How to Make a Part IV Friday the 13th Mask
Тәжірибелік нұсқаулар және стиль
Here is a full walk-through on how to make your own Friday the 13th Part VI: The Final Chapter Jason Voorhees hockey mask. NO it isn't a detail-for-detail match, but it'll get you started or maybe even inspire you to make an even better version!
Masks and vinyl chevrons are in my Etsy shop!
www.etsy.com/shop/bighushstuff
Here is the Italian varnish:
www.dickblick.com/products/ma...
X-Acto Knife:
amzn.to/3r8PWrC
Dremel Tool:
amzn.to/3R6FAD6
Check out this blog for GREAT insight to the actual masks:
jasonlivessince1980.blogspot.com/
Follow me on Instagram:
/ bighush979
Follow me on TikTok:
/ bighush
Follow me on Twitter:
/ bighushoftx
My Merch Shop:
big-hush-stuff.creator-spring...
Follow me on Facebook:
/ bighush
Chapters:
0:00 - Introduction
0:50 - About the Blank
1:28 - Step 1: Sand the Mask
2:08 - Step 2: Create Axe Mark
3:38 - Helpful Tip: Cover Your Snaps
4:06 - Step 3: Basecoat of Color
5:33 - Step 4: Adding & Marking Chevrons
6:29 - Step 5: Adding Damage & Scratches
8:34 - Step 6: Adding "Dirt"
11:26 - Step 7: Damage After Dirt
12:07 - Step 8: Adding "Blood"
12:58 - Step 9: Finishing Coat
14:22 - Helpful Tip: Buffing the Top Coat
14:53 - Strap to Snaps
15:20 - Final Result & Comparison
15:43 - Closing Thoughts
Пікірлер: 151
The movie mask is transparent, according to the creators it's made of a clear resin that was painted on the inside that's why they used varnish
@littlegman3817
Жыл бұрын
Ok smarty pants give him a chance
@KrahYT
Жыл бұрын
@@littlegman3817 I don't know what's wrong with telling him how the movie mask was made, which also helps him with a problem he had
the format of this video was really well shot. the back and forth explaining and working on the mask was great.
I was initially sceptical when you chose not to use primer, as I love the effect it creates when you do damage. But I ultimately ended up really liking how that dirt stuck to the bare plastic.
The part 4 mask is definitely one of the best looking masks in the franchise. Will you be doing these kind of tutorials for the rest of the masks from the other movies?
@Gamer-ev8xx
7 ай бұрын
Even part 8 Jason mask
Very cool you should make a dream Jason with part 5 chevrons
A They Live inspired mask would be absolutely wonderful!!! Keep up the good work!!!
Love your videos! Your a big inspiration to my son and I in our mask making! I constantly re-watch your videos! I hope you do another fan submissions video soon!
YES Another Good Detailed Mask Making Video Keep Up the Good Work Hush
This video is a blessing from god, thankyou big hush i was just about to request this
Super awesome! The mask looks Rad! Looking forward to the varnish way of making the mask! Theres no videos on that and I've always wanted to see someone do it! I wanna make my masks that way, but that shits expensive! Someday!!!
Another great video Big Hush, can't believe I missed this episode
Man I’m Loving the commentary it helps me so much!
Still looks like the movie. Awesome work!
Awesome stuff. Always love your work. 🤘🏻
The clear coat IMHO also gives the Part 4 that rained on look in the film cause that film was super rainy through out the night scenes with Jason going crazy, plus in the close up shot of Jason walking to Tommy when he was going to reach out to him you can see water dripping down the mask which I thought was cool to see.
Another awesome tutorial video, love your content man
Idk why anyone debates you on barn red. I think that its literally perfect in every sense of the word.
Best mask in the series man
Brick red is a great dried blood color. MAkes a great rust color too.
Great job!
I like how you make those Jason mask in the background those are pretty cool❤❤😎
great job as always man!
