So this is WHY I've been hording all this veneer and exotic scrap Thank for sharing your craft, and wow that's a sweet rosette

Pin stripe power suit while glueing.... very boss!!. Its like "yeah I just brokered a multi-million dollar deal, now im gonna go clamp some wood with glue" I love it and going out to have a bespoke coverall made to have pinstripes.

Could watch this guy for hours. Excellent!. And very reassuring to see a luthier with glue on his hands too.

Excellent tutorial with great theme music. Thank you v much!

Absolutely superb!

fantastic! thank you for the information, you work so calm and is a joy for us to see a master at work.

inspired to begin learning.....thanks

i enjoyed every second and learned some beautiful stuff and ideas

Parabéns, escelente artista, e ainda tem muita classe...

Uma incrível obra de arte!

Beautiful work!

Utterally inspiring

Belo trabalho . Uma obra de arte essa rosácea. Parabéns.

Very interesting to see the process as a guitarist. This is more creative than the other approaches I've seen.

Di solito gli artigiani sono gelosi del loro lavoro, grazie Maestro per quello che ci regali.

Lindo trabalho, perfeito, parabéns!

I got the jist of your technique better after watching it for a second time thanks michael

Beautiful.

Surprisingly simple. I imagine you could use these techniques for many types of work.

Thank you very much for the answer!

Nice video. Beautiful rosette. Thanks for sharing.

Beautiful work Michael! Brazilian greetings. With your tips will try to do my own rosettes thank you

I did not realize so much effort goes into making a Rosette. ONe day hopefully i'l be able to buy one with a beautiful rosette.

Great artwork .salute luthier

Que bonito trabajo, felicidades.

Muito lindo o trabalho manual. PARABÉNS pela construção deste vídeo... Aqui no Brasil trabalho num museu que expõe a história da madeira, e em parte do acervo tem trabalhos feitos em marchetaria da década de 1950....

Thanks Tony!

amazing thank you

nice work. Thats a lot of work

thanks for making this video, helped me a lot on my guitar making course... :o)

great job ^:)

Thanks, I put in the oven to heat it up..... once it's all hot I screw the hose clamps down tighter because the glue softens and it can be kinda molded together and any gaps will work out...... I set the temperature to around 450 wrap it in aluminum foil to keep glue from dripping all over the inside of the oven (my wife would kill me) also to keep the wood from burning..... the temperature isn't that important whatever works for you, and depending on how large of a rosette cylinder you have.

how do you proceed to cut those rosettes into individual ones ? amazing work by the way

cool!

I want to thank you for sharing this knowledge with us amateurs. Question regarding what I see when you clamp up a single log. Are the veneers lying flat on the gig, meaning that you are then pressing sideways on the veneers when squeezing the glue out? You don't show how the sides of the finished log are tapered to take the angle of the rosette circle. You don't by chance set this angle when you squeeze the log with that sideways pressure??? That would be cool!

2:13 "oral B, number one luthiers choice!"

Exelente artisans

wished you had video on the slicing. :)

👍👍👏👏👏

Otimo muito bom

👍👍👍 👏👏👏🏆🏆🏆🏆🏆 LIKE nº 999 - Curitiba/PR/Brazil

beatyfull music what is the theme?

How many did you get from the log?How thin you slicing them before install?

Once I glue and clamp the cylinder I heat it up the glue and it becomes soft. I then apply more pressure with the hose clamps and it goes together nicely. Then I let it cool down.

Really nice rosette How many did you get out it?

"Would you like extra veneers with that?" LOL jks, the video was amazing....thanks :D

Thanks for making this video. I would like to make a series of rosettes for my guitars and I would like to know how long in the oven, what temperature and why?

@JMichaelThames

4 жыл бұрын

Long enough to see some glue bubble out.

It's water to keep the wood from swelling just on one side.

@JMichaelThames Yes, the side angle was question, and the orientation of the veneers in the little clamping jig. I was thinking yesterday that the with the large number of individually made logs that go into the layup of your rosette production, that your single log clamping jig must produce a fairly consistent log each time. It's a wonderful piece of work. Thanks for commenting.

Once you have glued your first rings of veneer how do you accomodate that radius into the tiles? Cheers, Paul

what are the squares of the begining made of??

@JMichaelThames how do you detach the wood cilinder from the rosette

I'm not quite sure what you mean. But yes I think. To answer your last question the jig I clamp the final veneers in has an angle already in it that matches the angle.

@mrbannon0 Hey, I don't know if you ever figured out what song that was, but I just found out that it is "Sadaude" by roland dyens.

beutiful... is that paper you're using or wood veneer?

@christianharbour821

7 жыл бұрын

Wood

es madera de balsa las que parecen planchas chiquitas? que madera se usa para este trabajo?

what's the spray right in the beginning?

