How to make a painted pallet sign
99% of the vinyl I use on my channel is Specialty Materials Brands I have tried many kinds over the years, and they are my absolute favorite. The quality is top-notch, I have a video where I wash a shirt 50 times, and the vinyl still looks brand new. • Thermoflex vs. Siser: ... They have the most extensive range of products and colors around ( there are over 90 colors in the ThermoFlex Plus and GlitterFlex Ultra lines alone). They also offer free product samples on their website, which you don’t see anymore. Trust me, request a sample because if you try it, you will know why I love it.
Request a Free Sample:
specialtymaterials.com/reques...
Specialty Materials :
specialtymaterials.com
* I DO GET FREE PRODUCTS TO TEST SPECIALTY MATERIALS TO TEST, BUT I STILL PURCHASE 95% OF MY VINYL. I WILL ALWAYS TELL YOU WHAT YOU GET FOR FREE. *
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Affiliate Links (I Earn a Small Commission if You Use Them) :
My Amazon Store (Has most of the things I use unless I state otherwise) :
www.amazon.com/shop/betsygotcher
Vinyl, Heat Press, and Cutters :
Non-Affiliated Links:
HeatTransferVinyl.com (carries all Specialty Materials Products):
www.heattransfervinyl.com/
Affiliate Links (I Earn a Small Commission if You Use Them) :
Heat Press Nation :
shrsl.com/3t4xq
15x15 Heat Presses:
shrsl.com/3t4up
16x20 Heat Presses:
shrsl.com/3t4vb
shareasale.com/r.cfm?b=113707...
Cricut:
cricut.pxf.io/5bEr9b
Sublimation Blanks and Supplies:
Links (I Earn a Small Commission if You Use Them) :
Conde: Use Code: CPN-CCV22 $5 off $50 purchase:
shrsl.com/3mxhs
Koala Sublimation Paper: Use Code: Betsy15 to Save 15%
shrsl.com/3mxhk
Design Software and Commercial Use Fonts and Graphics:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Creative Fabrica:
www.creativefabrica.com/ref/1...
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Screen Printing:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Ikonart Smart Screen Stencil: Use Code: CuttinCorners for 15% off
ikonartstencil.com
Find me on social media:
Instagram: / cuttincornersvinyl
Facebook: cuttincorners
Cuttin Corners Group on Facebook: / cuttincorners
Betsy's Bees (a fun place to hang out and share your crafts): / 260612806191309
I can't thank y'all enough for sticking by me through hurricanes and health issues, and everything in between. It means the world to me all the love and support that I have received throughout the years.
XOXO,
Betsy
Specialty Materials, #cuttincornersvinyl, Heat press Nation, Cuttin Corners Vinyl, heat press nation 16x20 signature series
Пікірлер: 237
Thank you for taking the time to share your idea...I really enjoyed learning about these signs I see everywhere...now I can make my own ;-)
You amaze me, you can do EVERYTHING vinyl. I so enjoy your videos!
I miss home! Pretty girl Texas Accent, Saturday football and smoker goin.....oh....and Sir George playin in the back ground! I'm about Fix'in to jump in my car and head back HOME (Central Texas). Good job on the sign!!!
Great tutorial....I wanted to learn how to stencil...You make look so easy!!!
Thank you for taking the time and showing this. It helps a lot.
Just a suggestion: use a smaller brush to fill the crack in the wood (just for the H) so it connects all the way across and doesn't look like two i's
@TheMischiefmanaged
5 жыл бұрын
100 keep writings kzread.info/dash/bejne/qXWMo62pipvZmqw.html
@stefanieleal53
4 жыл бұрын
I agree
Hi! Do you recommend removing the vinyl when the paint is still wet? I would have thought to keep it on until the paint is dry but I haven’t done this before so not sure if there’s a benefit to removing it when wet. Thank you!!
Glad I found you! Helpful tutorial for a newbie! Making a Texas theme kid for our BBQ pit. Shout out from Shepherd, TX
would the 631 vinyl work better than the 651, or is there that big of a difference?
I'm so new to this, but instead of wasting the letters, couldn't you keep them too and do another sign with them?
@dfelixrx7
6 жыл бұрын
cmfnjaf07 - nope. It’s vinyl. It’s what she’s using as a stencil.