Looks awesome
Hi, Big Hush. I'd loved this video that you've done recently. My name is Logan Hayes Barsi, and I've been a really big fan of your awesome KZread channel on rehauling and converting hockey masks of Jason Voorhees, and I really think that you definitely should make a Corey Cunningham scarecrow-style hockey mask from Halloween Ends, I'd think that a lot of fans of your channel would really like to see that sometime.
Dope, Bro you got talent
This is a great video. I’ve got a Part 7 mask, would be great to see this
Superb I loved every minute of this thankyou I have now subscribed
Seu trabalho com as máscara do Jason são incríveis ❤👏👏
Thanks for going into more detail for the Part III and IV. These are my favorite mask looks and I continue to work on perfecting my own versions. When you used the lacquer, did you also use a clear blank? As I understand it, the FX guys took a Fibrosport Elite hock and made a clear blank, which they then painted with the off-white paint and patina. I'd like to give that a shot one day myself, but I'd rather see what you come up with first! Thanks as always!
finally u posted again
Great video
I like the part 4 mask
I really wanna send in a fiberglass mask if I ever get supplies up to make one cost effectively. That varnish isn't really widely known on the 3/4 mask, had fans debating for years what color the mask was. People swore it was legit mustard yellow even 😂
Love your videos! Please do Predator mask that would be amazing!!
Awesome tutorial, just bought one of your kits. I got 2 questions. What tip do you use on your Dremel to make the axe cut? Do you lightly sand over the clear coat after each coating or wait until the last coat?
You should make your ideal part 13 Jason.
Hey man I love your masks and your videos I've been watching since your very first one👍 Is there any way we could buy one of the masks that you make from you? Also if you find the time, one custom mask I'd really like to see would be a 2009 Reboot Jason mask, but with a Part 4 style Axe cut. If you can find the time to make a mask like that I'd really appreciate it bro🔥 Thanks for your time👍
( SANDED OFF ) could be a good name for a music video
Please pen you're one of my favorite youtubers
Wow😮
Is there any place I can buy leather head straps? I bought the neca mask but the head straps kinda suck and not much room for adjustment.
Nice 👍
How much would you charge for a special request? The alteration would be significant but also relatively simple, I want to change it into something a little different than you usually do for inspiration for a project I have in mind.
You made a accurate Part 4 Jason from The Final Chapter but I like your hockey mask from friday the 13th hockey mask
Hush can you make a video on how to put chevrons on on and line them up? I can never line them up right
Is it normal for the paint on the back of the mask to chop off more easily before adding a clear coat?
Is there a way to do this without spray paint my apartment complex doesn't allow spray cans whatsoever
Hey big hush could you make the grabber mask from the black phone? That would be so cool pls and thank you!!!!
great
A24 should hire you for the new show.
Jdf studios just opened up his shop again
Thanks you for doing the part four Jason and Canyon do part 6jason
Do you still use the almond colour on the original jason style?
Question, how do I submit mask too you.
@BigHush
Жыл бұрын
You can send them here: homemadehits.com/the-big-hush-spirit/ but I'm also working on a future project for mask submissions as well!
@alextriplett9414
Жыл бұрын
@@BigHush thank you so much man I really appreciate it.
Your underrated
Big hush can u make a ultimate warrior Jason mask please 🙏🏼
For your information I unfortunately was unable to make a tutorial on this I didn't really think of making one but I sanded down my mask and added like 4 primer layers let it dry and like 5 layers of meringue then used barn red for blood then added 5 coats of clear coat
Yeah, dont give it away yet!
Nice video big hush, could you make a scary bunny Jason mask for Easter??
I have a suggestion.....make a jason mask with the leather straps like they have in the movie see how it turns out
Have you ever thought about doing the varnish version again?
Can you try to make the grabber mask from the black phone
This is cool and my going to made the part 3 mask I made the part 7 mask
Overgrown mask similar to the lake bottom mask but instead of being at the bottom of a lake have it look like the body has been just laying on the ground for years
Where do you get your white masks from to make the mask
My aunt bought me a hockey mask ring I'm using my Dremel to give it a bit of damage so it looks like part 4 but to be honest if it didn't have the chevrons I would have gone for part 7
With the Super Mario movie about to come out, maybe you could do a Shy Guy or a Snifit mask.
