Good news!! I have found the plans! I will begin sending copies to all who have requested. This will take some time because there are Lots of back requests. Please be patient. I am only one person. Should you not get a copy in the next couple of weeks, please send me a note. Who knew this would be so popular? :-)

@TheArdhe

4 жыл бұрын

Could send the plan to ardhi.trimahindra@gmail.com? Thank you

@jefriyanto3076

4 жыл бұрын

Send the plan to my email juariyahriyanto@gmail.com , thank you

@michalg3449

4 жыл бұрын

Hi pliz send plans to me goc708@gmail.com

@RangerTTDark

4 жыл бұрын

are you still sending out plans and if so could i get dem aswell on kickert@hotmail.com Thank you =)

@DolananeBocah

4 жыл бұрын

Please send the plan to izanmoubarok7@gmail.com

Nicely done. I know this is old but it is a great example for those that need an alternative to fiberglass hulls. Saved to favorites!

Dude! thanks for passing along this knowledge. Ive been looking for a new hobby and your easy instructions made me want to try to build some cool RC boats. THANKS

@circuitfxr1

9 жыл бұрын

Glad I could inspire you! Please post your build so we can see it.

That hull looks perfect for a small fishing boat build

I have to say that you did a great job here. The boat looks amazing. Maybe you made it look a bit too easy though? You defo know your hobby. Great to watch thanks.

Very nice ! Lots of labor and a real nice boat. Did not know about this type of construction, it certainly gives me some ideas. Thanks for posting. Heck of a job. Looking forward to seeing it on the water.

Seriously amazing build fit and finish my god, looks about 5x the price to build or more!! Never been huge into boats but this changed my mind!!

Great job! After building a lot of planes from Depron with fuselage, not only profile ones, I'm beginning with boats and Depron is a real nice stuff, lightweight, more durable than most other foams and it takes no water what makes it perfect for seaplanes and even boats ;)

Not only a very good builder, but also a very helpfull person. Nice from you to send the plan to so many persons. Again, very nice boat you have builded. Mine it is ugly as hell but is doing the job :) (bait boat).

Very impressive! This video goes in my favourites for future reference.

Great simplistic post 100% recommended

Thank you Francisco. She did turn out pretty nice. huh? I have used a really good sealing paint and applied many coats. I did use white glue thinned with water to apply to the foam edges. It gave a hard surface that sanded really well to give a smooth texture to the otherwise rough edge of the cut foam board. Going to check your tutorial now. :-)

Master! Congratulations my friend, you did an awesome job there. I never thought it was made of foam. greetings from Mexico. I like modelism, but ia haven´t made any interesting yet.

If you add water to gorrilla glue you can foam fill bulkheads. Extra strength too. Great vid,

Well done and really a nice boat! Also your documentation of the building process is great! I enjoyed to watch it :-) Best wishes, Holger from Subwaterfilm

@circuitfxr1

9 жыл бұрын

Subwaterfilm Thank you. I enjoy looking at your site also. Many wonderful models there.

Thank you for the plans i will send you a picture when it is finish

please send plans .this is my first build and it looks fantastic massive thanks

OUTSTANDING

fantastic and a lot of patience I hope to do my- brazil

Good job!

Matt, Thanks for building the model and sharing it with us.What type of filler did you use?

@circuitfxr1

10 жыл бұрын

I used regular wood filler. Nothing special.

great looking boat ,where did you get the plans from.

sweet... thumbs up

Wow!What a boat you've made.did you made it all by your self it is very cool.I wish that i have one

@circuitfxr1

9 жыл бұрын

Yes...all was made by me alone. Thank you for the nice comments. You can make one too!

I love your boat

Beautiful

what type of filler did you used on the foam board? and what's the thickness of the foam board ?

Where do you purchase the foam material for building like this? Great upload. Cheers

Matthew Autenrieb if by chance still have the plans, I’d love a copy of them! Many thanks!

Hi, what is that stuff you used to cover the bottom of the hull? Thanks

Hey Mr. Autenrieb, I would love a copy of the boat plan as well. Thank you for your post.

Sorry for bothering you... But what diameter foam board did you use? Thanks and subscribed!

oh my god... awesome......

matthew what glue you put on the boat

Hi Matthew just watched videos fantastic, i am just getting in to boat modeling and i know this video is a few years old but do you know were i could get the plans from for it many thanks Paul .