I think it turned out really cute
New at this and I love your videos especially since I am from Texas also!
Super cute! I want to make this!
Great idea! I'm going to HL tomorrow hopefully they have one similar to this
Enjoyed your video. Trying to make a few signs in the future for gifts. Thank you
nice work , i just paint my dresser with oil paint it look a mess what type of paint can i use to draw on it?
What about the two lines on the H and the E on the home sign
Thanks. No it's on a table turntable. Do you know if spray modge podge
Hi great Vlog. Exceedingly good Home Sign. I love White letterinv, looks so good.x
I love this , you make it look so easy ! I will try this . Thank you .
I have the same pallet and i just put wood stain on so do i need to put mod podge on it also before i put the vinyl cause i have had to much bleed through
Glad I came across your video it’s the only one I’ve seen where they are actually painting the letters etc.
Hello Texas! I am from Arlington. Loved your video!
😍😍😍😍😍😍😍😍😍 Love the sign
How do you prep the wood ; i tried a sign and paint came off with transfer tape .
I love it! Thanks for the video
Did you seal your board before sticking the stencil on it? I have seen most of people use the 631, and I am amazed that the 651 you used didn't peel off the base paint 🤔
Did you coat your sign with any protective wax after the "HOME" paint dried? I'm guessing it was going to be hung outside, right?
I loved that! Just subscribed. Can't wait to checkout your other videos. Thank you so very much.
Can you tell me the steps I would have to do to remove the paint off the palette?
Love this!!!
I like your videos and I’m also from Texas. I do have a suggestion and I’m sure you just did it that way so it’s was just one take but I would let it fully dry before peeling the stencil off so you don’t have to be extra careful from getting wet paint on the rest of the board. Again nice video.
Did you use any kind of vinyl? I’m new to Cricut and am assuming there’s a setting in the software and on the machine for different materials?
What is the name of the font you used?
Will your stencil not pull paint off the board when you remove it?
I love adsouly a bore and this one I not a true Texan but I got here as soon as I could. So yes love love love it.
Thanks for your video!
Do you do your own vinyl? And do you recommend a certain machine or printer?
Love this thank you
See I can do all of that! I just get mixed up w/ how u get ur Texas State sign? I couldn’t find one on my Cricut App? I’m having problem w/ using the app? Of knowing what to do? Or not to do? If so I’d be good to go! But I love the project and I love that color of paint, that’s my fav color
Do you recommend a place to get a stencil like the one you used?
Your good at this
Do you have to seal it after removing the vinyl?
is there a difference or reason you chose the paint you have? Is it different than acrylic paints?
Cool technique 😀
What kind of paint? how long you wait for it to dry?
How long did you let the pallet dry before applying the stencil and metallic paint? I want to start making these but don't want to pull the paint off the wood. Awesome video!
How would I get just the outline as you did
Can you list all the stuff you use for the project?? Thank you
what vinyl did you use on this pallet sign?
what machine do you use?
How long does it take for the paint to dry?
Love it! What font style did you use?
would it be better if you made the stencil using card board? that way you can re use it. just maybe use tapes or pins on the corners to keep it steady?
Beautiful
Can something else be used in place of vinyl for the stencil? Don't want to waste vinyl lol
Hi where do you buy the vinyl please. I a. International
Any advice for peeling paint? More specifically... I stained the wood, placed the vinyl wording outline on (wanted the letters white, on stained wood, similar to what you did here). Painted mod podge in order to avoid the bleeding. Then painted in the white over the mod podge letters. Let it dry then went to peel up the vinyl and the paint came up completely! Gaa!! How do you avoid this?
@sarahzepke1702
6 жыл бұрын
Angela LaFontaine You have to pull the stencil off while the paint is still wet. This way the paint isn't drying connected to the paint that's on the stencil.
This may be a dumb question but I noticed you didn't wait till the paint was dry to peel the stuff back or did you just do that for video purposes? I'm new to this whole thing and your videos are helping so much!
@TheCupcake1029
5 жыл бұрын
I'm sure you know this already, but you have to peel the stencil off while the paint is still wet so you don't peel the paint off the design.
@thomasdennis8067
5 жыл бұрын
If the paint dries to the stencil Removing the stencil could pull up the paint.
