
Search it up on google, search up as many as you can, then compare those to yours, you will know where did u failed.
i recieved 1st rank in inter school competition U r awesome
@charan563
4 жыл бұрын
how
I like it. I am working on something similar. Automation using sonic sensors. Great video!
@DIYBuilder
7 ай бұрын
That's awesome!
hello bro in this project which wire did u solder in the gear motor?
Can you control this via Bluetooth with a phone or PS4 controller? I've seen that you can add a Bluetooth module to Arduino Uno but where would I find the code and "how to" in order to make it remote controlled? Thank you!
@Mikehydra
2 жыл бұрын
How to attach the switch to turn it on?
I’m am new to this and have never touched a Robot piece ever lol. But I wanna get started. Can someone tell me what all these parts do.
@Zaynersyy
3 жыл бұрын
Go study electrical engineering maybe? I don't know too
AWESOME 👌🏻
ty for sharing this info
Amazing project, sir
@DIYBuilder
4 жыл бұрын
Thanks
Bro plz show the programming part man it's almost impossible to use it without program
@DIYBuilder
4 жыл бұрын
I have updated the links
@jayeshchavan3103
4 жыл бұрын
Can you tell me any three uses please
@jayeshchavan3103
4 жыл бұрын
@@DIYBuilder please can you tell me any three uses please
@mr.bangladeshihacker7698
4 жыл бұрын
@@DIYBuilder give me the code
@AugustTheStag
4 жыл бұрын
@@jayeshchavan3103 why do you need to know 3 uses? Leave the guy alone
بارك الله فيك فركة حلوة احسنت👍👍👍
THX for my homework
Sir would you please help. I bought everything mentioned In the video and connected all the connections you showed in the video but somehow the TT gear motors are not working although they work fine when connected separately with a battery. All other components seem fine, the servo is rotating and everything. If it helps I uploaded the code to arduino before connecting everything. Also I am using 4 AA 1.5 V batteries.
@lakshaykapoor1591
4 жыл бұрын
Arduino move with 5v battery use a battery not cell
@hamayunkhan1754
4 жыл бұрын
@@lakshaykapoor1591 thank you for your suggestion, I will try to use a higher voltage battery perhaps a 9V battery or two 3.7 V batteries
@ev.9324
3 жыл бұрын
@@hamayunkhan1754 use 9v. The arduino uses 5v but use 9v. It works :D
@oceanpark_5211
2 жыл бұрын
@@hamayunkhan1754 did it work?
Fue muy bueno tu proyecto, pero ¿no compartiste el código fuente?
@TopNeeds123
8 ай бұрын
In description
Wow I like your robot
Super arduino project 👌
Hi , please I have a question , I'm new in this wonderful field , I already learned C++ language and I'm now learning python language , is it enough to be able to build an Arduino robot ? And thank you .
@angeldust_4518
2 жыл бұрын
yes it is dw about it,,even just c++ is enough
@salmasalma2483
2 жыл бұрын
@@angeldust_4518 ok thank you !
@Mikehydra
2 жыл бұрын
How to attach the switch to turn it on?
*Bro its important* I have science exhibition 14 December, and I need to make this bro.. tell me that; Will it work for sure? Good as 9th grade project? I don't want to waste money! Please reply so that I can order parts
@kyanlangestraat7924
4 жыл бұрын
it works just made it
@utpalm9453
4 жыл бұрын
Which level science exhibition?
@utpalm9453
4 жыл бұрын
@@caeksafar i asked... which level.. like nationals, regionals or school .. i didnt ask grade
@mohanacharya4936
4 жыл бұрын
hi bro i am the channel holders brother this video is fake
@yashwanthnaik893
4 жыл бұрын
I'm also 9th grade
My teacher and i like very interesting
Hi, I bought all the parts and everything, did all the wiring correctly but for some reason its not working. The servo motor only moves and the motor driver shield powers on, makes a noise and keeps reconnecting. I’m also using a 9V battery. I would appreciate it a ton if someone could help as to why it’s not working for me (please reply asap). Thank you Edit: I fixed it. I just attached five 1.5V batteries with a switch and it worked. Seems like it was an overdose of voltage before. Btw, you should update the code cuz in the video it’s different as you commented out the other 2 motors.