@circuitfxr1

4 жыл бұрын

send me your e-mail and I will send you the plans.

Espectacular muy bien 😃👍👍

@jorgenelsonfelix52

6 жыл бұрын

Muy lindo trabajo Le mando un saludo muy cordial desde Buenos Aires Argentina 😃👍👍

Hey Matthew.... Excellent work..... Can you provide link for the downloads???

Awesome job!! what filler did you use?

@circuitfxr1

9 жыл бұрын

I used a standard wood filler made by Elmers.

Ruairidaly Daly... I used 5mm foam display board with paper on both sides. Thanks for the question and for subscribing.

Mathew, Loved the detailed video and the Who-Doggy sailing. I'd like to make the model and will do if you can send me the plans. Also, what materials are need to make her RC capable. Thanks, Geoff

@circuitfxr1

4 жыл бұрын

You will need a transmiter, receiver, ESC, steering servo, a prop shaft, coupler, propeller, rudder. Need an e-mail to send the plans to.

hey Matthew nice work can you upload the plan on google or one drive

Nice.

Hi Matthew. Is it still possible to obtain a copy of the boat plans? Thank you.

Salmon...Plans have been sent. Good luck with your build.

@myatthulin2025

9 жыл бұрын

DEAR Matthew Autenrieb PLEASE GIVE ME RC BOAT PLAN. I WANT TO TRY (RC BOAT BUILDING).

@myatthulin2025

9 жыл бұрын

DEAR Matthew Autenrieb PLEASE GIVE ME RC BOAT PLAN. I WANT TO TRY (RC BOAT BUILDING). MY EMAILI IS PHOEPYING@GMAIL.COM THANKS AND BESTREGARDS MYAT THU LIN

@circuitfxr1

9 жыл бұрын

Stone Cold plan sent

What type of foam is this ?

Nearly finish how do you seal the hull before priming

@circuitfxr1

9 жыл бұрын

There are many ways to seal the hull. I used a spray on clear polyurethane paint. You can also use foam safe epoxy and some people like to use a slurry of white glue thinned with water. I find that spray on sealers are the easiest to use and give a good smooth coating. Always test your sealers and paints on a scrap piece of foam board before applying to your hull. Paints with a petroleum base will most likely eat the foam. I left the paper on my foam board and only needed to protect the exposed foam on the edges. The spray on poly works well, but the thinned white glue could be used for sealing the edges only. The paper protects the foam from most paints and will accept primer and finish coat directly. Applying the paint to the paper will raise the pulp and I recommend sanding with 400-600 grit sandpaper between coats to get a smooth finish. Remember to allow time for the sealer to dry completely before sanding. Hope this helps.

How did you make it so shaft gland won't leak?

@circuitfxr1

4 жыл бұрын

I used epoxy to seal the stuffing tube and I applied grease to the prop shaft before inserting it into the stuffing tube. Thanks for the question Toby

VERY GOOD

Its a nice work i am 14 yrs old from philippines and i want to make a boat i have made one know i dont know if it will float hahaahah

awesome, loooks 1000 buck boat

@circuitfxr1

9 жыл бұрын

Thank you. Please check my other videos for other projects as well.

Hi there was hoping to get the plans for the RC Boat here but also was curious what you used to seal the bottom of the boat and make it nice and glossy :)

@Taio1942

9 жыл бұрын

Derr Email is Taio06@yahoo.com

@circuitfxr1

9 жыл бұрын

I used a clear polyurethane spray paint. It is made by Plastidip. This is the same material that is used to form rubber like grips on the handles of tools like pliers and side cutters. 2 coats gave me a complete seal and a glossy shine.

@circuitfxr1

9 жыл бұрын

patrick hendrickson plan sent

hi,where can i get a set of building planns?

The foam board is waterproof?

please post a video of testing that on water.

How does the boat fair in the water? Is it prone to sinking?

@circuitfxr1

6 жыл бұрын

Please see my other videos of it running on the water. There should be a link at the end of this video.

@circuitfxr1

5 жыл бұрын

Please the other videos of her on the water. No sinking.

Thank you

Are you using foam board that is or is not paper covered?

What kind of motor and radio did you use?

@circuitfxr1

9 жыл бұрын

I used a 2 channel 27 Mhz radio and receiver. The motor is a standard brushed 550 motor. The motor is a hobby grade motor designed for an rc car.

Cool boat! Could you please send me the plans.