@squirrelsrock3354
5 жыл бұрын
Thank you for asking! I wondered the same thing.
How do you make the stencil
do you seal it when you are done?
I am new to this, how did you trace the stencil to the mat. I need to see from the beginning how you did that.
@deannking4093
3 жыл бұрын
Where and how do you get the stencil?
thank you very much for this video i learned a lot from it i am ad from the netherlands vlissingen in europe
Very good tutorial ! What font is that?
What weeding tool do you use?
Could you please tell me if I am putting vinly onto a piece of painted wood should I seal it? Can I use spray Modge Podge sealer or adhesive spray? TIA
@CuttinCornersVinyl
6 жыл бұрын
If your using it outside yes.
@christinatregoning3910
6 жыл бұрын
Thanks. Do you know if spray modge podge sealer equal to Clear Coat?
Can you show a tutorial on using canvas? Thanks
What is oracal 651?
wouldnt you think to have it Dry first before you Remove any thing, and also what do you do if you dont have a cutter or a Cricket to cut out any letters >????
@bryannahudspeth331
5 жыл бұрын
Patty J You don’t let it dry because if you do, it pulls up parts of the letters. Always pull up your stencil while it’s wet.
what size is this pallet?
You left out a lot of information. Where did you get the letters "home" from? Did you buy them or create them yourself? What type of pen are you using to lift the vinyl off. I also wanted to see how you painted your wood. Other than that, nice job.
Awesome video! I tried painting a wooden sign, but my painted letters started lifting away when I pulled up the vinyl. I used modpodge and acrylic paint. Do you know what causes this?
@CuttinCornersVinyl
6 жыл бұрын
Did you pull the vinyl when the paint was dry?
@amandam5175
6 жыл бұрын
Yes, I waited about 20 mins to start peeling the vinyl, and the paint was dry. I used a thin font, and the painted letters kept cracking off when I removed the vinyl.
Thank you for the video, it is a very nice project. I really wish people would just take the positive things and leave all of the negative comments to themselves. I appreciate you taking the time to share.
you mention that it works on canvas. I tried it but the paint always bleeds
@iopsych2993
4 жыл бұрын
A very light coat of Mod Podge over your stencil, letting it dry before painting, should seal your stencil and prevent bleeding.
When I use 651 my background paint pulls off when I remove stencil ... Any suggestions
@CuttinCornersVinyl
6 жыл бұрын
Make sure your paint is dry I try to wait about 24 hours before putting on the vinyl
What does that decal call?
Were do u get your stencils from
I've used stencil vinyl and it doesn't stick to the wood - if the wood is either bit rough! What's your solution?
@CuttinCornersVinyl
6 жыл бұрын
Tanea Hynes what type of vinyl are you using?
@chasinghappiness87
6 жыл бұрын
I have the same issue and I use cricut’s vinyl. Would putting a layer of mod podge matte on it help the vinyl stay in place?
Great tutorial for a simple stencil, but my question is, would there be a good way to keep the paint from bleeding at the gaps in the pallet sign? A lot of the comments here are focused on the H missing the line, but all I noticed were the paint bleeds inside the gaps. Would it be good to tape that area off or would it still bleed? Painters tape maybe?
@iopsych2993
4 жыл бұрын
Mod Podge seals and prevents paint bleeds
For the wood signs using stencils what type o vinyl do you use?
@CuttinCornersVinyl
5 жыл бұрын
Oracal 651
What did you mean when you said that you "dry" rubbed black over the painted sign? I love the way it came out!
@terinaaroni65
6 жыл бұрын
Like feather weather.
Is it me or is it missing the line that goes on the H?
@CuttinCornersVinyl
6 жыл бұрын
desire booke nunez it's not it's just how it fell on the board
@JoelHudson
6 жыл бұрын
Or it is how it fell OFF the board :-)
@jackieeasterwood3001
6 жыл бұрын
I'm with you. I think it needs the line there. Even if it covers the crack in the board I would still add the white line.