It's an old blazer, you should see just how good I look when I go out in public...... girls go crazy for a sharped dressed man!

hello, why did you spray them with water at the begining?

the owner of the glue factory gonna be very rich man because this man making a few rossete XD

Here's an actual question not a dumb remark - why do you put in in the oven? how hot? how long? Thanks.

what is the song that starts around 9 minutes in?

I seen you put the rossette in the oven, isn't that going to ruin the glues strength?

Alatl lekukan guitar klasik

Could somebody please tell me what piece is being played at 7:48? It's not Gran Jota, as far as I know.

at first i thought he was making baklava.

What temp. was your bake out of the rosette?

@JMichaelThames

8 жыл бұрын

+Dwayne Kutz 400

Mas como cortar depois?

El vídeo regular pero la música de arte

what a messy job... but results are wonderful

lol your comment made my day :D

Клей надо равномерно наносить на склеиваемые поверхности .

I cut them like salami on a bandsaw, however you must glue a straight piece of wood to the opposite side of the cylinder, never try to cut just the cylinder in the bandsaw. very dangerous.

Ha!

Remember kids, for best results, only put your rosette cake on the top rack and bake until golden. Never broil!

good video, hoping or rather sought, apart from the work itself, saying that is used to do the job, that wood? that glue? the time it takes everything, as the work is beautiful and worthy of admiration, but is just that; when I read: How to make thought it was real, I say this very well, just that would be better if given more knowledge, thank you, I hope you understand well use the translator, PS would be very good that Mr. luthier can tell us all their experiences, and thanks again

Does somebody knows how's the second theme named? :D

@KevinToine

9 жыл бұрын

José Antonio Mtz. Saudade 3 by Dyens

the part when you bake the cake

Parece q fuera papel fomi e eso?

I think you should be more generous with the glue.

@jfan4reva

5 жыл бұрын

He somehow managed to get glue everywhere except his suit coat. He does beautiful work, but he'd be a terror with superglue ("Help! I can't reach the de-bonder!") Lol!

This video was sponsored by tightbond 😂😂

Nice job but to many glue

Oh dear- those fingers so close to that shaky bandsaw blade- please don't try that at home. One slip, and there goes your hand......

@crancarenotafish

5 жыл бұрын

Not his hand but the tip of fingers. It is set to probably less than 2 mm thickness, so can't cut a hand. There no other why to do it other than probably cnc or precision table saw, which is more dangerous. I'm doing this at this moment, any tip to avoid risking my index welcomed.

@jfan4reva

5 жыл бұрын

@@crancarenotafish 2mm off a nail on his right hand and he'll need to relearn how to pick until it grows back. 2mm off a fingertip on his left hand and he won't be playing for months. All because he didn't lock down the table on his band saw. Of course he's probably been using it like that since 1992....

How do you get the wood so thin? I refer to those rectangular sheets that go on?

@JMichaelThames

6 жыл бұрын

Buy veneer, or I thin it on a drum sander.

@owenlewis8944

6 жыл бұрын

Thanks

@smurphy50

4 жыл бұрын

Michael Thames Wonderful video thank you. Is that mechanism on the drill press meant to radius the thickness of the Veener slices or is that just a general thinning technique.

La j de dolores

02:14 oral-B reklam

WHERE IS THE VIDEO SHOWING HOW TO CUT THE ROSETTA FROM YOUR STOCK PIECE ??**DR KEL

you don't dress up when in the shop? I like to wear a three piece suit, or a full on beef eaters uniform if i'm feeling festive. Always look your best i say.

Claws him to cut the hair ...

Too bad the part where the player mutes the part of the "trumpet fanfare" sounds a bit "fart-ish" ; that guitar needs to pass gas but overall it's good playing....ha!

I prefer to build with Stodoys plans.

Azt gondolná az ember a szalagfűrész libikókázó munkalapja és az oszlopos fúróba befogott csálézó vékonyító csiszoló láttán, hogy ebből nem sok jó sülhet ki. Aztán a végeredmény mégis döbbenetesen aprólékos és hajszálpontos. #gitár #guitar #rosette #rozetta

who wears a blazzer in a woodshop using glue? hes gonna ruin his suit.

Да-а, геморрой ещё тот

Finnish the fucking story!!!!

So, you married a potential murderer, who tells you what you can & can't wear? Sounds scary. Time for a divorce, methinks. :p Agreed on the "helpful video" bit though. Looks pretty time consuming, but the end result is very nice.

Que música más aburrida

terrible music by Tarrega

@JMichaelThames

5 жыл бұрын

Thanks for your dumbass comment.

che palle la Gran Jota di Tarrega...

I wanted to pull my own head off listening to that terrible guitar .

@JMichaelThames

Жыл бұрын

Why didnt you?