@benjaminjonker103

8 жыл бұрын

Benjamin Jonker at fernandjonker{at}hotmail.com

thank you

What type of paint did you use? I'm designing and building my own boat using this method and I am not sure what paint to use.

@circuitfxr1

10 жыл бұрын

Hi Steven. I used Krylon ColorMaster spray paint for the light blue on the cabin. I used Krylon Indoor / Outdoor for the navy blue bottom. I sealed the foam with Minwax polyurethane clear gloss. The top coat clear (over the colors) is PlastiDip Glossifier made by Performix. I hope that helps. I like the Krylon products because I was spraying on the paper, NOT the foam. There are foam safe paints that can be used that are water based and have no petroleum distallates. The paints I used are NOT safe for bare foam. I also sealed the edges of the cut foamboard with diluted elmers white glue to keep the caustic paints from getting to the foam. e-mail me for details if you need them. Matt

@dpj74n2ri

10 жыл бұрын

I would like to make this boat. Could you pls. send me the plans to deksonsianturi27@gmail.com T­hank you :)

@circuitfxr1

10 жыл бұрын

Dekson Sianturi Plans sent. thanks for watching.

try using carbon paper underneath the plans.

Wherwe do you buy froam board. And hhiw much does it cost?

@circuitfxr1

9 жыл бұрын

Rex....I get my foam board from Walmart. Many places sell foam board in varying thicknesses and strength. I get the 5mm foam board from Walmart because it seems to be the most rigid. Dollar Tree also sells foam board, but the paper on theirs is thinner and the foam is less dense. Walmart price for a sheet 20"X30" is about $1.49 - 2.00 USD. Dollar Tree foam board is $1.00 a sheet. (same size)

What type of filler did you use

@circuitfxr1

4 жыл бұрын

any standard wood filler will work as long as you seal it with sealer or paint. you want something that is sandable.

Very impressive design. How much does it weigh?

@circuitfxr1

4 жыл бұрын

About 3-4 lbs with all the gear installed. Battery pack, radio gear, motor, servos, etc. It could be given ballast if you need a deeper draft.

@NikkiTheOtter

4 жыл бұрын

@@circuitfxr1 What batteries are you using in it? I tend to run heavier packs for my boat stuff if I can get away with it, just because pushing against water draws so much more power.

@circuitfxr1

4 жыл бұрын

@@NikkiTheOtter I am using a standard 7.2v NiMh battery pack. A heavier battery would need a platform or support mechanism to avoid deforming the hull. Remember, this is foam board. Some people use lead acid batteries to give longer run time, but a good LiPo battery will do the same job and is much lighter. I am old school. The NiMh batteries are a good fit for me.

@NikkiTheOtter

4 жыл бұрын

@@circuitfxr1 Ah, ok so my 5000mAh LiPo would be fine for this?

Can I please request the plans as well? thank you

Um what type of paint did you use to spray the boat?

@circuitfxr1

9 жыл бұрын

I used a variety of paints for the different areas. The primer is a water based latex spray. The color coat is Rustoleum acrylics. The clear coat on the superstructure is a general purpose clear acrylic. the clear for the hull is a PolyUrathane clear made by PlastiDip. this is the same company that makes the liquid rubber dip for tool handles. I have found that using a high quality polyurethane clear coat as a sealer, over the primer, gives a good smooth base for the color coats. ALWAYS test your paint of choice on a scrap piece of foam board before using it. Some paints will eat the foam.

@johnathan3780

9 жыл бұрын

Thanks

did u make the anchor

@circuitfxr1

8 жыл бұрын

+Jose Lacera yes. I made the anchor from plastic flossers. The round part is from model car wheel parts.

@joselacera8716

8 жыл бұрын

man I thought it was made out a mold thank u for the video I would like to make some boates for me but I don't know where to start if u can help me it would be great or sell me some plans thank u matthew

@kevdon4445

8 жыл бұрын

+Matthew Autenrieb . Great build, my 11 y.o. son and I would love to build it together. Could you send us a copy of the plans? thanks in advance!

hi im beginner doing projects ...can u pls send me the plan

i like it.... where did u get the plans?

@circuitfxr1

9 жыл бұрын

I downloaded the plans from a hobby website. I don't remember the name of the site, but if you give me your e-mail addy, I will send you a PDF of the plans.