@desirebooke6518
6 жыл бұрын
It still looks nice tho
@jjzinn3427
6 жыл бұрын
I would add a thin line on both sides of the crack. It draws your eye in to see the missing line. Great project.
why didn't you let it dry a little?
have u got any video on how to make the designs and cut setting as I cannot use my cameo what so ever thanks for ur videos
@CuttinCornersVinyl
5 жыл бұрын
unknown misy yes I do under my silhouette playlist
@unknownmisy8132
5 жыл бұрын
@@CuttinCornersVinyl thanks replying
Hi mam I am doing some DIY work for my home. I am using acrylic colour on pine wood items. But finishing is not coming out that great. I have seen your products and the finishing is awesome. Are you also using acrylic colors or any other type of paints? I have seen online that water based latex paints or oil based enamel paints can also be used for the same. But I am not sure. Can you please help me out. Thanks in advance.
I’m new to this and haven’t purchased supplies. Can you tell me what you used so I can purchase them
@mackenzieschaff8778
4 жыл бұрын
You would need a vinyl cutter (silhouette, cricut, etc), oracal 651 (or any other vinyl), contact paper and weeding tools!
Have you done any designs using 12" x 12" ceramic tile?
@CuttinCornersVinyl
7 жыл бұрын
April Anthony yes I have what are you interested in seeing?
You don't wait til its dry before peeling off the vinyl?
@haileyelaine2905
5 жыл бұрын
You'll get a softer line when you peel it wet. A more crisp line when it's dry. My fiancé paints fire trucks and cars and I paint canvases and wood :)
Tips for making a sign that is longer than the 24" mat? I stained the wood and then want the wording in white.
@suzy0820
7 жыл бұрын
Angela LaFontaine I also wonder about this. Also if you're doing a vertical sign, do you have to cut apart the pieces and do letters individually?
@DesignsbyDenaeCo
7 жыл бұрын
If it is longer than you would just have to find a good breaking point & have the second half cut on a separate paper. Unless you have the roller feeder & a longer roll of the vinyl. Hope this helps.
@nicoles4357
6 жыл бұрын
Angela LaFontaine tape the longer mats together. You can change sizing in the program.
@theresad1904
6 жыл бұрын
Nicole Singleton oh my gosh how friggin smart!!! Girl THANK YOU! Seems simple now you said it but just something that completely never occurred to me! You rock!
I would have used stencil vinyl, that way you can re-use it. and it is not as tacky.
@CuttinCornersVinyl
7 жыл бұрын
I wasn't making any more and I like it sticky so I don't have to worry about my lines being clean. There are many ways to do it. (this is just the way I like). but stencil vinyl is a great product just not one I use that often.
@squiishysquish5980
4 жыл бұрын
It doesn't look tacky at all. It looks amazing.
I have a question if your layering do you do everything the same color of paint
@CuttinCornersVinyl
3 жыл бұрын
What do you mean?
@claudiaguzman3729
3 жыл бұрын
@@CuttinCornersVinyl Let me send it to you
@claudiaguzman3729
3 жыл бұрын
@@CuttinCornersVinyl Do you know how i can send you a picture so you can see it..... Here on KZread
Isn't transfer Paper cheaper than vinyl? Why not just cut the wording on transfer Paper?
IITXME??
If I want the sign for outside...what do I protect it with ?
@chauntinajenkins8038
5 жыл бұрын
Mary Anderson maybe krylon triple thick sealer?
@maryanderson6256
5 жыл бұрын
@@chauntinajenkins8038 thank you
Thanks how do I find you on Facebook?
Love it! How'd you get the heart in the state?
@sarahwyman2829
5 жыл бұрын
I’m guessing she made it in a program on her computer. If you have a cricut machine there’s a program called design space that you could make something like this.
Where do you get what you want it to say from like the lettering
@CuttinCornersVinyl
6 жыл бұрын
Gabriel Salazar I cut it with my machine
@gabrielsalazar4544
6 жыл бұрын
Can I get custom lettering like that from somewhere
@terinaaroni65
6 жыл бұрын
You need a machine that cuts vinyl, like the circuit or silhouette
Cute- but you should add a sealant. I make my own boards but I hand paint with chalk but still to prevent chipping.
@ysmargonzalez5667
5 жыл бұрын
Julia Geuther what sealer do you use? Thanks
And another easy way to remove is get the weeder, that comes with all the different cricut.
how do you make custom vinyl? machine?
@sarahwyman2829
5 жыл бұрын
Any cricut machine will work