I would love to make a Jason X mask and then make a full costume to go with it to cosplay in it.
Alright brother, love the masks as always, but it's time for a new HUSH original. I know it's been brought up plenty of times and I'm not sure why you haven't done these masks unless you're worried about being sued, which would be a good reason to not!? Anyway, if you did a four part video of making masks of all 4 members of KISS, that would be SO EPIC!!! I saw a video on KZread from a horror boy band called THE MERKINS who did a cover of I WAS MADE FOR LOVING YOU BABY that comprised of Jason Voorhees, Michael Myers, Ghostface and Leatherface all dressed up like KISS. Jason dressed up like "Space" Ace Frehley, it was awesome, but it SHOULD have been made by YOU!!!! HUSH, like KISS says, If You Wanted The Best, You Got The Best!! Your fans WANT the BEST Jason mask maker to make this happen, PLEASE 🙏
Sou do brazil e queria saber se você vende uma mascara, se sim queria compra a do remake 2009.
You should make a part 3 ending mask
Imagine a Friday movie and Jason has the hockey mask with all the damages from the other films
if you want to make it more accurate just reshape it using a heat gun but don't too much and check the photos of the mask from the end to made it movie accurate
You should do the south park jason mask from the imaginationland episode🤘
Do a remake on part 4 on a spirit Halloween mask
If I could make a request, I’d love to see a Jason mask in the style of The Legion from Dead By Daylight.
Leaving it white on the inside would make it a little more movie-accurate.
i'd love a mask
i wonder how he got all those scratches and halve of the chevrons gone we know how the axe cut got there but not the scratches
You should do a Rubiks cue mask
I bought a Part 3 style mask of eBay and regrettably, the maker didn't sand the mask evenly, and I think they used lower than 120 sandpaper, because you can see grains in the surface.
@BigHush
Жыл бұрын
That's unfortunate. Sometimes I even use 220 or 400 grit paper for a smoother surface!
@TomMSTie1138
Жыл бұрын
@@BigHush You know the old saying: Caveat Emptor, "Let the buyer beware."
That’s cool!! Do you know what the Italian varnish does by any chance?
@BigHush
Жыл бұрын
It gives it a golden/yellow tone. Check out this blog post for the details on that: jasonlivessince1980.blogspot.com/2016/08/how-part-3-masks-were-probably-painted.html
@GlowsHyper
Жыл бұрын
Thanks!!!
could you make a part 5 Roy mask pls?
Can you do one mask off Jason off all the integrants of kiss
Can you please do a Spirit Halloween mask into part 4
Can you make a Hellboy inspired jason mask?
pls make a combination of Guy Fawkes and Jason Voorhees mask. being the Guy Fawkes mask as a base.
10/10 very movie accurate
I need more videos please 😢
maybe a Jason-style Jack of Blades mask?
2:41 first thing I did was crack a part of the mask... I put some nail glue on it and I'm gonna sand it down and it should hopefully be fine
Can you make a DarthVader mask?
Why does everyine get the axe mark wrong its just a line down looking like a musical note
You put no effort in ur mask Jk love it love u to man keep the good work up
Sad my part 4 mask didn’t make your video I submitted for 😢
Can you make a Jason Voorhees mask based off the monsters from the last of us?
Can you make a beaver style Jason mask??????????????????????????????????
Big Hush how do you reshape a Jason mask?
@shaycormac4522
3 ай бұрын
What I used to reshape it: Warm water. Then, you gently reshape it to your desired shape and use cold water to solidify it. If you get my meaning. Update me too in case it doesn't work but to me, it 100% worked.
@shaycormac4522
3 ай бұрын
It is one of those plastic blanks right?
I want it it tomorrow okay
I do jason masks on paper and lightly color part 4 with yellow because its getting dirtier and if you look at a picture where he looks at his hand, the mask is a off white color, but, its still a yellow-ish color overall. When I did part 3 on paper, the yellow is more heavy