@ibbyboo90

9 жыл бұрын

my email address ibrahimmorawej@gmail.com

How get w did you get the transom and bulkheads as one piece

@circuitfxr1

9 жыл бұрын

Jeffrey, you need to draw the first half as shown on the plan. Then you need to turn the plan over and draw a second one next to the first. This is called "mirroring". You will need to make a "mirror" image of each of the bulkheads and the transom. Draw then together to make one piece. Thanks for the question. I also like to oversize the planking panels and trim the excess after it has been secured to the frame. This allows for a perfect fit and allows for minor imperfections to be compensated for within the frame. Good luck with your build.

@jeffreyking6345

9 жыл бұрын

thanks

How much for the bits cut out and not assembled?

@circuitfxr1

4 жыл бұрын

Sorry, I am not able to do that anymore.

Please send me the plans this boat, thanks, be succes

Hi! This boat very nice. Good job it's my hobby too. I am from Albania. How can I find free downloadable model ships? Anyway if can send me a copy of this plan,and what glue is better to use,and about the paint too. I ask because here in my country does not exsist those materials. Thanks

@circuitfxr1

9 жыл бұрын

***** Please look at RCGroups.com for downloadable plans. This is the world's largest and best rc forum in the world. Many excellent people there who will help and answer questions.

and how many boards did you use?

@circuitfxr1

9 жыл бұрын

If memory serves me correctly, it was 3 boards total.

@lachiebrad2104

9 жыл бұрын

thank you ;)

Can you please send me boat plans..?

So, would i need to pay for the plans to be sent? or?

@circuitfxr1

9 жыл бұрын

Orion A No payment. Just need an e-mail to send to. :)

@OrionA

9 жыл бұрын

Oh, okay cool. I guess if you can, send it over to "gohanguy22@yahoo.com".

hi sir mathew i am truly amazed on this tutorial how ever i have a big request to you if i could just have your please 😊

@johnramirarayata7185

5 жыл бұрын

john.ramir.arayata@gmail.com

nice work the plan pls

@circuitfxr1

9 жыл бұрын

Skander, I need an e-mail addy to send to.

Thanks Al. I have a video of her running here on youtube. Just click on my name and then select videos. You will see a video named "Who-Doggy maiden voyage" That is the one. Enjoy and thanks for the compliment.

can you give some plans or download sites for it

@circuitfxr1

9 жыл бұрын

I will send you the plans if you give me an e-mail to send to.

@circuitfxr1

9 жыл бұрын

plans sent

hi ok very good

Can you send me the plans please

Can you please send me the copy of the plan

Merry Christmas and Happy New Year! I want to thank everyone for your wonderful comments. I have been overwhelmed with all the requests for the plan of this boat. Please be patient as I do my best to send to everyone who makes a request. If you have not received a plan or a reply, please send me another request and I'll do my best to get it to you ASAP.

@tacomamactech

8 жыл бұрын

+Matthew Autenrieb Please send me a copy of your 30" PT boat at your convenience. Joe Cleary, Tacoma WA o5techman@yahoo.com

@thomasbarr3912

8 жыл бұрын

can you send a set of plans to dig tam@hotmail.co.uk

@thatdude1079

7 жыл бұрын

I just want foot long rc plans small boat or the largest you can make and I'll make a video of a boat you can ride in

@ehhso634

7 жыл бұрын

Now i just need to d some wings and i have myself a "PBY catalina", Thanks

@stampydragon2739

7 жыл бұрын

Matthew Autenrieb hay I am just wondering if you got the design from a man called Roger foord as he made the exact boat out of wood about 14 years ago or so I never met him but he was my grandfather and it's siting in the loft with unfinished electronics o btw would you have any Idea how to make the electronics for a boat like the one in your video if so send me a email with a wiring diagram as I would really appreciate it. Btw my email is connor.foord @btinternet.com

Can you make a rc cruise ship

@circuitfxr1

9 жыл бұрын

I don't see why not. There are many people who have made an RC model of the Titanic. I'm sure the foam board would work for that as well. Try it and let us know!

Hi, nice work can you send plan to me please?

@circuitfxr1

4 жыл бұрын

Erik, I need an e-mail to send to.

Juliana...I used 5mm foam board to build the boat. Please see my build video called "How to make a scale rc foamboard boat" Thanks

@stancoffey

9 жыл бұрын

Hi man you did an awesome job !!! I was wondering if you would send me the plans for the PT boat thanks Stan

@circuitfxr1

9 жыл бұрын

stan coffey Stan, I need an e-mail to send to.