Hello sir When you plug the USB in do you have to download anything Pls reply Saving money from eight months want to make parents proud
@fleshsoup627
4 жыл бұрын
not your parents but I’m proud of you :)
@johnmaverickclemente730
3 жыл бұрын
me too
"Please tell me the app to access the code."
U making tutorial is googd😁😁🤗🤗🤗🤗
U could have used mpu 6050 accelerometer with gyro to balance the robot
Here is some simple code to program your robot. // Define motor pins const int leftMotorPin1 = 2; const int leftMotorPin2 = 3; const int rightMotorPin1 = 4; const int rightMotorPin2 = 5; void setup() { // Set motor pins as outputs pinMode(leftMotorPin1, OUTPUT); pinMode(leftMotorPin2, OUTPUT); pinMode(rightMotorPin1, OUTPUT); pinMode(rightMotorPin2, OUTPUT); } void loop() { // Move forward moveForward(); delay(2000); // Move forward for 2 seconds // Move backward moveBackward(); delay(2000); // Move backward for 2 seconds // Turn left turnLeft(); delay(1000); // Turn left for 1 second // Turn right turnRight(); delay(1000); // Turn right for 1 second } void moveForward() { digitalWrite(leftMotorPin1, HIGH); digitalWrite(leftMotorPin2, LOW); digitalWrite(rightMotorPin1, HIGH); digitalWrite(rightMotorPin2, LOW); } void moveBackward() { digitalWrite(leftMotorPin1, LOW); digitalWrite(leftMotorPin2, HIGH); digitalWrite(rightMotorPin1, LOW); digitalWrite(rightMotorPin2, HIGH); } void turnLeft() { digitalWrite(leftMotorPin1, LOW); digitalWrite(leftMotorPin2, HIGH); digitalWrite(rightMotorPin1, HIGH); digitalWrite(rightMotorPin2, LOW); } void turnRight() { digitalWrite(leftMotorPin1, HIGH); digitalWrite(leftMotorPin2, LOW); digitalWrite(rightMotorPin1, LOW); digitalWrite(rightMotorPin2, HIGH); }
@arneskrabana2435
2 ай бұрын
Thank you very much bro🎉
@reatives5325
Ай бұрын
@@arneskrabana2435bro really this code is work ??
@reatives5325
Ай бұрын
Bro can trust this code because we do this project ,
A king request for you. Could you please share me the program or code for doing this project.
@hillalmackeen9079
3 жыл бұрын
It is in the description
Wow it is very amazing
Im acctually using different wheels and body but the electronics in there i have them.
Bro can we first upload the code to the board .if the code is uploaded without error than can we attach the motor,servo,ultrasonic sensor. Bro saa fast please
@dylanjayabahu2878
3 жыл бұрын
I think that you can, but you may need to make some modifications if you are not exactly following the tutorial. If u are using a servo motor or something, you will need to change that. If you are doing exactly what the video is doing that yes, you should be able to upload the code first.
Brother can u make some thing different and difficult
@DIYBuilder
4 жыл бұрын
tell me your idea
@aryanbista747
4 жыл бұрын
@@DIYBuilder can you add something like a vacuum cleaner or anything that would make the robot useful
@aryanbista747
4 жыл бұрын
@@muhammadalvi1514 does it work?
Hi.....I ordered all the parts from the links u shared but after connecting battery to motorshield, nothing else is getting powered on
I have a query, for 2 motors also, you needed motor driver, could it be made without motor driver?
Arduino: 1.8.12 (Windows 10), Board: "Arduino Uno" Sketch uses 3908 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 87 bytes (4%) of dynamic memory, leaving 1961 bytes for local variables. Maximum is 2048 bytes. An error occurred while uploading the sketch This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. -Thats what shows everytime i upload it.. can someone help me? \
@sujankgowda1119
2 жыл бұрын
Go to new and upload a blank file then try..