@stancoffey

9 жыл бұрын

Matthew Autenrieb Im sorry was half asleep my E-Mail is stancoffey@live.com

@circuitfxr1

9 жыл бұрын

stan coffey sent

@electromaniac03

8 жыл бұрын

Matthew Autenrieb very cool did it sail?

its $100 for the plans??

@circuitfxr1

4 жыл бұрын

No charge for the plans. Just share your e-mail.

very good build my son would like a copy of your plans if that is ok

@circuitfxr1

4 жыл бұрын

Rob. Thanks for the compliment. I need an e-mail address to send the plan to.

@robmitchell4628

4 жыл бұрын

thanks matthew my son matthew will enjoy this projuct and my email is rob.mitchell410@gmail.com

hi uncle... i want a copy of the plan.can u give me that

ill play hockey with you

My apologies to all who are requesting the plans. I have misplaced the plans and am currently seeking through 1 terrabyte of files to find it. If and when I find the file I will begin sending it out. Thank you for your patience and understanding. These kind of things happen when upgrading your computer.

@vedishkukshal4887

5 жыл бұрын

Just have a week's t make the mdel

Please give me your e-mail address if you want the plan for this boat. Thanks

@patallsteadt2865

9 жыл бұрын

Matt, I tried to cut out your plans, three times, but my hands and brain do not work well together. What would you charge me to cut out the parts and mail them to me? I would gladly pay for the materials, time, and postage. Patrick Allsteadt, Clarkston , MI

@circuitfxr1

9 жыл бұрын

Pat Allsteadt Pat...I would need $12.00 for the foam board, $20.00 for the labor, and whatever the postage will be for shipping to you from central Florida. I am guessing that would probably be in the range of about $5-10.00 as I would need a 32" long box to put the parts in. I will also need a week to do the work. my e-mail is circuitfxr@yahoo.com. contact me there and we can come to an arrangement. Matt

@patallsteadt2865

9 жыл бұрын

Matt, Thank you for getting back to me. The price sounds fair for purchasing the foam board, cutting out the boat plans, and mailing the pieces back to me for assembly. Where do I send the empty shipping box and check for the services? Thank you, Patrick Allsteadt 5051 Curtis Lane Clarkston, MI 48346 My email is ******@**** On Thu, Jan 8, 2015 at 7:48 PM, Pat Allsteadt wrote: > Matt, I tried to cut out your plans, three times, but my hands and brain > do not work well together. What would you charge me to cut out the parts > and mail them to me? > I would gladly pay for the materials, time, and postage. Patrick > Allsteadt, Clarkston , MI

@rclovers2560

9 жыл бұрын

hiii Matthew can u plzz send the plans to my email plzzzzz this is my email adresss: hrishikeshrkumar@gmail.com

@rclovers2560

9 жыл бұрын

rc lovers haiii Matthew thnks for for the plans which meatterial have u used to fill the gaps

please plan send it please again thanks alot

Matthew. Your build video would have been EXCELLENT....if not for the distracting background music. If you were to sell this boat....I would love to buy the plans for it. However, cut the music.....or add music that is soothing to the style of the beautiful boat you created. I hope you understand what I am saying. Great boat and video youtube presentation....but again.....take out the distracting music. If you add music....calm it down to match the beautiful calm spirit the boat has. :0) Just saying.

@circuitfxr1

8 жыл бұрын

+Paul Randall “Randy” Hicks Thank you for your feedback. Due to the length of the video, I attempted to find uplifting music to avoid boredom and sleepiness. please feel free to mute the sound if you find it distracting.

@tomsalt8689

7 жыл бұрын

This comment has literally been copied and pasted from another video and the name at the start changed.

@paulrandallhicks6498

7 жыл бұрын

LOL....good advice Matthew. Never thought of that. Duuaaahhh....on my part. Thanks for info.

can you give me the drawings of ship with

Hello mathew is very good :) u can sent planes? Please thaks very much

@circuitfxr1

9 жыл бұрын

I need an e-mail address to send to.

could you send me a copy of your plans i have small use in my hands but i think i could make this thank you COLIN

HI CAN YOU SENT ME THE BOAT PLAN PLZ

@circuitfxr1

9 жыл бұрын

I need your e-mail address to send you the plan.