@demoniccrafttamil7203
2 жыл бұрын
@@sujankgowda1119 bro how to install lib
@helo6397
Жыл бұрын
Really late, but try changing the port. It worked for me
Thanks alot I mean alot. The code works 100% fine and the circuit diagram is also clean easy to understand and the video itself is a great thing if you want to make an Obstacle avoiding car. I can assure you who ever is reading this comment the video is absolutely true and mine worked great. But still after all of this Im still sad that you are not active anymore as you havent uploaded for few months. Hope you again start uploading. 😁😁 Edit: Hey I saw you today that you liked my comment that means you are active, and that means that you will upload videos now, Im so happy. I have a request, if you upload any video (I hope so please), please react to my comment, Its a request and I will greatly appreciate if you do that! If there is an problem please let me know by replying this comment, thank you for every video.🙂
@Fastyy_Boy
Ай бұрын
hey please see the edited comment @DIY Builder
@kunumohapatra2781
Ай бұрын
I think you should react to his comment in your video
@sufiatabassum4591
Ай бұрын
Hey can you please help me I am making this robot. For the 1st time everything was fine but the motor did not work after that I opened everything and made it again but then suddenly smoke coming out from the battery holders or the switch and the wires melted Please help@@Fastyy_Boy
@sufiatabassum4591
Ай бұрын
And please tell me if it is necessary to use green and yellow wires for the motor?
@sufiatabassum4591
Ай бұрын
Please reply fast I have to submit it by Tuesday 😢 @Fastty_Boy
Can you please make a robot only using: an arduino uno, jumper wires, 2 servo motors with any kind of horns, a SR04, 2 wheels, an on off switch, and a battery pack?
Cool !!!!👏👏👏
The next will be portal gun
@tr_playzzff8493
Ай бұрын
😂
Not new same function as old obstackle avoiding car
If there is a obstacle at bottom then it will not detect right?
Thank you bro
Really helpful...thanks a lot
@DIYBuilder
4 жыл бұрын
Thanks
I am going to try and make this robot. Can you please tell me what I can use instead of acrylic sheet??
Wow🌟♥️
I have a problem whit the AF_Motor library because this library was updated and now it is called Adafruit Motorshield v2 but I don't know how to include it in the code. could you help me?
Hello form Ecuador, thank for you work!!!! I speak spanish but i know a little english... I need you help me... please... When I connect the energy via the Aduino UNO card everything works fine ... but when power the energy through the "Motor Shield L293d" card at 9 volts, only this card is turned on but not the arduino UNO card ... and I don't forget to take out the jumper. What is happening ... how do I correct it?
@altreedy1649
3 жыл бұрын
Hello yes the same is happening to me as well you have already solved the problem then also me please..
Sir will the yellow tires you used in earlier videos will work because I'm not getting the exact tires u used or will it affect the movement of the robot
@lakshaykapoor1591
4 жыл бұрын
Yes because this robot is for light use and this is the link of light tyres thank me later ;) VEEROBOT Red BO Motor Wheels www.amazon.in/dp/B06XYHPMQN/ref=cm_sw_r_cp_apa_i_qQZ8Db72RRD8S
Excellent videos bro
Honestly worth to watch ur videos but please do explain the logic why we r using these parts and suggest alternatives for these parts, and keeping going u r doing good job
@DIYBuilder
4 жыл бұрын
Bro soon i will start voice over videos where i will explain every details
@MarierNicoleAAbejo
Жыл бұрын
@@DIYBuilder Whats the use of that robot sir?
Super tutorial. I got it working. I had to get the header pins soldered by my mobile phone repair man. I am extremely bad at soldering. But its a neat bot with no loose wires. Thanks!
@UnknownSend3r
Жыл бұрын
The motor has pieces on either side to attach wheels to, so did you cut off one part so you can glue it to the battery pack.
@alexfernandesportrai
Жыл бұрын
@@UnknownSend3r if you mean shaft. I used a single shaft motor.
Bro u make it amazing😎 but please how to compile and download necessary library iam beginner 😅 , and now this was before 4 years , i miss those old days
Can we use Arduino Uno r3 atmega328p instead of atmega16u2
Hey, can I do it without the driver and does it work with aa batteries
Great video! thanks!
@DIYBuilder
3 жыл бұрын
Glad you liked it!
Wow i love it
Awesome you r perfect👍👍👍👍
@DIYBuilder
4 жыл бұрын
thanks
Good job sir. Btw can you hlp me pls. I need to this source code. Thanks alot
what thing you have used to turn the robot?
hi bro amazing video i make it for my science project bro
Thanks DIY Builder you help very much😃😄
@DIYBuilder
Жыл бұрын
Most Welcome
Wonderful Robot car bro
Thank you sir
Hey if I connected two ir sensors and upload code of human following robot, will it work?
I build this robot and it works
Bro I have a question what is that in the TT motor the wire you stick in that from where. To bring that and all the wires like that please help me and if you can please send me the link of it I am requesting you please bro please